Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOSE ASSEMBLY, METALLIC

Active
SPE7M4-26-T-326BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for one metallic hose assembly with NSN 4720015891869 and part number B47860-3, procured under solicitation SPE7M4-26-T-326B by the Department of Defense’s Fluid Handling Division. The item must be delivered in 20 days FOB origin with no variance in quantity, inspected and accepted at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all requirements governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any standard. Palletization and packaging are subject to RP001 DLA Packaging Requirements. The delivery is directed to a U.S. military installation in Kaiserslautern, Germany, identified by the address and SSA code WK4GBW, with shipment logistics referencing DLAD PROC NOTES C19 and C20. The unit of issue is each, priced at $1.00, with a total value of $1.00. All labeling and identification must adhere to government standards, and government identification on non-accepted supplies must be removed. The contract includes specific technical and quality conditions defined by R and I numbers referenced from the DLA Master List, and the original required delivery date is August 5, 2026. The point of contact for the solicitation is Blake Tushar, and the purchase request number is 7017784267.

General Info

One metallic hose assembly, NSN 4720015891869, $1.00, delivery to Kaiserslautern, Germany, by August 5, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-326B for DLA Land and Maritime Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOSE ASSEMBLY,METALLIC
HOSE ASSEMBLY,METAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MISSION SYSTEMS ORCHARD PARK INC 04577 P/N B47860-3
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017784267 0001 EA 1.000
NSN/MATERIAL:4720015891869
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7M4-26-T-326B
SECTION B
PR: 7017784267 PRLI: 0001 CONT’D
BULK BREAK POINT:
WK4GBW
W6FU CLII,IIIP, IV, VII SSA
SSA CLII III IV VII IX BLDG 2371
LUDWIGSHAFENERSTRASSE 31
KAISERSLAUTERN 67657
DE
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WK4GBW
W6FU CLII,IIIP, IV, VII SSA
SSA CLII III IV VII IX BLDG 2371
LUDWIGSHAFENERSTRASSE 31
KAISERSLAUTERN 67657
DE
MARKFOR
WK4GBW
W6FU CLII,IIIP, IV, VII SSA
SSA CLII III IV VII IX BLDG 2371
LUDWIGSHAFENERSTRASSE 31
KAISERSLAUTERN 67657
DE
M/F: (TCN) WK4GBW62120792
RDD: 777
PROJ: 9GU TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/05/2026
SPE7M4-26-T-326B NSN/Part Number: 4720-01-589-1869 Quantity: 1 EA Purchase Request: 7017784267QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326220
New
DIBBS
Rubber Seals and Gaskets SupplyThe contract is for the supply of nonmetallic special-shaped rubber sections intended for defense or industrial applications, requiring full manufacturing capabilities along with proper packaging and FOB Origin shipping in strict compliance with military specifications. The components, described as rubber seals and gaskets, must be produced to exacting standards to ensure performance in demanding operational environments. The work is subcontracted under NAICS code 326220, which classifies rubber product manufacturing, and is managed by the Department of Defense through its DDSP New Cumberland Facility, with performance required at the 17070-5002 location in New Cumberland. All deliveries must meet defined military criteria and be shipped from the manufacturer’s facility, placing responsibility for logistics and quality control squarely on the contractor. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is part of a broader procurement effort to support critical defense and industrial infrastructure needs.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
Manufacturing of Special-Shaped Nonmetallic Rubber SectionsThe contract is for the manufacturing of custom nonmetallic rubber components that must comply with military specifications, ensuring strict adherence to performance, durability, and environmental standards required for Department of Defense applications. The work includes full lifecycle compliance such as shelf-life management, specialized packaging, and accurate labeling to meet DOD regulatory requirements. The components are described as special-shaped, indicating unique geometries or tailored designs for specific military systems or equipment use cases. The solicitation is issued under NAICS code 326220 for rubber product manufacturing and is classified as a subcontract opportunity with a response deadline of August 20, 2026. Performance is required at the New Cumberland facility with ZIP code 17070-5002, operated by the DDSP New Cumberland Facility under the Department of Defense. While no specific point of contact or set-aside details are provided, the posting date of August 9, 2026, indicates an upcoming procurement window for qualified vendors capable of fulfilling complex military-grade rubber component requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
Internal Seals and Elastomer Component SupplyThe contract calls for the supply of Buna-N and fluorocarbon rubber seals, including O-rings and gaskets, specifically designed for integration into a pressure regulating valve. All components must strictly comply with the military specifications MIL-P-25732 and MIL-R-83248, ensuring dimensional accuracy, material integrity, and performance under demanding environmental and operational conditions. The seals are critical to maintaining pressure integrity and system reliability within defense applications, requiring adherence to high-standard manufacturing and quality control protocols. This is a total small business set-aside subcontract under the SBA program, assigned the NAICS code 326220 for rubber product manufacturing. The opportunity was posted on August 9, 2026, with responses due by August 20, 2026, and the place of performance is designated as Bremerton, Washington, with a zip code of 98314-6001. The contracting activity is under the U.S. Department of Defense through the Puget Sound office, and the solicitation is accessible via the DIBBS platform for eligible small businesses to submit proposals.
PUGET SOUND

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
O-RING
Solicitation # SPE7L3-26-T-170E
The contract is for the procurement of 884 O-rings, part number 20315AF, supplied by Falls Filtration Technologies Inc. from Stow, Ohio, under the national stock number 5331-01-079-0875. It is designated as a critical application item and classified as a commercial item, subject to strict compliance with DLA packaging and technical requirements. The O-rings must be free of asbestos as defined in FED-STD-313 and must not contain or come into direct contact with mercury or mercury-containing compounds, except for specific exempted functional uses such as in batteries, fluorescent lights, instrumentation, weapon systems, or chemical reagents authorized by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. All items must be packaged in accordance with MIL-STD-2073-1E and sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the item to ultraviolet light exposure. Marking and palletization must follow MIL-STD-129 and DLA packaging standards respectively. Delivery is FOB origin with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. The required delivery date is 54 days from contract award, with a need ship date of June 13, 2026, and an original required delivery date of June 17, 2026. The shipment must be sent to the DLA Distribution Albany facility at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, as specified in the freight shipping and parcel post addresses. The contract is issued under solicitation SPE7L3-26-T-170E, with a unit price of $0.00 per unit and a total contract value determined by the quantity. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, and adherence to the applicable revision of that master document controls compliance, depending on the acquisition size and timeline. The point of contact is Karen McCarley, with procurement handled under NAICS code 326220 by the Department of
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-034L
This contract is for a single unit of a non-metric hose assembly identified by NSN 4720-01-656-3692 and part number F387TCJSJ9060606-225 from Parker-Hannifin Corporation, under solicitation SPE7M0-26-T-034L. The item must be delivered within five days to Hurlbert Field, Florida, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by DLA’s Master List of Technical and Quality Requirements, which takes precedence. All packaging must be marked and labeled per MIL-STD-129 and palletized according to DLA’s packaging guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Shipping must be done via the fastest traceable means; parcel post is forbidden. The purchase request number is 7017784019, with a required delivery date of August 6, 2026, and the contract is governed by DoD unit of issue standards. Government use identifiers and shipping controls are included for internal tracking, with primary point of contact being Abaigael Masterson at DLA.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE4A0-26-T-4222
This contract is for a single non-mechanical hose assembly identified by NSN 4720-01-713-7766 and part number AE2464689H0264, sourced from Sikorsky Aircraft Corporation with CAGE code 78286. The item must comply with a comprehensive set of technical, quality, and packaging requirements mandated by the Defense Logistics Agency, including adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03 from August 2016, and while item unique identification is not required, the contractor must follow strict configuration control and variance procedures. The product is classified as a Type I shelf-life item with a fixed 120-month (10-year) expiration date, marked with special code 32, and must meet non-tailored quality requirements based on ISO 9001:2015. All manufacturing and inspection activities must follow approved sampling standards—either MIL-STD-1916 or ASQ H1331—with zero non-conformances allowed in the sample unless otherwise specified. Measuring and test equipment used must be calibrated and verified, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with marking and palletization following DLA-specific guidelines; the item is not to be shipped via parcel post and must be delivered using the fastest traceable means. Delivery is required within five days of award, FOB origin, to a designated receiving location at Naval Air Station Fallon, Nevada, with no tolerance for quantity variance. The contract was issued under solicitation SPE4A0-26-T-4222 and is governed by Federal acquisition rules with full accountability for compliance across technical, quality, cybersecurity, and logistics dimensions.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-326Y
The contract is for the procurement of two units of hose, air duct with NSN 4720-01-556-7157 and part number MRP12016, supplied by approved vendors including Mack Trucks, Inc., AMZ Alabama Inc., and BAE Systems Tactical Vehicle Systems LP. Delivery is required within 20 days from the order date under FOB origin terms with no tolerance for quantity variance. The items must be packaged and marked in strict accordance with DLA Packaging Requirements and MIL-STD-129, with packaging standards overriding ASTM D3951 where applicable. The products are designated for delivery to the Navy Expeditionary Logistics Support Group at Williamsburg, VA, with a required ship date of August 6, 2026, and must be shipped by the fastest traceable means, explicitly excluding parcel post. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards. The contract is issued under solicitation SPE7M4-26-T-326Y, with a unit price of $2.00 per unit, totaling a contract value of $4.00, and requires compliance with federal procurement protocols including standardized unit of issue and labeling. Government use codes and shipping identifiers are specified for internal tracking and logistics management.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-327B
The contract specifies the procurement of six nonmetallic hoses identified by NSN 4720-01-581-3730 under solicitation SPE7M4-26-T-327B, with a required delivery within 165 days of award and a delivery point of origin FOB. The item must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence over ASTM standards. Packaging and palletization must comply with DLA’s RP001 requirements, and no variance is permitted in quantity—exactly six units must be delivered. Inspection and acceptance occur at the destination, and the goods must be shipped to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The unit of issue is each, with a total contract value of $6.00 per unit, totaling $36.00. The original required delivery date is March 13, 2027, with a need ship date of February 2, 2027. Transportation requirements are governed by DLAD Proc Notes C19 and C20. The contract incorporates all applicable technical and quality specifications listed in the DLA Master List, and any government identification on non-accepted supplies must be removed per RQ011. The solicitation was posted August 9, 2026, with responses due by August 20, 2026, under NAICS code 326220, and is managed by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M0-26-T-034D
This contract specifies the procurement of a nonmetallic hose assembly with the NSN 4720-01-488-9388 and part number 54001321, supplied by ACS Industries, Inc. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The product is strictly prohibited from containing any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly authorized by the specification. Shelf-life requirements mandate clear marking per MIL-STD-129, including the manufactured, cured, assembled, or packed date alongside the expiration date, given this is a Type I (Code H) item with a non-extendable 12-month shelf life. Packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, with unit packaging using code Q at packing level B, and palletization conforming to RP001; all markings must follow MIL-STD-129, including the special marking code 32 for Type I shelf-life identification. The contract requires delivery of one unit within five days of award, with FOB origin delivery and both inspection and acceptance occurring at the origin. The quantity is fixed with zero variance allowed. The item must be shipped to the Distribution Management Office at Camp Kinser, Okinawa, Japan, via a RDD 999/NMCS shipment with transportation governed by DLAD Proc Note C19 and first destination transfer per C20. It shall be marked for M00172, MWSS 172, with the military freight designation M2022062160034. The required delivery date is August 6, 2026, and the solicitation issued on August 9, 2026, with responses due by August 20, 2026. The item falls under NAICS code 326220 and is procured under the Department of Defense via the Maritime Supply Chain ESOC Buys office, with primary point of contact listed as Abigael Masterson.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
BELT, V
Solicitation # SPE7L5-26-T-4918
The contract pertains to the procurement of a BELT, V with NSN 3030-01-416-1542, requiring a quantity of 29 units at a unit price of $29.00, for a total price of $841.00. The item must be delivered within 135 days from the contract award, FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, prioritizing DLA’s Master List of Technical and Quality Requirements, and palletization must adhere to RP001 standards. The part must be marked per MIL-STD-130N and sourced under critical item source inspection requirements. Technical specifications are governed by TDP Rev A Gen 3 referencing drawing number 19207 12375797 with a revision date of June 17, 2026, despite earlier revisions listed. The delivery address is the DLA Distribution facility in New Cumberland, PA, with a required ship date of January 3, 2027. The solicitation number is SPE7L5-26-T-4918, issued under NAICS code 326220, with Randy Ith as the primary point of contact. Unit of issue is each (EA), and all packaging and labeling must align with specified DLA and DoD standards.
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-946E
This contract pertains to the procurement of six O-rings identified by NSN 5331-00-469-6840, with a delivery deadline of 165 days after award and a response deadline of August 20, 2026. The solicitation, issued under number SPE7L1-26-T-946E by the Department of Defense’s Land Supply Chain, mandates strict adherence to technical and quality requirements referenced from the DLA Master List, with applicable revisions determined by the solicitation or award date. All items must comply with DLA Packaging Requirements and the Contractor Retention of Supply Chain Traceability Documentation directive from August 2016, requiring the contractor to maintain full traceability records throughout the supply chain. The use of ozone-depleting chemicals is strictly prohibited and supersedes any conflicting specification requirements, and all products must be free of asbestos; any alternatives require formal approval per Clause L30 and Provision 4 Conditions. Documentation for source approval requests and removal of government identification from non-accepted supplies must also be followed. The place of performance is specified as New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Robert Warne, reachable via email and phone.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-326J
The contract specifies the procurement of 19 units of hose, air duct with NSN 4720-01-429-6846 and part numbers AD778-02A17 and L0C102804006806 from HBD Industries, Inc and Flexfab LLC respectively, under solicitation SPE7M4-26-T-326J. The item is to be delivered FOB origin within 71 days, with no tolerance for quantity variance, and inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and all DLA Master List of Technical and Quality Requirements, which take precedence, and all containers must be marked and labeled per MIL-STD-129 with unit of issue as EA and quantity per unit pack as specified. Palletization must adhere to DLA packaging requirements for procurement. The delivery address is DLA Distribution Depot Hill at Hill AFB, Utah, with transportation requirements governed by DLAD Proc Notes C19 and C20. The original required delivery date is February 2, 2027, though a need ship date is set for August 6, 2026. The contract is issued under DoD authority with NAICS code 326220 and is managed by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 336412
New
DIBBS
SEAL, ENGINE STARTER
Solicitation # SPE7M4-26-T-326Z
This contract pertains to the procurement of 58 units of a SEAL, ENGINE STARTER with NSN 2995-00-939-8495, supplied by EATON AEROSPACE, LLC under part number 608593. The item is designated as a critical application and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Quality conformance is governed by TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS and QUALITY CONFORMANCE INSPECTION REQUIREMENTS, with inspection sampling mandates following MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. The contract enforces CMMC Level 2 cybersecurity requirements and mandates strict adherence to MIL-STD-129 for labeling and packaging, with palletization compliant with DLA packaging standards. Delivery is FOB origin with a 47-day lead time, and inspection and acceptance occur at the destination. The unit of issue is each (EA), priced at $58.00 per unit, with no variance allowed in quantity. All packaging must be marked and stored per specified protocols, and the items must be delivered to DLA Distribution Cherry Point in North Carolina by the required delivery date of February 19, 2027.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-327X
This contract pertains to the procurement of an O-RING with NSN 5331-00-194-1670, quantity of 1,283 units, under solicitation SPE7M4-26-T-327X, with a required delivery date of February 13, 2027, and a delivery window of 118 days. The item is classified as a critical application product with a non-extendable shelf life of 180 months and is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be pre-approved by the Performance Review Institute at the time of award. Technical and quality specifications are governed by referenced standards including SAE AS3209C and AMS7276J, and all sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for specific exceptions like batteries or sensors explicitly authorized by NAVSEA, and portable devices containing mercury must have shock-proof design with secondary containment. Asbestos is completely banned per FED-STD-313. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling requiring the code 32 to indicate Type I shelf-life status. The product must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. All packaging and shipping must follow DLA Packaging Requirements and IP025 for hazardous materials, with no mercury permitted in any packaging materials. The item is to be delivered FOB origin to the designated receiving facility in Texarkana, TX, with a 0% variance allowed on quantity. Transportation and freight procedures are governed by DLAD PROC NOTES C19 and C20. The contract is governed by DLA’s master list of technical and quality requirements, with compliance controls tied to the solicitation issue date. The sole point of contact is Freddie Vazquez, with the purchase request number 7017437682 and unit price of $1,283.00 for the total contract value.
Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
TORQUE TOOL, SEA
Solicitation # SPE7M4-26-T-326C
The contract pertains to the procurement of two torque tools, identified by NSN 4921-01-605-4834, under solicitation SPE7M4-26-T-326C, issued by the Fluid Handling Division of the Department of Defense. Delivery is required within 20 days after award, with performance to occur in Keyport, Washington, 98345-7610. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) to meet the cybersecurity requirements. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and questionnaire, and have received explicit approval from the Defense Logistics Agency. The North American Industry Classification System code is 332994, and the primary point of contact is Rory O’Reilly at DLA.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, TUBE REPAIR
Solicitation # SPE7M4-26-T-327H
The contract specifies the procurement of 2,182 units of a laminated phenolic tube repair plug with a nominal size of 3/8 inch, all of which must comply with the salient characteristics and sections 3.4 through 3.7 of specification A-A-59949. Each unit must meet rigorous quality standards, and the supplier is required to provide a Certificate of Quality Compliance for every manufacturing lot, with each certificate prepared in accordance with the Supplemental Quality Assurance Provision. For deliveries subject to government inspection at source, the certificate must be available for review by the government representative upon material presentation, and compliance with COQC requirements enables the government to sign off on the WAWF receiving report provided the documentation is properly uploaded as an attachment to the Production CLIN in iRAPT. An electronic copy of each COQC must be submitted via the Attachment tab of the Receiving Report in the iRAPT system for government record retention. The item is identified by NSN 4730-00-289-0593 under solicitation SPE7M4-26-T-327H, issued by the Fluid Handling Division of the Department of Defense, with a delivery deadline of 165 days after award. The purchase request number is 7017775437, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. All data required by the contract, including packaging and certification documentation, is to be included in the quoted price. The primary point of contact is Blake Tushar, reachable via email and phone, and the solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The NAICS code for this procurement is 332996, indicating it falls under other miscellaneous fabricated metal product manufacturing.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, TUBE FITTING
Solicitation # SPE7M4-26-T-327W
This contract specifies the procurement of a locknut for tube fittings made from corrosion-resistant steel (CRES) with passivation, sized for 0.312-inch nominal tubing, in compliance with SAE Aerospace standards AS4841 and AS5179D. The item is classified as a critical application component and must be sourced exclusively from manufacturers or assemblers listed on the Performance Review Institute’s Qualified Manufacturer List (QML) or Qualified Products List (QPL). All production and assembly must adhere to strict accreditation requirements, and material must not contain mercury or mercury compounds except under specific, limited exemptions for functional devices like sensors, batteries, or instruments. Ozone-depleting chemicals are strictly prohibited. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA’s packaging requirements. The NSN 4730007345774 is procured in two separate line items totaling 1,140 units, with delivery required within 18 days FOB origin. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. Delivery is split between two DLA depots—Tinker AFB and Robins AFB—with specific shipping addresses and required ship dates of September 8, 2026, and May 13, 2027, respectively. The solicitation number is SPE7M4-26-T-327W, and compliance with all referenced technical and quality requirements from the DLA Master List is mandatory.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
COUPLING, TUBE
Solicitation # SPE7M3-26-T-8151
The contract is for the procurement of a coupling tube, part number DPL4514T10, manufactured by Designed Metal Connections Inc, identified by NSN 4730016464133, with a total quantity of six units. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must follow MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization adhering to RP001, and all items must be marked and labeled accordingly. The product is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information. Delivery must be made FOB origin within 44 days of contract award, with inspection and acceptance occurring at the destination. The sole delivery address is DLA Distribution Cherry Point in North Carolina, and the unit of issue is each (EA), with a total contract value of $36.00. The solicitation, issued under contract number SPE7M3-26-T-8151, was posted on August 9, 2026, with a response deadline of August 20, 2026, and the original required delivery date is January 30, 2027. Point of contact is William Cain, with available support details provided.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-26-T-8116
The contract is for 63 units of a 70-30 copper-nickel elbow pipe with a 45-degree flow angle and 2-inch nominal pipe size featuring socket-weld ends, identified by NSN 4730-01-436-0893. The item is procured under solicitation SPE7M3-26-T-8116 with a firm delivery deadline of 144 days after order, and the procurement is managed by the Department of Defense’s Fluid Handling Division. The supplier must comply with DLA packaging requirements, ensuring all documentation and materials meet specified standards. Each shipment must be accompanied by a Certificate of Quality Compliance (COQC), with one copy provided per manufacturing lot if multiple lots are involved, and each certificate must adhere to the Supplemental Quality Assurance Provision. The supplier is required to make the COQC available to Government inspectors at the source for review during material acceptance and must upload electronic copies of all certificates to the iRAPT system via the Receiving Report’s Attachment tab for official records. Government representatives may finalize acceptance via WAWF only after verifying proper COQC compliance and proper documentation upload. The contract was posted with a response deadline of August 20, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with Judy Mojica listed as the primary point of contact for inquiries and coordination.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
SEAL, CONICAL, FLARED
Solicitation # SPE7M3-26-T-8148
The contract pertains to the procurement of 50 units of a conical flared seal, identified by NSN 4730-01-610-3433 and part number AS4824N02, manufactured in compliance with SAE AS4824B Revision B dated November 1, 2007. Delivery is required within 20 days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and methods defined, including intermediate container details and palletization per DLA requirements. The item is subject to strict prohibition of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for attributes are designated as VII, IV, and II for critical, major, and minor characteristics respectively. The contractor must comply with CMMC Level 2 self-assessment requirements and manage configuration changes through formal engineering change proposals. A certificate of conformance is authorized unless overridden by a quality assurance letter. The delivery address and marking instructions are specified for Hoogerheide, Netherlands, with freight handled by DNEM00. The contract is issued under full and open competition, and all technical and quality requirements referenced are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-327A
This contract pertains to the procurement of a nonmetallic hose assembly designated by NSN 4720-01-371-1331 and part numbers AAEA0600, FA2406EGG0633AA, and 23511467, to be supplied by Rolls-Royce Solutions America Inc and Danfoss Power Solutions II LLC. The delivery requirement is for 71 units, with a strict quantity variance of plus or minus zero percent, and delivery must be completed within 165 days from the contract date, FOB origin. Inspection and acceptance are to occur at the destination, and the items must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 without any special marking codes. The packaging and palletization must comply with DLA’s packaging requirements, using specified methods for preservation, wrapping, and unit containment as outlined in the contract’s packaging data. The contract is issued under solicitation SPE7M4-26-T-327A with a response deadline of August 20, 2026, and a posted date of August 9, 2026. The end delivery date is set for February 2, 2027, replacing the original required delivery date of January 7, 2027. The delivery destination is DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston, AL 36201-4199, with transportation instructions governed by DLAD Proc Note C19 for general shipping and C20 for first destination handling. The unit of issue is each, priced at $71.00 per unit, totaling $5,041. The contract references technical and quality requirements from the DLA Master List, which apply based on solicitation and award timelines. The point of contact is Blake Tushar, and the NAICS code is 332999 for other miscellaneous fabricated metal product manufacturing.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, ENGINE FU
Solicitation # SPE7M4-26-T-327L
This contract is for the procurement of a Parts Kit, Engine Fuel, identified by NSN 2910-00-355-7669 and part number 5199734, with a quantity of 190 units. The item is classified as a critical application item and must be supplied by either Rolls-Royce Solutions America Inc or Federal-Mogul Corporation DBA, as specified. The contract mandates strict compliance with DLA packaging and preservation standards per MIL-STD-2073-1E, Appendix D, for kits, and requires marking consistent with MIL-STD-129 without special marking codes. Packaging must adhere to DLA’s procurement requirements including palletization guidelines, and all items must be delivered FOB origin with zero variance allowed in quantity. The delivery schedule allows 191 days from the contract award, with a required ship date of February 28, 2027, and an original delivery deadline of April 6, 2027. The destination for delivery is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation protocols follow DLA procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and requires compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Suppliers must address potential casting or forging needs by submitting a request to DLA if special tooling is required. The procurement is conducted under a total small business set-aside, with the solicitation number SPE7M4-26-T-327L, and the unit of issue is each (EA). The unit price is $190.00, resulting in a total contract value of $36,100. Inspections and acceptance occur at the destination, and the contracting office is the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact. All documentation and compliance obligations must align with the latest applicable versions of referenced standards in effect as of the solicitation or award date.
Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CONN ROD RH HND SD
Solicitation # SPE7M4-26-T-327T
The contract pertains to the procurement of a right-hand connecting rod for a handle-side application, identified by part number 803-6397269 and NSN 2040014549209, with a quantity of 16 units to be delivered FOB origin within 165 days. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, enforcing zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified features are treated as major. The product must be free of ozone-depleting chemicals and must not contain or come into direct contact with mercury or mercury compounds except for specific exempted applications like batteries, instruments, or sensors as defined by NAVSEA; portable mercury-containing devices must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with unit packaging including preservative methods, no cushioning material, and defined container codes, while palletization follows DLA packaging guidelines. Marking is to be standard with no special codes applied, and delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California. The contract requires full and open competition with no set-aside, and pricing is fixed at $16.00 per unit for a total value of $256. The solicitation, issued under contract number SPE7M4-26-T-327T, was posted on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is February 10, 2027, with a need ship date of February 2, 2027.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
RESTRICTOR UNIT, FLU
Solicitation # SPE7M3-26-T-8147
The contract is for a single Restrictor Unit, Fluid Flow, with NSN/Part Number 4730-01-535-6415, under solicitation SPE7M3-26-T-8147, issued as a Total Small Business Set-Aside under NAICS code 333998. The item is subject to strict export control regulations under ITAR or EAR, prohibiting any disclosure or transfer of technical data to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is required, and only DLA contractors with approved U.S./Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and authorized access may receive the technical information. The contract mandates adherence to DLA packaging standards, removal of government identification from non-accepted supplies, and incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date. The supplier must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified as a third-party assessment organization and must deliver the item within 165 days of award to New Cumberland, Pennsylvania, with William Cain designated as the primary point of contact.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details