Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HOSE ASSEMBLY, METALLIC

Active
SPE7M4-26-Q-0887Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a metallic hose assembly designed for use between the gearbox and hydromechanical unit, identified by NSN 4720-01-333-0378, with a quantity of 77 units required. This item is classified as a U.S. Army flight safety part and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The procurement is governed by DLA packaging standards, supply chain traceability obligations under DLA Directive Procurement Note C03 from August 2016, and mandatory configuration change management procedures requiring formal engineering change proposals for any deviations. All supplied items must be properly marked for physical identification, and contractors must retain full traceability documentation throughout the supply chain. Technical data associated with this assembly is subject to export controls under ITAR or EAR, restricting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce; only DLA-approved contractors with JCP certification, completed export control training, and approved access permissions may handle such data. The solicitation, issued under number SPE7M4-26-Q-0887, is a total small business set-aside with a response deadline of August 10, 2026, and requires delivery within 493 days after order. Point of contact for inquiries is Glenda Gustafson of the Department of Defense’s Fluid Handling Division.

General Info

Procure 77 metallic hose assemblies for U.S. Army flight safety, per DLA standards, ITAR/EAR controls, small business set-aside, delivery in 493 days.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE7M4-26-Q-0887.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Glenda Gustafson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOSE ASSEMBLY,METALLIC
(HOSE ASSY., GEARBOX TO HYDROMECHANICAL UNIT). U.S. ARMY FLIGHT SAFETY PART.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire
SPE7M4-26-Q-0887
SECTION B
SUPPLY/SERVICE: 4720-01-333-0378 CONT'D
(both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4720-01-333-0378 Quantity: 77 EA Purchase Request: 7017234967QTY: 77 Delivery: 493 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332912
New
DIBBS
Precision Valve Manufacturing and SupplyThe contract calls for the manufacture and supply of a fluid pressure regulating priority valve engineered to meet stringent military-grade standards for performance, durability, and traceability within hydraulic or pneumatic systems. The valve must be built to operate reliably under extreme conditions, ensuring precise pressure control and system integrity critical to defense applications. All components and manufacturing processes must adhere to rigorous documentation and quality control protocols to support full lifecycle traceability and compliance with defense procurement requirements. The solicitation, issued by the Fluid Handling Division of the Department of Defense, is classified as a subcontract under NAICS code 332912 and requires proposals to be submitted by July 30, 2026. The place of performance is set at Tracy, California, with a ZIP code of 95304-5000, indicating the location where deliverables must be fulfilled or inspected. The timeframe is highly compressed, with a response deadline just three days after posting, signaling an urgent operational need. This effort supports critical defense infrastructure, and suppliers must demonstrate capability in high-reliability precision valve production with proven experience in military or aerospace environments.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVEThis contract is for the procurement of a STEM fluid valve with the NSN 4820-01-029-9238, requiring 17 units to be delivered within 164 days under solicitation SPE7M4-26-T-287U. The items are specifically identified as Curtiss-Wright electro-mechanical part numbers 3009G58, 3009G58-001, 781E827P41, and 958E350, classified as critical application items. The contract strictly prohibits the intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment barrier as per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, utilizing approved methods including preservative treatment AE, class 1 packaging material, GC wrapping, and EC unit containers without intermediate containers, with parcel post and freight shipping directed to DLA Distribution at the New Cumberland, PA facility. Delivery is FOB origin with zero variance permitted in quantity, and inspection and acceptance occur at destination. The contract includes adherence to DLA packaging requirements and references the DLA Master List of Technical and Quality Requirements for applicable technical and quality standards identified by R or I numbers. The purchase price is $17.00 per unit for a total of $289.00, with a required ship date of January 19, 2027, and an original delivery deadline of October 15, 2027.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
VALVEThe contract solicitation SPE7M1-26-T-210D seeks the procurement of two brass body, stainless handle, 3/4 inch port pneumatic valves with NSN 4820016024464, to be delivered within five days of award to the Distribution Management Office in Jacksonville, Florida. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard, and palletization must follow RP001: DLA Packaging Requirements for Procurement. All packaging and labeling shall comply with MIL-STD-129, including barcoding per GS1 DataBar or USS-128 standards, with unit of issue and quantity per unit pack strictly adhering to contract specifications. The valve must not contain mercury or mercury compounds except in functional applications such as batteries, fluorescent lamps, sensors, or instruments, and any mercury-containing portable devices must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB origin, inspection and acceptance occur at destination, and no quantity variance is permitted. The contract mandates electronic invoicing through WAWF and prohibits the use of parcel post, requiring shipment by the fastest traceable means. The solicitation incorporates multiple Federal Acquisition Regulation clauses covering equal opportunity, combating human trafficking, employment eligibility verification, sustainable procurement, hazardous materials identification, contract type, small business representation, intellectual property, cyber incident reporting, safeguarding defense information, whistleblower rights, prohibition of hexavalent chromium and toxic materials, and restrictions on defense telecommunications equipment. Offerors must provide their Unique Entity Identifier and CAGE code, and represent their small business status, including any socioeconomic designations such as WOSB, HUBZone, or SDVOSB, and disclose any involvement with covered defense telecommunications equipment. No contract price is listed in the line item, and the basis of award is presumed to be Lowest Price Technically Acceptable given the simplified nature of the acquisition and absence of complex evaluation factors. The response deadline is July 27, 2026, with deliveries due by July 14, 2026, and all proposals must be submitted electronically via DIBBS. No contract options, key personnel requirements, or security clearances are specified, and no attachments or special requirements beyond those detailed in the packaging, labeling, materials, and compliance clauses are present.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
VALVE, SOLENOIDThe contract specifies the procurement of ten bronze flanged 3-way solenoid valves with a 1 1/2 inch IPS connection, rated for 75 PSI and 120 volt AC, identified by NSN 4810-01-312-3996 and part number AE3352170001 from Leslie Controls, Inc. The item is classified as a critical application item and must comply with strict technical and quality standards incorporated from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award dates. The valves are subject to prohibitions on ozone-depleting chemicals and mercury or mercury-containing compounds, except for specific functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. All packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including the use of noncorrosive plastic plugs to seal openings and prevent contamination, with units packed in reusable containers designed to immobilize the valve adequately. Marking requirements follow MIL-STD-129, including serial numbers on all container levels, special markings for orientation and handling, and the reusable container code. The product is to be shipped FOB origin with a 730-day delivery window to the Defense Logistics Agency Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The purchase request is tied to a specific government need with a ship date of February 25, 2027, and compliance with all configuration change management and variance procedures is mandatory.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in about 1 hour
View Details
NAICS: 332912
New
DIBBS
VALVE, ROTARY, SELECTThe contract specifies the procurement of six rotary directional control valves with NSN 4810-01-247-9864 and part number U107959440 from LESLIE CONTROLS INC, under solicitation SPE7M4-26-Q-0868. The valves are classified as a critical application item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific exceptions such as functional mercury in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. All supplies must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129, using the specified packaging data and unit of issue. Delivery is required 730 days after award, FOB origin, with inspection and acceptance occurring at destination. The shipment must be palletized per DLA packaging requirements and sent to the designated receiving warehouse in Tracy, California. The government's required delivery date is November 18, 2027, and the contract includes specific transportation instructions per DLAD procedural notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in about 1 hour
View Details
NAICS: 332912
New
DIBBS
VALVE, LINEAR, DIRECTIONThis contract specifies the procurement of four linear directional control valves, identified by NSN 4820-01-146-3561 and part numbers DLN-3, DLN-3X, DLN3X, and Y101912613 from Leslie Controls, Inc. The item is classified as a critical application component requiring full compliance with MIL-STD-130 for Item Unique Identification and the DFARS clause 252.211-7003. Strict prohibitions apply against the intentional addition or direct contact of mercury or mercury-containing compounds with the hardware, except for specific exceptions including functional mercury in batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents approved by NAVSEA; any permitted mercury-containing devices must be shockproof and feature a secondary containment barrier as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001 requirements, with marking following MIL-STD-129 and no special marking codes. The item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with delivery due 730 days after award. Inspection and acceptance occur at destination, with FOB origin terms and a zero percent quantity variance. All technical and quality standards referenced are governed by the DLA Master List of Requirements, with revision control dependent on acquisition size and amendment dates. Transportation and shipping logistics follow DLAD procedural notes and the specified unit of issue standards.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in about 1 hour
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThe contract pertains to the procurement of five regulating valves for fluid pressure, each with a 1-1/4 inch size, designed for use with salt water at a maximum pressure rating of 250 psi and an outlet pressure range of 25 to 60 psi. All materials must be mercury-free except for seat rings, which are exclusively permitted to be manufactured from Monel alloy QQ-N-281 Class A or Nickel-Copper-Silicon alloy ASTM A494/A494M M25S. The valves must be produced using a metal casting process requiring specialized tooling, and compliance with the latest revision of Federal Specification MIL-V-3 is mandatory for preservation and packaging. Packaging requirements follow MIL-STD-2073-1E, with preservation method code ZZ requiring Level A preservation as defined in the commodity specification, and marking must conform to MIL-STD-129 with no special markings required. The product is designated by NSN 4820-01-313-7667 and must be delivered FOB origin to the DLA Distribution facility at DDSP New Cumberland, PA, within 104 days after order placement, with a required ship date of February 4, 2025. No quantity variance is permitted. The contract prohibits the intentional use of mercury or mercury-containing compounds unless functionally essential in batteries, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, in which case a second containment boundary is mandatory per NAVSEA 5100-003D. Ozone-depleting chemicals are banned, and hazardous materials must be labeled in accordance with 29 CFR 1910.1200 and DFARS 252.223-7001, with Safety Data Sheets submitted pre-award. Radioactive materials exceeding specified thresholds require prior notification and labeling. The acquisition is a total small business set-aside under FAR 19.5, with NAICS code 332912. Payment must be submitted electronically via Wide Area WorkFlow, and the contractor is subject to multiple DFARS and FAR clauses including cybersecurity safeguards, combating trafficking in persons, employment eligibility verification, sustainable products, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. The offeror must provide a Unique Entity ID and CAGE code and affirm small business status, including any applicable socioeconomic designations.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThe contract is for the procurement of three valve, regulating, fluid pressure units with NSN 4820-01-423-4883 and part number YB2326P792 from LESLIE CONTROLS, INC., under solicitation SPE7M4-26-Q-0879. The item is classified as a critical application item and must comply with exacting specifications including prohibitions against intentional introduction of mercury or mercury-containing compounds, except for approved exceptions such as functional uses in batteries, sensors, weapon systems, or reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The contract specifies a firm fixed price with zero variance allowed in quantity, and delivery is required 730 days after award, with inspection and acceptance occurring at destination. Packaging must adhere to MIL-STD-2073-1E with prescribed methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 with no special marking required. The delivery address is the DLA Distribution facility in New Cumberland, PA, and transportation logistics are governed by DLAD_PROC_NOTES C19 and C20. The purchase request is 7011616554, with a scheduled ship date of June 29, 2026. All technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in about 1 hour
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThis contract specifies the procurement of a 2-inch diaphragm control valve classified as CLASS DDLN-3 with code 22J5J2RL and 150 lb Navy flanges per ASA B16.24, manufactured by Leslie Controls, Inc. under part number Y101812720. The item is designated as a critical application component and must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the valve, except for specific exempted uses such as functional mercury in batteries, fluorescent lights, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment barrier per NAVSEA 5100-003D. The contract mandates a firm fixed price with zero variance in quantity, requiring exactly seven units to be delivered within 730 days from the award date. Inspection and acceptance occur at the destination, with FOB origin terms applying. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with no special marking required, and palletization must follow DLA procurement packaging requirements. The item is to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedures C19 and C20. The NSN is 4820-01-005-6893, and the associated purchase request number is 7007001773, with a required ship date of September 28, 2025. The solicitation was issued under contract number SPE7M4-26-Q-0870, with contract data identifying the Department of Defense’s Fluid Handling Division as the contracting agency and David Jacques as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in about 1 hour
View Details
NAICS: 332912
New
DIBBS
VALVE, BUTTERFLYThe contract specifies the procurement of 17 butterfly valves identified by NSN 4820-01-311-0960 and part number YCM70821 from Leslie Controls, Inc., with strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is classified as a critical application and requires Item Unique Identification (IUID) compliant with MIL-STD-130 and the DFARS 252.211-7003 clause. Mercury and mercury-containing compounds are explicitly prohibited unless functionally essential in batteries, fluorescent lights, specialized instruments, weapon systems, or NAVSEA-specified reagents; even then, portable devices containing mercury must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and DLA packaging guidelines, with marking in accordance with MIL-STD-129 and no special marking code applied. Palletization and parcel post delivery are directed to the DLA Distribution San Joaquin facility in Tracy, California. The contract mandates a zero variance in quantity, with inspection and acceptance occurring at the destination. Delivery is required within 730 days after the award date, with free on board terms set at origin. Transportation and shipping instructions follow DLA procedural notes C19 and C20, and the solicitation is issued under contract number SPE7M4-26-Q-0869 with a response deadline in 2026.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in about 1 hour
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVEThe Defense Logistics Agency is soliciting one unit of a STEM fluid valve under solicitation SPE7MC-26-T-137G, with delivery required within 20 calendar days ADO to the USS NORTH CAROLINA SSN-777 at FPO AP 96673, and a final delivery deadline of July 17, 2026. The item is identified by NSN 4820-01-355-0268 and is subject to strict export control under ITAR or EAR, prohibiting any unauthorized disclosure of technical data to foreign persons, whether within the U.S. or abroad, with DFARS 252.225-7048 governing compliance. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of DLA’s export control training and questionnaire, and formal authorization from DLA. Contract performance must adhere to MIL-STD-2073-1E for packaging and preservation using Clng/Dry method with specified materials, and MIL-STD-129 for labeling and barcoding, including the Uniform Logistics Label. Hazardous materials must comply with 29 CFR 1910.1200 and other applicable federal regulations, with labels requiring prior submission and approval. The contractor must meet cybersecurity requirements under NIST SP 800-171 and Basic Safeguarding of Covered Contractor Information Systems, with CMMC Level 2 certification mandatory for third-party assessors. Inspection and acceptance occur at destination under FAR 52.246-2, requiring the contractor’s quality system to conform to SAE AS9003 or tailored ISO 9001. Invoicing must be submitted electronically through Wide Area WorkFlow, and the contract includes clauses governing small business representation, accelerated payments to small subcontractors, contract modification pricing, and prohibition of restrictive confidentiality agreements. The solicitation is open to all offerors regardless of size status, though socioeconomic certifications must be completed, and the contract type remains unspecified, with pricing not filled in the CLIN. All proposals must be submitted electronically via DIBBS by July 30, 2026, and the contracting officer representative is Paula McClary, with contact information provided.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThe contract pertains to the procurement of 13 units of a fluid pressure regulating valve, specifically identified as a priority valve with the NSN 4820-01-070-5655, intended for use on U.S. Navy vessels including the Trident submarine with the Worthington Model 13NL45 and surface ships with the Model 20NL30. The item is governed by DLA packaging and technical requirements referenced through the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Strict prohibitions against the intentional use of mercury or mercury-containing compounds apply to all furnished hardware, except in specific exempted applications such as functional mercury in batteries, fluorescent lights, sensors, controls, weapon systems, or chemically specified reagents by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract also mandates the removal of government identification from non-accepted supplies. The solicitation, issued under number SPE7M4-26-T-195J, was posted on July 27, 2026, with responses due by July 30, 2026, and requires delivery within 216 days after order. The North American Industry Classification System code is 332912, and the contracting office is the Department of Defense, Fluid Handling Division, with performance and delivery obligations centered in Tracy, California, 95304-5000. Primary point of contact is Blake Tushar, reachable via email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity for Controlled Unclassified Information (CUI)This contract requires the implementation of NIST SP 800-171 security controls and compliance with DFARS 252.204-7012 to safeguard Controlled Unclassified Information within contractor systems that handle technical or logistics data for the Department of Defense. The work is scoped as a subcontract under the FLUID HANDLING DIVISION, with performance designated at a location in Tracy, California, zip code 95304-5000. The solicitation is categorized under NAICS code 541512, indicating it involves computer systems design and related services. The response deadline is strictly set for July 30, 2026, with the solicitation published on July 27, 2026, leaving a brief window for submission. Ensuring robust cybersecurity measures to protect CUI is a non-negotiable requirement, and all systems must be configured, monitored, and reported in accordance with federal cybersecurity standards applicable to defense contractors.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract pertains to the classification, labeling, and documentation of hazardous materials in accordance with DFARS 252.223-7001 and OSHA’s Hazard Communication Standard, requiring full adherence to the Globally Harmonized System of Classification and Labelling of Chemicals. This includes the proper management of Safety Data Sheets, accurate labeling of containers, and maintaining comprehensive documentation to ensure regulatory compliance across all handling and storage operations. All activities must align with federal defense procurement requirements and workplace safety standards to mitigate risks associated with hazardous substances. The subcontract is issued by the Fluid Handling Division under the Department of Defense, with performance required at a location in Tracy, California, ZIP 95304-5000. The solicitation was posted on July 27, 2026, and responses are due by July 30, 2026. It falls under NAICS code 541620, indicating it relates to management, scientific, and technical consulting services, specifically emphasizing environmental and safety compliance functions. This engagement is critical for ensuring consistent, legally compliant hazardous materials management within defense-related operations.
Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 323111
New
DIBBS
Military-Compliant Marking and BarcodingThe contract requires adherence to MIL-STD-129 standards for the application of precise markings and 2D Data Matrix barcodes on packaging and individual items to ensure full logistics traceability and seamless integration with the Defense Logistics Agency systems. This work is critical for maintaining accurate inventory control, supply chain visibility, and compliance with Department of Defense requirements across all stages of distribution. All labeling must meet federal specifications for durability, readability, and data encoding to support automated scanning and real-time tracking in military logistics environments. The solicitation is classified as a subcontract with a Naics code of 323111, indicating an emphasis on printing and related support activities. Performance is specified to occur in Tracy, California, with a zip code of 95304-5000, and the responsible agency is the Fluid Handling Division under the Department of Defense. The response deadline is strictly set for July 30, 2026, with the posting date listed as July 27, 2026, suggesting a rapid evaluation and award timeline. Contractors must be prepared to demonstrate proven experience with military compliance, data matrix generation, and high-volume labeling operations under tight deadlines.
Commercial Printing (except Screen and Books)

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of valve components in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring protection against corrosion, shock, and moisture during transit and long-term storage. All packaging methods must adhere to military-grade specifications to maintain component integrity under demanding environmental conditions, with detailed procedures for material selection, cushioning, sealing, and labeling to meet defense logistics requirements. The work is subcontracted under the NAICS code 561910 and is designated for performance at Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 27, 2026, with a response deadline of July 30, 2026, and is managed by the Fluid Handling Division of the Department of Defense.
Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
STRAINER, SEDIMENTThe contract pertains to the procurement of 135 units of a sediment strainer, identified by NSN 4730-01-507-2882 and part number 1340130, under solicitation SPE7M3-26-T-7469, issued by the Defense Logistics Agency’s Fluid Handling Division. Deliveries are split between two CLINs: 110 units to be delivered to DLA Distribution San Diego, California, and 25 units to DLA Distribution Cherry Point, North Carolina. All items must be delivered within 68 days of order issuance, with the original required delivery date set for June 7, 2027, and a need ship date of October 4, 2026. The contract specifies FOB destination delivery terms, with inspection and acceptance occurring at the destination locations. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements supersede this standard. Marking and labeling must adhere to MIL-STD-129, including Data Matrix barcodes and all prescribed data fields such as NSN, lot number, and quantity. Palletization must follow RP001: DLA Packaging Requirements for Procurement, and the unit of issue is each, with no variance allowed in quantity. The contract incorporates multiple FAR and DFARS clauses governing compliance with labor, safety, cybersecurity, and procurement integrity standards. Key clauses include those related to combating trafficking in persons, employment eligibility verification, hazardous material identification, sustainable products, and safeguarding contractor information systems. The contractor must ensure compliance with the Hazard Communication Standard and the prohibition on hexavalent chromium use. Electronic invoicing is mandated through Wide Area WorkFlow (WAWF), with payment requests tied to the DoDAAC system. The contract type is not specified at this stage but will be determined upon award under clause 52.216-1 Alternate I. Offerors are required to provide Unique Entity Identifiers and certify their small business or socioeconomic status, including participation in programs such as HUBZone, SDVOSB, WOSB, or EDWOSB. Proposals must be submitted via the DIBBS portal by the stated deadline, with technical and administrative inquiries handled through designated DLA contacts. The solicitation emphasizes strict adherence to documentation, marking, and delivery protocols with no tolerance for deviations in quantity or packaging standards.
Other Support Activities for Air Transportation

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLICThe contract is for the procurement of metallic tubing, specifically 27.54 linear feet of copper tubing with part number 3P669 and NSN 4710011374340, under solicitation SPE7M4-26-T-266R. Delivery is required 146 days after award, with an original required delivery date of October 14, 2026, and a need ship date of December 21, 2026. The tubing is to be delivered FOB origin in accordance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 for packaging. Packaging and marking must strictly comply with MIL-STD-129 for labeling, bar-coding, unit of issue, and quantity per unit pack, with palletization adhering to RP001: DLA Packaging Requirements for Procurement. The destination for delivery is the DLA Distribution facility in New Cumberland, PA, and all inspections and acceptances occur at the destination point. The contract is governed by a fixed-price contract structure under FAR clauses 52.216-1 Alternate I and 52.246-2, with no price variance permitted. Payment must be processed exclusively through Wide Area WorkFlow (WAWF), and invoicing must follow DFARS requirements. The offeror must hold a valid UEI and CAGE code and complete all required socioeconomic and compliance representations, including those related to trafficking in persons, employment eligibility, sustainable products, hazardous materials, and safeguarding covered defense information under clause 252.204-7012. The solicitation requires electronic submission via DIBBS by July 27, 2026, with the Fluid Handling Division of the Department of Defense as the contracting office, and Rory O’Reilly designated as the primary point of contact. All technical and quality specifications are tied to the latest revision of the DLA Master List effective on the solicitation issue date, with precedence over all other referenced standards.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, TUThe contract is for the procurement of a Straight Tube to Hose Adapter, part number MS24587-24AA, a critical application item governed by MIL-DTL-5070F Revision F dated 08/23/2024 and MS24587E dated 07/20/2023, with Class 3 threads and aluminum alloy construction. The item is listed on the Qualified Products List and must strictly comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. Mercury and mercury-containing compounds are prohibited unless used in exempted functional applications such as batteries, fluorescent lights, sensors, or naval specified reagents, and portable devices containing mercury must include a secondary containment boundary per NAVSEA 5100-003D. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitute chemicals require prior approval unless explicitly authorized by the technical specification. Packaging must adhere to ASTM D3951 unless superseded by DLA requirements, with all items labeled and marked in accordance with MIL-STD-129, including barcoding and hazardous material disclosures, and palletization must follow RP001. The contract includes two line items totaling 692 units, delivered FOB Origin with a 65-day delivery window, inspection and acceptance occurring at the destination. Delivery is directed to two locations: Tinker AFB, Oklahoma, and Robins AFB, Georgia, with no variance permitted in quantity. The contract imposes mandatory compliance with numerous Federal Acquisition Regulation clauses covering cybersecurity, trafficking, employment eligibility, sustainable products, hazardous materials, export control, electronic invoicing via WAWF, and safeguarding covered defense information. Offerors must provide their Unique Entity Identifier and CAGE Code, represent size and socioeconomic status, and disclose any use of covered telecommunications equipment. The solicitation contemplates an automated, low-price technically acceptable award process, with proposals submitted exclusively through DIBBS by the deadline of July 27, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METALThis contract is for the procurement of a metal tube assembly identified by NSN 4710-00-008-9887 and part number K894805 from Meggitt Defense Systems, Inc., with a quantity of ten units required under solicitation SPE7M4-26-T-288X. The item is classified as a critical application component and must comply with stringent quality standards including ANSI/ISO/ASQ 9001:2015 and AS9100, with tailored requirements limited to specific clauses under sections 8.1, 8.2, 8.4, 8.5, 8.6, and 8.7. The procurement mandates adherence to DLA’s master list of technical and quality requirements, and prohibits the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, and designated chemical reagents, which must meet NAVSEA 5100-003D containment standards. Packaging and preservation must follow MIL-STD-2073-1E and MIL-STD-129, with prohibited use of mercury in preservation, packaging, and marking per IP056, and palletization must align with DLA packaging guidelines. The delivery is FOB origin with zero variance allowed, inspection and acceptance occur at destination, and the item must be delivered within 129 days of contract award, with a firm need date of December 15, 2026, and original required delivery by August 19, 2027. All units are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, following prescribed transportation protocols, and the contract was posted on July 27, 2026, with responses due by August 7, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMEThe contract pertains to the procurement of a nonmetallic hose assembly identified by NSN 4720-01-451-8255 and part number 8M3K-08FJXSS-08FJXSS-100IN, with a quantity of three units to be delivered within 87 days from the contract award. Delivery is FOB origin, with inspection and acceptance occurring at the destination warehouse located in Tracy, California. The hose assembly must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, with palletization conducted accordingly. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product except in specific exempted applications such as batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents designated by NAVSEA; where permitted, portable devices must include shockproof construction and a secondary containment boundary as specified by NAVSEA 5100-003D. All packaging must be labeled and marked per federal standards, with the unit of issue specified as each and a quantity variance of zero percent allowed. The contract is issued under solicitation SPE7M4-26-T-288P, with a response deadline of August 7, 2026, and a required ship date of November 3, 2026, and original delivery due by November 22, 2026. Transportation instructions follow DLAD Proc Notes C19 and C20, and the point of contact for inquiries is Blake Tushar of the Department of Defense’s Fluid Handling Division.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
STRAINER ELEMENT, SEDIMThe contract specifies the procurement of a stainless steel sediment strainer element with an 80-mesh filtration capacity, integrated magnets, and brass union fittings, designed for use in the oil lube system of a 2-inch Andale Type 103 BM Duplex Strainer applied to a turbine generator. This is a critical application item identified by part number 128000510013959 and NSN 4730-00-105-0207, supplied by TATE ANDALE, LLC. Strict prohibitions are in place against the intentional inclusion of mercury or mercury-containing compounds in the hardware or its contact surfaces, except for specific authorized exemptions such as functional mercury in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable devices containing mercury must be shockproof and feature a secondary containment. All packaging and preservation must comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, with explicit exclusion of mercury in preservation materials per IP056. Marking follows MIL-STD-129 with no special codes, and palletization adheres to DLA standards. The item is to be delivered FOB origin in a quantity of nine units, with a required delivery date of February 28, 2027, and a lead time of 164 days from issue. Inspection and acceptance occur at destination, with zero tolerance for quantity variance. Delivery is addressed to DLA Distribution San Joaquin in Tracy, California, and the solicitation, issued under contract SPE7M3-26-T-7715, is a Women-Owned Small Business Set-Aside with a response deadline of August 7, 2026.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLICTUBE, METALLIC, STEEL, 0.188 INCH O.D. WITH 0.028 INCH WALL THICKNESS AND 25 FEET LENGTH, IS BEING PROCURED FOR USE IN THE HYDRAULIC BRAKE SYSTEM OF CHRYSLER 1-1/4 TON MODEL M-880 TRUCKS UNDER CONTRACT NUMBER SPE7M4-26-T-266M. THE ITEM IS IDENTIFIED BY NSN 4710008448047 WITH A QUANTITY OF 14 UNITS, EACH PRICED AT $14.00, FOR A TOTAL VALUE NOT FULLY DETERMINED DUE TO INCOMPLETE PRICING DATA IN THE CONTRACT. DELIVERY IS REQUIRED WITHIN 158 DAYS AFTER AWARD, WITH A TARGET DELIVERY DATE OF JANUARY 2, 2027, UNDER FOB ORIGIN TERMS TO THE DELIVERY ADDRESS IN TRACY, CALIFORNIA. INSPECTION AND ACCEPTANCE OCCUR AT THE DESTINATION, AND THE CONTRACT INCLUDES A ZERO VARIANCE ON QUANTITY. PACKAGING MUST COMPLY WITH ASTM D3951, BUT THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS TAKES PRECEDENCE, AND ALL PACKAGING MUST BE MARKED AND LABELED IN ACCORDANCE WITH MIL-STD-129. PALLETIZATION IS REQUIRED TO MEET RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT. THE CONTRACT INCORPORATES MULTIPLE FEDERAL ACQUISITION REGULATION CLAUSES INCLUDING 52.216-1 ALT I FOR CONTRACT TYPE, 52.223-3 FOR HAZARDOUS MATERIAL IDENTIFICATION, 52.227-1 FOR AUTHORIZATION AND CONSENT, 52.232-39 FOR UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS, AND 252.246-7003 FOR SAFETY ISSUE NOTIFICATIONS. ADDITIONAL CLAUSES SUCH AS 252.204-7012 AND 252.240-7997 ADDRESS CYBERSECURITY, SAFEGUARDING COVERED DEFENSE INFORMATION, AND NIST SP 800-171 COMPLIANCE
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details