Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOSE ASSEMBLY, NONMETAL

Active
SPE7LX-26-U-9146Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a nonmetallic hose assembly with NSN 4720-01-582-5006, for a quantity of 460 units, under purchase request 1000238694, with a delivery requirement of 67 days after award. The solicitation, numbered SPE7LX-26-U-9146, was posted on August 3, 2026, with responses due by August 18, 2026, and is classified as a total small business set-aside under FAR 19.5 with NAICS code 326220. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048, including restrictions on disclosure to foreign persons regardless of location. Only contractors approved by DLA with valid US/Canada Joint Certification Program certification, completed export control training, and approved access credentials may handle the controlled technical data. The contract enforces CMMC Level 2 certification for third-party assessors and mandates removal of government identification from non-accepted supplies. All activity is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.

General Info

460 nonmetallic hose assemblies, 67-day delivery, small business set-aside, ITAR/EAR controlled, CMMC Level 2 required.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE7LX-26-U-9146.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOSE ASSEMBLY,NONMETALLIC
HOSE ASSEMBLY,NONMETALLIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) FULL AND OPEN COMPETITION APPLY
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4720-01-582-5006 Quantity: 460 EA Purchase Request: 1000238694QTY: 460 Delivery: 67 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M2-26-Q-0708
This contract specifies the procurement of a nonmetallic hose assembly with the NSN 4720-00-204-2092, quantity of 99 units, under solicitation SPE7M2-26-Q-0708, with a total small business set-aside. Delivery is required 171 days after award, with shipment originating from the contractor and delivered to DLA Distribution in San Diego, CA. The item must comply with stringent technical and quality requirements referenced through the DLA Master List and reinforced by multiple procurement directives including packaging, traceability, and configuration control. Supply chain traceability documentation must be retained by the contractor per DLA Procurement Note C03, and the product must be sourced from a QML or QPL accredited manufacturer or assembler listed on EAUDITNET.COM. The hose assembly is designated a critical application item with a 120-month shelf life that is non-extendable, requiring mandatory shelf-life markings per MIL-STD-129 including manufactured and expiration dates. Mercury and mercury-containing compounds are strictly prohibited except for specific authorized exceptions, and any use must include a secondary containment as defined by NAVSEA 5100-003D. Ozone-depleting chemicals are banned, and substitute chemicals require prior approval. The item must conform to SAE AS629D and SAE AS604 technical data packages with bare part markings including contract number, NAWC CAGE, and part number as per associated drawings. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with no special marking permitted. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all markings must follow MIL-STD-130N. Inspection and acceptance occur at destination, with zero variance allowed in quantity.
NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M2-26-Q-0709
This contract is for the procurement of 50 coils of nonmetallic hose, each 100 feet long, identified by NSN 4720-01-541-7201, under solicitation SPE7M2-26-Q-0709. The items must comply with DLA packaging standards and technical requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions effective at the time of solicitation or award depending on acquisition size. The hose must not contain or come into direct contact with mercury or mercury compounds except for specific authorized uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemically specified reagents, and any portable devices containing mercury must include a second containment boundary as per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and any substitutes require prior approval unless explicitly permitted by the specification. The contract specifies a firm fixed price structure with no variance permitted in quantity, requiring delivery within 100 days after award, with inspection and acceptance occurring at the destination. Products must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletized according to DLA packaging guidelines. The sole delivery and shipping address is the DLA Distribution Center in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes. The solicitation is a total small business set-aside under FAR 19.5, with responses due by August 10, 2026, and a required delivery date of February 26, 2027, supported by purchase request 7017364156.
NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-298G
This contract specifies the procurement of 50 units of nonmetallic hose identified by NSN 4720-01-623-2641 and part number 542-19-97-41 under solicitation SPE7M4-26-T-298G. The delivery must be completed within 20 days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. The hose must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly authorized by the specifications. Packaging must adhere to ASTM D3951, with labeling and marking per MIL-STD-129, and palletization must follow DLA’s RP001 guidelines. The unit of issue is each, priced at $50.00, totaling $2,500. The delivery destination is Fort Campbell, Kentucky, with a required delivery date of July 22, 2026, and the shipment must be sent via traceable freight methods—parcel post is prohibited. All packaging and handling must reflect the designated government supply chain identifiers, including the military shipping point W91LCR 0005 SF BN CO B GSB AWCF SSF. The contract includes mandatory government use codes for tracking and logistics, and the point of contact is Blake Tushar of the Department of Defense’s Fluid Handling Division. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and the applicable NAICS code is 326220 for rubber product manufacturing. Compliance with all technical, packaging, and environmental restrictions is binding and non-negotiable.
FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M0-26-T-027A
This contract is for the procurement of a nonmetallic hose identified by NSN 4720-01-588-0412 and supplier part number 116-369-0586 from West Marine Products, Inc., with a quantity of 10 feet to be delivered within five days of the award. The item is classified as a Type I shelf-life item with a mandatory 120-month (10-year) non-extendable shelf life, requiring clear markings on all packaging levels that include the manufacture, cure, assembly, or packing date along with the expiration or inspect/test date as prescribed by MIL-STD-129. Compliance with MIL-STD-130N for identification marking of U.S. military property is required, and all packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the specification. Delivery is FOB origin with a 10% variance allowed on quantity, and inspection and acceptance occur at the destination. The hose must be shipped by the fastest traceable means, excluding parcel post, to the designated distribution management office in Albany, Georgia. All shipments must be palletized per DLA standards and marked according to MIL-STD-129 with the special marking code 32 indicating Type I shelf-life status. The contract was solicited under SPE7M0-26-T-027A with a required delivery date of July 31, 2026, and includes detailed unit of issue, fiscal data, and government use identifiers for tracking and compliance.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
Federal
HOSE ASSEMBLY,FLEX,
Solicitation # N0010426QFG21
This contract pertains to the procurement of a Flex Hose Assembly designated as Special Emphasis Level I material, critical for use in a SEAL Delivery Vehicle (SDV) system, where failure could result in catastrophic loss of life, ship systems, or the vessel itself. The item must be manufactured strictly in accordance with NAVSEA drawing 8599513-003, with approved source limited to Parker Hannifin Cage 83259, and must comply with MIL-STD-130 for marking and NAVSEA S9086-AD-SOC-030 for toxicity and flammability requirements for non-metallic components. No mercury or mercury compounds may be present, and any nonconformance requires formal waiver or deviation requests submitted via ECDS with classification as Critical, Major, or Minor, each subject to Contracting Officer approval. Configuration control is tightly managed, requiring all Engineering Change Proposals (ECPs) for Class I or II changes to be submitted with full impact analysis covering logistics, operations, and lifecycle costs. The contract mandates adherence to stringent quality assurance protocols; First Article Testing is required, and Objective Quality Evidence must be submitted through WAWF to demonstrate compliance. Government Source Inspection is explicitly excluded, but the contractor must maintain traceability of all materials and provide electronic records of any departures from internal requirements. Packaging must conform to MIL-STD-2073, and all documentation must be handled under strict distribution controls as defined by OPNAVINST 5510.1, with many documents classified as "Distribution Authorized to US Government Agencies and Their Contractors" (C). The contract enforces a 45-day prompt payment window instead of the standard 7 days and requires full compliance with Buy American provisions, Small Business Subcontracting Plans, and the Mandatory Use of Workflow Pro assist module for submissions. The final delivery deadline is set for 210 days after award, and all submissions, waivers, and documentation must be processed through the ECDS portal using a CAC-enabled PKI certificate, reinforcing a secure, digital, and highly regulated procurement process tied to national defense infrastructure.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in 21 days
View Details
NAICS: 326220
New
Federal
HOSE ASSEMBLY, NONMETALLIC NSN: 4720-00-826-4782
Solicitation # N6278626Q0006
This solicitation is a 100% small business set-aside under NAICS code 326220 for the procurement of nonmetallic hose assemblies identified by National Stock Number 4720-00-826-4782, with a quantity of 12 units required. The requirement is issued as a combined synopsis and solicitation using FAR 13.5 simplified procedures and specifies a firm-fixed-price purchase order with delivery to General Dynamics NASSCO at Dock 5 in San Diego, California. Only small business concerns actively registered in SAM with a valid CAGE code and UEI may respond, and no alternate products will be accepted. Offerors must provide the exact manufacturer part number, CAGE code, and, if acting as a reseller, formal documentation proving authorization from the original equipment manufacturer. All proposals must include complete pricing covering destination shipping and handling, along with verified SAM registration confirming small business status. Quotes must be submitted electronically before the deadline of August 11, 2026, and will be evaluated under a lowest price technically acceptable framework. Technical acceptability is determined by strict compliance with the NSN, proper documentation of manufacturer authorization, and active SAM registration. The Government will not consider offers lacking any of these elements, and past performance will be evaluated on a pass/fail basis for standard business risk. The contract incorporates numerous FAR and DFARS clauses covering commercial item acquisition, cybersecurity, Buy American requirements, subcontractor reporting, equal opportunity, trafficking in persons, payment by electronic funds transfer, and item unique identification. Packaging must comply with ASTM D3951 and MIL-STD-129 standards, and all units must be clearly marked with NSN, CAGE code, part number, contract number, and manufacturer information. The successful offeror will be subject to accelerated small business subcontractor payment requirements and must maintain active compliance with all federal reporting and certification obligations through SAM.
Supply Of Shipbuilding Conv And Repair

POSTED

about 13 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326220
New
DIBBS
Hose Assembly Manufacturing and SupplyThe contract requires the manufacture and delivery of four non-metallic hose assemblies identified by NSN 4720-00-836-7003, with strict adherence to military specifications and full traceability throughout the production process. All components and materials must meet established defense standards to ensure reliability and performance under operational conditions. The work is to be performed under a subcontract arrangement, with the place of performance located in Tracy, California, at the zip code 95304-5000. The solicitation falls under NAICS code 326220, indicating the involvement of rubber and plastic hose and tubing manufacturing. The offer deadline is August 13, 2026, and the opportunity was posted on August 2, 2026, by the Fluid Handling Division of the Department of Defense. Full compliance with military requirements and documentation for traceability are mandatory for bid acceptance.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
Precision Rubber Sealing Component ManufacturingThe contract calls for the manufacture and supply of a single O-ring identified by NSN 5331-01-670-1894, designed to meet strict technical and quality standards established by the Defense Logistics Agency. This component must fully comply with all referenced R/I-numbered specifications to ensure dimensional accuracy, material integrity, and performance under demanding operational conditions. The work is classified as a subcontract under NAICS code 326220, indicating it falls within the rubber product manufacturing sector, and is being procured through the Land Supply Chain division of the Department of Defense, with performance required at a designated location in Johnston, Iowa, with the zip code 50131-1824. The solicitation was posted on August 2, 2026, with a formal response deadline of August 13, 2026, allowing potential vendors a limited window to submit proposals. The contract does not specify any set-aside classifications, meaning it is open to all qualified suppliers without restrictions based on business size or ownership type. Although no point of contact is listed, the official portal for submissions and detailed documentation is accessible via the DIBBS platform through the provided URL. Compliance with DLA’s quality assurance protocols and adherence to the defined technical requirements are mandatory for award consideration.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
Nonmetallic Hose Assembly SupplyThe contract seeks the supply of 48 nonmetallic hose assemblies identified by NSN 4720017030478, manufactured to meet military specifications and accompanied by required packaging and labeling as mandated by defense standards. It is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses registered with the SBA are eligible to respond, promoting small business participation in defense procurement. The North American Industry Classification System code 326220 applies, indicating the work falls within plastic product manufacturing, specifically related to plastic pipe and pipe fitting production. Performance of the contract is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all deliverables must be completed and submitted by the response deadline of August 13, 2026. The solicitation was posted on August 2, 2026, under the Fluid Handling Division of the Department of Defense, with no designated point of contact provided, though further details can be accessed via the provided DIBBS portal link.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
Precision Rubber Sealing Component Supply (O-Rings)The contract requires the manufacture or supply of 9,000 military-specification O-rings with strict adherence to defense quality standards, including full material certification and full traceability from raw material to finished product. Each component must meet rigorous performance and durability requirements dictated by military specifications and be packaged in compliance with established defense packaging protocols to ensure integrity during transport and storage. The place of performance is designated as New Cumberland, Pennsylvania with ZIP code 17070-5002, indicating where the deliverables must be shipped or where final inspections and handover occur. The solicitation is classified as a subcontract under NAICS code 326220, which corresponds to rubber product manufacturing, and is issued by the Department of Defense through the LAND SUPPLY CHAIN office. All bids must be submitted by the response deadline of August 13, 2026, with an initial posting date of August 2, 2026, providing a narrow window for qualified suppliers to prepare and submit proposals meeting all technical and compliance criteria.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
Supply of Air Duct Hose (NSN 4720-01-307-7214)The contract calls for the supply of 19 units of air duct hose identified by NSN 4720-01-307-7214, manufactured to meet rigorous military specifications and DLA technical requirements. The item is intended for use by the Department of Defense through its Fluid Handling Division, with performance required at the designated location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation is classified as a subcontract under NAICS code 326220, indicating the production of rubber products, and the offeror must respond by the deadline of August 13, 2026, at 5:00 PM Eastern Time. The posting date was August 2, 2026, indicating a 11-day window for submission, and the contract is accessible via the DIBBS platform at the specified web link for further details and participation.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
Nonmetallic Hose Assembly ManufacturingThe contract entails the manufacture and delivery of three nonmetallic hose assemblies adhering strictly to DLA technical specifications, packaging protocols, labeling requirements, and safety standards. The work is part of a subcontract under the NAICS code 326220, which corresponds to plastic product manufacturing, and is managed by the Fluid Handling Division of the Department of Defense. Performance of the contract is required at Barstow, California, with the ZIP code 92311-5014 designated as the place of delivery and fulfillment. All units must comply with defined military-grade quality and safety benchmarks to ensure operational reliability in their intended applications. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, indicating a short but critical window for submission of proposals. No set-aside type was specified, meaning the opportunity is open to all qualified subcontractors regardless of business size or certification status. While no point of contact is listed, the official DIBBS platform provides the sole channel for accessing the full solicitation and submitting responses via the provided link. Compliance with DLA’s stringent documentation and inspection criteria is mandatory, and failure to meet any technical or procedural requirement will result in disqualification.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 333618
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7LX-26-U-9143
The contract is for the procurement of 3,377 fluid filter elements with part number 4268224 and NSN 2940-01-670-6510, supplied by Parker-Hannifin Corporation under solicitation SPE7LX-26-U-9143. This is a total small business set-aside under NAICS code 333618, with delivery required within 65 days FOB origin and no variance allowed in quantity. The items must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA’s packaging requirements, and all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements take precedence. The filter element is designated a critical application item, and covered defense information may apply. Inspection and acceptance occur at destination, and the unit of issue is each, with a total contract value derived from the listed unit price. The solicitation was posted August 3, 2026, with responses due August 18, 2026, and the point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
Other Engine Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
BAR, EMERGENCY RESCUE
Solicitation # SPE7LX-26-U-9135
The solicitation SPE7LX-26-U-9135 is for BAR, EMERGENCY RESCUE items under a Total Small Business Set-Aside, requiring full and open competition among eligible small businesses, with a NAICS code of 336390 and a quantity of 2,100 units to be delivered within 50 days after delivery order. The item is associated with NSN 2590-01-550-2593 and is subject to strict cybersecurity requirements, including CMMC Level 2 certification for any third-party assessment organization involved, and the handling of Covered Defense Information, which triggers compliance with DLA’s Master List of Technical and Quality Requirements. Technical data related to this item is controlled under export regulations—either ITAR or EAR—and may not be disclosed to foreign persons or entities without prior authorization from the Department of State or Commerce; access is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DLA export control training, and cleared by DLA authorities. Packaging must adhere to DLA standards, and any configuration changes require formal engineering change proposals. All non-accepted supplies must have government identifiers removed, and deviations or waivers must be formally requested. The contract is issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and responses are due by August 18, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9140
The contract pertains to the procurement of 2,907 units of SEAL, PLAIN ENCASED under solicitation SPE7LX-26-U-9140, with a total small business set-aside and a NAICS code of 339991. Delivery is required within 57 days after order, and the item is identified by NSN 5330-01-481-0888. All items must be free of asbestos, and any alternatives must comply with Clause L30 and Provision 4 conditions. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The item must also comply with MIL-STD-130N for identification marking of U.S. military property. Technical and quality requirements referenced by R or I numbers are controlled by the DLA Master List, with revisions governed by the solicitation issue date for simplified acquisitions or amendment date if changed. Covered defense information provisions apply, and government identification must be removed from non-accepted supplies per RQ011. Packaging requirements are dictated by DLA standards, and all deliveries must meet these specifications regardless of shipment type. The point of contact is Theodore Misiolek, reachable via phone and email, with responses due by August 18, 2026, and the solicitation posted on August 3, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HE
Solicitation # SPE7LX-26-U-9152
The contract is for 5,827 self-locking hexagonal nuts with NSN 5310-01-657-3289, sourced under solicitation SPE7LX-26-U-9152, which is a Total Small Business Set-Aside for NAICS code 332722. Delivery is required within 57 days on a FOB origin basis with zero variance allowed in quantity, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards, and must be marked and labeled per MIL-STD-129. Packaging must adhere to RP001 DLA Packaging Requirements, with palletization specifically controlled under those guidelines. The unit of issue is each, and the contract specifies a total price based on a unit price with the quantity provided. Documentation for source approval, configuration changes, and variance requests must follow the referenced DLA processes including RC001, RQ002, and the requirement for a Request for Variance when deviations are proposed. The item is flagged as a Critical Application Item, and DLA direct delivery within the Continental U.S. is confirmed. The point of contact for inquiries is Theodore Misiolek at the Department of Defense’s Strategic Acquisition Program Directorate.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9145
This contract specifies the procurement of an O-ring item identified by NSN 5331-01-479-0634 with a total quantity of 141 handling units, subject to a strict delivery timeline of 73 days under FOB origin terms, with no variance allowed in quantity. The item is classified as a critical application component with a non-extendable shelf life of 180 months under Type I (Code Y) requirements and must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1 using medium duty, waterproof, greaseproof, opaque bags to protect against UV degradation. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 indicating shelf-life compliance. The item is prohibited from containing asbestos as defined by FED-STD-313 and must not come into direct contact with mercury or mercury-containing compounds except for approved functional uses such as batteries, instruments, or sensors specified by NAVSEA, with portable devices requiring shock-proof construction and a secondary containment barrier. Documentation for source approval, removal of government identification from non-accepted supplies, and covered defense information standards are incorporated by reference from the DLA Master List of Technical and Quality Requirements. This solicitation is a total small business set-aside under NAICS code 339991, with the award made through DLA Direct, CONUS, and all deliveries must be made to the destination point for inspection and acceptance. The contract applies to direct vendor delivery, foreign military sales, and stock shipments, and the vendor must meet all packaging, labeling, and material restrictions outlined in DLA’s official directives.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7LX-26-U-9155
This contract specifies the procurement of STRAP, WEBBING under solicitation SPE7LX-26-U-9155, with a total quantity of 5,051 units at a unit price of $5,051.00, delivered FOB origin within 67 days. The item is identified by NSN 5340-01-659-7728 and part number HS404H, and must conform to source-controlled drawings and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. Packing and labeling must comply with MIL-STD-129 and DLA Packaging Requirements, with hazardous material handled per FED-STD-313 and TQ requirement IP025, otherwise commercially packaged per ASTM D3951. The contract prohibits use of Class I ozone-depleting chemicals and requires approval for any substitute chemicals. Configuration changes must follow an Engineering Change Proposal process, and deviations require formal variance requests. Certificate of Conformance procedures are authorized unless suspended by a Quality Assurance Letter of Instruction. Only approved sources listed on the source-controlled drawing may supply the item, though additional qualified sources may be recognized without drawing revision. The procurement is a total small business set-aside under NAICS 332510, with inspection and acceptance conducted at destination and no variance allowed in quantity. All packaging must be palletized in accordance with DLA requirements, and the unit of issue is EA per contract specifications.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7LX-26-U-9154
The contract solicitation SPE7LX-26-U-9154 calls for 112 nonmetallic seals, identified by NSN 5330-01-689-5259, under a total small business set-aside, with a response deadline of August 18, 2026, and delivery required within 97 days of award. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag complying with MIL-DTL-117, Type II, Class C, Style 1, due to the vulnerability of the associated stock numbers to ultraviolet degradation. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance mandatory for all delivery types including direct vendor delivery, foreign military sales, and stock shipments. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with corresponding AQLs of 0.1, 1.0, and 4.0. The seal must be marked in accordance with MIL-STD-130N for U.S. military property identification, and any configuration changes require formal engineering change proposals. Technical data associated with this item is subject to ITAR or EAR export controls, and only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access it. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and covered defense information provisions apply. Drawings are available exclusively during open solicitation via the DIBBS portal, and all work must be performed by a certified small business under NAICS code 339991.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332439
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7LX-26-U-9130
This contract, issued under solicitation number SPE7LX-26-U-9130, is a total small business set-aside for the procurement of 1,667 units of a clamp and loop component with NSN 5340004044098, to be delivered FOB origin within 68 days. The item is classified as a critical application item and must comply with stringent DLA packaging requirements per MIL-STD-2073-1E, including specific packaging codes, materials, and marking standards adhering to MIL-STD-129 without special marking. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and attribute classifications must align with predefined verification levels or AQLs. Mercury and mercury-containing compounds are strictly prohibited in or in direct contact with the supplied hardware unless explicitly exempted for functional uses such as batteries, sensors, or weapon systems, with additional containment requirements for portable devices per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, and all suppliers must ensure compliance with MIL-STD-130N for identification marking. The item is to be delivered to a U.S. destination, subject to zero variance in quantity, with inspection and acceptance occurring at the delivery point. The contract supports small business participation and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.
Other Metal Container Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336991
New
DIBBS
PARTS KIT, FIFTH WHEEL ASSEMBLY
Solicitation # SPE7LX-26-R-0078
The solicitation seeks offers for a Parts Kit, Fifth Wheel Assembly identified by NSN 2510-01-479-0990 under solicitation number SPE7LX-26-R-0078, with responses due by September 3, 2026. Offerors must carefully review and complete all required fields in the Pricing and Delivery Spreadsheet attachment, including their offered CAGE and part numbers, which must align with the approved list provided. The Product Item Description (PID) in the solicitation governs the technical requirements and will be binding throughout the contract’s life unless formally amended by the Contracting Officer, superseding any conflicting information on DIBBS. Packaging and marking specifications are detailed in the attached PID Packaging Marking document, which remains accessible until the solicitation is taken down. Inspection and acceptance points as well as F.O.B. terms vary by NSN and are specified in the Pricing and Delivery Spreadsheet. All deliveries must comply with the specified packaging and marking requirements, and contract awards will be made based on strict adherence to the solicitation’s terms, including accurate completion of all offeror fill-ins and compliance with approved part and CAGE codes.
Motorcycle, Bicycle, and Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
BAR, LATCH
Solicitation # SPE7LX-26-U-9147
This contract is for the procurement of 570 units of a BAR, LATCH with NSN 5340-01-675-0753, issued under solicitation SPE7LX-26-U-9147 as a Total Small Business Set-Aside under NAICS code 332510. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and delivery is required within 61 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Configuration changes require formal engineering change proposals and variance requests. The item involves controlled technical data subject to ITAR or EAR export regulations, meaning unauthorized disclosure—even to foreign nationals within the U.S.—is prohibited. Only contractors with JCP certification, completed DOD export control training, and formal DLA approval may access this data. The contracting office is the Strategic Acq Program Directorate under the Department of Defense, with Theodore Misiolek designated as the primary point of contact.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
PROPELLER SHAFT, VEH
Solicitation # SPE7LX-26-U-9138
The contract is for the procurement of two propeller shafts for vehicle use, identified by NSN 2520016592616 and part number 246478-03 from MACHINE SERVICE INC, under solicitation SPE7LX-26-U-9138. This is a restricted-source item requiring government engineering source approval, and it is designated as a critical application item. All deliveries must comply with DLA packaging requirements and MIL-STD-2073-1E standards, with specific packaging methods, materials, and marking instructions as outlined, including adherence to MIL-STD-129 and the special marking code ZZ-ZZ. The items must be delivered FOB origin within 77 days with no variance permitted in quantity, and inspection and acceptance occur at origin. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly permitted by specification. Configuration changes require formal engineering change proposals or variance requests. Item Unique Identification is not required per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs this exemption. The contract is a total small business set-aside under NAICS code 333613, with a response deadline of August 18, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 213113
New
DIBBS
KNOB
Solicitation # SPE7LX-26-U-9133
The contract pertains to the procurement of 71 knobs identified by NSN 5355-01-461-6920 under purchase request 1000238676, with a required delivery within 54 days of award. The solicitation is issued under contract number SPE7LX-26-U-9133, with a posting date of August 3, 2026, and a response deadline of August 18, 2026. It is designated as a Total Small Business Set-Aside under FAR 19.5, with a NAICS code of 213113, indicating it is targeted specifically for small business concerns. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless modified by an amendment. Government identification must be removed from any non-accepted supplies as per RQ011. The solicitation is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek listed as the primary point of contact via email and phone, and the procurement is conducted through the DIBBS system.
Support Activities for Coal Mining

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details