This Solicitation opportunity from Government of Canada was posted on June 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HOSE ASSEMBLY SET, NONMETALLIC

Closed

W8482-264902/AInternational

Submission Closed06/10/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7MC-26-T-225G

This contract is for the procurement of 78 units of valve cover plates, identified by NSN 4810-01-621-0764. The items are designated as critical application items and must be manufactured according to Technical Data Package Revision A, General 3, based on drawing 16236 RE-016210764. Delivery is required within 27 days after the order, with a need ship date of October 6, 2026, and a final required delivery date of December 18, 2026. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements RP001. All shipments are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract also incorporates specific DLA master list technical and quality requirements and mandates the removal of government identification from any non-accepted supplies.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

SEAL ASSEMBLY, SHAFT, SPRING LOADED

Solicitation # SPE7MX-26-R-X077

The Defense Logistics Agency Land and Maritime is preparing to issue Solicitation SPE7MX26RX077 for a Long-Term Contract under FAR Part 12 commercial item procedures, aimed at securing a critical seal assembly with NSN 4320-012698849. This acquisition will be conducted as a Full and Open Competition with a Total Small Business Set-Aside, and the resulting contract will be a Firm-Fixed-Price Indefinite Delivery/Indefinite Quantity (IDIQ) with a five-year ordering period, including a three-year base and two one-year options. The Government intends to award based on Best Value, evaluating not only price but also past performance, delivery reliability, and other solicitation-specified criteria. The item is subject to the Trade Agreements Act, with eligibility limited to designated countries, and no Certificate of Conformance is required, though a Certificate of Quality Compliance applies. Delivery of all items must occur within 155 days after receipt of each individual delivery order, with shipments originating FOB at the supplier’s location and inspection occurring at origin. Technical specifications and drawings are accessible via the DLA Collaboration Folder upon solicitation release, and all proposals must be submitted through the DLA Internet Bid Board System (DIBBS), with electronic PDF submission via SF-1449 as an alternative. The solicitation is scheduled for release around July 29, 2026, with proposals due by August 28, 2026. The North American Industry Classification System code is 333912, with an estimated annual demand of 314 units, and the First Destination Transportation Program applies. Hard copies will not be provided, and the Government retains the right to cancel this acquisition without obligation.

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

Class Buy Oilers (T-AO 187) - CPP Valves

Solicitation # N3220526Q7220

The U.S. Navy's Military Sealift Command is seeking to procure three each of valves and manifold assemblies for the T-AO 187 class oilers to support the USNS HENRY J. KASER, USNS JOSHUA HUMPHREYS, and USNS LEROY GRUMMAN, with the original equipment manufacturer designated as Bird Johnson Propeller Company. This procurement is part of a class-wide buy intended to ensure consistent, reliable components across the fleet, leveraging existing design and manufacturing expertise to maintain operational readiness and minimize logistical complexity. The solicitation, identified as N3220526Q7220, was posted on August 6, 2026, and responses are due by August 21, 2026, at 6:00 PM Eastern Time. The effort is governed under NAICS code 332912, indicating it pertains to other fabricated metal product manufacturing, and is being managed by the Office of Military Sealift Command in Norfolk, Virginia. All correspondence and inquiries should be directed to Austin Amory, the primary point of contact, via the email address provided. The place of performance is Norfolk, Virginia, and the contract opportunity is open to eligible suppliers through the SAM.gov portal. There is no set-aside designation for small businesses or other socio-economic categories, meaning the procurement is open to all qualified vendors.

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-222N

This solicitation, issued by the Defense Logistics Agency (DLA) Dist San Joaquin, is for the procurement of two fluid valve stems under NSN 4810-01-396-5148. The contract requires delivery within 138 days after the order is placed and falls under NAICS code 332912. The response deadline for this solicitation is September 4, 2026. Compliance requirements are stringent, including CMMC Level 2 certification and adherence to DLA packaging and quality standards. The contract strictly prohibits the use of Class I ozone-depleting chemicals and mandates strict export control of technical data in accordance with ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.

POSTED

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7MC-26-T-223L

This contract is a solicitation for the procurement of two fluid pressure regulating valves, identified by NSN 4820-01-194-2017 and Trac Regulator Co. Inc. part number 40403-202. The valves must feature a bronze body with 2-1/2 inch flanged inlet and outlet connections and a nominal face-to-face distance of 11-3/4 inches. Classified as a critical application item, the hardware must comply with strict mercury-free requirements, except for specific functional exceptions defined by NAVSEA. The order is a total small business set-aside issued by the DLA Distribution San Joaquin. Delivery is required within 164 days, with a need ship date of February 16, 2027, and a final delivery date of April 16, 2027. Shipping is FOB Origin with inspection and acceptance occurring at the destination in Tracy, California. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements.

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-224E

This solicitation, issued by the DLA Dist San Joaquin for the Department of Defense, is for the procurement of nine actuator plungers under NSN 4810-01-441-9328. The contract requires delivery within 164 days after order and is categorized under NAICS code 332912. Performance is centered in Tracy, California, with a response deadline set for September 4, 2026. The agreement mandates strict adherence to DLA packaging requirements and cybersecurity standards, specifically requiring CMMC Level 2 self-assessment and third-party certification. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Additionally, the provider must comply with regulations regarding the removal of government identification from non-accepted supplies.

POSTED

DEADLINE

VALVE, REGULATING, FL

Solicitation # SPE7MC-26-T-220A

This contract is for the procurement of one fluid pressure regulating valve, identified by NSN 4820011527727 and Leslie Controls part number YB2310D222. The valve features a copper alloy body, a 3/4 inch size, and an operating range of 25.0 to 60.0 PSI. It is designated as a critical application item and must comply with specific technical and quality requirements, including the prohibition of intentionally added mercury or mercury-containing compounds. The delivery is set for FOB Origin with a lead time of 168 days, shipping to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Inspection and acceptance will take place at the destination, with a required delivery date of March 23, 2029.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-222V

This solicitation from the DLA Dist San Joaquin is for the procurement of 12 fluid valve stem disc assemblies, identified by NSN 4820-01-145-6708. Each assembly must include one disk, one nut, and one pin. The contract requires delivery within 134 days after order and is categorized under NAICS code 332912. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a Third-Party Assessment Organization. Additionally, the contract involves technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed Department of Defense export-control training to access the necessary data.

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-221Q

This solicitation from the Department of Defense, specifically the Red River Receiving Building, is for the procurement of 529 units of a green 383 poppet drain cock under NSN 4820-01-306-3275. The contract is set aside for Women-Owned Small Businesses and requires a delivery timeframe of 195 days after the order is placed. Strict compliance is required regarding cybersecurity and export controls. The provider must meet CMMC Level 2 certification through a C3PAO and adhere to ITAR and EAR regulations concerning the handling of technical data. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-219S

This contract is a solicitation for the procurement of three fluid valve stems, identified by NSN 4820014765619 and associated with Vacco Industries part numbers V2D11617-4MF and V3E10106. The agreement specifies a delivery timeframe of 21 days after order, with a required delivery date of December 11, 2026, and a need ship date of September 22, 2026. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the procurement is categorized under NAICS code 332912.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-221M

This contract is for the procurement of five fluid valve stems, identified by NSN 4820-01-464-1933 and Emerson Automation Solutions part number 035388005. The item is designated as a critical application item and must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The delivery timeline is set for 192 days after the order, with a required delivery date of April 28, 2026. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA. Inspection and acceptance will take place at the destination, and the shipping terms are established as FOB Origin.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-439P

This contract is for the procurement of 12 nickel copper alloy fluid valve stems, identified by NSN 4820-01-276-1471 and part number 061882. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 74 days after the order, with a required delivery date of June 26, 2026. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. This solicitation is designated as a total small business set-aside under NAICS code 332912.

ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The Department of National Defence is soliciting bids for twelve line items of nonmetallic hose assembly sets manufactured by DANFOSS POWER SOLUTIONS II, LLC, with part numbers CB145K0190-0360, CB146M0154-0224, CB146M0164-0224, CB146M0202-0215, CB146M0202-0255, and CB146M0217-0177, all under GSIN 4720 and NCAGE 01276. Total quantities range from two to eight units per line item, with deliveries split between CFB Halifax, Nova Scotia, and CFB Esquimalt, British Columbia, ensuring each location receives specific allocations for each part number. All items must be new production from the original manufacturer or its accredited agent, conforming to the latest technical specifications in effect at the bid closing date, and must maintain at least 75 percent of their authorized shelf life as defined in CFTO D-05-001-001/SF-000 upon delivery. Asbestos is strictly prohibited unless no feasible alternative exists, and any such use requires full documentation of part number and location. Packaging and marking requirements are stringent, adhering to Canadian Forces specifications D-LM-008-030/SF-001 for preparation and D-02-002-001/SG-001 for identification, including UCC/EAN-128 barcodes with Application Identity 241 or 7001 for PSCN or NSN, along with human-readable interpretations and cure, manufacture, and expiration dates clearly marked on each package. Bids must be submitted electronically via the CPC Connect service by June 10, 2026, and are structured into three mandatory sections: technical, financial, and certifications. The financial bid must contain pricing alone, with no prices allowed elsewhere. Proposals for equivalent or substitute products must include full specifications, descriptive literature, and compliance statements proving form, fit, function, quality, and interoperability with existing Canadian military systems. The solicitation is restricted to Canadian suppliers and suppliers from applicable trading partners under reciprocal procurement rules. Awards will be made on a lowest evaluated price basis per item, with the

General Info

DND seeks bids for twelve nonmetallic hose assemblies, delivery to CFB Halifax and Esquimalt.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting ManufacturingView NAICS

Place of Performance

*Nova Scotia *British Columbia, CAN

Set-Aside

NONE

Documents

(2)

RFP W8482-264902/A ENSEMBLE DE TUYAU, NON METALLIQUE

PDF•rfp

RFP W8482-264902/A Hose Assembly Set, Nonmetallic

PDF•rfp

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 10

Solicitation

Response DeadlineJun 10

Deadline has passed

Submission Closed

06/10/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

Contacts

Jean-Pierre NormandinPoint of Contact

contact@example.gov

Full Description

NOTICE OF PROPOSED PROCUREMENT The Department of National Defence has a requirement for the items detailed below. The delivery is requested at CFB Halifax, Nova Scotia and CFB Esquimalt, British Columbia. Line Item 1, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB145K0190-0360 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 8, Unit of Issue: EA, to be delivered to CFB Halifax, Nova Scotia. Line Item 2, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB145K0190-0360 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 7, Unit of Issue: EA, to be delivered to CFB Esquimalt, British Columbia. Line Item 3, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB146M0154-0224 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 4, Unit of Issue: EA, to be delivered to CFB Halifax, Nova Scotia. Line Item 4, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB146M0154-0224 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 8, Unit of Issue: EA, to be delivered to CFB Esquimalt, British Columbia. Line Item 5, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB146M0164-0224 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 8, Unit of Issue: EA, to be delivered to CFB Halifax, Nova Scotia. Line Item 6, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB146M0164-0224 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 8, Unit of Issue: EA, to be delivered to CFB Esquimalt, British Columbia. Line Item 7, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB146M0202-0215 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 2, Unit of Issue: EA, to be delivered to CFB Halifax, Nova Scotia. Line Item 8, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB146M0202-0215 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 2, Unit of Issue: EA, to be delivered to CFB Esquimalt, British Columbia. Line Item 9, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB146M0202-0255 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 2, Unit of Issue: EA, to be delivered to CFB Halifax, Nova Scotia Line Item 10, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB146M0202-0255 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 2, Unit of Issue: EA, to be delivered to CFB Esquimalt, British Columbia. Line Item 11, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB146M0217-0177 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 2, Unit of Issue: EA, to be delivered to CFB Halifax, Nova Scotia. Line Item 12, HOSE ASSEMBLY SET,NONMETALLIC Part Number: CB146M0217-0177 GSIN: 4720 NCAGE: 01276 Manufacturer: DANFOSS POWER SOLUTIONS II, LLC Quantity: 3, Unit of Issue: EA, to be delivered to CFB Esquimalt, British Columbia. Bidders proposing an Equivalent or Substitute Product must indicate the brand name and model and/or Part Number and the NSCN/NCAGE of the item of supply they are offering. Bids will be assessed on a Delivery Duty Paid (DDP) basis The Crown retains the rights to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.