This Solicitation opportunity from Department Of Defense was posted on August 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HOSE, NONMETALLIC

Closed

SPE7M4-26-T-329BFederal

Submission Closed08/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326220

New

DIBBS

Manufacturer of Nonmetallic Special Shaped Section Seal (NSN 5330-01-681-5487)This subcontract involves the manufacture and supply of one nonmetallic special shaped section seal for prime contractors supporting DLA Weapons Support Land Supplier Operations. The contractor is required to produce part number 12621762 in accordance with NSN 5330-01-681-5487 specifications, utilizing asbestos-free materials and adhering to the DLA Master List of Technical and Quality Requirements RA001. A critical delivery requirement is that the seal must have a remaining shelf life of 153 months upon receipt. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency, with the place of performance located at Fort Hood. The procurement falls under NAICS code 326220. Interested parties must note the response deadline of November 9, 2026, for this specific manufacturing requirement.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Nonmetallic Fire Fighting Hose Assembly SupplierThis subcontract, issued by the Department of Defense through the DDSP New Cumberland Facility, requires the manufacture and supply of 116 nonmetallic fire fighting hose assemblies for prime contractors fulfilling DLA supply contracts. The specific requirements call for Type B noncollapsible synthetic rubber hose assemblies measuring 1.5 inches in internal diameter and 50 feet in length, equipped with 1.5 inch NPSH thread brass couplings. All products must strictly adhere to MIL-SPEC standards for synthetic rubber noncollapsible fire fighting hoses and meet DLA quality conformance standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326220, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Specialized O-Rings (NSN 5331-01-669-5446)This subcontract involves the manufacture or procurement of specialized O-rings under NSN 5331-01-669-5446 to support prime contractors for the Department of Defense DLA Weapons Support Maritime Supply Chain. The contractor must ensure all materials are ozone-compliant and asbestos-free, with a requirement to deliver two O-rings to the Naval Facility in Everett, Washington. Full supply chain traceability is mandatory for these components. Strict adherence to military standards is required for the fulfillment of this order. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 to ensure adequate UV protection, while all marking must follow MIL-STD-129. The project falls under NAICS code 326220, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supplier of Elastic Cord Assemblies (NSN 4020-01-572-0958)This subcontract involves the manufacture or sourcing of 1,092 linear feet of elastic cord assemblies meeting NSN 4020-01-572-0958 specifications for prime contractors supporting DLA Troop Support. The selected supplier must ensure all products are marked and labeled according to MIL-STD 129 and strictly adhere to the DLA Master List of Technical and Quality Requirements RA001. Managed under the Department of Defense with performance located in New Cumberland, Pennsylvania, the contract requires the supplier to maintain an active SAM registration to facilitate access to the Wide Area Workflow system. Interested parties must submit their responses by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Plastic Spiral Wrap Tubing SupplierThis subcontract involves the manufacture or procurement of 551 feet of plastic spiral wrap tubing meeting NSN 9330-01-345-2863 for prime contractors supporting Department of Defense supply contracts. The materials must be packaged according to ASTM D3951 and RP001 standards and labeled in compliance with MIL-STD-129. Delivery is required FOB Origin to DLA Distribution San Joaquin in Tracy, California. The supplier must adhere to strict regulatory requirements, including DLA RA001 and DFARS 252.204-7012 cybersecurity reporting standards. This opportunity falls under NAICS code 326220 and is managed by the Defense Logistics Agency.

POSTED

DEADLINE

Supply of Air Duct Hose (NSN 4720-01-644-8426)This subcontract involves the supply of one 4.000-inch I.D. air duct hose for prime contractors supporting DLA supply contracts for the Naval Air Warfare Center Air Division. The equipment must strictly adhere to NSN 4720-01-644-8426 and DLA Master List technical specifications. All materials are required to be DFARS compliant and free of Class I ozone-depleting chemicals. The contractor is responsible for packing and marking the items in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001. Performance will take place in Patuxent River, with the final deliverable being the completed and accepted hose. This requirement is managed under the Department of Defense through the DLA Weapons Support Fluid Handling Division.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supplier of Lacing and Tying Tape (NSN 4020-01-474-2482)This subcontract involves the manufacture or distribution of lacing and tying tape to support prime contractors delivering on Department of Defense supply contracts. The specific requirement is for 73 units of NSN 4020-01-474-2482, with performance taking place at Hill AFB. All materials must adhere to technical specification CID A-A-52084B and the DLA Master List of Technical and Quality Requirements. Compliance standards are strict, requiring packaging per ASTM D3951 and RP001 and marking according to MIL-STD-129. To be eligible, suppliers must be listed on the Qualified Suppliers List for FSC 4020. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, under NAICS code 326220.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Nonmetallic Hose Assembly ManufacturerThis subcontract involves the manufacture and supply of 170 nonmetallic hose assemblies for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for fabricating the assemblies according to NSN 4720-01-673-8548 and the DLA Master List of Technical and Quality Requirements, ensuring all units are completed, marked, and delivered. Strict quality and security standards are required for this engagement, including SAE AS9003 or ISO 9001 quality systems and NIST SP 800-171/CMMC Level 2 compliance. Additionally, all products must be packaged in accordance with ASTM D3951 and MIL-STD-129. The place of performance is located at Tinker AFB, and the response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Nonmetallic Hose Assembly (NSN 4720-01-655-2140)This subcontract involves the manufacture or procurement of one nonmetallic hose assembly, part number 0625-09-0399-03, conforming to NSN 4720-01-655-2140 specifications for the DLA Weapons Support Fluid Handling Division. The project strictly prohibits the use of additive manufacturing and mercury compounds. All deliverables must adhere to the Buy American Act and the Berry Amendment, with packaging requirements meeting RP001, MIL-STD-129, and ASTM D3951 standards. The completed assembly is to be delivered FOB Origin to the USS Dwight D Eisenhower (CVN 69). This requirement falls under NAICS code 326220 and is managed by the Department of Defense. Interested parties must note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

O-Ring Supplier (NSN 5331-01-503-0435)This subcontract involves the manufacture or procurement of a high-precision O-ring for the Department of Defense, specifically supporting the DLA Weapons Support Land Supply Chain. The supplier must ensure the component complies with NSN 5331-01-503-0435 and adheres to all technical and quality standards outlined in the DLA Master List. Strict material requirements are in place, mandating that the product be free of mercury and fully compliant with the Buy American Act and the Berry Amendment. The project falls under NAICS code 326220 and requires the delivery of a single O-ring meeting specific elastomer or composite specifications. The performance location is designated as FPO 96662. Interested parties must respond by November 9, 2026, to meet the requirements of this defense supply chain procurement.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Non-Metallic Hose Assemblies (NSN 4720-01-541-8134)This subcontract involves the supply of three non-metallic hose assemblies, specifically NSN 4720-01-541-8134, for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The selected provider is responsible for either manufacturing or sourcing the assemblies, ensuring all items are marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E and RP001 DLA Packaging Requirements. The contract falls under NAICS code 326220 and requires strict adherence to DFARS 252.239-7098. Performance for this requirement is centered in New Cumberland, Pennsylvania. Interested parties must have submitted their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0381

Solicitation SPE8E8-27-T-0381 is a federal procurement for 625 units of desiccant cartridges, identified by NSN 4440015994929 and part number TA330-RC-2684 from AGM Container Controls Inc. The contract is issued by the Defense Logistics Agency (DLA) for delivery to the DDSP New Cumberland Facility in Pennsylvania. The required delivery date is February 17, 2027, with a need ship date of January 31, 2027, and a delivery window of 82 days after order. Terms are specified as FOB Origin, with both inspection and acceptance occurring at the destination. The procurement is a Service-Disabled Veteran-Owned Small Business Set-Aside and requires compliance with various technical and quality standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Palletization must adhere to DLA requirement RP001. The contract incorporates several FAR and DFARS clauses covering fixed-price changes, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. Invoicing is to be processed electronically via the Wide Area Workflow (WAWF) system. Offers involving additive manufacturing are ineligible for award unless specifically authorized.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 11 days

AI Contract Overview

This contract seeks nonmetallic hose meeting the military specification for rubber hoses designed for petroleum-based fuels and water services, with a 7-inch inside diameter and 35-foot length, intended for discharge-only use, smooth bore, and lightweight buoyant characteristics. Residual lengths are prohibited, and each unit must be labeled with shelf-life markings per MIL-STD-129, including both the cured date and expiration date. The item is classified as a Type I (Code W) with a non-extendable shelf life of 120 months, and its technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. The product is subject to strict material prohibitions: Class I ozone-depleting chemicals are entirely banned, overriding any conflicting specification language, and mercury or mercury-containing compounds are forbidden unless specifically exempted for functional components like batteries or sensors, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary. The contract mandates origin inspection and acceptance with a mandatory first article test requiring one unit to be tested by the contractor, who must notify the contracting officer and quality assurance representative at least 14 days before shipment for inspection. Contractual compliance includes adherence to MIL-STD-2073-1E packaging standards, special marking code 32-32 for shelf life, and palletization per DLA packaging guidelines, with all marking conforming to MIL-STD-129. The item is designated a critical application product, and the contractor must comply with extensive federal and defense regulations, including safeguarding covered defense information, restrictions on covered telecommunications equipment, prohibition of hexavalent chromium, and compliance with the Buy American Act and Berry Amendment. The solicitation is a total small business set-aside under NAICS code 326220, with offers required to be submitted via DIBBS by August 21, 2026, and must exclude any items produced using additive manufacturing. Payment is to be processed electronically through WAWF, and delivery is FOB origin with an 815-day delivery window, with the initial procurement quantity of 88 units, including one unit designated for FAT testing.

General Info

87 nonmetallic hoses, 7-inch diameter, 35-foot, MIL-DTL-22240G, 120-month shelf life, FOB origin, delivered to San Diego and New Cumberland by 2028–2029.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

326220 - Rubber and Plastics Hoses and Belting Manufacturing

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

SBA

Documents

RFQ SPE7M4-26-T-329B for Fluid Handling Division

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 10

Combined Synopsis

Response DeadlineAug 21

Deadline has passed

Submission Closed

08/21/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressUSA

Contacts

Ashley Carroll

contact@example.gov

+1 (555) 000-0000

Full Description

HOSE,NONMETALLIC
HOSE,NONMETALLIC
7 IN. ID, 35 FT. LENGTH
MIL SPEC TITLED "HOSE, RUBBER, PETROLEUM BASED FUELS AND WATER SERVICES,
DISCHARGE ONLY, SMOOTH BORE, LIGHTWEIGHT BUOYANT TYPE".
RESIDUAL LENGTHS ARE NOT ACCEPTABLE.
SHELF LIFE MARKINGS REQUIRED PER 5.2.1 OF MIL-STD-129: SHELF-LIFE
MARKINGS SHALL BE SHOWN AS PART OF THE ITEM IDENTIFICATION DATA ON UNIT
PACKS, INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND UNPACKED ITEMS.
SHELF-LIFE MARKINGS SHALL INCLUDE THE CURED DATE AND THE EXPIRATION
DATE.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
FULL AND OPEN COMPETITION APPLY
SPE7M4-26-T-329B
SECTION B
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS NSN REQUIRES GOVERNMENT SOURCE INSPECTION
WITH A FIRST ARTICLE TEST REQUIREMENT. THE
GOVERNMENT SOURCE INSPECTION REQUIREMENT IS
VALID ONLY WHEN AN AWARD IS MADE INVOKING THE
FIRST ARTICLE TEST REQUIREMENT. IF THE AWARD
DOES NOT INCLUDE THE FAT REQUIREMENT, INSPECTION
AT DESTINATION IS ACCEPTABLE.
Shelf-life Additional Requirements
RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-22240G NOT 1 REVISION NR G DTD 02/12/2024 PART PIECE NUMBER: M22240-70-A
TDP Rev A Gen 1 IAW REFERENCE QAP 16236 SQAP008177781 REVISION NR DTD 12/18/2008 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017237066 0001 EA 87.000
NSN/MATERIAL:4720008177781
DELIVERY (IN DAYS):0815
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
SPE7M4-26-T-329B
SECTION B
PR: 7017237066 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:DP OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:01/30/2029 Original Required Delivery Date:09/07/2028
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017237066 0002 EA 88.000
NSN/MATERIAL:4720008177781
DELIVERY (IN DAYS):0815
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
SPE7M4-26-T-329B
SECTION B
PR: 7017237066 PRLI: 0002 CONT’D
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:DP OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0 UNIT CONT:DP OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:07/17/2028 Original Required Delivery Date:09/07/2028
CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7M4-26-T-329B
SECTION B
PR: PRLI: CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0090
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE7M4-26-T-329B NSN/Part Number: 4720-00-817-7781 Quantity: 87 EA Purchase Request: 7017237066QTY: 175 Delivery: 815 days ADO