This Government Contract opportunity from Mississippi was posted on June 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Hose Reel and Fueling Nozzle Assembly

Closed

State & Local

Submission Closed06/28/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E8-27-T-0448

Solicitation SPE8E8-27-T-0448 is a request for quotations from DLA Troop Support, Construction and Equipment for the procurement of five space dehumidifiers, identified by NSN 4440123992587. The requirements specify parts from Hensoldt Sensors GmbH, specifically part numbers 54.1227.560.00 and 83154459, and compliance with TDP Rev A Gen 1. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of September 29, 2026, and an original required delivery date of October 22, 2026. Delivery is set for 87 days after receipt of order, with FOB terms specified as Origin. The contract mandates strict adherence to DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 requirements. Inspection and acceptance will occur at the destination. The procurement includes various FAR and DFARS clauses covering basic safeguarding of contractor information systems, combating trafficking in persons, and the Buy American Act. Invoicing and payment must be processed through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, and must be submitted to the issuing office in Philadelphia.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Custom R&D Industrial Furnace

Solicitation # 7-S176-Q-00012-00

Argonne National Laboratory (ANL) is soliciting a firm fixed price contract under solicitation 7-S176-Q-00012-00 for the design, fabrication, delivery, installation, and commissioning of a custom industrial R&D furnace. The furnace is intended for testing fuel-flexible burners using natural gas and hydrogen blends from 0 to 100 percent H2, supporting both direct and indirect-fired configurations. Key technical specifications include a maximum continuous firing rate of 5 MMBtu/hr, a maximum bulk temperature of 2400 degrees Fahrenheit, and the inclusion of 70 threaded instrumentation ports and high-temperature optical windows. The project is expected to take approximately six months, with a target completion date of June 2027 and a planned award date in January 2027. Award will be made based on the Lowest Price Technically Acceptable (LPTA) basis, with technical acceptability evaluated on a pass/fail basis. Offerors must provide a completed ANL-70 Request for Quotation, technical compliance responses, country of origin information per FAR 52.225-1, and signed ANL-70B representations and certifications. Performance involves fabrication at the supplier's facility and installation at ANL Building 362 in Lemont, Illinois. Acceptance is contingent upon successful commissioning with a natural gas fired burner for at least two hours, ensuring the exterior shell temperature does not exceed 176 degrees Fahrenheit. The contract includes various FAR and DEAR clauses regarding labor standards, small business utilization, and safety, and requires specific insurance certifications and a High Risk Job Safety Analysis Form ESH-209 before a Notice to Proceed is issued.

Argonne National Labor - DOE Contractor

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0432

Solicitation SPE8E8-27-T-0432, issued by the Defense Logistics Agency, is for the procurement of two desiccant dehumidifier units, identified by NSN 4440-01-663-2801 and part piece number 86753-020. The items must be manufactured in accordance with Technical Data Package Rev A Gen 1, specifically Basic Drawing NR 5B5M3 19E2500234 Revision B and Reference Drawing NR 5B5M3 19E2500234. Delivery is required within 20 days after receipt of order, with an original required delivery date of April 7, 2026. The shipping terms are FOB Origin, and the destination for both freight and parcel post is the NSWC Carderock Division in Bethesda, Maryland. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951, MIL-STD-129, and DLA packaging requirement RP001. Inspection and acceptance will occur at the destination. Payment must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. Offers produced using additive manufacturing are ineligible for award unless specifically authorized. The solicitation is open for responses until November 9, 2026, and incorporates a price evaluation preference for certified HUBZone small business concerns.

Defense Logistics Agency

POSTED

DEADLINE

DEHYDRATOR UNIT, NONREA

Solicitation # SPE8E8-27-T-0408

Solicitation SPE8E8-27-T-0408 is a request for quotations from DLA Troop Support, Construction and Equipment for the procurement of 43 nonreactivating dehydrator units, specifically Bendix Commercial Vehicle Systems LLC part number 5008574, identified by NSN 4440-01-679-6239. The contract requires delivery within 167 days after receipt of order, with a need ship date of April 26, 2027, and an original required delivery date of March 23, 2027. Shipping is established as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Both inspection and acceptance will occur at the destination. The procurement is governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. The contractor must utilize the Wide Area WorkFlow system for electronic invoicing and receiving reports. Key regulatory compliance includes the Buy American Act, DFARS safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Quotations must be submitted by November 9, 2026, and must include all required representations and certifications regarding business size and socioeconomic status.

POSTED

DEADLINE

Dehumidifier Large Buy

Solicitation # 4440-01-699-4396

DLA Troop Support Philadelphia has issued solicitation SPE8E8-26-Q-0367 for the procurement of electric desiccant dehumidifiers under NSN 4440-01-699-4396. The requirement is for a definite quantity of 71 units, with an additional option quantity of 71 units. The approved source for this equipment is Munters Corporation, part number 30116A. This is a firm fixed price contract processed under FAR part 12 for commercial products, with a solicitation closing date of November 30, 2026. The award will be based on a price only selection process, provided the offeror is determined to be responsible and compliant with all solicitation terms. Deliveries are set for December 17, 2026, with the FOB point at origin and the destination located in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors must submit proposals via email to Timothy Kitzinger and ensure they remain valid for 120 days following the closing date. Any offerors proposing alternate parts are required to provide a complete technical data package for evaluation.

POSTED

DEADLINE

Deep Pit Furnace ManufacturingThis subcontract involves the fabrication and assembly of one heavy-duty industrial deep pit furnace for prime contractors supporting the Army Contracting Command - Rock Island. The project requires the construction of a free-standing vertical cylinder exterior shell and frame featuring a work zone measuring 60 inches in diameter by 144 inches in depth. The unit must integrate heating elements capable of maintaining an operating range between 1500 and 1850 degrees Fahrenheit and must strictly adhere to NFPA 86 Class C standards. Managed by the Department of Defense under NAICS code 333994, this opportunity is designated as a total Small Business Set Aside. The work is to be performed in Rock Island, with a response deadline set for November 18, 2026.

POSTED

DEADLINE

Solicitation # W519TC-27-Q-A019

The Army Contracting Command - Rock Island is soliciting a single Firm Fixed Price purchase order for one Deep Pit Furnace under solicitation W519TC27QA019. This procurement is a total Small Business Set-Aside under NAICS code 333994. The required furnace must feature an operating range of 1500-1850 degrees Fahrenheit, a load capacity of up to 10,000 pounds, and temperature uniformity of plus or minus 25 degrees Fahrenheit or better. The equipment must comply with ASTM E230 and NFPA 86 standards, and the manufacturer must provide evidence of having supplied or offered this type of equipment for at least three years. Delivery is required by June 1, 2027, on an FOB Destination basis to Rock Island, Illinois. Award will be based on the Lowest Price Technically Acceptable procedure. To be deemed technically acceptable, offerors must provide a compliance statement marking every paragraph of the purchase description as COMPLY or NON-COMPLY and provide a valid firm fixed price. Final acceptance is contingent upon successful on-site testing per AMS 2750, including a Temperature Uniformity Survey and a System Accuracy Test, with signed formal reports required for final payment. The contractor is responsible for site preparation, equipment preservation, and IUID marking per MIL-STD-130. All payments will be processed electronically via Wide Area WorkFlow. A site visit is scheduled for November 10, 2026, and quotes are due by November 17, 2026.

POSTED

DEADLINE

Industrial Process Furnace and Equipment SupplyThis subcontract, managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, involves the supply of primary heat treating equipment for prime contractors working on US Air Force facility projects at Holloman AFB. The scope of work includes the manufacture and delivery of a comprehensive furnace line, specifically an Allcase Batch Integral Quench Furnace Model 36–72–36, a Uni-DRAW Temper Furnace, a Spray/Dunk Wash Unit, and a DEDP System 1 Charge Car. To ensure operational precision and quality, all equipment must adhere to AMS 2750 Pyrometry Standards for system accuracy tests and temperature uniformity. The contract falls under NAICS code 333994 and requires the delivery of the fully manufactured furnace line and all associated companion equipment to the designated performance site.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

DEADLINE

New Heat Treat Equipment

Solicitation # FA9101NHT

The Air Force Test Center’s Installation Contracting Division is conducting market research through a Sources Sought Notice to identify capable small and large businesses for the turnkey procurement, delivery, installation, and commissioning of a new Surface Combustion Allcase Batch Integral Quench Furnace Line. Located at Holloman Air Force Base in Building 1185, the project includes the installation of a Uni-DRAW Temper Furnace and a Spray/Dunk Wash Unit. The selected contractor will be responsible for all specialized engineering, rigging, and labor, ensuring the system is fully operational and compliant with NFPA 86, AMS 2750, OSHA 29 CFR 1910, and NEC/NFPA 70 standards. The performance timeline involves a 4 to 6 week kickoff and drawing phase, followed by a manufacturing lead time of approximately 52 to 78 weeks. On-site installation is expected to take 4 to 6 weeks, with an additional 2 to 3 weeks for commissioning and handover. Formal acceptance requires a successful three-cycle production demonstration and the sign-off of an Engineering Release Form. Additionally, the contractor must provide a two-year extended warranty and comprehensive on-site training for operators and maintenance personnel. Interested respondents must submit their company information, UEI number, technical solutions, budgetary estimates, and delivery timelines by November 2, 2026.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

DEADLINE

Modular Test Furnace with Auxiliary Exhaust Burner AssemblyThe Department of Energy's Office of Fossil Energy is forecasting a requirement for a Modular Test Furnace with Auxiliary Exhaust Burner Assembly. This project, categorized under NAICS code 333994, is intended to be set aside for small businesses and will be performed in Ohio. The procurement is managed by Small Business Program Manager Brian Halstead. Surface Combustion Inc is listed as the incumbent contractor for this effort.

Office of Fossil Energy

POSTED

DEADLINE

IRA Purchase of Carbolite-Gero (Verder Scientific, Inc.) Horizontal High Temperature Tube Furnace up to 1800 °C per the attached specifications: 1. Horizontal High Temperature Tube Furnace up to 1800…The Department of Energy's Office of Fossil Energy is forecasting the purchase of four Carbolite-Gero Horizontal High Temperature Tube Furnaces capable of reaching 1800 degrees Celsius from Verder Scientific, Inc. Each unit will include specific enhancements such as CC-T1 upgrades, heat shields with flange supports, custom Gero modifications, and 13-meter cables. The procurement also covers necessary CSA inspections for all four units and associated freight costs. This acquisition is designated under NAICS code 333994 and will be performed in Pennsylvania. Brian Halstead serves as the Small Business Program Manager for this requirement, which identifies Verder Scientific, Inc. as the incumbent contractor.

Office of Fossil Energy

POSTED

DEADLINE

44--DEHUMIDIFIER,DESICCANT

Solicitation # SPE8E827T0277

The Department of Defense, through DLA Troop Support, is soliciting quotes for the procurement of seven desiccant dehumidifiers under NSN 4440012732564. This requirement is designated as a total small business set aside under NAICS code 333994. The approved source for this equipment is 82974 91352-01, and the items must be delivered to DLA Distribution Jacksonville within 118 days after the order is placed. Interested parties must submit their quotes electronically by the deadline of November 2, 2026. This is a request for quote process where all responsible sources may participate, though no hard copies of the solicitation, specifications, or drawings are available. All inquiries and submissions should be directed to the primary point of contact at DibbsBSM.

DLA Troop Support

POSTED

10 days ago

DEADLINE

in 3 days

AI Contract Overview

This contract involves the supply and installation of an electric retractable hose reel system equipped with at least 40 feet of 1-inch aviation fueling hose, accompanied by an avgas-type refueling nozzle. The contract is designated as a subcontract, issued by Delta State University in Mississippi, with the procurement geared towards supporting aviation fuel handling and refueling operations. Bidders have until June 28, 2026, to respond to this solicitation, which was posted on June 11, 2026. The contract falls under the NAICS code 333994, related to fluid power valve and hose fitting manufacturing, indicating specialized equipment requirements. While specific location details and points of contact are not provided, the contract links to an official Mississippi government procurement portal for further information. This opportunity is aimed at vendors capable of delivering both hardware supply and professional installation services to ensure effective fueling infrastructure.

General Info

Supply and install electric retractable hose reel with 40ft aviation fueling hose for Delta State University.

Agency

Mississippi → DELTA STATE UNIVERSITY

NAICS

333994 - Industrial Process Furnace and Oven Manufacturing

Place of Performance

MS, USA

Set-Aside

NONE

Documents

This scope was carved out of 9220-26-R-IFBD-00004.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Solicitation for Fuel Truck

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 11

subcontract

Response DeadlineJun 28

Deadline has passed

Submission Closed

06/28/2026, 06:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyMississippi → DELTA STATE UNIVERSITY

ContactsNo contacts available

OfficeN/A

Organization / AgencyMississippi → DELTA STATE UNIVERSITY

Office AddressN/A

ContactsNo contact information available

Full Description

Supply and installation of an electric retractable hose reel with at least 40 feet of 1-inch aviation fueling hose and an avgas-type refueling nozzle.