Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on April 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hot Weather OCP Boots

Closed
W912R1-26-Q-8002Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 316210
New
DIBBS
INSOLES, FOOTWEAR
Solicitation # SPE2DS-27-T-0947
Solicitation SPE2DS-27-T-0947, issued by the DLA Troop Support Medical Supply Chain, seeks the procurement of 100 pairs of footwear insoles (NSN 8335-01-345-4471) designed to protect and cushion the plantar surface of the foot. These full-foot insoles must be 1/8 inch thick, constructed from PPT/Plastazote, and lined with blue nylon fabric. They are specified to fit women's sizes 10 to 11 and men's sizes 9 to 10.5. A critical technical requirement is that the items must not be produced using additive manufacturing processes. The contract specifies delivery to Fort Bragg, North Carolina, with a required delivery date of October 27, 2026, and a delivery window of 20 days after receipt of order. Inspection and acceptance will occur at the destination. Packaging must adhere to commercial standards and DLA requirements (RP001), while marking must comply with Medical Marking Standard No. 1. Bidders are required to specify the source and part number being supplied. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS clauses regarding cybersecurity and the prohibition of covered defense telecommunications equipment. Quotations are due by November 2, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days

General Info

NAICS

316210 - Footwear Manufacturing

Place of Performance

DC, 20373, USA

Set-Aside

NONE

Documents

2

Purchase Description Hot Weather Tactical Boots DCSAB Support

PDF, High priority: read this firstpurchase-description
High

Hot Weather Boots Size Roll-Up DCSAB

PDF, Low priorityother
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W7M1 Uspfo Activity Dc Arng
Contacts2 people available
OfficeJOINT BASE ANACOSTIA, DC, 20373-5115, USA
Office AddressJOINT BASE ANACOSTIA, DC, 20373-5115, USA
Contacts
MAJ Amanda Britton
SGT Terrance White

Full Description

Show more

REQUEST FOR INFORMATION


1.0 DESCRIPTION & PURPOSE


1.1 The DC National Guard (DCNG) is seeking information from interested vendors that can meet requirements for hot weather boots.


1.2 THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued solely for information and planning purposes – it does not constitute a Request for Proposal (RFP) / Request for Quote (RFQ) or a promise to issue an RFP / RFQ in the future. This RFI does not commit the Government to contract for any supply or service whatsoever. The DCNG is not at this time seeking proposals / quotes and will not accept unsolicited proposals. The Government will not pay for any information or administrative costs incurred in response to this RFI. All costs associated with responding to this RFI will be solely at the interested party’s expense. Not responding to this RFI does not preclude participation in any future RFP / RFQ, if any is issued.


1.3 Background: The DCNG has a need to procure hot weather boots to be worn by Soldiers in an urban environment. Due to the increased physical demands associated with prolonged outdoor operations during summer conditions, personnel require footwear designed to improve ventilation, reduce heat retention and moisture buildup, and support mobility during extended periods of walking, standing, and patrolling. Procurement of hot weather boots is necessary to promote Soldier health, comfort, readiness, and overall mission effectiveness. The boots shall be suitable for sustained use in high-temperature environments and capable of supporting daily patrol operations conducted in urban and outdoor settings. These boots shall be breathable and ventilated and waterproof. This requirement applies to personnel whose duties involve prolonged exposure to summer weather conditions, extended movement on foot, and continuous operational activity.


2.0 PRODUCT and DELIVERY


2.1 PRODUCT: The boots shall be new, unused, and free from defects. The hot weather boots will be coyote brown color and compliant with Army uniform standards set forth in Army Regulation (AR) 670-1 (https://armypubs.army.mil/ProductMaps/PubForm/Details.aspx?PUB_ID=1020639).


2.1.1 Salient Characteristics (IAW AR 670-1)


- Height: Approximately 8 inches


- Weight: Lightweight design (approximately 40 oz per pair or equivalent)


- Upper Material: Combination of leather and durable breathable fabric


- Waterproofing: Must provide waterproof or water-resistant barrier while maintaining breathability


- Liner: Moisture-wicking or waterproof liner


- Closure System: Lace-up system with secure fastening


- Midsole: Cushioned, shock-absorbing (e.g., EVA or equivalent)


- Outsole: Durable rubber with high-abrasion resistance and multidirectional traction


- Footbed: Cushioned insole


- Shank: Structural support (insole board or equivalent)


- Insulation: Non-insulated (hot weather configuration)


- Standards: Must be TAA compliant or from an approved country of origin


2.1.2 Packaging: Boots shall be delivered in standard commercial packaging.


2.2 DELIVERY


2.2.1 TIME: PRIORITY – As soon as possible


2.2.2 LOCATION: 189 Poremba Court, Building 350, Washington, DC 20373


3.0 INTERESTED VENDOR INFORMATION


3.1 ADMINISTRATIVE


Interested Vendors shall provide the following information:


3.1.1. COMPANY INFORMATION.


                Company Name


                Mailing Address


                Phone Number


                Website


                Point of Contact (POC)


                POC e-mail address


3.1.2. BUSINESS TYPE. Based upon North American Industry Classification System (NAICS) code 316210, vendor shall provide answers to the following questions:


Are you a Small Business in accordance with FAR Part 19?  


If so, which type:


Do you have a Commercial and Government Entity (CAGE) Code?


If so, what if your CAGE:


Do you hold a GSA Federal Supply Schedule (FSS) contract?


If so, provide contract number(s):


3.1.3 CAPABILITIES


                Can you provide boots IAW specifications at 2.1?


                Can you provide boots according to the attachment? 


What is your proposed boot brand and style?


Can you deliver the boots to Washington, DC 20373?


What is the lead time for delivery of the boots to this location?


4.0 RESPONSES


4.1 Reponses shall be emailed to contact@example.gov, contact@example.gov and contact@example.gov with the message subject line “Hot Weather Boot RFI Response”. E-mail with large attachments (over 15MB) may not be received.


5.0 QUESTIONS


Questions regarding this RFI should be submitted in writing by e-mail to contact@example.gov.


6.0 SUMMARY


This RFI is only intended for the Government to identify sources that can provide the needed services to fulfill the Government’s requirement. The information provided in this RFI is subject to change and is not binding to the Government. The Government has not made a commitment to procure any of the RFI requirements discussed, and release of this RFI should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. All submissions become Government property and will not be returned.

More opportunities from Department Of Defense → W7M1 Uspfo Activity Dc Arng

Same awarding agency

NAICS: 238210
Federal
Temporary Power Generation and Electrical IntegrationThe contract requires the provision and integration of temporary power generators to sustain HVAC operations, with a focus on electrical distribution and load management to ensure uninterrupted climate control functionality. The work involves deploying and connecting generator systems capable of handling the electrical demands of critical heating, ventilation, and air conditioning infrastructure, ensuring reliability during scheduled or emergency power outages. Technical coordination is essential to align generator capacity with existing electrical loads and to implement proper distribution mechanisms that prevent overloads and maintain operational stability. This subcontract is associated with the Department of Defense under the agency name W7M1 Uspfo Activity Dc Arng and is classified under NAICS code 238210, indicating it pertains to electrical contracting services. The place of performance is located in Washington D.C. with a ZIP code of 20003, suggesting the work will occur at a federal facility in the national capital region. The contract was posted on June 22, 2026, and is positioned as a subcontract, meaning the prime contractor will likely manage the overall scope while engaging specialized vendors for generator supply and integration. No set-aside type is specified, indicating the opportunity is open to all eligible contractors without preferential treatment based on business size or certification.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

4 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS