Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HOUSING, ACTUATOR

Active
SPE4A5-26-T-294VFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one Housing, Actuator, identified by NSN 1660-00-887-3315 and part number 714215-1, with a single unit requirement and a delivery timeline of 149 days to Tinker Air Force Base, Oklahoma. The item is to be delivered FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization governed by DLA Packaging Requirements, and all DLA Master List of Technical and Quality Requirements supersede any conflicting standards. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample lot and attributes assigned specific verification levels or AQLs based on criticality. Configuration changes require formal engineering change proposals, and any deviations or waivers must be formally requested. The supplier must perform a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and adhere to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Physical identification of the bare item is required, and government identification must be removed from non-accepted supplies. All technical and quality specifications referenced through R- or I-numbers are incorporated via the DLA Master List, with the revision in effect on the solicitation issue date controlling. The unit of issue is each (EA), and the need ship date is May 3, 2026, with an original required delivery date of January 8, 2027. The point of contact is Rasulbek Kilichev, and the solicitation number is SPE4A5-26-T-294V.

General Info

Procure one housing actuator, NSN 1660-00-887-3315, deliver FOB origin by January 8, 2027, per DLA and CMMC Level 2 requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-294V DLA Aviation Jul 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Rasulbek Kilichev
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOUSING,ACTUATOR
HOUSING, ACTUATOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
SPE4A5-26-T-294V
SECTION B
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SAMPLING:
HAMILTON SUNDSTRAND CORPORATION 73030 P/N 714215-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014383232 0001 EA 1.000
NSN/MATERIAL:1660008873315
DELIVERY (IN DAYS):0149
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
SPE4A5-26-T-294V
SECTION B
PR: 7014383232 PRLI: 0001 CONT’D
Need Ship Date:05/03/2026 Original Required Delivery Date:01/08/2027
SPE4A5-26-T-294V NSN/Part Number: 1660-00-887-3315 Quantity: 1 EA Purchase Request: 7014383232QTY: 1 Delivery: 149 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336411
New
Federal
"NSN 1615-01-502-6255, AXLE ASSEMBLY, WSDC: YLN, HELICOPTER, SEAHAWK, H-60.”The procurement is for 51 axle assemblies, NSN 1615-01-502-6255, part number 96250-32107-041, intended for use in the H-60 Seahawk helicopter, with a firm-fixed price contract structure and delivery required within 260 days from award to New Cumberland, PA. Only approved sources—Sikorsky Aircraft Corporation and Delta-Ray Industries Inc.—are currently authorized to supply this item, and any other manufacturer must submit a full source approval package to be considered. Technical data, specifications, or drawings are not available from the Government, and requests for such information will not be accepted. FOB Origin inspection and acceptance apply, and the item is classified as a Critical Safety Item, subject to the Supplier Performance Risk System. The acquisition is unrestricted, and all responsible sources may submit offers evaluated based on price, past performance, and other criteria outlined in the solicitation. The solicitation will be accessible via the DIBBS system and upon direct request to the buyer, with an anticipated posting date of August 5, 2026, and a response deadline of August 4, 2026. The contract is managed by DLA Aviation under the Department of Defense, with primary point of contact Samuel Kogi at the Richmond, VA office.
DLA Aviation

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336411
New
Federal
SPE4A726R0713 - 1660 - BRACKET ASSEMBLY, MICROPHONE, OXYGEN MASK / WSIC FThe contract is for a Bracket Assembly, Microphone, Oxygen Mask with NSN 1660-011138365 and WSIC F, procured by DLA Aviation under solicitation SPE4A726R0713. It will be awarded as an indefinite quantity contract with a five-year base period and no options, targeting an annual quantity of 5,404 units, with minimum and maximum delivery order quantities of 1,056 and 5,404 units respectively. First Article Testing is mandatory, and the delivery timeline includes 150 days to submit test samples, 150 days for government evaluation and notification, followed by 195 days for production delivery, totaling 495 days. Inspection and acceptance occur at origin, with FOB origin terms. This is a DLA direct procurement and is not designated as a critical safety item. The solicitation is issued as a 100% small business set-aside, and awards will be based on equal weighting of price, past performance, and delivery, with final decisions possibly incorporating SPRS and other evaluation factors as detailed in the solicitation. Offers must be submitted in writing. The solicitation will be publicly posted on the DLA Internet Bid Board System (DIBBS) on or around August 4, 2026, with no paper copies available. Interested parties must access the full solicitation in PDF format via DIBBS, requiring Adobe Acrobat Reader. The response deadline for submissions is September 3, 2026. The point of contact is Thuy Ho at Thuy.Ho@dla.mil, with the issuing office located in Richmond, Virginia. The NAICS code is 336411, reflecting classification under Aircraft and Parts Manufacturing, and the contracting activity falls under the Department of Defense’s DLA Aviation.
DLA Aviation

POSTED

about 10 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336411
New
Federal
SPE4A726R0710 – 1660 - HARNESS, CARRYING, OXYGEN / WSIC FThe contract solicitation SPE4A726R0710 is for the procurement of a carrying harness for oxygen equipment designated by NSN 1660-005712239 and WSIC F, issued as a 100 percent small business set-aside under the NAICS code 336411 by the Defense Logistics Agency Aviation. The resulting contract is an indefinite quantity contract with a base period of five years and no option periods, establishing an estimated annual requirement of 800 units with a minimum delivery order quantity of 114 units and a maximum of 800 units per order. Delivery for all orders is required within 400 days, with inspection and acceptance occurring at origin and FOB terms also designated at origin. Evaluation criteria for award are equally weighted among price, past performance, and delivery, with the final decision potentially incorporating SPRS data and other factors outlined in the solicitation. This is not a critical safety item and is a direct DLA procurement. The solicitation will be issued on or around August 4, 2026, and responses are due by September 3, 2026. All offers must be submitted in writing, and the full solicitation document will be accessible exclusively through the DLA Internet Bid Board System (DIBBS) at the specified URL. No paper copies will be provided, and users must have the latest version of Adobe Acrobat Reader to view the PDF documents. The contracting office is located in Richmond, Virginia, with Thuy Ho listed as the primary point of contact for inquiries. The place of performance is also in Richmond, Virginia, and the acquisition is part of the Department of Defense’s efforts to ensure consistent supply of non-critical aviation support equipment through small business partnerships.
DLA Aviation

POSTED

about 10 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336411
New
Federal
FSG53 HARDD SPE4A226R0002 0008The solicitation FSG53 HARDD SPE4A226R0002 0008, issued by the Department of Defense through DLA Aviation, has had its response deadline extended to August 25, 2026, at 1500 hours. Originally posted on July 20, 2026, the solicitation remains active under the NAICS code 336411 and is managed from the office located in Richmond, Virginia, with Christina Richardson listed as the primary point of contact. The place of performance is designated as Virginia, though no specific zip code is provided. The modification does not alter the nature of the solicitation or introduce any new set-aside classifications, and the updated deadline ensures interested parties have sufficient time to submit responses. All submissions must be received by the revised deadline to be considered.
DLA Aviation

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336411
New
DIBBS
Supply of NSN 1560LN0032333 (Aircraft Component or Material)The contract entails the procurement and delivery of two units of NSN 1560LN0032333, a defense-related aviation component or material intended for use at the Fleet Readiness Center DLA in Cherry Point, North Carolina. This is a subcontract under the Department of Defense, specifically managed by the DLA Fleet Readiness Center DLA PSC, and is classified under NAICS code 336411, which corresponds to aircraft manufacturing. The item is critical to maintaining operational readiness and supports military aviation systems at a key U.S. defense logistics hub. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, indicating a short turnaround window for qualified subcontractors to submit proposals. The place of performance is firmly designated as Cherry Point, NC, with a specific ZIP code of 28533-0021, and no other delivery locations are indicated. The contract does not specify a set-aside designation, meaning it is open to all eligible vendors without preferential treatment based on business size or category. Prospective bidders must navigate the DIBBS system via the provided link to access full details and submit responses in accordance with DLA procurement protocols.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
Manufacturing of Vane Assembly for Compressor (9th Stage)The contract involves the fabrication and delivery of two units of a vane assembly designated by NSN 2835005557731, intended for use in the ninth stage of compressor systems. The work must adhere strictly to applicable military specifications and DFARS requirements, ensuring full compliance with defense procurement standards. The vane assembly is critical to operational performance and must meet exacting engineering and quality benchmarks to support mission-critical applications within military aviation or defense systems. Issued as a subcontract under the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, the solicitation is active with a response deadline of July 27, 2026, and a posted date of July 19, 2026. The NAICS code 336411 indicates classification within aircraft and parts manufacturing, underscoring the aerospace nature of the component. The place of performance and agency address details are unspecified, suggesting flexibility in manufacturing location as long as deliverables meet compliance and timeline requirements. All proposals must be submitted through the official DIBBS platform prior to the deadline to be considered.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
Supply of QMB Aircraft MaterielThe contract calls for the procurement and delivery of 454 units of QMB, AIRCRAFT, MATERIEL compliant with military specifications, requiring full origin inspection and formal acceptance prior to delivery. All units must meet stringent quality and performance standards defined by defense requirements, with verification processes ensuring conformity throughout the manufacturing and shipment phases. The effort is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the Small Business Administration, and is classified under NAICS code 336411, which pertains to aircraft manufacturing. Performance of the contract is mandated to occur in New Cumberland, Pennsylvania, with the ZIP code 17070-5002 designated as the official location of execution. The opportunity was posted on July 19, 2026, with responses due no later than July 27, 2026, under the oversight of the ASC Commodities Division within the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
Aerospace Component Manufacturing (Critical Application Skin Panel)The contract calls for the manufacture of a single-unit, mission-critical aircraft skin panel designated P/N 65213-05003-118, requiring strict adherence to precise technical specifications and full compliance with DLA quality and traceability standards due to its critical application in defense aviation systems. The work must be executed to ensure structural integrity and operational reliability under demanding conditions, with all materials, processes, and documentation subject to rigorous DLA FLEET READINESS CENTER DLA PSC oversight and audit readiness. Production must align with the NAICS code 336411, reflecting aerospace component manufacturing, and deliverables must be traceable from raw material procurement through final inspection. The contract is classified as a subcontract under a Department of Defense procurement framework, with a response deadline of July 27, 2026, and a posted date of July 19, 2026. Performance is to be completed at or delivered to Cherry Point, North Carolina, with zip code 28533-0021, indicating the location of final assembly or integration into the larger aircraft system. While no specific set-aside classification or point of contact is provided, the submission must navigate the DIBBS portal via the designated link to ensure proper handling and compliance with federal acquisition protocols. The single-unit nature of the requirement underscores its bespoke, high-stakes role within a larger defense platform.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
Rotor Assembly Manufacturing or SupplyThe contract involves the supply of two Rotor Assemblies identified by National Stock Number 2920000806489, manufactured to meet strict military specifications for delivery under a Foreign Military Sales agreement with Turkey. The work is classified as a subcontract under NAICS code 336411, indicating its alignment with aircraft manufacturing and related components. The U.S. Department of Defense, through its LAND SUPPLY CHAIN office, is the overseeing agency, with performance expected to support operational readiness requirements for the receiving nation. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with all submissions required to conform to the technical and compliance standards mandated by military procurement protocols. Although specific details on delivery timelines, inspection criteria, or certification requirements are not outlined in the provided data, the nature of the contract necessitates full adherence to defense-grade quality assurance and interoperability standards. The transaction will be processed through the DLA DIBBS system, and all parties must ensure that export controls, end-use assurances, and international defense trade regulations are strictly followed throughout the supply chain.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
DIBBS
PAD, HELICOPTERThe contract is for the procurement of 504 units of PAD, HELICOPTER, with the NSN/Part Number 1615-01-303-1978, under solicitation SPE4A7-26-T-580D, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 169 days after award, with a response deadline of July 27, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, 17070-5002. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting any unauthorized disclosure or transfer of associated technical data to foreign persons or entities, regardless of location. Contractors must be approved by DLA, possess a valid US/Canada Joint Certification Program designation, and have completed required training on handling DOD export-controlled technical data. Packaging must comply with DLA standards, and inspection and acceptance are to occur at the manufacturer’s origin. Government identification must be removed from any non-accepted supplies, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The point of contact for inquiries is Jahaida Hall Hudson, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
SCREW, EXTERNALLY RELIEThe contract pertains to the procurement of 427 screws with an externally relieved body, identified by NSN 5305-01-483-6315, under solicitation SPE4A6-26-T-07MF, which is a total small business set-aside as defined by FAR 19.5. The solicitation was posted on July 19, 2026, with responses due by July 27, 2026, and delivery is required within 169 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting dissemination of associated technical data to unauthorized foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to this controlled data is limited to contractors who hold active JCP certification, have completed required DOD training on export-controlled data handling, and have received formal approval from DLA. Packaging must adhere to DLA specifications, and non-accepted supplies must have all government identification removed. The contracting agency is the ASC Commodities Division of the Department of Defense, with performance occurring in New Cumberland, Pennsylvania, and inquiries should be directed to Hannah Shimer at hannah.shimer@dla.mil.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
IDLER ASSEMBLY, TAILThe contract pertains to the procurement of three IDLER ASSEMBLIES, TAIL ROTOR, identified by NSN 1615012567533 and part number 214-010-719-105, under solicitation SPE4A5-26-T-294G, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 20 days of order issuance to DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey, with FOB origin terms, meaning title and risk transfer to the Government upon shipment from the supplier’s location. The total contract value is $3.00, with no variance allowed in quantity. Packaging must adhere to MIL-STD-2073-1E at Packaging Level B with Code Q, using preservation method 33 (clean and dry), and no preservation material or wrap. Marking must comply with MIL-STD-129, including GS1-128 and Data Matrix barcodes on containers, with no special marking required. Inspection and acceptance occur at the origin, governed by FAR 52.246-2, with sampling requiring zero non-conformances under MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, unless otherwise specified. Compliance with technical and quality requirements is mandated through the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with configuration change management governed by Engineering Change Proposal procedures. Physical identification of bare items must follow RQ017 standards. Cybersecurity requirements include CMMC Level 2 self-assessment and adherence to NIST SP 800-171 through DFARS 252.240-7997, along with safeguarding covered defense information per 252.204-7012. The contract includes clauses for combating trafficking, employment eligibility verification, sustainable products, hazardous material identification, and prohibitions on hexavalent chromium and Communist Chinese military company items. Payment must be submitted electronically via WAWF, and the contractor must maintain current SAM registration. Transportation by sea requires use of U.S.-flag vessels unless waived. All submissions are to be made electronically via DIBBS, and no Item Unique Identification is required as per DFARS 252
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 811211
New
DIBBS
Calibration and Test Equipment ServicesThe contract seeks ISOIEC 17025 accredited calibration services for test and measuring equipment, ensuring all calibrations are traceable to national standards and fully compliant with either MILSTD1916 or ASQ H1331 requirements. This subcontract is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and the work must adhere to rigorous quality and accuracy benchmarks to maintain the integrity of measurement systems used in defense operations. The solicitation was posted on July 20, 2026, with a response deadline of August 20, 2026, and is categorized under NAICS code 811211 for calibration and repair services for measuring and testing equipment. While no specific place of performance or point of contact is provided, the service must be delivered to meet the high standards expected by a federal defense contractor, with an emphasis on precision, documentation, and regulatory compliance.
Consumer Electronics Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
DIBBS
Technical Data and Configuration Management SupportThe contract focuses on providing technical data and configuration management support aligned with Defense Logistics Agency standards and formal approval protocols. It requires the management of technical data, configuration changes, waivers, and deviations through established compliance procedures to ensure accuracy, traceability, and adherence to military specifications. All activities must follow defined DLA processes to maintain system integrity and documentation integrity across the lifecycle of defense-related equipment and systems. This subcontract, classified under NAICS code 541330, is issued by the ASC Supplier Operations OEM Division under the Department of Defense and is open for responses until August 20, 2026. The work is expected to support critical defense supply chain functions, with performance tied to the agency’s operational requirements. While specific location details are not provided, the nature of the work implies coordination across multiple defense platforms and logistics nodes. Interested parties must engage through the designated DIBBS portal to submit proposals in accordance with federal procurement guidelines.
Engineering Services

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC Assessment SupportThe contract seeks to secure specialized support for achieving and maintaining CMMC Level 2 certification, focusing on comprehensive cybersecurity readiness across Department of Defense supply chain operations. This includes conducting a detailed gap analysis to identify deficiencies against NIST SP 800-171 requirements, aligning existing security controls with federal standards, and developing or updating critical documentation such as System Security Plans and Plans of Action and Milestones. The work is intended to ensure compliance with the Cybersecurity Maturity Model Certification framework, which is mandatory for contractors handling controlled unclassified information within the defense industrial base. This subcontract opportunity was posted on July 20, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 541512 for computer systems design services. The requirement is issued through the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and while no specific location for performance is indicated, the work is expected to support defense contractors nationwide. The nature of the scope suggests the selected provider must possess deep knowledge of CMMC requirements, NIST frameworks, and the ability to work closely with organizations transitioning into or maintaining compliance under this evolving regulatory landscape.
Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
Counterfeit Electronic Parts Detection and Avoidance System ImplementationThe contract requires the implementation of a comprehensive counterfeit electronic parts detection and avoidance system aligned with DFARS 252.246-7007, ensuring strict adherence to国防部 standards for supply chain integrity. This includes establishing robust inspection protocols, rigorous testing methodologies, end-to-end traceability processes, and controlled supply chain practices to prevent the introduction of counterfeit components into defense-related systems. The solution must be fully integrated into existing procurement and manufacturing workflows to guarantee consistent compliance across all tiers of the supply chain. As a subcontract under the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, the work is governed by NAICS code 541380 and is subject to a tight turnaround, with responses due by August 20, 2026. The emphasis is on technical accuracy, documentation completeness, and verifiable processes that demonstrate proven capability to identify, isolate, and remediate counterfeit electronic parts. Performance must meet or exceed federal requirements for authenticity assurance, with all controls designed to be auditable and scalable for use across multiple programs and contractors supporting national defense priorities.
Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332996
New
DIBBS
Reconditioned Spur Gear Supply and CertificationThe contract entails the supply of 17 reconditioned spur gears certified to meet stringent military specifications, ensuring operational reliability and adherence to defense standards. Each gear must be accompanied by complete technical documentation, full traceability records, and verified revision control to guarantee consistency and authenticity throughout the supply chain. The items must be labeled with the correct CAGE Code and part number as required by federal procurement protocols. The work is classified as a subcontract under NAICS code 332996 and is being managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. All proposals must be submitted by the deadline of August 20, 2026, with compliance to all technical and administrative requirements being mandatory for consideration. The place of performance and point of contact details are not specified, but the procurement is accessible through the DIBBS portal for further submission guidelines.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
DIBBS
TRANSMITTER, LIQUIDThe contract is for the procurement of one liquid transmitter, identified by NSN 6680014150947 and part number XM-36460-59-1500-O-L, sourced from SETRA SYSTEMS, INC. Delivery is required within 20 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The item must be packaged per ASTM D3951, with additional compliance required to all applicable DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging and labeling must strictly follow MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging guidelines. Sampling for quality verification must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with corresponding AQLs of 0.1, 1.0, and 4.0. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated delivery point at Fort Stewart, Georgia. The unit of issue is each, with no variance allowed in quantity. The contract is issued under solicitation SPE4A5-26-T-296C, with a required delivery date of July 7, 2026, and all technical and quality provisions referenced via DLA’s online master list take precedence. Government use codes and shipping identifiers are specified for tracking and logistical purposes.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
LIGHT, LANDING, AIRCRThis contract pertains to the procurement of a commercial item identified as a Light Landing Aircraft component, with part number 50-0178-5 and NSN 6220013061640, for a quantity of 28 units. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and compliance with MIL-STD-2073-1E packaging standards is mandatory, including specific preservation methods, packaging materials, and marking per MIL-STD-129 with a special fragile designation. Unit identification is not required per customer request, and the item is classified as a critical application item, requiring full adherence to all performance and quality specifications. The supplier must meet CMMC Level 2 cybersecurity standards and provide documentation for source approval, with all inspections and acceptance occurring at the destination. Delivery is required FOB origin, with a strict delivery window of 546 days from contract award, and the shipment must be routed to DLA Distribution Depot Hill in Hill AFB, Utah, via the designated freight address. The contract enforces zero tolerance for non-conformances under sampling plans derived from MIL-STD-1916 or equivalent zero-based methods, with critical, major, and minor attributes assigned strict verification levels or AQLs. No variance in quantity is permitted, and all packaging must conform to DLA’s procurement packaging requirements, including palletization and unit container specifications. The purchase request number is 7016880861, and the point of contact for inquiries is Jessica Baake, with the solicitation issued on July 20, 2026, and responses due by July 28, 2026, under NAICS code 336320 for aerospace product and parts manufacturing.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
GEAR, SPURThe contract pertains to the procurement of 17 spur gears identified by NSN 3020-00-869-5437 under solicitation SPE4A5-26-R-0245, with a delivery deadline of 368 days after award. This is a Navy-identified critical safety item requiring strict adherence to MIL-STD-129 for marking, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers on each unit pack. Although item unique identification is not required per the service customer’s request, all supplies must comply with DLA packaging standards and the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. The manufacturer must hold SAE AS9100 certification, and all configuration changes, waivers, or deviations must be formally submitted and approved by the DSC contracting officer. The item has no shelf life limitation, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Measuring and test equipment used must be calibrated and documented, and government identification must be removed from non-accepted supplies per RQ011. All documentation related to source approval and quality assurance must be maintained per RC001 and RQ002.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334513
New
DIBBS
GAGE, COMPOUND PRESSThe contract is for the procurement of one commercial off-the-shelf pressure gauge, specifically an Ashcroft Inc model P/N AA442CB2LWXED, identified by NSN 6685-01-552-8667, with a requirement for delivery within 20 days from the contract award date. The item is subject to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, including special labeling for delicate instrumentation, and must be palletized in accordance with DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The sole point of delivery is Fort Eustis, Virginia, and the item must be shipped via the fastest traceable means, explicitly excluding parcel post. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I codes, and the revision in effect on the solicitation issue date controls compliance. This solicitation, numbered SPE4A5-26-T-296B, was issued under a federal procurement vehicle for the Department of Defense, managed by the ASC Supplier Oper OEM Division. The required delivery date is February 7, 2025, and the point of contact for inquiries is Takiya Dickson. The contract specifies that all goods must be shipped to the designated military logistics address, marked with the government-provided shipping and marking control codes, and flagged for internal tracking using the TCN W51AEG50310001. The item falls under NAICS code 334513, indicating classification in the instrument manufacturing sector, and is part of a larger program tracked under Project TP 2. The contract excludes set-asides and is open to all qualified suppliers complying with DLA’s procurement and compliance obligations, with no exceptions permitted for packaging, marking, or shipping methods.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
SCALE, WEIGHINGThe contract specifies the procurement of commercial off-the-shelf weighing scales identified by NSN 6670016245433 and part number 1776113, supplied by Apple Valley Scale Company and Dymo Corporation, with a total quantity of 372 units. Delivery is required FOB origin within 168 days of contract award, with an original required delivery date of September 5, 2026, and a needed ship date of January 13, 2027. The unit price is $372.00 per unit, totaling $138,384.00, with no variance permitted in quantity. Inspection and acceptance occur at the destination facility located at DLA Distribution Red River in Texarkana, Texas, and all items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and all labeling and marking must conform to specified government standards. Sampling and quality verification follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major. Acceptance requires zero non-conformances in the sample lot unless the contract states otherwise. The contract is a total small business set-aside under NAICS code 332216, issued as a solicitation with a response deadline of July 28, 2026. All technical and quality requirements referenced by R and I numbers are governed by the DLA Master List in effect on the solicitation issue date, and transportation logistics are subject to DLAD Proc Notes C19 and C20. The point of contact for the contract is Hien-Van Trinh, and the purchase request number is 7017536479.
Saw Blade and Handtool Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIALThis contract specifies the procurement of two pressure dial gauges under NSN 6685-01-703-1549, with delivery required within 165 days to the DLA Distribution San Joaquin receiving warehouse in Tracy, California. The items must be supplied by authorized manufacturers including Sauer Compressors USA and Ashcroft Inc., and each unit must comply with strict technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements identified by R or I numbers. All components are classified as critical application items and must be inspected and accepted at origin, with mandatory adherence to MIL-STD-1916 or ASQ H1331 sampling methods and zero non-conformances required unless otherwise stipulated. Verification levels for attributes are fixed at VII, IV, and II for critical, major, and minor characteristics with corresponding AQLs of 0.1, 1.0, and 4.0, and unspecified attributes default to major. Packaging must meet MIL-STD-2073-1E and MIL-STD-129 marking requirements with no special marking codes applied, and palletization must conform to DLA packaging regulations. Measuring and test equipment used in manufacturing and inspection must be properly calibrated and documented, and source approval documentation must be submitted in accordance with RC001. The contract imposes a strict zero variance in quantity and requires delivery FOB origin, with transportation governed by DLAD procedural notes C19 and C20. The original required ship date is January 10, 2027, and all supplies must be marked with the correct part numbers and revisions as specified.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIREThe contract specifies the procurement of one unit of rope, wire with NSN 4010-01-732-4216, valued at $815.00, under solicitation SPE4A5-26-T-295W, with delivery required within 20 days after award, by July 14, 2026, to be shipped FOB origin to the Explosive Ordnance Disposal Group 1 at 3500 Attu Rd, Building 104, San Diego, CA 92155-5584. All items must be packaged in accordance with ASTM D3951, but DLA Master List of Technical and Quality Requirements supersede any conflicting requirements, and packaging must be marked and labeled per MIL-STD-129 with unit of issue and quantity per unit pack clearly indicated. Palletization must conform to RP001 DLA Packaging Requirements for Procurement. Sampling for inspection must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with zero non-conformances required in the sample lot unless otherwise specified; attributes are to be classified as Critical, Major, or Minor with corresponding verification levels or AQLs, and manufacturers may choose attribute or variable inspection methods. Physical identification of bare items must comply with RQ017, and government identification must be removed from non-accepted supplies per RQ011. Inspection and acceptance occur at origin, and the contractor must maintain a quality assurance system compliant with SAE AS9003 or ISO 9001 tailored to AS9003. The item is designated as a critical application requiring CMMC Level 2 cybersecurity self-assessment, with safeguarding of covered defense information governed by 252.204-7008 and NIST SP 800-171 DOD assessment requirements. Transportation must be traceable, and parcel post is prohibited. Contractors must comply with hazardous material labeling under 29 CFR 1910.1200 and prohibition of hexavalent chromium per 252.223-7008, and adhere to employment equity, anti-trafficking, and eligibility verification clauses. Invoices must be submitted via WAWF. The contractor must represent its size and socioeconomic status, including UEI
Other Fabricated Wire Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details