Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HUB, WHEEL, VEHICULAR

Active
SPE7L7-26-T-4528Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a single vehicle hub and wheel assembly identified by NSN 2530-01-666-7753 and part number 3992AS350-3, with a requirement for delivery of one unit within five days of contract award. The item is classified as a critical application item with a Type I shelf life of 60 months, which is non-extendable, and must be marked accordingly per special marking code 32. Strict packaging standards mandated by MIL-STD-2073-1E and MIL-STD-129 apply, including specific preservation methods, unit and intermediate container codes, and palletization in compliance with DLA packaging requirements. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, with delivery FOB origin to the designated government facility at Naval Air Station Whidbey Island, Oak Harbor, WA. Zero tolerance for non-conformances is required during inspection, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, and all attributes must be verified at specified quality levels. The item must be free of intentional mercury or mercury compounds unless used in approved functional components like batteries or instruments, and any mercury-containing portable devices must include secondary containment as per NAVSEA guidance. Contract performance is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and all provisions for inspection, acceptance, and hazardous material handling are binding under applicable military and federal standards.

General Info

One hub and wheel assembly, NSN 2530-01-666-7753, delivered in five days, FOB origin, zero tolerance, no mercury, strict MIL-STD packaging.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336360 - Motor Vehicle Seating and Interior Trim ManufacturingView NAICS

Place of Performance

3480 N LANGELEY BLVD BLDG 369, OAK HARBOR, WA, 98278-5200, US

Set-Aside

NONE

Documents

(1)

SPE7L7-26-T-4528.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
Laura Burd
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HUB,WHEEL,VEHICULAR
HUB,WHEEL,VEHICULAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Shelf-Life Type I, 60 months RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
DEVAL LIFE CYCLE SUPPORT LLC 11201 P/N 3992AS350-3
SPE7L7-26-T-4528
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017688215 0001 EA 1.000
NSN/MATERIAL:2530016667753
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
N44329
FLTREADCEN NORTHWEST
NAVAL AIR STATION WHIDBEY ISLAND
3480 N LANGELEY BLVD BLDG 369
OAK HARBOR WA 98278-5200
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N44329
FLTREADCEN NORTHWEST
NAS WHIDBEY ISLAND COM 360 257 6480
3480 N LANGLEY BLVD BLDG 369
OAK HARBOR WA 98278-5200
US
SPE7L7-26-T-4528
SECTION B
PR: 7017688215 PRLI: 0001 CONT’D
M/F: (TCN) N443296208DQ21
RDD: 777
PROJ: BK0 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: A9B ADV: FC: JE
Need Ship Date:00/00/0000 Original Required Delivery Date:07/30/2026
SPE7L7-26-T-4528 NSN/Part Number: 2530-01-666-7753 Quantity: 1 EA Purchase Request: 7017688215QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336360
New
DIBBS
COVER, FITTED, VEHICU
Solicitation # SPE7L4-26-U-1049
The contract is for the procurement of 17 fitted vehicle covers with NSN 2540-01-507-7822 under solicitation SPE7L4-26-U-1049, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within 80 days FOB origin, with no tolerance for quantity variance and inspection and acceptance occurring at the destination. Packaging must comply fully with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Packaging must also meet RP001 DLA Packaging Requirements for Procurement and follow palletization standards, with hazardous material handled per FED-STD-313 and TQ requirement IP025 if applicable. The unit of issue is each, and each unit pack must reflect the specified QUP. The contract includes detailed compliance obligations tied to DLA’s official technical and quality mandates, accessible via their eProcurement portal, with the revision in effect controlling compliance. The point of contact is Heather Kessler, and responses were due by August 17, 2026, with a posted date of August 2, 2026.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
SEAT, VEHICULAR
Solicitation # SPE7L1-26-U-0539
The contract pertains to the procurement of 36 vehicular seats identified by NSN 2540-01-576-9579 and part number BOS 2339131-544 under solicitation SPE7L1-26-U-0539, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 80 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must adhere to MIL-STD-129 for labeling and marking. If the item is classified as hazardous under FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Palletization must follow RP001 DLA Packaging Requirements, and the unit of issue is each (EA) with a quantity per unit pack of one. The contract is a total small business set-aside under NAICS code 336360 and remains open for response until August 17, 2026, with a posted date of August 2, 2026. The primary point of contact is Dov Sneward at DLA’s Land Post Award office.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
INSULATION, VEHICULAR
Solicitation # SPE7L1-26-T-906E
The contract is for one unit of vehicular insulation with NSN 2540-01-592-5230, procured under solicitation SPE7L1-26-T-906E, issued by the Department of Defense’s Land Supply Chain. The item, supplied by Cummins Power Generation Inc. under part number 405-9549, must be delivered within ten days to Fort Riley, Kansas, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. If the material is non-hazardous under Fed-Std-313, it must be commercially packaged per ASTM D3951; if hazardous, it must follow TQ requirement IP025. All packaging must be marked and labeled in accordance with MIL-STD-129, and palletization must adhere to RP001 DLA Packaging Requirements. The delivery is addressed to U.S. Army unit W81WRD, with the required delivery date set for August 4, 2026. Transportation and shipment details are governed by DLAD Procurement Notes C19 and C20, and the unit of issue is each. For government use, the item is coded with DIC A01, distribution V, and advance notice FC Z9.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BRACKET, TOW HOOK
Solicitation # SPE7L4-26-T-5952
The contract pertains to the procurement of one Bracket, Tow Hook with NSN 2540-01-699-9375 and purchase request number 7017696424, under solicitation SPE7L4-26-T-5952. The item must adhere to strict technical and quality standards referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The part must be manufactured and packaged in accordance with TDP Revision A Gen 1 based on reference drawings 19207 12644209 and 19207 12644210, with the most recent revision dated June 30, 2024. Packaging must meet MIL-STD-2073-1E specifications, including preservation method 10, packaging material code 00, wrap material FA, and unit container D3, with marking required to comply with MIL-STD-129 and no special marking codes applied. Palletization must follow DLA Packaging Requirements for Procurement, and the item is to be delivered FOB origin to the specified receive warehouse in Tracy, California. Inspection and acceptance occur at destination with zero variance allowed in quantity. The required delivery date is March 4, 2027, with a lead time of 202 days. The contract is administered by the Department of Defense, LSO Combat Vehicles and Armament, with primary point of contact Anna-Rachelle Betts.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
EQUIPMENT KIT, VEHIC
Solicitation # SPE7L4-26-T-5947
The contract solicitation SPE7L4-26-T-5947 seeks the procurement of 10 Equipment Kits, VEHIC with NSN 2540-01-707-7193 under a Total Small Business Set-Aside, with a response deadline of August 13, 2026, and a delivery requirement of 144 days after order. All components must conform to source control drawings and be sourced exclusively from approved suppliers listed on those drawings. The equipment must comply with stringent technical and quality standards referenced from the DLA Master List, including requirements for configuration change management, qualified products and manufacturers lists, and physical marking of bare items. The kit must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. Cybersecurity compliance is mandatory, requiring CMMC Level 2 certification by a certified third-party assessment organization, and the handling of technical data is subject to export controls under ITAR or EAR, restricting access to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA training and documentation. Inspection and acceptance may occur at the manufacturer’s origin, and vendor item control drawings govern all aspects of design and fabrication. Technical data associated with the kit is export-controlled, and its dissemination to foreign persons—even within the U.S.—is prohibited without explicit authorization. The delivery location is New Cumberland, PA, and primary point of contact is Anna-Rachelle Betts of the Department of Defense’s LSO Combat Vehicles and Armament office.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
LADDER, VEHICLE BOARDIN
Solicitation # SPE7L4-26-T-5957
The contract is for the procurement of five vehicle boarding ladders, identified by NSN 2540-01-681-9819 and part number 57K9205, under solicitation SPE7L4-26-T-5957, issued by the Department of Defense through DLA. Delivery is due within 199 days from the contract date with a firm delivery target of March 1, 2027, and items must be shipped FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization following DLA packaging requirements. The unit of issue is each, priced at $5 per unit, totaling $25, and all items require no special marking. Technical and quality standards referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The destination for delivery and shipping is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation details are governed by DLA Procurement Notes C19 and C20. The contract’s point of contact is Anna-Rachelle Betts, reachable via email and phone, and the solicitation was posted August 2, 2026, with responses due by August 13, 2026.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
COVER, SEAT, VEHICULAR
Solicitation # SPE7L1-26-U-0531
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
HANDLE, SPECIAL
Solicitation # SPE7L4-26-T-5944
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BOW, VEHICULAR TOP
Solicitation # SPE7L4-26-T-5955
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
Commercial Turbocharger Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
Pneumatic Vehicular Tire SupplyThe contract entails the supply of five pneumatic vehicular tires designated by NSN 2610013368828, requiring full compliance with military specifications and approved packaging standards to ensure operational readiness and logistical compatibility. The tires are to be delivered to Fort Bragg, North Carolina, following strict procurement protocols governed by the Department of Defense through the Defense Logistics Agency. This subcontract falls under NAICS code 336360, indicating its classification within the automotive parts manufacturing sector, and is positioned as a direct fulfillment task without a formal set-aside designation. The contractual obligation is tied to a specific procurement record identified by the contract number SPE7LX26F86C0, with all units expected to meet rigorous military-grade performance, durability, and safety benchmarks for use in defense-related vehicular operations.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
Pneumatic Tire Supply (NSN 2610015408312)The contract involves the supply of four new pneumatic tires identified by NSN 2610015408312, manufactured to meet military specifications for use at Al Udeid Air Base in Qatar. These tires are intended for military vehicle applications and must comply with stringent performance and durability standards required by the Department of Defense. The contract is structured as a subcontract under the broader procurement efforts of the Defense Logistics Agency, with the North American Industry Classification System code 336360 indicating the industry classification for tire manufacturing. The contract was posted on August 1, 2026, and is associated with the award identifier SPE7LX26F86B1 and contract number SPE7LX19D0029, reflecting its integration into an existing defense logistics framework. Delivery is targeted specifically to the operational hub at Al Udeid Air Base, emphasizing the strategic importance of maintaining tire readiness for military operations in the region.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 331315
New
DIBBS
HOUSING, LATCH PAN A
Solicitation # SPE8E5-26-T-3746
The contract is for one unit of a Housing, Latch Pan Assembly identified by part number 5599908-19 and NSN 5411-01-375-3695, with a requirement for delivery within 20 days after award. The item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through an accredited third-party assessment organization, and packaging must adhere to DLA-specific guidelines. The supply is classified as covered defense information and is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. entities. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the technical data. The solicitation number is SPE8E5-26-T-3746, issued on August 2, 2026, with responses due by August 13, 2026, under NAICS code 331315, and performance is designated for FPO with ZIP 96667. The primary point of contact is Don Trachtman, reachable via email and phone provided, and the contract is managed by the Defense Logistics Agency under the Department of Defense.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
NOZZLE, FIRE EQUIPME
Solicitation # SPE8E6-26-T-3955
The contract pertains to the procurement of a single nozzle for fire equipment, identified by NSN 4210-01-658-7880 and part number 05000542, with a required delivery of five days from the date of award. The item is to be shipped FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master list of technical and quality requirements, prioritizing those referenced by R or I numbers over general standards like ASTM D3951. If the item is non-hazardous per Fed-Std-313, it must be commercially packaged in accordance with ASTM D3951 but fully aligned with DLA’s superior specifications, including labeling and marking per MIL-STD-129 and palletization per RP001. Hazardous materials must meet TQ requirement IP025. The unit of issue is each, and one unit is ordered under purchase request 7017689821. Delivery must be made via the fastest traceable means, explicitly prohibiting parcel post, and shipped to the designated DLA retail facility in Albany, Georgia. The original required delivery date is August 4, 2026, and the contract was solicited under SPE8E6-26-T-3955 with a response deadline of August 13, 2026. All technical and quality compliance is governed by the DLA Master List in effect at the time of award, and the contracting officer is John Lieb of the Defense Logistics Agency.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325520
New
DIBBS
PRIMER, SEALING COMP
Solicitation # SPE8ES-26-T-2485
The contract specifies the procurement of one unit of PRIMER, SEALING COMP with NSN 8030-01-672-0817 under solicitation SPE8ES-26-T-2485, issued by the Defense Logistics Agency. Delivery is required within 20 days to a designated military installation in Vallejo, California, with FOB destination terms and zero variance allowed in quantity. The item is classified as a TYPE I (CODE M) shelf-life item with a non-extendable 24-month shelf life, and all packaging, marking, and shipping must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Hazardous materials protocols must be followed per IP025, and shipment must be traceable, excluding parcel post. The item is subject to the Defense Federal Acquisition Regulation Supplement, including requirements for hazardous communication, government information handling, and technical quality standards referenced through R-numbers. Packaging and storage must maintain temperatures between -10°F and 110°F, with specific packaging methods and codes applied. The supplier must be the Industries for the Blind & Visually Impaired, identified by P/N 7XM97, and all documentation must reflect revision standards including MIL-STD-129R, MIL-STD-147F, and FED-STD-313F. The item is for government use only, with the designated point of contact and delivery instructions clearly outlined, including the freight address and mandatory marking code 32 for shelf-life compliance.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, DOME
Solicitation # SPE8E7-26-T-3451
The contract pertains to the procurement of 10 units of LIGHT,DOME with NSN 6220-01-706-9275 under solicitation SPE8E7-26-T-3451, issued by the Defense Logistics Agency. Delivery is required within 20 days of award, with FOB origin terms, and inspection and acceptance occur at the destination. The item must be packaged in full compliance with DLA packaging requirements, specifically RP001, and labeled per MIL-STD-129. If not classified as hazardous under FED-STD-313, it must be commercially packaged according to ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over any commercial standards. The packaging must adhere to specified Unit of Issue and Quantity per Unit Pack, with palletization following DLA guidelines. The delivery destination is FB5682 at Cargo Movement Element Building 1029 in Aviano, Italy, with transportation governed by DLAD procedural notes C19 and C20. The contract includes strict quantity variance limits of zero percent, meaning no over or under shipment is permitted. All documentation, including technical and quality requirements referenced by R or I numbers, is governed by the DLA Master List, with revision control tied to the solicitation issue date. The item is identified by multiple revision levels of technical data packages referencing drawing numbers 78286 and 78550-02801, and must be marked and traceable as specified. The point of contact is Kelly Mitchell, and the order is tied to project ACV TP 3 with government-only identifiers for tracking and disposition.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, NONRECHARGEABL
Solicitation # SPE7L7-26-T-4530
The contract specifies the procurement of a single non-rechargeable battery with NSN 6135-01-592-8698 and part number 11141-000100, supplied by Physio Control Corp, under solicitation SPE7L7-26-T-4530. The battery must meet a Type I shelf life of 60 months with no extension permitted, and it is subject to strict packaging, marking, and shipping requirements per MIL-STD-2073-1E and MIL-STD-129, including specialized packaging codes and hazardous material handling protocols. The item is classified as commercial off-the-shelf with adequate catalog data available, and mercury or mercury compounds are strictly prohibited except in functional components such as batteries, fluorescent lamps, or sensors as defined by NAVSEA, requiring secondary containment for mercury-containing portable devices. Sampling and quality verification are governed by MIL-STD-1916 or equivalent zero-based plans with acceptance criteria of zero non-conformances unless otherwise specified, and critical attributes are assigned verification levels or AQLs accordingly. Delivery is required FOB destination within five days of contract award, with inspection and acceptance also occurring at the destination. The sole delivery point is Fort Bragg, North Carolina, and shipments must be traceable via expedited means, excluding parcel post. All packaging and marking must align with DLA’s standardized requirements, and the contract enforces compliance with hazardous communication standards and the DLA Master List of Technical and Quality Requirements referenced via official online portals. The contract was posted on August 2, 2026, with a response deadline of August 13, 2026, and the original delivery date is July 24, 2026.
Battery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATING BLANKET, ELE
Solicitation # SPE8E8-26-T-4934
The contract is for one electric heating blanket with NSN 4520017068008 and part number TW 026 000, issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-4934. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and, more importantly, all DLA Master List of Technical and Quality Requirements, with labeling and marking per MIL-STD-129. Palletization must follow DLA packaging guidelines, and traceable freight shipping is mandatory—parcel post is prohibited. The delivery address is the 7th ESB at Camp Pendleton, CA, with a freight shipping point and a designated military freight control number. The original required delivery date is July 14, 2026, and the item is classified under NAICS code 333414 for heating equipment manufacturing. Government-specific identifiers are included for internal tracking, including IPD, DIC, and FC codes, and the contract references applicable technical standards and restricted information handling under RD003. All requirements supersede general commercial practices and must be strictly adhered to by the supplier.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 323111
New
DIBBS
MARKER, IDENTIFICATI
Solicitation # SPE8E6-26-T-3954
This contract issued by the Defense Logistics Agency under solicitation number SPE8E6-26-T-3954 specifies the procurement of two units of a marker identified by NSN 7690-01-675-6387 and part number DBC-K0P-STK-DNP, with a total price of $2.00 per unit. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and both inspection and acceptance occur at the delivery point. The item is classified as a Type I shelf-life item with a non-extendable 12-month expiration period, and special marking code 32 must be applied in compliance with MIL-STD-129. Packaging must adhere strictly to MIL-STD-2073-1E and DLA packaging requirements, while avoiding plastic materials for wrapping, cushioning, or dunnage wherever possible. The item must be palletized per RP001 specifications, and shipment must be made by the fastest traceable means; parcel post is prohibited. Delivery is directed to USS GUNSTON HALL LSD 44 at FPO AE 09573, with transportation logistics referencing DLAD procedural notes C19 and C20. The original required delivery date is July 29, 2026, and contract terms incorporate technical and quality standards referenced from the DLA Master List, including requirements for covered defense information and unit of issue compliance.
Commercial Printing (except Screen and Books)

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-T-4933
The contract specifies the procurement of a heating element identified by part number 100109774 and NSN 4520016854500, with a quantity of nine units to be delivered within five days of order placement. All items must be packaged and labeled in strict compliance with MIL-STD-129 and ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Packaging and palletization must adhere to DLA-specific procurement standards, and items must be shipped via the fastest traceable means, explicitly prohibiting parcel post. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The shipment is directed to Fort Eustis, Virginia, and must be marked with the specified military freight and manifest codes. The unit price is $9.00 per item, totaling $81.00, with no variance allowed in quantity. The contract is issued under solicitation SPE8E8-26-T-4933, with a required delivery date of July 29, 2026, and is governed by federal regulations under the Defense Logistics Agency, with technical and quality compliance monitored through referenced DLA master documents.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATI
Solicitation # SPE8E6-26-T-3948
This contract, issued under solicitation SPE8E6-26-T-3948 by the Defense Logistics Agency, pertains to the procurement of a Type I shelf-life item, P/N PSR-9-COMBUSTIBLE, with a 12-month non-extendable shelf life. The material must have at least 85% of its shelf life remaining upon delivery, with expiration and cure dates clearly marked in calendar quarter and year format in accordance with MIL-STD-129, and the expiration date must be exactly one year from the cure date. All packaging must comply with MIL-STD-2073-1E, and marking requirements must strictly follow MIL-STD-129, including the mandatory shelf-life labeling. Plastic materials are to be avoided for wrapping, cushioning, or dunnage whenever contractually permissible. The item is to be delivered FOB origin in a quantity of 4 purchase units within 20 days of contract award, with zero tolerance for variance in quantity. Inspection and acceptance occur at destination, and the delivery point is identified as W6FU SUP ACT MAINZ-WAC in Wackernheim, Germany. The contract incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation issue date. Transportation details are governed by DLAD procedural notes C19 and C20. The purchase unit is PG, and the total contract value is based on a unit price of $4.00, with a required delivery date of July 29, 2026. The item’s NSN is 7690-01-279-7614, and it is classified under NAICS code 323117, reflecting its origin as a defense-related labeling product supplied by American Labelmark Company.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATING BLANKET, ELE
Solicitation # SPE8E8-26-T-4935
The contract pertains to the procurement of one heating blanket, electric, identified by NSN 4520-01-706-8039 and part number TW 025 000, under solicitation SPE8E8-26-T-4935, issued by the Defense Logistics Agency on behalf of the Department of Defense. Delivery is required within 20 days of contract award, with FOB origin terms, and inspection and acceptance occurring at the destination point. The quantity is fixed at one unit with zero variance allowed. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. Palletization must comply with DLA packaging requirements. The blanket must be shipped via traceable freight to the designated military facility at Camp Pendleton, California, and parcel post is explicitly prohibited. The delivery address is identified with a military freight code, and the required delivery date is July 14, 2026. The contract is governed by federal acquisition regulations and incorporates specific technical and quality standards identified by R and I numbers from the DLA Master List, ensuring compliance with defense-specific performance and security criteria. Additionally, covered defense information requirements may apply, and the item is to be marked with the appropriate government usage codes.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326191
New
DIBBS
STRAINER, WASTE DRAI
Solicitation # SPE8E8-26-T-4939
The contract is for one unit of a Strainer, Waste Drain with NSN 4510-01-669-5545, issued under solicitation SPE8E8-26-T-4939 by the Defense Logistics Agency. Delivery is required within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance both occur at the delivery point. The item must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking codes, and palletization must comply with DLA packaging requirements. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Shipping must avoid parcel post and use the fastest traceable means, directed to USS CHOSIN CG 65, FPO AP 96662, with shipment details tied to RDD 777 and DLA procedural notes C19 and C20. The required delivery date is August 13, 2025, and the point of contact for inquiries is Alexis Selby at the Defense Logistics Agency.
Plastics Plumbing Fixture Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE7MC-26-T-163N
A butterfly valve meeting MIL-DTL-24624A Revision A, part number M24624, is being procured in five separate units under contract SPE7MC-26-T-163N, all sharing the same NSN 4820014220509. Each unit is ordered as a single piece with a unit price of $1.00, totaling $5.00 across all CLINs, with no variance allowed in quantity. Delivery is required within 20 days from the contract date, shipped FOB destination to the USS STETHEM DDG 63 at FPO AP 96678, with inspection and acceptance occurring upon arrival. All items must be prepared for delivery in strict compliance with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containment using designated materials and codes, with marking conforming to MIL-STD-129 and no special markings required. Palletization must adhere to DLA’s RP001 requirements, and shipping must utilize the fastest traceable means, explicitly prohibiting parcel post. All shipments are to be routed through the DLA vendor system using VSM, with a required delivery date of August 3, 2026, and transportation governed by DLA procedural notes C19 and C20. The procurement is managed by the Defense Logistics Agency under NAICS code 332911, with primary point of contact Paula McClary.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details