Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HULL REPAIRS ON NOAA SMALL BOATS IN NEWPORT, OR

Active
1305M226Q0231Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Hull repair services are being sought for two NOAA small boats, RA3 and RA4, at the Marine Operations Center-Pacific in Newport, Oregon, with all work required to be completed and both vessels returned to the facility no later than September 30, 2026. This solicitation is issued as a total small business set-aside under NAICS code 336611, with the small business size standard set at 1,300 employees, and is open only to qualified small businesses. Vendors must contact Dale Morrison or Peter Jennings to schedule a mandatory site visit at the Newport facility and must comply with all terms and conditions outlined in the full Combined Synopsis and Statement of Work, which includes technical specifications and contractual requirements. Quotes must include vendor contact information and a valid CAGE Code to be considered eligible for award. The solicitation is issued under RFO Part 12 as a combined synopsis and solicitation, with no additional written solicitations planned, and responses are due by August 14, 2026. Primary point of contact for the solicitation is Michelle Walton, and the award will be processed through the Department of Commerce, NOAA.

General Info

Hull repairs for NOAA boats RA3 and RA4 due by September 30, 2026, small business set-aside, quote due August 14, 2026.

Agency

Department Of Commerce NoaaView Agency

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

VA

Set-Aside

SBA

Documents

(7)

ABYC_STANDARDS_2026.pdf

PDF

Contractor Past Performance Reference Sheet

PDF•past-performance

HSL_Drawings_107050-XXX-X.pdf

PDF

Cummins_Marine_Engine_Manual.pdf

PDF

NOAA_SMALL_BOAT_S_PM_4_2_01052024.pdf

PDF

Sol_1305M226Q0231.pdf

PDF

OMAO_Supplement_to_NSBSPM_v3.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Commerce Noaa
Contacts1 person available
OfficeNORFOLK, VA, 23510, USA
Organization / Agency
Department Of Commerce Noaa
View Agency Profile
Office AddressNORFOLK, VA, 23510, USA
Contacts
WALTON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HULL REPAIRS ON NOAA SHIP RAINIER'S SMALL BOATS, RA3 AND RA4, IN NEWPORT, OREGON
REPAIR COMPLETION AND BOTH SMALL BOATS MUST BE BACK AT NOAA FACILITY IN NEWPORT, OREGON NO LATER THAN 09/30/2026

VENDORS MUST CONTACT DALE MORRISON AT 541-351-4634 OR EMAIL: DALE.D.MORRISON@NOAA.GOV AND PETER JENNINGS AT 228-355-3000 OR EMAIL: PETER.JENNINGS@NOAA.GOV TO MAKE SITE VISIT APPOINTMENTS.
SITE VISIT LOCATION: NOAA Marine Operations Center-Pacific, 2002 SE Marine Science Dr, Newport, OR 97365

This is a combined synopsis/solicitation for commercial items prepared in accordance with RFO Part 12. This announcement constitutes the only solicitation. Offers are being requested and no other written solicitation will be issued.

This solicitation is being issued as a total small business set-aside. The associated NAICS code is 336611. The small business size standard is 1,300 employees.

This combined solicitation/synopsis is for purchase of the following commercial services: Hull repair services on two small boats in Newport, Oregon

Description of requirements is as follows:
Please refer to the attached Statement of Work for full technical specifications/requirements.

See attached full Combined Synopsis with all terms and conditions which all vendors must be in compliance with to be eligible for award. At a minimum, all quotes should include contact information and CAGE Code.


Similar Contracts

Same NAICS industry code

NAICS: 336611
New
SLED
IFB160998 Powhatan 2026 Maintenance Package
Solicitation # IFB-125430
The Virginia Department of Transportation is soliciting bids for comprehensive maintenance services on the M/V POWHATAN, requiring full labor, rigging, materials, equipment, and crane services to perform cleaning, painting, and repairs. All work must be conducted at the designated plant site in Surry, Virginia, with the contractor responsible for providing every resource necessary to complete the scope of work to contractual standards. This includes ensuring all safety protocols, environmental compliance, and quality controls are met throughout the project duration. The solicitation, identified as IFB-125430 and titled IFB160998 Powhatan 2026 Maintenance Package, was posted on July 31, 2026, with a firm response deadline of August 25, 2026. The procurement is managed under the agency’s state and local government procurement framework, and inquiries should be directed to Kimberly Palmer, the designated point of contact, via email or phone. Bidders must submit their proposals through the official vendor portal, and selection will be based on compliance with technical specifications, capability to deliver within required timelines, and proven experience in maritime vessel maintenance.
Virginia Department of Transportation

POSTED

about 15 hours ago

DEADLINE

in 24 days
View Details
NAICS: 336611
New
Federal
VOYAGE REPAIR (VR)
Solicitation # N6817126QN067
The contract, titled VOYAGE REPAIR (VR) with solicitation number N6817126QN067, is a Firm Fixed Price non-commercial procurement issued by the NAVSUP Fleet Logistics Center Sigonella Naples Office for ship repair services to be performed aboard the USS ROSS (DDG 71) in Mombasa, Kenya. The work is scheduled from August 15 to 19, 2026, and includes critical maintenance tasks such as the inspection and correction of the Main Drainage Educator Fire-main Supply Valve Teleflex Cable and rigging and crane services, as detailed in Attachment J-2, the Composite Work Package. The contract employs a Lowest Priced Technically Acceptable (LPTA) evaluation method, where proposals must first pass a binary technical acceptability review based on compliance with minimum requirements before price is considered; the base line item (CLIN 0001) is listed at $0 while the optional work (CLIN 0002) is priced at $4,000, resulting in an estimated contract value range of $0 to $4,000. All work must adhere to NAVSEA SSRAC standards and specific technical specifications including S6435-QJ-MMI-010 Rev 8, S9167-AS-MMO-010 Rev A, and SSPC Painting Manual Volume 2, with coatings and welding inspected only by certified personnel meeting defined qualifications. The contract includes a comprehensive set of incorporated FAR and DFARS clauses governing payment, government property, changes, compliance with local labor laws, cybersecurity (DFARS 252.204-7012), and prohibitions on contracting with inverted domestic corporations and unauthorized telecommunications equipment, along with requirements for Workers’ Compensation under the Defense Base Act and overseas war-hazard insurance. Inspection and acceptance occur at the worksite in Mombasa with joint participation by the contractor and government representatives, and performance is subject to adherence to the Inspection and Test Plan (TIP) with designated inspection symbols. Invoicing is mandatory through Wide Area WorkFlow (WAWF), requiring contractor registration, with payment processed by NAVSUP FLC Naples using the DoDAAC N61240. Submissions must be physically delivered to FPO, AE by the deadline of July 30, 2026, at 15:00 CET, accompanied by completed Standard
Navsup Flc Sigonella Naples Office

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336611
New
Federal
USS RUSHMORE (LSD-47) VEHICLE LASHING SOCKET IN WELL DECK; REPLACE
Solicitation # N6264926R0045
This solicitation is restricted exclusively to contractors duly authorized to operate and do business in Japan in compliance with DFARS 252.225-7042, and is open only to holders of an active Master Ship Repair Agreement or Agreement for Boat Repair in the Japan region. The work involves repair and replacement tasks aboard the USS RUSHMORE (LSD-47) at Commander, Fleet Activities Sasebo, including replacement of the vehicle lashing socket in the well deck, repair of the drain well grating and synthetic deck panel, and replacement of the water barrier gasket. Performance must occur in Sasebo, Nagasaki, Japan, with a performance period running from October 12, 2026, to April 29, 2026, and a contract completion date of July 31, 2027. Proposals must be submitted by August 20, 2026, and only authorized MSRA/ABR holders in Japan may access the restricted attachments required for submission. Contractors outside Japan without unambiguous proof of compliance with the jurisdictional requirements will be deemed ineligible, and failure to commit to executing an MSRA or ABR in Japan prior to award will result in disqualification. All inquiries and access requests must be directed to the designated point of contact, Akiko Ota, and non-eligible sources will have their requests rejected.
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 20 hours ago

DEADLINE

in 19 days
View Details
NAICS: 336611
New
Federal
Hull Clean and Inspect Services
Solicitation # 52000RFQ260027274
The U.S. Coast Guard Surface Force Logistics Center is soliciting firm-fixed price quotes for hull cleaning and inspection services for CGC MOHAWK, with performance required in Key West, Florida, from August 17 to August 21, 2026. This procurement is a total small business set aside under NAICS code 336611 with a size standard of 1,300 employees, and only responsible small business concerns may submit proposals. Quotes must conform to the Statement of Work, include a detailed cost breakdown with unit and extended prices, payment terms, discounts for prompt payment, and the company’s UEI and CAGE code. Offerors must be registered in SAM.gov and submit proposals via email by 4:00 p.m. Eastern Time on August 5, 2026, to the designated point of contact with a carbon copy to the contracting officer. The government may award on an all-or-none basis to the vendor offering the best value, considering price and other factors, and will use simplified acquisition procedures under FAR Part 13. The solicitation incorporates multiple FAR clauses relating to commercial items, equal opportunity, labor standards, Buy American requirements, trafficking in persons, and electronic funds transfer, with full compliance required. All required representations and certifications must be completed electronically in SAM.gov prior to submission.
Sflc Procurement Branch 1(00080)

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336611
New
Federal
USS MTW FY27 MID-TERM AVAILABILITY (MTA)
Solicitation # N6817126RN006
The U.S. Navy is seeking contractors for the FY 2027 Mid-Term Availability (MTA) of the USS Mount Whitney (USS MTW), solicited under N6817126RN006 with a response deadline of August 3, 2026. The contract, issued by the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office, requires all work to be performed at a pier-side facility located within the Mediterranean basin or the European Atlantic coastline, encompassing the United Kingdom, Ireland, the Netherlands, Belgium, France, Spain, Portugal, and the Atlantic coast of Germany. The period of performance is strictly defined as January 12 through March 13, 2027, with the contractor responsible for securing continuous base and pier access throughout this timeframe. All personnel must be included in a Ships Access List submitted 96 hours prior to the start of the availability, and inspections and tests must be coordinated with the MSCREP and ABS Surveyor at least 24 hours in advance. The scope of work is defined by a comprehensive work package that includes labor, materials, and equipment to complete a range of maintenance, overhaul, and repair tasks. Key deliverables include operational testing and reporting of deck drains, calibration of gauges and instruments per ANSI and ISO standards, inspection and servicing of the Vessel Control System by authorized OEM representatives, repair of fire doors and shutters in compliance with NFPA, SOLAS, and ABS regulations, and full logistics documentation such as technical manuals, repair parts support, and residual asset files. All equipment must be marked with manufacturer plates, safe working load and vehicle weight labels, fuel type indicators, and certification plates from accredited laboratories such as UL or FM. Label plates must be constructed of stainless steel CRES 316/316L, and all hull and deck markings must be meticulously recorded prior to coating and fully restored to original specifications following surface renewal. The contract structure includes a base award of $50,500 for standard work items, contingent optional work items, a 20,000-hour Anticipated Growth Requirements (AGR) labor line, and daily rates for extended services. The total estimated contract value is $1,050,500. Contractor personnel must comply with strict safety requirements, including fall protection for any work at four feet or higher, adherence to lock-out/tag-out procedures per 29 CFR 1910.14
Navsup Flc Sigonella Naples Office

POSTED

about 20 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336611
New
Federal
BOOT SEGMENTS
Solicitation # SPMYM326Q3009
This solicitation, identified as SPMYM326Q3009, is a combined synopsis and solicitation issued under FAR Part 12 and Simplified Acquisition Procedures for commercial items, with no paper copies available and all responses required to be submitted electronically via email to Rachel McCluskey at Rachel.j.mccluskey.civ@us.navy.mil. The requirement is brand-name mandatory for Collins/EB, specifying two boot segment part numbers—19-87-2700D0720 and 19-87-2700D0710—each with defined dimensions and quantities, and only quotations matching these exact part numbers will be considered. Offerors must submit descriptive literature demonstrating compliance with specifications, and failure to do so will result in technical unacceptable status. Evaluation is based on Lowest Price Technically Acceptable, but award will prioritize the fastest delivery due to urgent needs, with material required ASAP. All respondents must be registered in SAM.gov, comply with FAR and DFARS clauses including 52.204-13, 52.212-4, and DFARS 252.204-7012, and complete provisions 252.204-7016 and 252.204-7019. Compliance with CMMC Level-1 requirements, Buy American provisions, and prohibitions on certain foreign-sourced materials including from Xinjiang is mandatory. Vendors must provide their CAGE code, business size under NAICS code 336611 (1300 employee threshold), country of origin for each item, and indicate preferred payment method (Net 30 via GCPC or WAWF, with no third-party payments accepted). Non-manufacturers must disclose the manufacturer’s name, location, and business size. All quotes must include FOB point, point of contact, and GSA contract number if applicable, and submissions are due by 3:00 PM Eastern Time on August 1, 2026.
DLA Maritime - Portsmouth

POSTED

about 20 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336611
New
Federal
Marine Boatyard Support and Industrial Support Lot II Follow-on MAC-IDIQ
Solicitation # N5523625R0012
The Southwest Regional Maintenance Center is soliciting proposals for Marine Boatyard Support and Industrial Support Lot II, a follow-on indefinite delivery/indefinite quantity contract with a five-year performance period consisting of five annual ordering periods. The contract supports the repair, modification, upgrade, service life extension, and periodic maintenance of U.S. Navy non-commissioned boats, crafts, lighterage, habitability barges, service crafts, and ancillary support equipment measuring 15 meters or 50 feet and above, up to 260 feet in length, as well as those under 15 meters that must be delivered via waterway. Work includes dry-docking, hull repairs, preservation, habitability upgrades, and repairs to mechanical, electrical, electronic, launch, retrieval, and transport systems. All services must be performed at contractor facilities within a 125-mile radius of Naval Base San Diego, California, using the latest NAVSEA Standard Items and approved specifications. The contract is a Total Small Business Set-Aside under NAICS code 336611, limiting eligibility to small businesses with 1,300 or fewer employees. Offerors must be registered in SAM and the PIEE Solicitation Module, and must possess a Navy-approved Quality System per NAVSEA Standard Item 009-04 at time of award. Award will be made on a best-value basis considering past performance, technical capability, and price, following FAR, DFARS, and NMCARS guidelines. The solicitation closes on July 30, 2026, and is managed by the Department of Defense office in San Diego, California.
Southwest Regional Maintenance Center

POSTED

about 20 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336611
New
Federal
USS HIGGINS 6C1 SRA BUNDLE 7
Solicitation # N6264926RA066
The USS HIGGINS (DDG-76) requires ship alteration services under solicitation N6264926RA066, with work to be performed at Commander, Fleet Activities Yokosuka Naval Base between October 5, 2026, and May 11, 2027. Offerors must submit proposals no later than August 6, 2026, at 10:00 AM JST, and only firms holding an active U.S. MSRA/ABR as a Prime Contractor are eligible, with strict compliance required for operations in Japan under DFARS 252.225-7042. Access to the detailed work specifications in ATTACHMENT (I) is exclusively through DoD SAFE, and potential bidders must request access by August 4, 2026, via email to miwa.takahashi2.ln@us.navy.mil, as the link provided will expire after 14 days. Proposals must declare any hazardous materials in accordance with FAR 52.223-3 and DFARS 252.223-7001, indicate if sea transportation is anticipated under DFARS 252.247-7023, and disclose any time limits on the offer. Any amendments to the solicitation must be acknowledged in the proposal comments, and additional clauses will be incorporated via formal amendment due to prior system constraints.
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336611
New
Federal
N5523626Q0101 - GRAVING DOCK NON SKID REPLACEMENT SERVICE
Solicitation # N5523626Q0101
This solicitation, N5523626Q0101, is a total small business set-aside under FAR Part 12 for the procurement of a graving dock non-skid replacement service to be performed at the Southwest Regional Maintenance Center in San Diego, California. The effort is classified under NAICS code 336611, Shipbuilding and Repairing, and is restricted exclusively to small businesses, with any submission from a large business deemed ineligible for award. The period of performance is strictly limited to between July 31, 2026, and September 30, 2026, and quotes must be submitted by the response deadline of July 21, 2026. The solicitation follows the commercial item acquisition procedures outlined in Subpart 12 and incorporates all provisions and clauses currently effective under Federal Acquisition Circular 2026-01 and DFARS Publication Notice 20260507. All communication and inquiries should be directed to the primary point of contact, Esther Cing, or the secondary contact, Jorge Morales, provided by the Navy organization. No contract value, pricing details, evaluation factors, delivery schedules, inspection criteria, packaging requirements, or specific statement of work details are available in the provided documentation. The absence of complete contract sections prevents full clarification of technical, administrative, or compliance requirements beyond the set-aside status, timeline, and location.
Southwest Regional Maintenance Center

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336611
New
Federal
HOT OIL FLUSH OF THE EXTERNAL HYDRAULICS SYSTEM
Solicitation # N32253-26-Q-0057
The Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility is conducting a sources sought notice under solicitation number N32253-26-Q-0057 to identify qualified small businesses capable of performing a hot oil flush of external hydraulic systems aboard a Los Angeles-class submarine. This effort is strictly for market research and is not a request for proposals or pricing; the government is not seeking offers at this time and assumes no financial responsibility for responses. The requirement is set aside 100% for small businesses under NAICS code 336611, with a size standard of 1,300 employees, and is classified under the Product Service Code J020 for ship and marine equipment maintenance and repair. The work will be performed at Joint Base Pearl Harbor-Hickam, Hawaii, with a tentative performance period of 27 November 2026 to 8 January 2027, and requires two 10-hour shifts per day, six days a week, excluding Sundays. Contractors must provide personnel who are U.S. citizens and capable of obtaining a Red Badge clearance through the Defense Biometric Identification System, with all individuals subject to extensive background submission including full name, Social Security number, date and place of birth, and citizenship. All personnel must complete mandatory training including RADCON, security, safety, and indoctrination briefings prior to work start. The Statement of Work specifies that the contractor must flush multiple hydraulic loops including the Secondary Propulsion Motor, Power Plant, Retractable Bow Planes, Thin Line Towed Array, Sail, and Vertical Launch System, each with defined minimum flow rates and pipe lengths. The contractor is required to implement a Quality Control Program on the first day of performance and submit it to the Technical Point-of-Contact prior to award, along with a Quality Management System compliant with Item 009-004. All work must comply with specified hydraulic oil standards and environmental regulations, and the contractor must indemnify the government against liability for any violations. Strict safety protocols mandate the use of hardhats, safety shoes, and eye protection, prohibit eating, smoking, or drinking outside designated areas, and completely ban photography or camera-equipped devices on the installation. Contractors must also submit a tailored capability statement with supporting documentation of equipment and staff qualifications, along with prior experience in similar submarine hydraulic flushing operations. Organizational details including CAGE code, DUNS number, size, ownership type, and SAM registration status must be provided. Participation is voluntary
Pearl Harbor Naval Shipyard IMF

POSTED

about 20 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336611
New
Federal
Carrier/Surface Ship Engineering Maintenance Assist Team (CEMAT/SEMAT)
Solicitation # N0002426R4114
The Naval Sea Systems Command is soliciting proposals under solicitation N0002426R4114 for the Surface/Carrier Engineering Maintenance Assist Team (S/CEMAT) contract, a five-year Cost Plus Fixed Fee, Level of Effort, Indefinite Delivery/Indefinite Quantity (IDIQ) vehicle to provide global engineering and technical support for the maintenance, overhaul, and repair of HM&E, aviation, and C4I systems aboard U.S. Navy aircraft carriers and surface ships. Performance will occur at multiple domestic and international locations, including Norfolk, Newport News, San Diego, Bremerton, Pearl Harbor, Yokosuka, Sasebo, and Everett, with work conducted onboard vessels and at naval shipyards. Proposals must be submitted exclusively through the PIEE portal by the deadline of August 10, 2026, and must adhere to a strict four-volume format, with Volume II limited to 95 pages and resumés capped at two pages per individual. The evaluation process prioritizes Management Approach, Technical Approach, and Resource Capabilities as significantly more important than Past Performance and Cost, with no numerical weights assigned, and the Government will conduct a trade-off analysis to select the proposal offering the best value, not necessarily the lowest price. The contract imposes stringent requirements related to organizational conflict of interest, level of effort, security, and compliance. Offerors are prohibited from supplying systems or services developed under this contract to the government for three years after completion unless exempted, and must promptly disclose any actual or potential conflicts. Labor efforts are measured at 40 hours per week, with uncompensated hours exceeding that threshold excluded from fulfillment. All personnel must hold appropriate security clearances, with full personnel listings—including SSN, citizenship, and clearance status—due seven days prior to work commencement. Work must comply with NAVSHIPS 9890/5 and 9890/8, NACE, NBPI, and other technical standards, while packaging and marking follow MIL-STD-129 and MIL-STD-130 guidelines for unique item identification and barcoding using UID. Invoicing is mandatorily conducted via Wide Area WorkFlow, and all submissions must be electronic, in editable formats, virus-free, and self-contained. The contract also requires mandatory flow-down of OCI clauses to subcontractors and strict adherence to government security policies, environmental controls, and hazardous material handling procedures. The NAICS code is 336
Navsea Hq

POSTED

about 20 hours ago

DEADLINE

in 17 days
View Details
NAICS: 336611
New
International
F3065-260165 - CCGS Des Groseilliers, Refit – Autumn 2026 - RFP
Solicitation # WS5788884067
Public Works and Government Services Canada is soliciting bids for the refit of the Canadian Coast Guard Ship Des Groseilliers, scheduled for autumn 2026 in Quebec City, Quebec. The solicitation, identified as F3065-260165 with reference number WS5788884067, was posted on July 31, 2026, and bids must be submitted by August 18, 2026. The work falls under NAICS code 336611, relating to ship building and repairing, and is open to all eligible bidders without set-aside restrictions. The contract is being managed on behalf of the Canadian Coast Guard with the primary point of contact being Simon Presse, Contracting Authority, reachable via email at simon.presse@tpsgc-pwgsc.gc.ca. All technical specifications, scope of work, and submission requirements are detailed in the official solicitation document available through the Canada Buys portal.
Department of Public Works and Government Services

POSTED

1 day ago

DEADLINE

in 17 days
View Details

More opportunities from Department Of Commerce Noaa

Same awarding agency

NAICS: 811310
New
Federal
NWS HVAC PREVENTIVE MAINTENANCE (PM) MULTIPLE LOCA
Solicitation # 1305M326Q0383
The solicitation seeks quotations for comprehensive HVAC preventive maintenance services across multiple National Weather Service locations in New Jersey, including Weather Forecast Offices, Maintenance Annexes, and NEXRAD sites in Mount Holly and Fort Dix. The contract is for non-personal services requiring all labor, equipment, and materials necessary to perform scheduled maintenance in accordance with the Statement of Work, which governs the base year and up to four option years. The government intends to award a single fixed-price purchase order on an all-or-none basis to the lowest-priced, technically acceptable offeror, with payment terms of Net 30. This is a commercial acquisition conducted under FAR Part 12, and no separate written solicitation will be issued; responses must be submitted by the deadline of August 10, 2026. All responsible sources may submit quotations, but contractors are solely responsible for confirming receipt of their submissions. Applicable Department of Labor wage rates are available via SAM.gov or the solicitation attachments, and entities should note that outdated SAM representations will not impact award decisions under the NOAA deviation in effect. The point of contact for inquiries is Jamie R. Rosales at NOAA's Seattle office.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 811212
New
Federal
One-Year Maintenance and Warranty ServicesThis contract covers comprehensive hardware and software maintenance, troubleshooting, repairs, and technical support for a period of one year following system delivery, ensuring continued operational reliability and performance. The scope includes all necessary services to address system failures, degrade performance, or other technical issues that arise after installation, with the goal of minimizing downtime and maintaining optimal functionality throughout the warranty period. The contract is classified as a subcontract under NAICS code 811212 and is issued by the Department of Commerce NOAA, with performance required in Silver Spring, Maryland, 20910. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, at 6:00 PM. No set-aside type has been designated, and while the point of contact is not specified, the official opportunity can be accessed through the provided SAM.gov link for further details.
Computer and Office Machine Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 611430
New
Federal
Technical Training and DocumentationThe contract calls for the development and delivery of specialized training programs and comprehensive technical documentation tailored to NOAA staff for the operation and maintenance of lidar systems. The work is scoped to ensure personnel are fully proficient in handling the technology, with emphasis on both theoretical understanding and hands-on practical skills. Training materials must be precise, up-to-date, and designed for effective knowledge transfer across varied skill levels within the organization. The contract is classified as a subcontract under NAICS code 611430, indicating it pertains to other technical and trade schools, and the performance location is designated as Silver Spring, Maryland, with a ZIP code of 20910. The opportunity was posted on July 30, 2026, and proposals are due by 6:00 PM Eastern Time on August 10, 2026. The contracting agency is the Department of Commerce, specifically through NOAA, and while no set-aside provisions are specified, the focus remains squarely on technical capability and delivery of high-quality educational resources to support critical operational needs.
Professional and Management Development Training

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
Federal
System Installation and Integration ServicesThe contract involves the integration of lidar hardware and software components to achieve full operational capability and seamless compatibility with NOAA’s existing systems, with work to be performed either on-site or remotely. This effort is critical to ensuring accurate data collection and system interoperability within NOAA’s operational environment, supporting mission-critical atmospheric and environmental monitoring functions. The performance location is specified as Silver Spring, Maryland, with a zip code of 20910, indicating that primary activities are centered in this region, though remote support is permitted. This is a subcontract under the NAICS code 541330, which pertains to computer systems design and related services, and it was posted on July 30, 2026, with a response deadline of August 10, 2026, at 6:00 PM. The contracting entity is the Department of Commerce, specifically through NOAA, and the opportunity is open to qualified subcontractors capable of delivering technically complex lidar integration solutions. There is no set-aside designation, meaning all eligible entities may compete, and the point of contact information is not provided in the available data. Interested parties must submit proposals prior to the deadline to be considered for award.
Engineering Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 511210
New
Federal
Lidar Software Integration and LicensingThe contract involves the provision, licensing, and integration of proprietary software designed for lidar operations, encompassing comprehensive data processing, visualization, and analysis tools. The software license is valid for one year and must be fully integrated into the recipient’s existing systems to support operational lidar data workflows. The work is scoped under a subcontract classification and is tied to the NAICS code 511210, indicating it relates to software publishing services. Performance of the contract is required to take place in Silver Spring, Maryland, with a zip code of 20910, and the solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026. The contracting agency is the National Oceanic and Atmospheric Administration under the Department of Commerce, with no specific set-aside type designated for this procurement.
Software Publishers

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333310
New
Federal
Long-Range Terrestrial Lidar System SupplyThe contract seeks the supply of two long-range terrestrial lidar systems designed for survey-grade three-dimensional data collection at distances of two kilometers or greater, specifically to support NOAA’s shoreline mapping initiatives. These systems must meet stringent accuracy and performance standards to capture high-resolution topographic data along coastlines, enabling precise monitoring of erosion, sea level rise, and other dynamic environmental changes. The technology must be robust enough for field deployment under varied environmental conditions and capable of producing georeferenced datasets compatible with existing NOAA survey workflows. The opportunity is structured as a subcontract under NAICS code 333310, which classifies it within the optical instrument and camera manufacturing sector, indicating a focus on precision hardware development. The solicitation was posted on July 30, 2026, with a firm deadline for responses on August 10, 2026, at 6:00 p.m. The place of performance is designated as Silver Spring, Maryland, with a zip code of 20910, where the delivered systems are expected to be integrated, tested, and potentially calibrated prior to field use. While no set-aside designation or point of contact is provided, interested parties must ensure full compliance with NOAA’s technical, logistical, and data delivery requirements to be considered for award.
Commercial and Service Industry Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 236220
New
Federal
Z--Constructions Services for Staging Space Renovatio
Solicitation # 1305M326Q0271
The contract for Lab Row Staging Space Renovations at the NOAA Western Regional Center in Seattle, WA, is a firm-fixed-price, small business set-aside solicitation under NAICS code 236220, issued as RFQ 1305M326Q0271 with a response deadline of August 5, 2026. The work encompasses commercial construction services for rooms 1074 through 1077, including demolition, architectural modifications, and installation of mechanical, electrical, plumbing, and fire protection systems, while excluding sprinklers, card readers, diffusers, fire alarms, and low-voltage work. Key scope items involve infilling wall cavities for a one-hour fire rating in corridors, relocating doors and welded frames, patching plaster, painting vertical surfaces with one prime and two finish coats, installing wood or metal blocking for casework, and upgrading flooring with epoxy resin limited to the staging space floor, with final color selection to be made from the contractor’s chosen manufacturer’s standard palette. Electrical circuitry from demolished offices will be repurposed to support six new outlets without requiring additional circuits, and existing double doors are confirmed not to be fire-rated. The contractor must comply with all construction wage rate requirements, Buy American provisions, and environmental controls, and is required to provide performance and payment bonds as mandated by FAR 52.228-15. All personnel performing work must be U.S. citizens or legal immigrants, subject to security screenings, badge issuance, and inspections of personal effects. The contractor must submit an Asbestos-Containing Materials Certification, maintain active SAM registration, and provide UEID and CAGE code with the quote. A detailed technical approach, experience with building restoration, past performance, and price will be evaluated for award, with non-price factors significantly more important than cost. The schedule requires a post-award preconstruction conference with the Project Manager, Superintendent, SSHO, and QCM, who are permitted to hold multiple roles simultaneously. Invoicing must occur monthly through the IPP system, with payment terms Net 30, and final inspection requires ten working days’ notice and sign-off from the Site QC Manager. Contract administration will be managed via FedConnect, and the period of performance is one year after receipt of the notice to proceed, with no option periods. All amendments, including revised drawings and answers to contractor inquiries, are incorporated into the RFQ and must be considered in the submission, with inconsistencies
Commercial and Institutional Building Construction

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
Federal
NOAA NOS NGS Terrestrial Lidar Scanners
Solicitation # 1305M226Q0195
The Department of Commerce, through NOAA’s National Ocean Service and National Geodetic Survey, is soliciting two long-range terrestrial lidar systems capable of acquiring survey-grade three-dimensional data at distances of up to two kilometers from limited or remote terrestrial locations. These systems must deliver high accuracy and sufficient point density to support nationwide emergency response, damage assessment, and precise geodetic applications required for the congressionally mandated national shoreline survey. The procurement includes not only the hardware but also associated software, comprehensive maintenance plans, ongoing training, and licensing agreements to ensure sustained operational capability and user proficiency across NOAA teams. Responses are due by August 10, 2026, with the solicitation posted on July 30, 2026 under number 1305M226Q0195. The NAICS code for this requirement is 333310, indicating it is classified under manufacturing of surveying and mapping instruments. The solicitation is unrestricted with no set-aside provisions, and performance will be centered in Silver Spring, Maryland, though equipment may be deployed nationwide. Primary point of contact is Kirstin Bryant, with secondary contact Nicole Lawson, both reachable via NOAA email. All inquiries and submissions must be made through the official SAM.gov portal linked in the posting.
Commercial and Service Industry Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 562910
New
Federal
Erosion and Sediment ControlThe contract pertains to erosion and sediment control measures necessary during construction activities to ensure compliance with environmental regulations. It requires the installation of silt fences, straw wattles, and inlet protection systems designed to prevent soil erosion and sediment runoff into nearby waterways. These measures are critical for maintaining water quality and meeting federal environmental standards throughout the project lifecycle. The work is classified under NAICS code 562910, which corresponds to remediation and other environmental services, indicating a focus on environmental protection and site restoration tasks. This is a subcontract awarded under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, ensuring opportunities for qualified small firms to participate in federal environmental infrastructure projects. The solicitation was posted on July 28, 2026, with a response deadline of August 14, 2026, at 3:00 p.m. The contracting agency is the Department of Commerce, specifically NOAA, though the precise location of performance is not specified, suggesting the work may occur at multiple sites under NOAA’s jurisdiction. The contract emphasizes environmental compliance, requiring strict adherence to best management practices for sediment control during construction phases.
Remediation Services

POSTED

4 days ago

DEADLINE

in 13 days
View Details
NAICS: 324121
New
Federal
Asphalt SupplyThe contract involves the supply of hot-mix asphalt produced at a certified plant that must meet strict performance-grade specifications to ensure durability and resistance to varying weather conditions. This is a subcontract classified as a Total Small Business Set-Aside under the SBA program, exclusively available to small businesses as defined by federal regulations, with the NAICS code 324121 indicating the industry standard for asphalt paving mixtures and blocks manufacturing. The opportunity was posted on July 28, 2026, with a response deadline of August 14, 2026, at 3:00 PM, giving interested parties a limited window to submit proposals. The contracting agency is the Department of Commerce, specifically NOAA, though no specific office address or place of performance details are provided, implying the location may be determined post-award or is broad in scope. The procurement is focused solely on material supply, with no mention of installation or construction services, and all asphalt must conform to predefined technical standards to ensure long-term performance under environmental stresses.
Asphalt Paving Mixture and Block Manufacturing

POSTED

4 days ago

DEADLINE

in 13 days
View Details
NAICS: 327320
New
Federal
Concrete Supply for Site RepairsThe contract titled Concrete Supply for Site Repairs is a subcontract set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside provision, with the NAICS code 327320 indicating it is for concrete product manufacturing. It involves supplying ready-mix concrete for targeted repairs to curbs, sidewalks, and drainage structures that occur during road resurfacing activities. The solicitation was posted on July 28, 2026, with responses due by August 14, 2026, at 3:00 PM. The contracting agency is the Department of Commerce, specifically NOAA, though no specific office address or place of performance details are provided. The work is expected to support infrastructure maintenance efforts tied to resurfacing projects, with the concrete supply required to meet the specifications necessary for durable, code-compliant repairs in these areas.
Ready-Mix Concrete Manufacturing

POSTED

4 days ago

DEADLINE

in 13 days
View Details
NAICS: 238990
New
Federal
Striping and Pavement MarkingThe contract titled Striping and Pavement Marking is a subcontract under a Total Small Business Set-Aside as defined by the SBA, designated for small businesses only, with a NAICS code of 238990 for other heavy and civil engineering construction services. It involves the installation of traffic striping, parking markings, arrows, and safety symbols on newly paved surfaces, requiring precision and adherence to industry standards for durability and visibility. The solicitation was posted on July 28, 2026, with proposals due by August 14, 2026, at 3:00 PM, and the work is to be performed for the Department of Commerce NOAA, though specific location details for performance or contact information are not provided. The contracting entity is the Department of Commerce, and interested parties must submit responses through the official SAM.gov portal before the deadline to be considered for award.
All Other Specialty Trade Contractors

POSTED

4 days ago

DEADLINE

in 13 days
View Details