Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

HVAC Component Supply (Condenser Units)

Active

State & Local

Response Deadline08/11/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of manufacturer-specified condenser units for air conditioning systems under a subcontract arrangement, with the procurement led by Dallas Area Rapid Transit in Texas. All supplied condenser units must meet exact manufacturer specifications and include proper packaging and labeling to ensure safe handling and traceability. Delivery must be completed to the designated destination, with the seller responsible for all logistics associated with transportation and compliance with required documentation standards. The solicitation was posted on August 6, 2026, with responses due by August 11, 2026, at 7:00 PM, indicating a tight window for submission. The North American Industry Classification System code 333415 confirms the scope aligns with HVAC equipment manufacturing, and while no set-aside designation is specified, the opportunity is open to qualified subcontractors capable of fulfilling the technical and logistical requirements. No additional details regarding point of contact, place of performance, or agency-specific delivery instructions are provided beyond the organizational affiliation with Dallas Area Rapid Transit.

General Info

Dallas Area Rapid Transit seeks manufacturer-specified condenser units for AC systems, delivery due by August 11, 2026.

Agency

Texas → Dallas Area Rapid TransitView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 07:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Dallas Area Rapid Transit

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas → Dallas Area Rapid Transit

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of manufacturer-specified condenser units for air conditioning systems, including packaging, labeling, and delivery to destination.

Similar Contracts

Same NAICS industry code

Ultra-Low Temperature Freezer – Marion VAMC

Solicitation # 36C25526MC0008

The Department of Veterans Affairs, through its VISN 15 Network Contracting Office 15, is conducting market research to identify qualified vendors capable of supplying an Ultra-Low Temperature Freezer for the Marion VA Medical Center in Marion, Illinois. This notice is purely informational and not a solicitation, meaning no binding obligation is created by responses, nor is a contract guaranteed. Interested companies must submit detailed information including their point of contact, SAM.gov UEI number, small business or socioeconomic status, the country of origin of the equipment, and proof of authorization as a distributor of the manufacturer’s product, along with marketing literature demonstrating compliance with the salient technical requirements outlined in the Statement of Work. All submissions must be sent by the deadline to the designated email address, and the government will not reimburse any costs associated with responding. The response feedback will inform future acquisition decisions, including potential set-aside requirements such as a Service-Disabled Veteran Owned Small Business set-aside, though a FULL and OPEN competition remains an option if responses are insufficient. The NAICS code for this requirement is 333415, and the office handling the procurement is located in Leavenworth, Kansas.

255-NETWORK Contract Office 15 (36C255)

POSTED

about 15 hours ago

DEADLINE

Evaporative Cooler requirement

Solicitation # W3915-27-0012

The Department of National Defence is seeking suppliers to provide five portable evaporative coolers capable of covering 6500 square feet and weighing no more than 290 pounds each. This procurement is conducted under solicitation number W3915-27-0012, with a response deadline of August 24, 2026, at 7:00 PM Eastern Time. The notice was originally posted on August 7, 2026, and has since been amended in response to supplier inquiries and to extend the submission window. Interested parties may request the formal amendment, including questions and answers, by emailing procurementCADTC@forces.gc.ca. The Crown reserves the right to negotiate terms with suppliers after submissions are received, and proposals may be submitted in either English or French. The equipment is intended for use in New Brunswick and Nova Scotia, with no security clearance required for participation. The contract is administered by Timothy Herrington, Contracting Authority, and falls under NAICS code 333415 for air conditioning equipment manufacturing.

Department of National Defence

POSTED

about 22 hours ago

DEADLINE

Supply of 27 1/5" Single-Door Reach-In Freezers

California Department of Rehabilitation

POSTED

DEADLINE

Supply of 54" Two-Section Reach-In Refrigerators

California Department of Rehabilitation

POSTED

DEADLINE

HVAC Component Supply (Evaporator Units)The contract titled HVAC Component Supply (Evaporator Units) seeks the procurement of evaporator units that strictly adhere to specified technical requirements and exact manufacturer part numbers, ensuring compatibility and performance integrity. All delivered units must be accompanied by comprehensive documentation to establish full traceability and compliance with applicable standards, supporting quality assurance and regulatory adherence throughout the supply chain. This subcontract, posted on August 6, 2026, requires responses by 7:00 PM on August 11, 2026, and is issued by Dallas Area Rapid Transit under NAICS code 333415, which classifies the manufacturing of commercial and industrial HVAC equipment. The place of performance and detailed organizational address parameters are unspecified, but the contracting entity is based in Texas, indicating delivery and service obligations are likely tied to regional transit infrastructure operations.

Dallas Area Rapid Transit

POSTED

DEADLINE

HVAC Chiller Unit Supply and Refrigerant ComplianceA new 80-ton Trane chiller unit with R-134A refrigerant or an approved equivalent must be supplied under this subcontract, with full manufacturer certification verifying refrigerant compliance and adherence to environmental handling standards. The contract is classified as a Small Business Set Aside under the SBA program with NAICS code 333415, designated for small business concerns, and is issued by the Department of Defense through the W7M9 Uspfo Activity Ksang 184. The place of performance is located in ZIP code 67221, and proposals must be submitted no later than August 31, 2026, at 2:00 PM EST, following the posting date of August 6, 2026. The procurement is exclusively available to small businesses and requires strict compliance with refrigerant specifications and environmental protocols.

W7M9 Uspfo Activity Ksang 184

POSTED

DEADLINE

water filters for Anniston

Solicitation # SP3300-26-Q-0234

The contract is for the provision of water filters for Anniston, Alabama, under solicitation number SP3300-26-Q-0234, issued by the Department of Defense through DLA Distribution. It is a combined solicitation with a Small Business Set Aside designation, meaning only small businesses are eligible to bid, and the North American Industry Classification System code is 333415, which pertains to water and water supply equipment manufacturing. The opportunity was posted on August 6, 2026, with a response deadline of August 12, 2026, at 5:00 PM Eastern Time. The performance location is in Anniston, AL, with the contract office located in New Cumberland, Pennsylvania. Primary point of contact for inquiries is Eric Hopkins, reachable via email at eric.hopkins@dla.mil or by phone at 717-770-3015. All proposals must be submitted through the SAM.gov portal using the provided link.

DLA Distribution

POSTED

DEADLINE

41--COOLER UNIT,AIR

Solicitation # SPE8E826T5100

The contract seeks the procurement of two cooler units, air type, identified by NSN 4130012251590, to be delivered to W1A8 DLA DISTRIBUTION within 139 days after award. The approved source for this item is 38450 FCU-H3-3.5KW-LVP, and only electronic quotes will be accepted; hard copies are not available. The solicitation, issued under number SPE8E826T5100, is a combined RFQ with no set-aside classification, open to all responsible sources that submit timely responses. Technical specifications, plans, or drawings are not provided, and bidders must rely on the information in the solicitation document accessible exclusively through the online portal. The solicitation was posted on August 6, 2026, with a response deadline of August 17, 2026, and is managed by DLA Troop Support under the NAICS code 333415. All inquiries must be directed via email to the designated point of contact listed in the solicitation, and further details can be found on the DIBBS website by entering the solicitation number in the global search.

DLA Troop Support

POSTED

DEADLINE

41--COOLING COIL,CONTINUOU

Solicitation # SPE8E826T5108

The U.S. Department of Defense, through DLA Troop Support, is seeking quotes for nine units of a continuous cooling coil with NSN 4130002730814 and one additional unit, both to be delivered to DLA Distribution at location W1A8. The nine-unit requirement has a delivery deadline of 299 days after order award, while the single unit must be delivered within 90 days. All responsible vendors are invited to submit electronic quotes by the response deadline of August 17, 2026, with no set-aside restrictions applied. The procurement is classified under NAICS code 333415, relating to heating equipment manufacturing, and is being managed from the agency’s office in Philadelphia, Pennsylvania. Questions must be directed to the designated point of contact via email, with additional solicitation details available through the official DIBBS portal using the solicitation number SPE8E826T5108.

DLA Troop Support

POSTED

DEADLINE

41--CONDENSING UNIT,REFRIG

Solicitation # SPE8E826T5104

The contract is for the procurement of nine condensing units, refrigerant type, with NSN 4130014428484, and an additional twelve units under a separate line item, both to be delivered to W1A8 DLA DISTRIBUTION within 54 days of award. The only approved source for this item is 66682 RUT510-3, and all quotes must be submitted electronically through the official solicitation portal; hard copies are not available and no specifications, plans, or drawings are provided. The solicitation, identified as SPE8E826T5104, was posted on August 6, 2026, with a response deadline of August 17, 2026, and is classified as a combined solicitation set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14. The procurement is managed by the Department of Defense through DLA Troop Support, with the contracting office located in Philadelphia, Pennsylvania, and all inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.

DLA Troop Support

POSTED

DEADLINE

41--COOLER UNIT,AIR

Solicitation # SPE8E826T5107

The contract solicitation aims to procure five air cooler units with NSN 4130014091423, to be delivered to DLA Distribution Puget Sound within 303 days of award. The only approved source for this item is listed as 38450 DDG SZ 23 TY III FCA, and quotes must be submitted electronically through the online solicitation portal; hard copies are not available. No specifications, plans, or drawings are provided to offer additional detail about the unit’s requirements. The solicitation, numbered SPE8E826T5107, was posted on August 6, 2026, with a deadline for responses set for August 17, 2026, and is open to all responsible sources who can meet the delivery terms. It is classified as a combined solicitation under NAICS code 333415 and administered by DLA Troop Support out of Philadelphia, Pennsylvania. Questions regarding the solicitation must be directed via email to the designated point of contact, with further details accessible through the SAM.gov workspace link or the DIBBS portal by entering the solicitation number.

DLA Troop Support

POSTED

DEADLINE

41--DUCT ADAPTER KIT,AIR C

Solicitation # SPE8E826T5101

The U.S. Department of Defense, through DLA Troop Support, is soliciting quotes for 26 units of NSN 4130014347665, a DUCT ADAPTER KIT,AIR C, to be delivered to W1A8 DLA DIST SAN JOAQUIN within 35 days of award. This procurement is conducted via a Request for Quote (RFQ) under solicitation number SPE8E826T5101, with all responses required to be submitted electronically and no hard copies available. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), as defined under FAR 19.14, and is categorized under NAICS code 333415 for Air Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing. The quote submission deadline is August 17, 2026, and interested parties must access the full solicitation details through the provided online portal; digitized technical drawings and military specifications are available for electronic retrieval or order. All responsible sources meeting the SDVOSB criteria are eligible to respond, and inquiries should be directed to the designated point of contact via email. The contract is managed out of Philadelphia, Pennsylvania, with no designated place of performance specified beyond the delivery location.

DLA Troop Support

POSTED

DEADLINE

More opportunities from Texas → Dallas Area Rapid Transit

Same awarding agency

Small and Minority/Women-Owned Business Outreach

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Logistics and Delivery Services

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Quality Assurance and Testing Services

Engineering Services

POSTED

DEADLINE

Electrical System Integration and Installation Support

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

High-Amperage Electrical Equipment Supply

Motor and Generator Manufacturing

POSTED

DEADLINE

Supply of VCU-DI Module (SM 321, 16 Channel)

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

NEW, CONDENSER BLOWER, FAN | 2100475

Solicitation # 2100475

All bids for the condenser blower fan, item number 2100475, must strictly adhere to Dallas Area Rapid Transit Authority's purchase order terms and conditions, which govern the entire procurement process. Bids must reflect FOB Destination shipping terms with freight costs included in the total price; FOB Origin or Prepay and Add terms will not be accepted. Delivery is time-critical, and failure to meet specified delivery schedules will result in immediate rejection and potential termination for default. Payment is net 30 days from receipt of the invoice or the order, whichever is later, and invoices must be submitted in triplicate to APInvoices@dart.org, clearly indicating the purchase order number, item details, quantities, pricing, and extended totals. The authority reserves the right to terminate the contract in whole or in part if the seller fails to perform as required within the agreed timeframes, and in such cases, the seller may be held liable for reprocurement costs unless the failure was beyond their control, in which case the termination may be reclassified as for convenience. All vendor submissions must be prepared and submitted through the Bonfire platform, with access granted only after initiating the "Prepare Your Submission" process and using the in-browser BidTable window to complete vendor responses. The solicitation closes on August 13, 2026, at 7:00 PM CT.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

BREAKER,DC FEEDER , 3000 AMP, | 2100473

Solicitation # 2100473

This solicitation, numbered 2100473, is for a DC Feeder Breaker rated at 3000 amps, issued by the Dallas Area Rapid Transit Authority, and is open for bidding with a response deadline of August 13, 2026. All bids must comply with DART’s standard Purchase Order Terms and Conditions, which are accessible via supporting documentation and govern the entire procurement process. Freight must be quoted under FOB Destination terms, with shipping costs included in the total bid price; FOB Origin or Prepay and Add terms are not accepted. Delivery schedules are critical, and failure to meet specified timelines may result in immediate rejection or termination for default. Payment is strictly Net 30, with invoices required to be submitted in triplicate to APInvoices@dart.org, one clearly marked as original, and must include the purchase order number, item details, quantities, unit prices, and extended totals. Payment timing is based on the later of invoice receipt or order receipt. The Authority reserves the right to terminate the contract in whole or in part if the seller fails to perform as required, holding the seller liable for reprocurement costs, unless the failure is proven to be beyond the seller’s or their subcontractors’ control, in which case termination may be reclassified as for convenience. All vendors must register on Bonfire to access the full BidTable and complete their submission.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

MODULE, VCU- DI, SM 321,16 CH, | 2100474

Solicitation # 2100474

Bids are solicited for a MODULE, VCU-DI, SM 321, 16 CH under solicitation number 2100474 by the Dallas Area Rapid Transit Authority, with responses due by August 20, 2026. All submissions must adhere to FOB Destination shipping terms, with freight costs included in the quoted price; FOB Origin or Prepay and Add terms are not accepted. Delivery timelines are critical, and failure to meet specified dates will result in rejection or termination of the order. Payment is governed by Net 30 terms, with invoices required in triplicate, clearly marked as original, and including the purchase order number, item details, quantities, pricing, and extended totals, sent to APInvoices@dart.org. Payment timing begins 30 days after the later of invoice receipt or order receipt unless otherwise agreed in writing. The Authority reserves the right to terminate the contract in whole or in part for nonperformance, with the seller liable for reprocurement costs, unless the failure is beyond their control, in which case termination may be reclassified as for convenience. Access to full bid details requires registration on the Bonfire platform and completion of the Prepare Your Submission process.

POSTED

DEADLINE

Minority- and Women-Owned Business Participation in Hardware SupplyDallas Area Rapid Transit is seeking participation from certified Minority- and Women-Owned Business Enterprises in the procurement of hardware and related industrial supplies under a subcontract opportunity posted on August 6, 2026, with a response deadline of August 11, 2026. The solicitation encourages the inclusion of MBE, WBE, and DBE suppliers to promote diversity in the supply chain for NAICS code 423830, which covers wholesale trade of hardware and related industrial supplies. While no set-aside designation is specified, active encouragement of certified diverse suppliers is a central requirement, and all participants are expected to demonstrate measurable efforts to engage and integrate these businesses into the procurement process. The place of performance and point of contact details are not provided, but the opportunity is accessible through the DART BonfireHub portal.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Commercial Supply of WashersDallas Area Rapid Transit is seeking commercial suppliers to provide flat washers measuring 1/2 inch with a zinc yellow finish, packaged in quantities of 10 each, under a subcontract agreement. The solicitation was posted on August 6, 2026, with a response deadline of August 11, 2026, at 7:00 PM. The NAICS code 332313 identifies the product category as other hardware manufacturing, indicating the focus is on standardized metal components. There is no set-aside designation specified, and the performance location and point of contact details are not provided. All responses must be submitted through the designated online portal at the provided link, and the contract anticipates delivery of the specified washers in compliance with the defined packaging and finish requirements.

Plate Work Manufacturing

POSTED

DEADLINE

Commercial Supply of Fasteners and HardwareThe contract titled Commercial Supply of Fasteners and Hardware involves the procurement of standard industrial hex bolts measuring 1/2-13 x 1 inch, rated Grade 8 with a zinc yellow finish, delivered in standardized packages of ten units each. This is a subcontract opportunity issued by Dallas Area Rapid Transit under the NAICS code 332313, with a posted date of August 6, 2026, and a firm response deadline of August 11, 2026, at 7:00 PM. The work is to be performed in Texas, though no specific city or address is provided for performance or contact details. The solicitation does not specify a set-aside type or additional eligibility requirements, leaving participation open to qualified suppliers without preferred status designations. Interested vendors must submit responses prior to the deadline through the referenced online portal to be considered for award.

Plate Work Manufacturing

POSTED

DEADLINE