Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

HVAC Control System Integration & Installation

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the replacement of existing York HVAC controllers with Johnson Controls BACnet MSTP controllers at the Yuma Area Office. The scope includes not only the removal and installation of new controllers but also the full system integration, configuration, and commissioning to ensure proper functionality and coordination within the existing HVAC system. This project aims to upgrade the control system to a more advanced BACnet MSTP protocol for improved performance and compatibility. Administered by the Lower Colorado Regional Office of the Department of the Interior, this subcontract falls under the NAICS code 238220, which pertains to plumbing, heating, and air-conditioning contractors. The solicitation does not specify a set-aside type or a dedicated point of contact, and no detailed location data beyond the Yuma Area Office is provided. The contract was posted on June 3, 2026, highlighting a commitment to modernizing facility infrastructure through this targeted HVAC control system installation and integration.

General Info

Replace York HVAC controllers with Johnson Controls BACnet MSTP, including installation and system integration.

Agency

Department Of The Interior → Lower Colorado Regional OfficeView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

NV

Set-Aside

NONE

Documents

This scope was carved out of 140R3026Q0082.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

J--YAO Building HVAC Control System Upgrades

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 3

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Lower Colorado Regional Office

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Lower Colorado Regional Office

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Replace existing York HVAC controllers with Johnson Controls BACnet MSTP controllers at the Yuma Area Office, including system integration, configuration, and commissioning.

Similar Contracts

Same NAICS industry code

CBP5933 Bldg. 225 HVAC Replacement

Solicitation # CBP5933

Management & Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontract to replace six split-system heat pump HVAC systems at Building 225 of the San Diego Job Corps Center in Imperial Beach, California. The scope of work includes the installation of three 2-ton and three 1.5-ton Payne heat pump systems with matching indoor air handlers, including the removal and disposal of old equipment and the reuse of suitable existing ductwork and electrical systems. The estimated contract value ranges from $25,000 to $100,000, and the award will be based on the overall best value, evaluating price, quality, and delivery schedule. Bids are due by September 11, 2026, and must include a signed bid form and a detailed cost breakout on company letterhead. The project is subject to the Davis-Bacon Act, requiring compliance with prevailing wage rates and federal labor standards, including specific paid sick leave and minimum wage requirements. For bids equal to or greater than $25,000, contractors must provide a bid bond of 20% of the base bid, as well as performance and payment bonds from an A-rated surety company. Technical compliance requires adherence to California Mechanical and Electrical Codes, OSHA standards, and U.S. Department of Energy efficiency ratings. Awardees must provide a Unique Entity Identification (UEI) number and certify their business size category under FAR 52.219-8. Work must commence within 30 calendar days of the Notice to Proceed, and final payment is contingent upon the submission of a Notice of Final Completion, certified payroll reports, and operation and maintenance manuals.

San Diego Job Corps Center

POSTED

about 9 hours ago

DEADLINE

RFQ#3191 Laundry Tray Installations

Solicitation # rfq3191-laundry-tray-installations-0

Management & Training Corporation is seeking bids for a subcontracting opportunity under RFQ 3191 to perform laundry tray installations at the Charleston Job Corps Center located at 1000 Curtis Price Way, Charleston, West Virginia. This solicitation falls under NAICS code 238220 and is open to various small business set-asides, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their bids by September 11, 2026, at 3:00 PM EST, with a pre-bid meeting scheduled for September 3, 2026. The procurement process requires the submission of a supplier packet including a W-9 and a supplier self-certification form to establish vendor setup and tax information. Selected subcontractors must comply with the Service Contract Act and adhere to the wage rates and fringe benefits specified in Wage Determination 2015-4347 for Kanawha, Boone, and Clay counties. The contract also mandates specific insurance requirements, indemnification clauses, and compliance with Federal Funding Accountability and Transparency Act reporting. Primary contact for this opportunity is Wendy Lawrence.

Management & Training Corporation

POSTED

about 9 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dorm buildings in Indiana, with four bathrooms per building. The scope of work includes repairing or replacing piping in poor condition leading into the diverters and upgrading the existing Powers brand systems to Delta or a comparable style featuring readily available parts. Interested parties must attend a site visit on September 1, 2026, at 10:30 AM. Proposals are due by September 14, 2026, at 3:00 PM and should be submitted via email to Tammy Swallows at Atterbury Job Corps. This solicitation is set aside for small businesses and other designated disadvantaged business categories under NAICS code 238220.

Adams & Associates

POSTED

about 9 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

This subcontracting opportunity, managed by Serrato Corporation DBA North Texas Job Corps, involves the replacement of a failing chiller in Buildings 214 and 215 at the North Texas Job Corps Center in McKinney, Texas. The scope of work encompasses the demolition and disposal of the existing unit, the installation and startup of a new air-cooled chiller, and the integration of building automation controls. Additional requirements include the cleaning and inspection of air handling units, the replacement of control valves and variable frequency drives, and the submission of all necessary project documentation. The solicitation is open to various small business set-asides, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses under NAICS code 238220. Key deadlines include a pre-bid walkthrough on September 4, 2026, a question submission deadline of September 11, 2026, and a final bid due date of September 18, 2026. Selected contractors must provide Davis-Bacon certified payroll documentation and meet specific insurance requirements, with all quotes remaining valid for 90 days. Primary contact for this project is Stacy Smith.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 9 hours ago

DEADLINE

RFQ#8911 Fire Suppression System Repairs

Solicitation # rfq8911-fire-suppression-system-repairs-1

Management and Training Corporation is seeking a subcontractor for fire suppression system repairs at the Edison Job Corps Center located at 500 Plainfield Ave, Edison, New Jersey. This solicitation, identified as RFQ 8911, is a fixed-price, single lump sum contract under NAICS code 238220. The opportunity is set aside for small businesses, including small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, and veteran-owned small businesses. Responses must be submitted by September 11, 2026. The project requires adherence to the Davis-Bacon Act, specifically following the New Jersey General Decision Number NJ20250036 modification 8 for prevailing wage and fringe benefit rates in Middlesex County. Bidders must provide a bid breakout, insurance documentation, references, and both bid and performance/payment bonds. Additionally, selected suppliers must complete a self-certification and set-up packet, including a W-9 and verification of their business classification and debarment status. Primary contact for this opportunity is Wendy Lawrence.

Management & Training Corporation

POSTED

about 9 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # aal-0880-02-hvac-electrical-upgrades-fairbanks

Solicitation AAL-0880-02, managed by PTSI Managed Services Inc., outlines a project for HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska. The scope of work involves replacing the existing chiller, four air conditioning units, and chilled-water piping, along with the associated electrical systems. Key requirements include modifying Panel P1 and HVAC circuits and providing temporary and redundant cooling systems throughout the construction phase to ensure continuous operation. The project concludes with startup, testing, commissioning, FAA training, punch-list completion, and final closeout. This opportunity is designated as a small business set-aside, open to SDB, WOSB, HUBZone, and VOSB certified entities under NAICS code 238220. The estimated construction magnitude is between 250,000 and 500,000 dollars, with a proposed start date of April 15, 2027. The solicitation was posted on August 28, 2026, with a response deadline of September 25, 2026.

PTSI Managed Services Inc.

POSTED

about 9 hours ago

DEADLINE

WOJC - Replacement of Condensing Unit and Evaporator Coil – Walk-In Freezer

Solicitation # wojc-replacement-condensing-unit-evaporator-coil-walk-freezer

The Westover Job Corps Center in Chicopee, Massachusetts, is seeking quotes for a subcontracting project involving commercial door repair services and the replacement of a condensing unit and evaporator coil for a walk-in freezer. This opportunity is set aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses. Interested bidders must submit a current SAM.gov UEI number, active registration confirmation, business licenses, a W-9, and an FFATA form if applicable. All inquiries and requests for required forms should be directed to Garrett Owens via email. The deadline for bid submissions is September 11, 2026.

Westover Job Corps Center

POSTED

about 9 hours ago

DEADLINE

Sprinkler System Inspection 2026

Solicitation # Fire Sprinkler System Inspection 2026

The Earle C. Clements Job Corps Center, through Management & Training Corporation, is soliciting bids for the inspection and testing of 24 sprinkler systems located in Morganfield, Kentucky. The scope of work includes approximately 18 wet systems and 6 dry systems distributed across various facilities, including dormitories, the Student Union, Maintenance Office, Cold Storage, Logistics, Transportation, and the Jackie Robison Building. The contractor is responsible for providing all necessary labor and materials to perform riser testing on wet systems and trip testing on dry systems. All inspections must be conducted during regular business hours, Monday through Friday, from 8:00 AM to 5:00 PM CST. Additional repairs are specifically excluded from this scope of work. This is a small business set-aside opportunity under NAICS code 238220. Bidders must submit a lump sum fee and a comprehensive supplier packet, including a W-9, self-certification form, proof of insurance, and acceptance of terms and conditions, by September 9, 2026. The contract requires strict adherence to Service Contract Act wage determinations, specifically Wage Determination 2015-4687 Revision 31. Additionally, the contractor must comply with federal regulations regarding the protection of sensitive information, the Buy American Act, and combating trafficking in persons. Subcontractors with awards exceeding 30,000 dollars must disclose their debarment status per FAR 52.209-6 and obtain a Unique Entity ID for FFATA reporting if the project value reaches 40,000 dollars or more.

Earle C. Clements Job Corps Center

POSTED

about 9 hours ago

DEADLINE

AC Compressor Replacements for Gym, Academic and Kitchen Area

Solicitation # MI 2026-05

The Miami Job Corps Center, operated by Adams and Associates, Inc. for the U.S. Department of Labor, is soliciting bids for the replacement of damaged AC compressors in the gym, academic, and kitchen areas. The project involves replacing units that are over 20 years old and utilize phased-out gas, specifically targeting two compressors for AHU-E3 and one each for AHU-E5 and AHU-E6 in the gym, one for AHU-B5 in the academic area, and one for AHU-F2 in the kitchen. The selected contractor must provide a single lump sum bid with a detailed cost breakdown and is responsible for the installation of new units, disposal of old equipment, and the provision of training, operating manuals, and manufacturer warranties. All work must comply with OSHA, EPA, and Florida state and local building codes, with a one-year guarantee on all workmanship. The award will be based on best value, with evaluation weights distributed across price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent). Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and provide a valid Florida Contractor's License, insurance certificates naming Adams and Associates, Inc. as an additional insured, and certification of compliance with Davis-Bacon wage determinations. Proposals are due by September 3, 2026, and must include a vendor questionnaire, W9, and a sequenced construction schedule submitted within 10 days of the Notice to Proceed. Payment is set at Net 30 terms, contingent upon the submission of certified payroll records, release of liens, and a completed SF 1413.

Miami Job Corps Center

POSTED

about 9 hours ago

DEADLINE

CBP#3642 HVAC Replacement for Building F

Solicitation # CBP#3642

Management and Training Corporation (MTC) is seeking bids for a subcontracting opportunity to replace the rooftop HVAC system at the Charleston Job Corps Center in Charleston, West Virginia. The project requires the contractor to provide all labor, materials, equipment, and supervision to replace the existing ACU-F1 unit with a new 10-ton cooling and 205 MBH gas heating input packaged rooftop unit. Key technical requirements include compliance with Energy Star and ASHRAE 90.1 efficiency standards, the use of non-ozone-depleting refrigerants, and the integration of the new unit into the existing building automation system and BACnet direct digital controls. The contractor is also responsible for the removal and disposal of old equipment per EPA and ASHRAE 15 guidelines and must install new NEMA 3R electrical disconnects and duct smoke detection as required by code. This is a fixed-price, single lump sum contract with bids due by August 31, 2026. Award will be based on overall best value. Bidders must provide a base bid and a detailed cost breakout. For projects valued at $25,000 or more, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety company with at least an A- rating. The contractor must adhere to Davis-Bacon Act prevailing wage rates for Kanawha County and comply with various FAR clauses, including those regarding small business utilization and the Drug-Free Workplace Act. Required submission documents include the MTC Bid for Lump Sum Contract form, a UEI number, and a W-9. Performance will begin within five business days of an agreed-upon start date, and final acceptance is subject to system startup testing and air balancing verification.

Management & Training Corporation

POSTED

about 9 hours ago

DEADLINE

CBP5934 Bldg. 181 HVAC Compressor Replacement

Solicitation # CBP5934

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, lump sum subcontract to replace a failed HVAC compressor in Building 181 at the San Diego Job Corps Center in Imperial Beach, California. The scope of work includes the removal of the defective compressor, installation of a new unit, system evacuation, refrigerant charging, and full commissioning to restore cooling capacity to the facility's cafeteria. The project must be completed within 30 days of the Notice to Proceed, with work commencing within five business days of that notice. Bids are due by September 11, 2026, and must be submitted electronically to Tom Williams. The opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and VOSB. Award decisions will be based on overall best value, evaluating price, quality, delivery schedule, and compliance with bonding and insurance requirements. Mandatory requirements include a site visit, submission of a detailed bid breakout, and adherence to Davis-Bacon Act prevailing wage rates for San Diego County. Contractors must provide proof of general liability, auto, and worker's compensation insurance, and must possess a Unique Entity Identifier (UEI). Bid and performance bonds are required for contracts valued at $25,000 or more.

San Diego Job Corps Center

POSTED

about 9 hours ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026- Maui- Dorm Exhaust Fans

Management and Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontracting opportunity to remove and replace approximately 25 exhaust fans across three dormitories at the Hawaii Job Corps Center - Maui. The project objective is to improve ventilation efficiency, which includes the safe disposal of old units, installation and testing of new approved fans, and the full restoration of damaged drywall and plaster to match existing textures and paint. Bids are due by August 28, 2026, and will be evaluated based on overall best value. The opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Due to the project being on a federal facility, it is subject to Construction Wage Rate Requirements (Davis-Bacon Act) and requires the payment of prevailing wages and weekly certified payroll reporting. Contractors must provide a detailed cost breakout on their letterhead and submit a complete MTC Supplier Packet, including a W-9 and UEI number. Financial and security requirements are stringent. A bid bond of 20% is required for bids equal to or greater than 25,000 dollars, as are performance and payment bonds. Insurance requirements include 1 million dollars per occurrence for general liability, 1 million dollars for auto, and 500,000 dollars for workers' compensation. MTC will retain 10% of payment until substantial completion and final acceptance. The period of performance will be determined during an onsite pre-construction meeting following the issuance of a Notice to Proceed.

Management & Training Corporation

POSTED

about 9 hours ago

DEADLINE

in about 2 hours

More opportunities from Department Of The Interior → Lower Colorado Regional Office

Same awarding agency

46--YDP REVERSE OSMOSIS PRESSURE VESSELS

Solicitation # 140R3026Q0091

The U.S. Department of the Interior, Bureau of Reclamation, Lower Colorado Basin Yuma Area Office, is planning to procure 292 pressure vessels and associated equipment for the Yuma Desalting Plant through a forthcoming solicitation to be released on or about July 10, 2026, via SAM.gov. This pre-solicitation notice serves to inform potential contractors of the upcoming opportunity, which will be issued as an unrestricted, firm fixed price contract under NAICS code 333310 with a small business size standard of 1,000 employees. All submissions, including quotes and amendments, must be made electronically through the Contract Opportunities portal on SAM.gov, and no documents or details beyond this notice are available until the official solicitation is posted. To be eligible for award, offerors must be actively registered in the System for Award Management and have completed all required Online Representations and Certifications prior to submission. The response deadline for the solicitation is set for July 10, 2026, at 7:00 PM Eastern Time, though all dates remain subject to change. Any contractual inquiries must be submitted in writing via email to colleen_samuels@ios.doi.gov; telephone inquiries will not be accepted. The point of contact for this opportunity is Colleen Samuels, and the contracting office is located in Boulder City, Nevada, with performance expected to support the Yuma Desalting Plant.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

J--Hoover Dam Armature Rewind IDIQ

Solicitation # 140R3026Q0048

Solicitation 140R3026Q0048 is a request for quotes for a five-year Indefinite Delivery/Indefinite Quantity (IDIQ) firm-fixed price commercial contract to provide armature rewind maintenance and repair services for the Bureau of Reclamation at Hoover Dam. The period of performance runs from September 21, 2026, through September 20, 2031. The scope of work requires an EASA-certified contractor to inspect, test, clean, repair, rewind, and resurface generator armatures weighing approximately 11,000 to 13,000 lbs each. Services include the transportation of armatures to and from the Hoover Dam Central Warehouse in Boulder City, Nevada, and the performance of all work in strict accordance with EASA Standard AR100-2015. The contract is structured with annual line items for repair and rewind services, nameplate testing, engraving and painting, and optional core or commutator replacements. Evaluation for award is based on technical capability, past performance within the last three years, price reasonableness, and small business participation. While the acquisition is not set aside for small businesses, offerors classified as other than small businesses under NAICS 811310 must submit a Small Business Subcontracting Plan and a Small Business Participation Document. Award is anticipated within 60 days of receiving quotes, and the government may accept quotes other than the lowest based on the highest perceived value.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

89--HD BOTTLED WATER DELIVERY SERVICE

Solicitation # 140R3026Q0123

The HD BOTTLED WATER DELIVERY SERVICE solicitation, identified by number 140R3026Q0123, is a Small Business Set Aside contract issued by the Department of the Interior’s Lower Colorado Regional Office located in Boulder City, Nevada. This opportunity is exclusively reserved for small businesses under NAICS code 312112, which pertains to bottling of drinking water, and the award will be made without competition from non-small business entities. Proposals must be submitted by the deadline of August 27, 2026, at 4:00 PM Eastern Time, following the posting date of August 6, 2026. The service requires reliable and consistent delivery of bottled water to unspecified locations within the agency’s operational area, with performance expected to meet quality and timeliness standards aligned with federal procurement requirements. Primary point of contact for inquiries is Bryan Williamson, reachable via email at bwilliamson@usbr.gov or by phone at 702-293-8452. All responses and communications must be directed through the official SAM.gov portal linked in the solicitation.

Bottled Water Manufacturing

POSTED

DEADLINE

M--OPERATION AND MAINTENANCE OF YDP, IDIQ

Solicitation # 140R3026R0012

The U.S. Department of the Interior, Bureau of Reclamation, is pursuing a five-year Indefinite-Delivery/Indefinite-Quantity (IDIQ) contract for Operation and Maintenance (O&M) services at the Yuma Desalting Plant and Water Quality Improvement Center in Yuma, Arizona. The contract has a ceiling value of $29,990,000 and is structured as a 100% Competitive 8(a) Set-Aside, restricting eligibility exclusively to certified small disadvantaged businesses under the 8(a) program. The North American Industry Classification System (NAICS) code is 561210, with a small business size standard of $47 million in annual receipts. The contractor will provide 24/7/365 operations and maintenance support, ensuring the facility remains in ready reserve status to support potential demonstration runs at 33%, 66%, or 100% operational capacity, though no immediate full-scale operation is anticipated. Performance is governed by compliance with Minute 242 of the U.S.-Mexico Water Treaty, requiring treated water to maintain an average salinity of no more than 115 (+30) ppm at Morelos Dam. The acquisition will be conducted under FAR Part 12 for commercial items and FAR Part 15 for negotiated contracting, with task orders issued over the contract term based on fluctuating operational and research needs. A site visit is tentatively planned for late July 2026, and all formal solicitation documents will be posted on SAM.gov no earlier than July 20, 2026. Interested parties must be registered in SAM.gov and must submit a capability statement not to exceed five pages during the pre-solicitation phase, including detailed resumes of proposed key personnel and evidence of past performance on similar O&M contracts. No proposals will be accepted until the formal solicitation is issued, and all communications must be directed via email to the designated Contract Specialist. The performance location is exclusively in Yuma, Arizona, and the contract includes requirements for organizational conflict of interest mitigation, technology transfer collaboration with federal research programs, and adherence to strict security and access protocols.

Facilities Support Services

POSTED

DEADLINE

in about 1 month

80--Belzona Direct Purchase

Solicitation # 140R3026Q0134

The Department of the Interior, through the Lower Colorado Regional Office in Boulder City, Nevada, has issued a presolicitation notice for the Belzona Direct Purchase under solicitation number 140R3026Q0134. This procurement falls under NAICS code 325510 and is managed by the office located in Nevada. The opportunity was posted on August 19, 2026, with a response deadline set for September 2, 2026. Interested parties can coordinate with the primary point of contact, Noah Maye, via email or phone to address inquiries regarding this purchase.

Paint and Coating Manufacturing

POSTED

DEADLINE

Z--CABLEWAY CRANE REFURBISHMENT

Solicitation # 140R3026R0010

The Bureau of Reclamation’s Lower Colorado Regional Office is soliciting proposals for the comprehensive refurbishment of a 150-ton cableway crane at Hoover Dam, spanning the Nevada and Arizona borders. The scope includes replacing all major wire ropes—six 3-1/2-inch track ropes, two 3/4-inch button line ropes with tensioners and buttons, and 1-1/8-inch inhault, outhaul, and hoist ropes—along with refurbishing the existing carriage, redesigning and installing slack carriers, replacing sheaves, lubricating hoist house components, and re-tensioning track cables. The work is structured over an 850-calendar-day performance period beginning within 10 days of notice to proceed, with an estimated timeline from September 30, 2026, to December 29, 2028. Phase one requires all equipment and materials to be procured and delivered on-site within the first year, while phase two focuses on installation and fieldwork, with onsite construction slated to begin in May 2028 contingent upon the completion of the penstock outage. Key deliverables include an initial schedule within 15 days of award, material specifications within 30 days, and full material delivery within 365 days. The contract is a firm-fixed-price construction type awarding to the offeror presenting the best value, with technical factors (experience, capability, past performance, safety plan, and small business participation) significantly outweighing price in evaluation. The solicitation mandates strict compliance with federal and Department of the Interior regulations, including incorporation of FAR and DIAR clauses covering contract performance, Buy American Act requirements for construction materials, inspection of construction under FAR 52.246-12, electronic invoicing via the Treasury’s IPP system, and safeguarding controlled unclassified information. Offerors must be registered in SAM with a valid UEI, submit a complete online representation and certification package, and include bid, performance, and payment bonds under SF-24, SF-25, and SF-25A forms. A subcontracting plan is required if the contract exceeds $2 million, and all subcontracts must include FAR 52.219-8, with subcontractors over $2 million subject to FAR 52.219-9. Proposals must adhere to detailed formatting rules—8.5 x 11 inch pages, single-spaced 12-point font

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Hollow Core Drill Bit SupplyThe contract outlines the supply of commercial off-the-shelf hollow core drill bits ranging in size from 3/8 inch to 1 inch, intended for use in the field installation and maintenance of stoplog seals. These drill bits are critical components for ensuring the proper function and longevity of hydraulic structures, particularly in environments requiring precise and reliable drilling for seal placement and repair. The work is categorized as a subcontract under NAICS code 423830, which corresponds to wholesale trade of construction materials, indicating a focus on procurement through established supply channels rather than custom manufacturing. The solicitation was posted on May 7, 2026, under the Lower Colorado Regional Office of the Department of the Interior, emphasizing the federal agency’s operational need for standardized, high-quality tools to support infrastructure maintenance in water management systems. While specific performance locations and point of contact details are not provided, the requirement is clearly tied to field operations where durability, accuracy, and compatibility with existing equipment are essential.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

U-Shaped Neoprene Stoplog Seal FabricationFifteen U-shaped neoprene seal assemblies are to be fabricated for the Brock Reservoir Gate in accordance with Reclamation design drawings and strict material specifications. Each seal must meet a Shore A hardness range of 60 to 70 and demonstrate a minimum tensile strength of 2,500 psi to ensure durability and performance under operational conditions. The work is being conducted under a subcontract issued by the Lower Colorado Regional Office of the Department of the Interior, with the North American Industry Classification System code 326299 indicating it falls under other rubber product manufacturing. The solicitation was posted on May 7, 2026, and the performance location is tied to the Brock Reservoir site, though specific city or state details are not provided. All fabrication must adhere precisely to technical requirements without deviation, ensuring compatibility and functionality within the existing gate system.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Logistics, Packaging, and Delivery CoordinationThis contract involves coordinating the shipment of pump systems to Yuma, Arizona, with a focus on ensuring the equipment arrives in perfect condition. The delivery terms specify F.O.B. Destination, meaning the seller is responsible for the transportation and any risks involved until the pump systems are delivered to the specified location. The scope includes logistics planning, packaging suitable for heavy industrial equipment, and managing the delivery process for safe and timely receipt. The contract is categorized under NAICS code 484121, which relates to general freight trucking, indicating the involvement of transportation services. Issued by the Lower Colorado Regional Office of the Department of the Interior, this subcontract emphasizes careful handling and coordination to meet the needs of a government agency. Although certain details such as solicitation number, type of set-aside, and specific performance location are not provided, the key objective remains the dependable and secure delivery of critical pump systems to the designated site in Yuma.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Technical Documentation and O&M Manual DevelopmentThis contract involves the development of detailed Operation and Maintenance (O&M) manuals for pump systems, encompassing essential technical information such as performance curves, test data, lubrication instructions, and parts lists. The purpose is to create comprehensive documentation that supports effective management and upkeep of the pump equipment, ensuring operational reliability and ease of maintenance. The work falls under the NAICS code 541690, indicating specialized technical services. Issued by the Lower Colorado Regional Office of the Department of the Interior, this subcontract was posted in mid-April 2026. Although specific location details and point of contact information are not provided, the contract clearly focuses on producing technical documentation critical for system operators and maintenance personnel. The deliverables aim to enhance the understanding and functionality of the pump systems through well-organized and thorough manuals.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Coating and Corrosion Protection ServicesThis contract involves providing coating and corrosion protection services specifically applying an NSF-approved epoxy coating with a 12 mil dry film thickness on pump components. The preparation for coating must adhere strictly to SSPC SP-10 standards to ensure surface cleanliness and suitability, and the materials used must be free from any restricted chemicals. The aim is to enhance the durability and corrosion resistance of the pump parts within the specified industrial parameters. Issued by the Lower Colorado Regional Office under the Department of the Interior, this subcontract falls under NAICS code 332813, which pertains to coating manufacturing. Although details such as the solicitation number, set-aside status, and specific location of performance are not provided, the contract emphasizes adherence to industry-standard surface preparation and coating application methods to ensure high-quality corrosion protection. The contract was posted in April 2026 and is accessible through the provided government workspace link for further review.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Vertical Turbine Pump Supply (Floway-Interchangeable Systems)This contract involves the supply of two vertical turbine pump systems, specifically Floway-interchangeable models 12DKL-01STG and 16DKL-01STG. These pump systems will be fully water-lubricated and designed to meet industry standards including ASTM, NEMA, and NSF, ensuring high quality and reliability. The procurement falls under the NAICS code 333914, which covers pump and pumping equipment manufacturing. The contract is issued as a subcontract by the Department of the Interior’s Lower Colorado Regional Office, with the solicitation posted in April 2026. Although certain location details and points of contact are not specified, the emphasis is on acquiring pump systems that conform to specified technical and regulatory standards, suitable for applications requiring durable and interchangeable turbine pumps.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE