Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

HVAC System Installation

Active

State & Local

Response Deadline08/12/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply and installation of a complete heating, ventilation, and air conditioning system for an 11,100 square foot addition to a municipal building, encompassing all required ductwork, terminal units, control systems, and seamless integration with sustainability initiatives to ensure energy efficiency and environmental compliance. The work must meet high-performance standards and include coordination with existing building systems to maintain operational continuity and optimal indoor air quality across all zones. Subcontractors must respond by the deadline of August 12, 2026, with work governed under NAICS code 238220 for HVAC installation services. The procurement is administered by the Alabama agency under the Procurement office, with performance expected at the municipal building site though specific location details are not provided. The contract does not specify set-aside status or point of contact, and all inquiries should be directed through the official portal link provided.

General Info

Supply and install HVAC system for 11,100 sq ft municipal addition with energy efficiency and integration requirements by August 12, 2026.

Agency

Alabama → ProcurementView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

AL, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 06:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyAlabama → Procurement

ContactsNo contacts available

OfficeN/A

Organization / Agency

Alabama → Procurement

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and installation of heating, ventilation, and air conditioning systems, including ductwork, units, controls, and integration with sustainability features for an 11,100 sq. ft. municipal building addition.

Similar Contracts

Same NAICS industry code

Emergency On-Call Repair and ResponseThe contract titled Emergency On-Call Repair and Response requires providers to deliver continuous 24/7 emergency response services for failures in fire alarm, sprinkler, or suppression systems across the State of Rhode Island. Contractors must initiate repairs within 48 hours of being notified of a system malfunction to ensure compliance with life safety standards and regulatory requirements. The work is classified under NAICS code 238220, indicating it falls under the plumbing, heating, and air-conditioning contracting category, and is structured as a subcontract opportunity. Responses are due by August 26, 2026, with the solicitation posted on August 1, 2026, and all performance expected to occur within Rhode Island. All parties must be prepared to respond at any time, regardless of day or night, and deliver timely, qualified service to maintain public safety and system integrity.

State of Rhode Island

POSTED

about 20 hours ago

DEADLINE

Special Hazard Suppression System MaintenanceThe contract involves the annual inspection and testing of specialized fire suppression systems, including Inergen, FM-200, and kitchen hood systems, with required cylinder checks and maintenance performed in full compliance with UL standards. The work must be carried out by a qualified contractor capable of ensuring the systems remain operational and meet regulatory safety requirements throughout the year. This is a subcontract under the State of Rhode Island, categorized under NAICS code 238220, and is open for bids with a submission deadline of August 26, 2026. The opportunity was posted on August 1, 2026, and all performance is expected to align with state safety protocols, though specific locations for service are not detailed. Interested parties must submit proposals through the official Rhode Island Department of Public Works bidding portal before the stated deadline.

State of Rhode Island

POSTED

about 20 hours ago

DEADLINE

Sprinkler System Inspection and Flow TestingThe contract requires the performance of annual and semi-annual inspections, testing, and maintenance for wet, dry, and pre-action sprinkler systems, ensuring full compliance with NFPA 13 and NFPA 25 standards. This includes detailed valve checks and fire hydrant flow testing to verify system readiness and performance under operational conditions. All work must be conducted with precision to maintain code compliance and ensure life safety systems remain functional and reliable throughout the contract period. The opportunity is classified as a subcontract under NAICS code 238220 and is issued by the State of Rhode Island through its Rhode Island agency. The solicitation was posted on August 1, 2026, with a response deadline of August 26, 2026, at 5:30 PM. While specific location details and point of contact information are not provided, the work is expected to occur within the jurisdiction of the State of Rhode Island. Interested parties must submit proposals by the stated deadline to be considered for award.

State of Rhode Island

POSTED

about 20 hours ago

DEADLINE

Fire Alarm System Testing and MaintenanceThe contract entails performing required inspection, testing, and maintenance services for fire alarm systems across state facilities in Rhode Island, with tasks scheduled on a quarterly, semi-annual, and annual basis. Services include comprehensive testing of individual devices, evaluation of control panels, and submission of UTR reports in full compliance with NFPA 72 standards. The work must be executed with precision to ensure system reliability and regulatory adherence throughout all designated state locations. The contract is classified as a subcontract under NAICS code 238220 and is being procured by the State of Rhode Island through its Department of Administrative Services. Bidders must submit responses by August 26, 2026, at 5:30 PM, following the posting date of August 1, 2026, with all details accessible via the official state bidding portal.

State of Rhode Island

POSTED

about 20 hours ago

DEADLINE

HVAC Mechanical SystemsThe contract covers the installation of heating, ventilation, and air conditioning systems along with associated ductwork and rooftop units under a subcontract tied to the Department of Defense through the Defense Logistics Agency. The work is classified under NAICS code 238220, indicating it pertains to HVAC mechanical systems installation within federal infrastructure projects. The contract was posted on August 1, 2026, and is linked to a larger procurement effort identified by the contract number SPE7M117D0001 and delivery order SPE7LX26F86D0. Performance location details are unspecified, but the scope implies on-site execution at DOD facilities. No set-aside provisions or small business preferences are indicated, and the contract remains open for execution by the prime contractor’s designated subcontractor without further public bid details.

Defense Logistics Agency

POSTED

DEADLINE

Fiber Optic Cable Installation and SplicingThe contract awards the installation, pulling, and fusion splicing of fiber optic cable to establish a dedicated backbone communications network connecting field devices to the Traffic Management Center. This work supports the Intelligent Transportation Systems infrastructure and requires precise technical execution to ensure reliable, high-capacity data transmission. The scope encompasses all labor, materials, and methodologies necessary to deploy and terminatе fiber optic links in compliance with industry standards for performance and durability. The subcontract is issued under the NAICS code 238220 for Electrical and Other Wiring Installation Contractors and is managed by the Defense Logistics Agency within the Department of Defense. The contract was posted on August 1, 2026, with performance expected to occur at unspecified locations under the jurisdiction of the Department of Defense. All work must meet stringent operational requirements to support critical transportation control systems, and the subcontractor is responsible for full compliance with all technical, safety, and scheduling obligations without additional direction.

Defense Logistics Agency

POSTED

DEADLINE

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with a NAICS code of 238220 covering plumbing, heating, and air-conditioning contractors. It pertains to the installation of potable water, waste drainage, and gas piping systems within commercial or institutional buildings, requiring specialized expertise in mechanical systems compliance and building code adherence. The solicitation was posted on August 1, 2026, with a response deadline of August 24, 2026, and is managed by the ASC Commodities Division under the Department of Defense, though specific performance location and point of contact details are not provided. Contractors must submit proposals before the deadline to be considered for award under this set-aside, ensuring eligibility and compliance with small business certification requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Steam Piping System Rework and WeldingThe contract entails a complete rework of the steam piping system located in the basement of a correctional facility operated by the state of Iowa. The scope includes the full removal of existing piping, fabrication and installation of new fittings, precision welding, rigorous pressure testing to ensure system integrity, and final reinstallation in accordance with safety and operational standards. All work must comply with industry best practices and must be executed without disrupting the facility’s essential operations, given the critical nature of the location. The project is classified under NAICS code 238220, indicating it falls under plumbing, heating, and air-conditioning contracting, and is issued as a subcontract opportunity with no set-aside provisions. Bids are due by August 17, 2026, and interested parties must submit through the specified online portal prior to the deadline.

POSTED

DEADLINE

Mount Pleasant Correctional Facility - Building 20 Automated Valve Refit

Solicitation # 005-RFB-2942-2027

The Iowa Department of Administrative Services is soliciting competitive bids for welding and piping services to refit Building 20 at the Mount Pleasant Correctional Facility with a new automated steam valve system to support heating in the MLO Building. The contract requires the full scope of work including demolition of existing steam pressure-reducing valves and piping, fabrication and installation of a new 4-inch steam header with six 2-inch threaded outlets, installation of new actuated valves with isolation and union fittings, routing of a 4-inch relief line to the building exterior, tie-in of the water heater to both high- and low-pressure steam systems, and reintegration of existing steam backfeed piping. All work must comply with applicable codes, involve certified welding, and include proper structural supports, wall penetrations with fire and weather sealing, and full testing and commissioning. The contractor must provide as-built drawings, manufacturer documentation, operation and maintenance manuals, and a commissioned test report. The work is expected to commence in mid-to-late August 2026 with substantial completion by September 30, 2026, and includes a mandatory site visit on August 11, 2026. Bids must be submitted by August 17, 2026, through the designated online portal, with bidders required to certify and resubmit any amendments received prior to the deadline. The contract will be non-exclusive, allowing the Lead Agency and participating entities to procure similar services through other means. Contract performance begins upon execution of the agreement and expires after successful completion of testing, commissioning, and invoice submission. A one-year warranty covers all materials and workmanship, obligating the contractor to repair or replace any defective components at no cost to the Agency. Failure to do so may result in the Agency using funds to hire an alternative vendor and charging the original bidder. The solicitation, numbered DASIowa-005-RFB-2942-2027, is open to qualified bidders and does not guarantee exclusive award; the Agency retains full discretion in selecting contractors based on responsiveness, competitiveness, and conformance to technical requirements.

POSTED

DEADLINE

Mount Pleasant Correctional Facility - Building 20 Automated Valve Refit

Solicitation # 005-RFB-2942-2027

The Iowa Department of Administrative Services is seeking qualified contractors to perform welding services for the refit of Building 20 at the Mount Pleasant Correctional Facility to install new automated valves that will heat the MLO Building, which accommodates approximately 100 to 150 minimum-security incarcerated individuals. This project is part of broader efforts to enhance heating efficiency and operational reliability at the facility, which is a minimum-security prison emphasizing re-entry programs, cognitive-behavioral training, and community integration. Bids must be submitted by August 17, 2026, in response to solicitation number 005-RFB-2942-2027, with all work to be performed at the facility located at 1200 E Washington St., Mt Pleasant, IA 52641. The solicitation is open to qualified vendors with experience in industrial welding and mechanical system retrofits, and all proposals must be submitted through the Iowa Bid Opportunities portal. The primary point of contact for inquiries is Michael Bradbury, reachable at 515-823-9327 or michael.bradbury@das.iowa.gov. While the solicitation does not specify a set-aside program or NAICS code, it is issued by a State and Local Government Entity (SLED) under the Iowa Department of Administrative Services, based in Des Moines. The work is critical to ensuring safe and consistent climate control within a correctional environment, and bidders are expected to demonstrate compliance with all applicable safety, structural, and operational standards relevant to institutional infrastructure.

Department of Administrative Services

POSTED

DEADLINE

HVAC System InstallationThe contract titled HVAC System Installation outlines the scope for installing comprehensive heating, ventilation, and air conditioning systems, including all associated ductwork and control systems. This is a subcontract opportunity under NAICS code 238220, issued by Technical Services through its Florida office, with a response deadline of September 15, 2026. The work is expected to be performed in an unspecified location within Florida, and the contract does not designate a specific set-aside category or target organization type. The project portal link is provided for further access, though no point of contact details are included. All deliverables must meet the technical specifications for full HVAC system integration, ensuring operational efficiency and compliance with industry standards.

Technical Services

POSTED

DEADLINE

in about 1 month

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation requires the installation of comprehensive plumbing systems including water supply, drainage, and gas piping. It is structured as a subcontract under NAICS code 238220 and was posted on August 1, 2026, with a response deadline of September 15, 2026, at 6:00 PM. The work is being procured by Technical Services through its Florida office, though specific city or zip details for the place of performance or agency address are not provided. The solicitation does not indicate a set-aside type or designated organization type, and there is no point of contact information listed. Interested parties must submit proposals through the provided procurement portal link before the stated deadline to be considered for award.

Technical Services

POSTED

DEADLINE

in about 1 month

More opportunities from Alabama → Procurement

Same awarding agency

Sheathing and Wood Stud Replacement (Ancillary Repair Work)The contract involves the removal and replacement of deteriorated roof sheathing along with structural wood studs measuring 2 inches by 6 inches by 14 feet, requiring full labor and material provision in compliance with preservation and framing standards. This ancillary repair work is classified as a subcontract under NAICS code 238190 and is being managed by the Alabama office of the Procurement agency. The solicitation was posted on July 30, 2026, with a deadline for responses set for August 27, 2026, at 7:00 PM. The work is scheduled to take place in an unspecified location within Alabama, and the contract does not include details on set-asides or point of contact information. All activities must adhere strictly to structural integrity and preservation protocols to ensure long-term durability and safety of the roof system.

Other Foundation, Structure, and Building Exterior Contractors

POSTED

DEADLINE

Anchorage and Structural Metal Component SupplyThe contract seeks the supply of engineered anchorage systems and structural metal components, including clips, brackets, and fasteners, all specifically designed to meet wind load resistance requirements and ensure secure roof attachment. These components are critical for structural integrity in high-wind environments and must be manufactured to rigorous engineering standards to guarantee performance and durability under extreme weather conditions. The solicitation is categorized as a subcontract under NAICS code 332311, indicating a focus on fabricated metal product manufacturing, and is open for responses until August 27, 2026. The work is associated with the Alabama procurement office, though specific performance location details are not provided. All submissions must align with the technical specifications for wind load resistance and secure mounting, with no set-aside provisions identified and no designated point of contact listed for inquiries.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Metal Roof Panel and Flashing Fabrication (Supply-Only)The contract covers the off-site fabrication and delivery of custom metal roof panels and flashings, manufactured to meet detailed project specifications and delivered in a packaged, installation-ready condition. This is a supply-only subcontract where the vendor is responsible for producing all components with precise dimensional, material, and finish requirements, ensuring compatibility with the intended roofing system without providing installation services or on-site support. The work must align with technical standards and quality expectations established by the project, with all items properly labeled, secured, and shipped according to agreed logistics protocols. The solicitation was posted on July 30, 2026, with a response deadline of August 27, 2026, and is classified under NAICS code 332312 for metal building component manufacturing. The procurement is managed by the Alabama agency under Procurement, though no specific office location or point of contact is provided. The place of performance and recipient details are unspecified, indicating that delivery is expected to a project site determined by the buyer, with the vendor handling all logistics to finalize shipment. The contract type is explicitly a subcontract, suggesting the successful bidder will fulfill part of a larger construction effort.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Metal Roofing System Supply and InstallationThe contract entails the full supply, fabrication, and installation of a metal roofing system encompassing panels, flashings, and anchorage components, with seamless integration into existing construction elements. All work must comply with applicable structural and environmental standards to ensure durability, safety, and performance under local conditions. The scope requires complete project execution from material sourcing through final installation, demanding precision in alignment, weatherproofing, and adherence to industry best practices for metal roofing systems. This is a subcontract under NAICS code 238160, with a response deadline of August 27, 2026, and a posted date of July 30, 2026. The procurement is managed by the Alabama agency under the Procurement office, with performance expected to occur in Orange Beach, Alabama. The contract does not specify a set-aside type, and bidder eligibility is not restricted by organizational classification. All proposals must meet technical and regulatory requirements without reliance on supplemental documentation, and submissions must be complete and compliant with the solicitation parameters as outlined in the official procurement portal.

Roofing Contractors

POSTED

DEADLINE

Renovation for Orange Beach Medical Center South

Solicitation # 2026-0827

The City of Orange Beach is soliciting sealed electronic bids for the renovation of Orange Beach Medical Center South through its eProcurement Portal, with submissions due by 2:00 PM CST on Thursday, August 27, 2026. The solicitation number is 2026-0827, and all bids must be submitted electronically via the designated portal. The project is categorized under a state, local, or educational government entity and is being managed by the City’s Procurement office in Alabama. The place of performance is located in Orange Beach, Alabama, and all work is expected to be carried out at the medical center site. Primary point of contact for project-related inquiries is McCollough Architecture, with the Project Manager reachable at 251-968-7222 or admin@mcarcht.com, while the Purchasing Agent for procurement matters is Taelor Robinson of the City of Orange Beach, contactable at 251-981-0168 or trobinson@orangebeachal.gov. The solicitation was posted on July 30, 2026, and bidders are expected to review all project specifications and requirements thoroughly prior to submission. No set-aside designation or NAICS code has been specified, and submissions outside the portal or after the deadline will not be accepted.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Material Supply – Concrete and AsphaltThe contract entails the supply of ready-mix concrete and asphalt for foundational work, slabs, and site paving operations, with all materials required to comply with Department of Transportation specifications and be delivered within the state of Florida. The scope focuses on ensuring material quality and consistency to meet rigorous infrastructure standards, though the specific project locations or volumes are not detailed in the provided data. The solicitation is categorized as a subcontract under NAICS code 327320, which corresponds to concrete product manufacturing, and was posted on July 22, 2026, with a response deadline of August 12, 2026, at 6:00 PM. The contracting entity is listed as Procurement under the Alabama agency, though no physical office address or point of contact information is provided. The procurement is not designated with a specific set-aside classification, and bidders must ensure full alignment with DOT requirements and timely delivery schedules to successfully meet contractual obligations.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Construction Management Support ServicesThe contract is for specialized construction management support services under the CMAR delivery method, focusing on critical project functions including project scheduling, cost estimating, BIM coordination, and public communication planning. These services are intended to provide expert assistance in ensuring efficient project execution, accurate budget adherence, and seamless integration of digital modeling tools throughout the construction lifecycle, while maintaining transparent and effective engagement with the public. The opportunity is posted as a subcontract under NAICS code 541330, with a response deadline of August 12, 2026, and was made available on July 22, 2026. It is administered by the Alabama agency under the Procurement designation, though specific location details such as city, state, or office address are not provided. The solicitation is open for proposals via an online portal, and interested parties should submit their responses before the stated deadline to be considered for award.

Engineering Services

POSTED

DEADLINE

Site Work and UtilitiesThe contract encompasses site work and utilities for a project under the NAICS code 237310, focusing on grading, excavation, stormwater management, and the installation of essential site utilities including water, sewer, gas, and electrical service drops. All work is to be performed in Alabama under a subcontract arrangement, with the solicitation posted on July 22, 2026, and a response deadline of August 12, 2026, at 6:00 PM. The procurement is managed by the Alabama agency under the Procurement department, though specific location details such as city, state, or zip code for performance or contact are not provided, and no set-aside designation is specified. Proposals must be submitted through the official portal linked for the Montgomery, Alabama project.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Sustainability and Energy Efficiency FeaturesThe contract encompasses the implementation of green building features designed to enhance energy efficiency and environmental sustainability, including the installation of energy-efficient systems, advanced controls, high-performance insulation, and other measures aligned with LEED or comparable sustainability certification standards. The work is structured as a subcontract under NAICS code 541620, indicating a focus on architectural and engineering services tied to environmental planning and design, with an emphasis on delivering measurable improvements in building performance and resource conservation. The opportunity was posted on July 22, 2026, with a response deadline of August 12, 2026, and is associated with the agency name Procurement and the organizational location of Alabama, though specific city or postal details for performance or contact are not provided. The contract does not specify a set-aside designation, suggesting it is open to general competition, and interested parties must respond through the designated online portal prior to the deadline to be considered for award.

Environmental Consulting Services

POSTED

DEADLINE

Fire Alarm and Life Safety SystemsThe contract calls for the design, supply, and installation of comprehensive fire alarm and life safety systems, encompassing fire detectors, manual pull stations, notification appliances, and full integration with existing building systems to ensure cohesive emergency response capabilities. Scope includes all necessary equipment, labor, and coordination to meet applicable life safety codes and standards, with performance expected to align with operational requirements of the facility in Alabama. The work is structured as a subcontract under the NAICS code 238210 for electrical and other construction installations, and must be completed by the response deadline of August 12, 2026, at 6:00 PM. All activities are to be carried out at the designated project location within Alabama, and the procuring entity is the Alabama office under the Procurement agency, with no set-aside provisions specified.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Electrical Systems InstallationThe contract titled Electrical Systems Installation encompasses the full scope of electrical infrastructure work for a building and its surrounding site, including the installation of electrical distribution systems, lighting systems, power outlets, wiring, and electrical panels. This subcontract is solicited under NAICS code 238210, which classifies it under Electrical and Other Construction Activities, and is open for bid with a response deadline of August 12, 2026, at 6:00 PM. The work is to be performed in Alabama under the oversight of the Procurement agency, though specific city or zip code details for the place of performance are not provided. Bidders must submit proposals by the stated deadline, and while the contract type is designated as a subcontract, no set-aside provisions or organizational type restrictions are specified. Further details and submission guidance can be accessed via the provided online portal link.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Thermoplastic Marking Material (Granular)

Solicitation # 2026-RFQ-050

The City of Montgomery is soliciting alkyd-based thermoplastic pavement marking materials in granular form, strictly compliant with the 2026 ALDOT Section 856 specifications, for both white and yellow Class 2 thermoplastic. All materials must be supplied by vendors enrolled in the ALDOT-420 Acceptance Program for Traffic Marking Materials and must be packaged in 50-pound meltable bags designed for use with premelter equipment, ensuring clean melting without discoloration. Each pallet must contain exactly 40 bags, and all pricing will be quoted per ton. The solicitation,编号 2026-RFQ-050, was posted on July 22, 2026, with responses due by August 12, 2026, and the Place of Performance is Montgomery, Alabama. Evaluation of proposals will follow a best-value trade-off process, prioritizing company background, relevant construction experience, and personnel expertise equally at 20 points each, followed by methodology, project management approach, and other factors totaling 100 points. While no formal FAR clauses or federal accounting codes are referenced, the procurement enforces compliance with state regulations and requires submission of supporting documentation including an introduction letter, license, insurance, and certifications. The City will accept electronic submissions only via its OpenGov portal, and all contractors must meet contractual obligations including adherence to safety standards such as ANSI and OSHA requirements, even though specific packaging, labeling, or preservation standards are not mandated. Payment terms, invoicing systems, and contract administration details like COTR or COR assignees are not specified, and the contract value remains unquantified.

POSTED

DEADLINE