Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

HVAC Mechanical Systems

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract covers the installation of heating, ventilation, and air conditioning systems along with associated ductwork and rooftop units under a subcontract tied to the Department of Defense through the Defense Logistics Agency. The work is classified under NAICS code 238220, indicating it pertains to HVAC mechanical systems installation within federal infrastructure projects. The contract was posted on August 1, 2026, and is linked to a larger procurement effort identified by the contract number SPE7M117D0001 and delivery order SPE7LX26F86D0. Performance location details are unspecified, but the scope implies on-site execution at DOD facilities. No set-aside provisions or small business preferences are indicated, and the contract remains open for execution by the prime contractor’s designated subcontractor without further public bid details.

General Info

HVAC installation contract under DOD via DLA, linked to SPE7M117D0001 and SPE7LX26F86D0, no set-asides.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 1

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of heating, ventilation, and air conditioning systems including ductwork and rooftop units.

Similar Contracts

Same NAICS industry code

Plumbing Repairs, Phoenix Rearing Facility

Solicitation # 12639526Q0197

The Phoenix Rearing Facility Plumbing Repairs solicitation, identified by number 12639526Q0197, is a fixed-price construction contract issued by the U.S. Department of Agriculture through its Minneapolis office, with performance located at the 69,000-square-foot facility in Phoenix, Arizona. The facility supports the Sterile Insect Technique program aimed at controlling navel orange worm populations impacting U.S. agriculture. This procurement requires comprehensive plumbing system repairs and upgrades to address chronic issues including backed-up sinks and urinals in both men’s restrooms, recurring clogs in maintenance and utility drains, and persistent odors in the QC clean lab area. The work scope includes removal and replacement of waste piping and vents with associated concrete repairs, remodeling the south restroom and showers to meet ABA compliance standards, performing minor fixture replacements and finish patching in the north restroom, and engaging a government-approved third-party inspection agency to verify all systems. The contract is set aside entirely for small businesses with a NAICS code of 238220 and a size standard of $19 million, with the offeror required to submit a lump-sum price that reflects a realistic understanding of the work and consistent technical approach. The contract imposes strict compliance with federal regulations including the Buy American Act, Construction Wage Rate Requirements under the Davis-Bacon Act, and sustainable product standards, with all materials required to be delivered in unopened manufacturer packaging with intact labels conforming to NFPA 70, ANSI A137.1, and ASME A13.1. Performance must commence within 10 days of receiving the Notice to Proceed and is governed by an 180-day period of performance. The contractor is mandated to provide performance and payment bonds, submit a site-specific safety plan, designate key personnel including a superintendent, quality control officer, and safety officer, and maintain detailed quality records including hydrostatic and welding inspections. Progress payments are available monthly and must be supported by itemized requests, subcontractor payment listings, lien waivers, and certified documentation, with payments processed within 14 days of a proper submission. Award will go to the responsible small business offering the highest technical rating with a fair and reasonable price, with no trade-offs permitted between cost and technical merit. All work must align with the 2010 ADA Standards for Accessible Design, and the contractor must certify compliance with federal anti-discrimination laws and environmental requirements, while also adhering to whistleblower protections and prohibitions against

Mrpbs Minneapolis Mn

POSTED

about 6 hours ago

DEADLINE

Fire suppression system installation

Solicitation # 12639526Q0210

A fire suppression system installation is required at Building 6418 on Moore Air Base in Edinburg, Texas, following a recent fire that exposed the absence of any fire protection in the structure, which was built in the early 1980s. The project is a turnkey effort requiring the full design, installation, permitting, and commissioning of a new automatic sprinkler system including underground and overhead piping, canopy protection, flex drops for sprinkler heads centered in ceiling tiles, and a riser room with an above-ground backflow preventer, PIV, tap, and testing certification. All work must comply with NFPA standards, State of Texas environmental regulations, and local ordinances, using only new and unused materials. The system must be designed to allow for future integration with a fire alarm panel, though no active monitoring is required at this time. The solicitation is a combined synopsis and request for quotations issued under FAR Part 12 as a commercial items acquisition, with a total small business set-aside under NAICS code 238220 and a size standard of $19 million. Offers must be submitted electronically by 12:00 p.m. CT on August 6, 2026, to james.g.roloff@usda.gov with the solicitation number included in the subject line. A site visit is scheduled for July 23, 2026, and attendees must register in advance and present a valid driver's license or state ID for facility access. Award will be made using the Lowest Price Technically Acceptable (LPTA) method under FAR 12.203, where only the lowest-priced offer will be evaluated for technical acceptability unless it fails to meet requirements, in which case the process continues sequentially down the price list. The quote must include a complete breakdown of all components making up the lump-sum price, and the government will conduct a price realism analysis to ensure the submission is realistic, reflects a clear understanding of requirements, and is consistent with the technical proposal. Submissions deemed unreasonably low or high may be rejected for incorporating excessive risk. Technical acceptability is rated as acceptable or unacceptable based on the offeror’s demonstrated ability to meet all requirements, including relevant experience with fire sprinkler systems of similar scope. Past performance will be evaluated as acceptable, neutral, or unacceptable, with no history resulting in a neutral rating. All contractors must be registered in SAM, provide payment and performance bonds under FAR 52.

Mrpbs Minneapolis Mn

POSTED

about 6 hours ago

DEADLINE

Emergency On-Call Repair and ResponseThe contract titled Emergency On-Call Repair and Response requires providers to deliver continuous 24/7 emergency response services for failures in fire alarm, sprinkler, or suppression systems across the State of Rhode Island. Contractors must initiate repairs within 48 hours of being notified of a system malfunction to ensure compliance with life safety standards and regulatory requirements. The work is classified under NAICS code 238220, indicating it falls under the plumbing, heating, and air-conditioning contracting category, and is structured as a subcontract opportunity. Responses are due by August 26, 2026, with the solicitation posted on August 1, 2026, and all performance expected to occur within Rhode Island. All parties must be prepared to respond at any time, regardless of day or night, and deliver timely, qualified service to maintain public safety and system integrity.

State of Rhode Island

POSTED

about 21 hours ago

DEADLINE

Special Hazard Suppression System MaintenanceThe contract involves the annual inspection and testing of specialized fire suppression systems, including Inergen, FM-200, and kitchen hood systems, with required cylinder checks and maintenance performed in full compliance with UL standards. The work must be carried out by a qualified contractor capable of ensuring the systems remain operational and meet regulatory safety requirements throughout the year. This is a subcontract under the State of Rhode Island, categorized under NAICS code 238220, and is open for bids with a submission deadline of August 26, 2026. The opportunity was posted on August 1, 2026, and all performance is expected to align with state safety protocols, though specific locations for service are not detailed. Interested parties must submit proposals through the official Rhode Island Department of Public Works bidding portal before the stated deadline.

State of Rhode Island

POSTED

about 21 hours ago

DEADLINE

Sprinkler System Inspection and Flow TestingThe contract requires the performance of annual and semi-annual inspections, testing, and maintenance for wet, dry, and pre-action sprinkler systems, ensuring full compliance with NFPA 13 and NFPA 25 standards. This includes detailed valve checks and fire hydrant flow testing to verify system readiness and performance under operational conditions. All work must be conducted with precision to maintain code compliance and ensure life safety systems remain functional and reliable throughout the contract period. The opportunity is classified as a subcontract under NAICS code 238220 and is issued by the State of Rhode Island through its Rhode Island agency. The solicitation was posted on August 1, 2026, with a response deadline of August 26, 2026, at 5:30 PM. While specific location details and point of contact information are not provided, the work is expected to occur within the jurisdiction of the State of Rhode Island. Interested parties must submit proposals by the stated deadline to be considered for award.

State of Rhode Island

POSTED

about 21 hours ago

DEADLINE

Fire Alarm System Testing and MaintenanceThe contract entails performing required inspection, testing, and maintenance services for fire alarm systems across state facilities in Rhode Island, with tasks scheduled on a quarterly, semi-annual, and annual basis. Services include comprehensive testing of individual devices, evaluation of control panels, and submission of UTR reports in full compliance with NFPA 72 standards. The work must be executed with precision to ensure system reliability and regulatory adherence throughout all designated state locations. The contract is classified as a subcontract under NAICS code 238220 and is being procured by the State of Rhode Island through its Department of Administrative Services. Bidders must submit responses by August 26, 2026, at 5:30 PM, following the posting date of August 1, 2026, with all details accessible via the official state bidding portal.

State of Rhode Island

POSTED

about 21 hours ago

DEADLINE

Fiber Optic Cable Installation and SplicingThe contract awards the installation, pulling, and fusion splicing of fiber optic cable to establish a dedicated backbone communications network connecting field devices to the Traffic Management Center. This work supports the Intelligent Transportation Systems infrastructure and requires precise technical execution to ensure reliable, high-capacity data transmission. The scope encompasses all labor, materials, and methodologies necessary to deploy and terminatе fiber optic links in compliance with industry standards for performance and durability. The subcontract is issued under the NAICS code 238220 for Electrical and Other Wiring Installation Contractors and is managed by the Defense Logistics Agency within the Department of Defense. The contract was posted on August 1, 2026, with performance expected to occur at unspecified locations under the jurisdiction of the Department of Defense. All work must meet stringent operational requirements to support critical transportation control systems, and the subcontractor is responsible for full compliance with all technical, safety, and scheduling obligations without additional direction.

Defense Logistics Agency

POSTED

DEADLINE

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with a NAICS code of 238220 covering plumbing, heating, and air-conditioning contractors. It pertains to the installation of potable water, waste drainage, and gas piping systems within commercial or institutional buildings, requiring specialized expertise in mechanical systems compliance and building code adherence. The solicitation was posted on August 1, 2026, with a response deadline of August 24, 2026, and is managed by the ASC Commodities Division under the Department of Defense, though specific performance location and point of contact details are not provided. Contractors must submit proposals before the deadline to be considered for award under this set-aside, ensuring eligibility and compliance with small business certification requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Steam Piping System Rework and WeldingThe contract entails a complete rework of the steam piping system located in the basement of a correctional facility operated by the state of Iowa. The scope includes the full removal of existing piping, fabrication and installation of new fittings, precision welding, rigorous pressure testing to ensure system integrity, and final reinstallation in accordance with safety and operational standards. All work must comply with industry best practices and must be executed without disrupting the facility’s essential operations, given the critical nature of the location. The project is classified under NAICS code 238220, indicating it falls under plumbing, heating, and air-conditioning contracting, and is issued as a subcontract opportunity with no set-aside provisions. Bids are due by August 17, 2026, and interested parties must submit through the specified online portal prior to the deadline.

POSTED

DEADLINE

Mount Pleasant Correctional Facility - Building 20 Automated Valve Refit

Solicitation # 005-RFB-2942-2027

The Iowa Department of Administrative Services is soliciting competitive bids for welding and piping services to refit Building 20 at the Mount Pleasant Correctional Facility with a new automated steam valve system to support heating in the MLO Building. The contract requires the full scope of work including demolition of existing steam pressure-reducing valves and piping, fabrication and installation of a new 4-inch steam header with six 2-inch threaded outlets, installation of new actuated valves with isolation and union fittings, routing of a 4-inch relief line to the building exterior, tie-in of the water heater to both high- and low-pressure steam systems, and reintegration of existing steam backfeed piping. All work must comply with applicable codes, involve certified welding, and include proper structural supports, wall penetrations with fire and weather sealing, and full testing and commissioning. The contractor must provide as-built drawings, manufacturer documentation, operation and maintenance manuals, and a commissioned test report. The work is expected to commence in mid-to-late August 2026 with substantial completion by September 30, 2026, and includes a mandatory site visit on August 11, 2026. Bids must be submitted by August 17, 2026, through the designated online portal, with bidders required to certify and resubmit any amendments received prior to the deadline. The contract will be non-exclusive, allowing the Lead Agency and participating entities to procure similar services through other means. Contract performance begins upon execution of the agreement and expires after successful completion of testing, commissioning, and invoice submission. A one-year warranty covers all materials and workmanship, obligating the contractor to repair or replace any defective components at no cost to the Agency. Failure to do so may result in the Agency using funds to hire an alternative vendor and charging the original bidder. The solicitation, numbered DASIowa-005-RFB-2942-2027, is open to qualified bidders and does not guarantee exclusive award; the Agency retains full discretion in selecting contractors based on responsiveness, competitiveness, and conformance to technical requirements.

POSTED

DEADLINE

Mount Pleasant Correctional Facility - Building 20 Automated Valve Refit

Solicitation # 005-RFB-2942-2027

The Iowa Department of Administrative Services is seeking qualified contractors to perform welding services for the refit of Building 20 at the Mount Pleasant Correctional Facility to install new automated valves that will heat the MLO Building, which accommodates approximately 100 to 150 minimum-security incarcerated individuals. This project is part of broader efforts to enhance heating efficiency and operational reliability at the facility, which is a minimum-security prison emphasizing re-entry programs, cognitive-behavioral training, and community integration. Bids must be submitted by August 17, 2026, in response to solicitation number 005-RFB-2942-2027, with all work to be performed at the facility located at 1200 E Washington St., Mt Pleasant, IA 52641. The solicitation is open to qualified vendors with experience in industrial welding and mechanical system retrofits, and all proposals must be submitted through the Iowa Bid Opportunities portal. The primary point of contact for inquiries is Michael Bradbury, reachable at 515-823-9327 or michael.bradbury@das.iowa.gov. While the solicitation does not specify a set-aside program or NAICS code, it is issued by a State and Local Government Entity (SLED) under the Iowa Department of Administrative Services, based in Des Moines. The work is critical to ensuring safe and consistent climate control within a correctional environment, and bidders are expected to demonstrate compliance with all applicable safety, structural, and operational standards relevant to institutional infrastructure.

Department of Administrative Services

POSTED

DEADLINE

HVAC System InstallationThe contract titled HVAC System Installation outlines the scope for installing comprehensive heating, ventilation, and air conditioning systems, including all associated ductwork and control systems. This is a subcontract opportunity under NAICS code 238220, issued by Technical Services through its Florida office, with a response deadline of September 15, 2026. The work is expected to be performed in an unspecified location within Florida, and the contract does not designate a specific set-aside category or target organization type. The project portal link is provided for further access, though no point of contact details are included. All deliverables must meet the technical specifications for full HVAC system integration, ensuring operational efficiency and compliance with industry standards.

Technical Services

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

HOUSING, LATCH PAN A

Solicitation # SPE8E5-26-T-3746

The contract is for one unit of a Housing, Latch Pan Assembly identified by part number 5599908-19 and NSN 5411-01-375-3695, with a requirement for delivery within 20 days after award. The item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through an accredited third-party assessment organization, and packaging must adhere to DLA-specific guidelines. The supply is classified as covered defense information and is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. entities. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the technical data. The solicitation number is SPE8E5-26-T-3746, issued on August 2, 2026, with responses due by August 13, 2026, under NAICS code 331315, and performance is designated for FPO with ZIP 96667. The primary point of contact is Don Trachtman, reachable via email and phone provided, and the contract is managed by the Defense Logistics Agency under the Department of Defense.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 1 hour ago

DEADLINE

NOZZLE, FIRE EQUIPME

Solicitation # SPE8E6-26-T-3955

The contract pertains to the procurement of a single nozzle for fire equipment, identified by NSN 4210-01-658-7880 and part number 05000542, with a required delivery of five days from the date of award. The item is to be shipped FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master list of technical and quality requirements, prioritizing those referenced by R or I numbers over general standards like ASTM D3951. If the item is non-hazardous per Fed-Std-313, it must be commercially packaged in accordance with ASTM D3951 but fully aligned with DLA’s superior specifications, including labeling and marking per MIL-STD-129 and palletization per RP001. Hazardous materials must meet TQ requirement IP025. The unit of issue is each, and one unit is ordered under purchase request 7017689821. Delivery must be made via the fastest traceable means, explicitly prohibiting parcel post, and shipped to the designated DLA retail facility in Albany, Georgia. The original required delivery date is August 4, 2026, and the contract was solicited under SPE8E6-26-T-3955 with a response deadline of August 13, 2026. All technical and quality compliance is governed by the DLA Master List in effect at the time of award, and the contracting officer is John Lieb of the Defense Logistics Agency.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

PRIMER, SEALING COMP

Solicitation # SPE8ES-26-T-2485

The contract specifies the procurement of one unit of PRIMER, SEALING COMP with NSN 8030-01-672-0817 under solicitation SPE8ES-26-T-2485, issued by the Defense Logistics Agency. Delivery is required within 20 days to a designated military installation in Vallejo, California, with FOB destination terms and zero variance allowed in quantity. The item is classified as a TYPE I (CODE M) shelf-life item with a non-extendable 24-month shelf life, and all packaging, marking, and shipping must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Hazardous materials protocols must be followed per IP025, and shipment must be traceable, excluding parcel post. The item is subject to the Defense Federal Acquisition Regulation Supplement, including requirements for hazardous communication, government information handling, and technical quality standards referenced through R-numbers. Packaging and storage must maintain temperatures between -10°F and 110°F, with specific packaging methods and codes applied. The supplier must be the Industries for the Blind & Visually Impaired, identified by P/N 7XM97, and all documentation must reflect revision standards including MIL-STD-129R, MIL-STD-147F, and FED-STD-313F. The item is for government use only, with the designated point of contact and delivery instructions clearly outlined, including the freight address and mandatory marking code 32 for shelf-life compliance.

Adhesive Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E7-26-T-3451

The contract pertains to the procurement of 10 units of LIGHT,DOME with NSN 6220-01-706-9275 under solicitation SPE8E7-26-T-3451, issued by the Defense Logistics Agency. Delivery is required within 20 days of award, with FOB origin terms, and inspection and acceptance occur at the destination. The item must be packaged in full compliance with DLA packaging requirements, specifically RP001, and labeled per MIL-STD-129. If not classified as hazardous under FED-STD-313, it must be commercially packaged according to ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over any commercial standards. The packaging must adhere to specified Unit of Issue and Quantity per Unit Pack, with palletization following DLA guidelines. The delivery destination is FB5682 at Cargo Movement Element Building 1029 in Aviano, Italy, with transportation governed by DLAD procedural notes C19 and C20. The contract includes strict quantity variance limits of zero percent, meaning no over or under shipment is permitted. All documentation, including technical and quality requirements referenced by R or I numbers, is governed by the DLA Master List, with revision control tied to the solicitation issue date. The item is identified by multiple revision levels of technical data packages referencing drawing numbers 78286 and 78550-02801, and must be marked and traceable as specified. The point of contact is Kelly Mitchell, and the order is tied to project ACV TP 3 with government-only identifiers for tracking and disposition.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

BATTERY, NONRECHARGEABL

Solicitation # SPE7L7-26-T-4530

The contract specifies the procurement of a single non-rechargeable battery with NSN 6135-01-592-8698 and part number 11141-000100, supplied by Physio Control Corp, under solicitation SPE7L7-26-T-4530. The battery must meet a Type I shelf life of 60 months with no extension permitted, and it is subject to strict packaging, marking, and shipping requirements per MIL-STD-2073-1E and MIL-STD-129, including specialized packaging codes and hazardous material handling protocols. The item is classified as commercial off-the-shelf with adequate catalog data available, and mercury or mercury compounds are strictly prohibited except in functional components such as batteries, fluorescent lamps, or sensors as defined by NAVSEA, requiring secondary containment for mercury-containing portable devices. Sampling and quality verification are governed by MIL-STD-1916 or equivalent zero-based plans with acceptance criteria of zero non-conformances unless otherwise specified, and critical attributes are assigned verification levels or AQLs accordingly. Delivery is required FOB destination within five days of contract award, with inspection and acceptance also occurring at the destination. The sole delivery point is Fort Bragg, North Carolina, and shipments must be traceable via expedited means, excluding parcel post. All packaging and marking must align with DLA’s standardized requirements, and the contract enforces compliance with hazardous communication standards and the DLA Master List of Technical and Quality Requirements referenced via official online portals. The contract was posted on August 2, 2026, with a response deadline of August 13, 2026, and the original delivery date is July 24, 2026.

Battery Manufacturing

POSTED

about 1 hour ago

DEADLINE

HEATING BLANKET, ELE

Solicitation # SPE8E8-26-T-4934

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 1 hour ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-3954

Commercial Printing (except Screen and Books)

POSTED

about 1 hour ago

DEADLINE

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-T-4933

The contract specifies the procurement of a heating element identified by part number 100109774 and NSN 4520016854500, with a quantity of nine units to be delivered within five days of order placement. All items must be packaged and labeled in strict compliance with MIL-STD-129 and ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Packaging and palletization must adhere to DLA-specific procurement standards, and items must be shipped via the fastest traceable means, explicitly prohibiting parcel post. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The shipment is directed to Fort Eustis, Virginia, and must be marked with the specified military freight and manifest codes. The unit price is $9.00 per item, totaling $81.00, with no variance allowed in quantity. The contract is issued under solicitation SPE8E8-26-T-4933, with a required delivery date of July 29, 2026, and is governed by federal regulations under the Defense Logistics Agency, with technical and quality compliance monitored through referenced DLA master documents.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 1 hour ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-3948

POSTED

about 1 hour ago

DEADLINE

HUB, WHEEL, VEHICULAR

Solicitation # SPE7L7-26-T-4528

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 1 hour ago

DEADLINE

HEATING BLANKET, ELE

Solicitation # SPE8E8-26-T-4935

The contract pertains to the procurement of one heating blanket, electric, identified by NSN 4520-01-706-8039 and part number TW 025 000, under solicitation SPE8E8-26-T-4935, issued by the Defense Logistics Agency on behalf of the Department of Defense. Delivery is required within 20 days of contract award, with FOB origin terms, and inspection and acceptance occurring at the destination point. The quantity is fixed at one unit with zero variance allowed. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. Palletization must comply with DLA packaging requirements. The blanket must be shipped via traceable freight to the designated military facility at Camp Pendleton, California, and parcel post is explicitly prohibited. The delivery address is identified with a military freight code, and the required delivery date is July 14, 2026. The contract is governed by federal acquisition regulations and incorporates specific technical and quality standards identified by R and I numbers from the DLA Master List, ensuring compliance with defense-specific performance and security criteria. Additionally, covered defense information requirements may apply, and the item is to be marked with the appropriate government usage codes.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 1 hour ago

DEADLINE

STRAINER, WASTE DRAI

Solicitation # SPE8E8-26-T-4939

Plastics Plumbing Fixture Manufacturing

POSTED

about 1 hour ago

DEADLINE