This Combined Synopsis/Solicitation opportunity from Department Of Homeland Security was posted on August 29, 2019. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Hydraulic Alligator Shearing Machine

Closed

70US0919Q70090287Federal

Submission Closed09/05/2019, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # RFQ511741

Oak Ridge National Laboratory, managed by UT-Battelle for the Department of Energy, is soliciting firm fixed price quotations under RFQ511741 for a compact, high-speed machining system. The requirement specifies a Datron Neo milling machine or a domestic equivalent, featuring a 2kW 40,000rpm spindle, a 24-tool automatic changer, a maximum width of 32 inches, and an integrated touch probe. The scope of work includes the delivery of the fully assembled system to Oak Ridge, Tennessee, along with installation, startup assistance, and operator training. Award will be based on the lowest priced, technically acceptable proposal. The contract is subject to rigorous federal and institutional requirements, including Buy American Act compliance and NIST SP 800-171 cybersecurity standards. Deliveries must be performed by U.S. citizens or approved foreign nationals. Payment terms are Net 30 days via Electronic Funds Transfer, with invoicing processed through the Ariba network. Offerors must submit a firm fixed price quotation, a proposed delivery schedule, and completed abbreviated representations and certifications by October 29, 2026. Any exceptions to the terms and conditions must be explicitly detailed in the proposal or the offer may be deemed non-responsive.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Recuperator Press Modification Replacement

Solicitation # W911KF-25-S-C002-A0017

The Army Contracting Command-Anniston Army Depot is seeking innovative commercial solutions under solicitation W911KF-25-S-C002-A0017 to modify or replace a legacy 60-ton 4-cylinder hydraulic recuperator press located in Building 133. The required solution must serve as a restraining fixture capable of withstanding reaction loads of approximately 100,000 pounds when cores are pressurized to 250 psig. Key technical specifications include the ability to ramp loads from 0 to 20,000 lbs with a tolerance of +/- 25 lbs, reach a final pneumatic load of 250 psig with a tolerance of +/- 1 psig, and utilize a control system capable of storing at least 2,500 timestamped test reports. All equipment must adhere to commercial safety and manufacturing standards such as ISO, ANSI, UL, and CE. The government will utilize a merit-based evaluation focusing on technical and innovative merit and delivery and lifecycle sustainment, with price serving as a secondary factor to ensure fairness and funding availability. Critical compliance requirements include registration in the System for Award Maintenance and strict adherence to the Trade Agreements Act and DFARS 252.225-7001, requiring offerors to explicitly identify the country of origin for all equipment. The expected award is slated for FY27 with a performance period of 6 to 12 months. Written solutions are due by October 28, 2026, and must be submitted via email to the designated contracting officials.

POSTED

DEADLINE

WY AL Metel Lathe 16-18"The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the procurement of a new metal lathe with a size range of 16 to 18 inches. This acquisition is categorized under NAICS code 333517 and is intended for use at the Missouri Basin. The forecast was posted on October 22, 2026, and lists Jennalyn Kent as both the primary point of contact and the Small Business Specialist. Further details regarding the solicitation and specific requirements can be accessed through the Acquisition Gateway.

Bureau of Reclamation

POSTED

DEADLINE

Manufacture of Worm Shaft AssembliesThis subcontract involves the manufacture and supply of 17 Worm Shaft Assemblies, identified by NSN 1290010449857, for prime contractors supporting DLA Weapons Support Maritime Supply Chain contracts. The work requires the use of precision machining equipment to fabricate worm gears and shafts in strict accordance with TDP Rev A Gen 2 and Reference Drawing NR I6236 EI-010449857, while maintaining quality control standards specified in Reference QAP 19200 11729546. The project falls under NAICS code 333517 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 2, 2026, to fulfill the requirements of this Department of Defense procurement action.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0272

Solicitation SPE8E5-27-T-0272 is a fixed-price procurement issued by the Defense Logistics Agency for three tube expanders, specifically Cummins Inc. part number ST880 (NSN 3456-00-922-6699). This is a Foreign Military Sales requirement with a required delivery date of October 23, 2026, and a delivery timeline of 20 days after order. The items are to be delivered FOB Origin, with the freight forwarder identified as D.F. Young, Inc. in Pennsylvania and the final shipping destination as the NATO Support Agency NSPA in Luxembourg. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129, MIL-STD-2073-1E, and ASTM-D-3951, as well as DLA packaging requirement RP001. It incorporates various FAR and DFARS clauses covering the Buy American Act, safeguarding covered defense information, and the use of the Wide Area WorkFlow system for electronic invoicing. This acquisition is not a small business set-aside and falls under NAICS code 333517. Technical and quality requirements are governed by the DLA Master List, and contractors must be registered via the Account Management and Provisioning System to access the Vendor Shipment Module.

Defense Logistics Agency

POSTED

DEADLINE

CDCR-DRP DESKTOP MILL AND DESKTOP LATHE

Solicitation # 10846575-1

The California Department of Corrections and Rehabilitation, Division of Rehabilitative Programs, is soliciting quotes for the acquisition of ten Desktop CNC 3-Axis Mills and eight Desktop CNC Lathes. This equipment is designated for the Career Technical Education Manufacturing, Design and Engineering Program serving incarcerated individuals at the Central California Womens Facility and the Correctional Institution for Women. The contractor is responsible for providing new, latest-model equipment, installation on locking mobile and stationary toolboxes, and comprehensive professional services. These services include eight hours of initial onsite operational training per machine and annual refresher training for up to five instructors per institution for a period of five years. Additionally, the contractor must provide a five-year service contract and a five-year preventive maintenance plan from the date of installation. The procurement follows a Value-Effective award methodology, with the contract awarded to the bidder achieving the highest total weighted score based on technical requirements (60 percent), the deliverables table (30 percent), and cost (10 percent). Bidders must submit their responses in two separate emails by November 3, 2026, consisting of an administrative and technical proposal and a separate cost proposal. Key compliance requirements include F.O.B. Destination shipping, mandatory GenAI usage disclosures, and certifications regarding California civil rights laws and postconsumer recycled content. Proposals that respond with no to any mandatory technical or deliverable requirement will be deemed non-responsive and disqualified.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

CNC Lathe Equipment SupplyThis subcontract agreement concerns the supply of CNC Lathe equipment for prime contractors working on projects for the California Department of Corrections and Rehabilitation. The scope of work involves delivering hardware that adheres to specific technical requirements to ensure full compatibility with Haas ST-10 and ST-25Y lathes. All provided equipment must strictly comply with the security and safety standards mandated by the agency. The contract is categorized under NAICS code 333517, with a response deadline set for November 3, 2026.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

CNC Mill Equipment SupplyThis subcontract for CNC Mill Equipment Supply involves the provision of Desktop CNC Mill 3 Axis hardware for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The equipment must strictly adhere to the technical specifications outlined in Exhibit A-1 to ensure full compatibility with Haas VF-1, VF-2 SS, and UMC-750 SS mills. Beyond technical compatibility, all delivered hardware must comply with the rigorous security and safety requirements mandated by the CDCR. The procurement process is categorized under NAICS code 333517, with a response deadline set for November 3, 2026.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Supply of Machine Reamers (NSN 3455-00-812-5214)This subcontract involves the supply of 83 machine reamers, identified by NSN 3455-00-812-5214, for prime contractors delivering to the Department of Defense DDSP New Cumberland Facility. The contractor is responsible for manufacturing or sourcing reamers that strictly adhere to ANSI standard B94.2-95 for dimensions and tolerances. Quality assurance must be performed in accordance with MIL-STD-1916 or ASQ H1331, with packaging and marking requirements following RP001 and MIL-STD-2073-1E. The contract mandates full compliance with the Berry Amendment and the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 2, 2026, for this requirement categorized under NAICS code 333517.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Custom Tooling for Aircraft Valve ProductionThis subcontract involves the design and fabrication of specialized production tooling for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the engineering and manufacture of jigs, fixtures, or molds specifically tailored to NSN 2915-01-454-3062 specifications. Production must be carried out using CNC machining or EDM processes, with the final completed tooling set delivered directly to the manufacturer. The project, titled Custom Tooling for Aircraft Valve Production, falls under NAICS code 333517 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 20, 2026, with a response deadline set for October 28, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0268

Solicitation SPE8E5-27-T-0268 is for the procurement of 83 units of a machine reamer, identified by NSN 3455-00-812-5214. The items must adhere to ANSI standard B94.2-95 for dimensions and tolerances. Delivery is required within 160 days, with the shipping point designated as FOB Origin and the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-2073-1E, specifically requiring the cushioning of sharp edges and the use of special marking code 05 for delicate instruments. Quality assurance will be conducted using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Compliance with the Berry Amendment, Buy American Act, and DFARS domestic material restrictions is required. Payment processing must be handled through the Wide Area WorkFlow system. This is not a small business set-aside, though price evaluation preferences are available for certified HUBZone small businesses.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Machine Bolts (P/N AN3-21A)This subcontract involves the manufacture or procurement of seven specialized machine bolts, part number AN3-21A, to support prime contractors fulfilling DLA supply contracts. The items must adhere to current part standards and meet strict regulatory requirements, including identification marking per MIL-STD-130N and sampling protocols according to MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129 standards, and government source inspection is mandatory for all critical items. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract requires final delivery to DLA Distribution Cherry Point. The procurement falls under NAICS code 333517, with a response deadline set for October 27, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days

General Info

Agency

Department Of Homeland Security → Fletc Glynco Procurement Office

Contract Value

$30,397.5

NAICS

333517 - Machine Tool Manufacturing

Place of Performance

LAUREL, MD, USA

Set-Aside

SBA

Awardee

SMART VISION BUILDING MATERIALS TRADING LLC

Award Issued Date

09/17/2019, 12:00:00 AM UTC

Documents

70US0919Q70090287_-_Alligator_Shearing_Machine.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedAug 29

Combined Synopsis

Response DeadlineSep 5

Deadline has passed

Submission Closed

09/05/2019, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Fletc Glynco Procurement Office

Contacts1 person available

OfficeBrunswick, GA, 31524, USA

Organization / AgencyDepartment Of Homeland Security → Fletc Glynco Procurement Office

Office AddressBrunswick, GA, 31524, USA

Contacts

Sylvia Perine-FontenoContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

The United States Secret Service (USSS) has a requirement for a Hydraulic Alligator Shearing Machine that is outlined in the attached Statement of Requirement (SOR).