This Solicitation opportunity from Government of Canada was posted on May 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Hydraulic Cylinder Services

Closed

BCRFP_19858International

Submission Closed07/13/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Lufkin Generator ServicesThe Texas Department of Public Safety is soliciting bids for generator services at 2809 S. John Reddit Dr. in Lufkin, Texas, under solicitation number 26R0024565. This opportunity is open to qualified vendors capable of providing comprehensive generator maintenance, repair, and related services at the specified location. The solicitation was posted on July 25, 2026, and responses are due by 11:00 p.m. CT on August 14, 2026. There is no specific set-aside classification indicated, and the NAICS code has not been provided. The contract falls under the state, local, and education (SLED) category, managed by the Texas DPS office. Ruben Reyes is the primary point of contact for inquiries, reachable at 512-424-5137 or ruben.reyes@dps.texas.gov. All necessary details and submission guidelines can be accessed through the official Texas SmartBuy portal link provided.

Department of Public Safety

POSTED

DEADLINE

Maintenance and Repairs for Commercial Laundry Equipment at the Mexia State Supported Living Center.The Texas Health and Human Services Commission is soliciting competitive bids to secure services for the maintenance and repair of commercial laundry equipment at the Mexia State Supported Living Center located at 540 Chapel Drive in Mexia, Texas. The solicitation, numbered HHS0017693, was posted on July 24, 2026, with a response deadline of August 14, 2026, at 4:30 PM Central Time. This procurement is managed by the Procurement and Contracting Services division of the agency and is intended to establish one or more contracts to ensure the ongoing operational reliability of laundry systems critical to the center’s daily functions. The work involves comprehensive servicing, troubleshooting, and repair of industrial-grade laundry machines and related infrastructure to maintain health, hygiene, and compliance standards within the facility. The contract will be awarded to qualified vendors able to demonstrate experience in commercial laundry equipment maintenance, response capabilities, and adherence to state facility requirements. Proposals must be submitted through the Texas SmartBuy portal, and all inquiries should be directed to David Martinez, the primary point of contact, via email at david.martinez01@hhs.texas.gov or phone at 512-406-2597. The opportunity is open to eligible businesses under the state and local government (SLED) category, with no set-aside designation specified, and the place of performance is exclusively located in Mexia, Texas. Bidders are expected to provide detailed service plans, pricing structures, and proof of technical competency to meet the operational demands of a state-supported living center.

Health and Human Services Commission

POSTED

DEADLINE

Small, Local, and DBE/MBE/WBE Supplier ParticipationHenry County Board of Commissioners is inviting certified small, disadvantaged, minority-, women-, and veteran-owned businesses to serve as subcontractors or suppliers in support of generator maintenance services under a subcontract opportunity. The solicitation is open to businesses certified under relevant disadvantaged business enterprise programs and aims to foster local economic participation through targeted subcontracting roles. The NAICS code 811310 specifies the scope of work centered on industrial and commercial equipment repair and maintenance, with performance expected to occur within Georgia. The posting date is July 24, 2026, and responses must be submitted by August 25, 2026, at 8:00 PM Eastern Time. While no specific set-aside designation is listed, the opportunity explicitly encourages participation from underrepresented business owners. Interested parties should access the full solicitation details via the provided state portal link before the deadline.

Henry County Board of Commissioners

POSTED

DEADLINE

Generator Inspection and Maintenance ServicesHenry County Board of Commissioners is seeking a subcontractor to conduct biannual inspections and preventive maintenance on 31 generator units located across various county facilities. The generators include both diesel and natural gas-powered models, each with specific technical ratings that must be adhered to during servicing. The work requires qualified personnel capable of performing comprehensive maintenance procedures to ensure operational reliability and safety standards are consistently met. All tasks must be completed on a scheduled biannual basis across all designated sites. This procurement is classified under NAICS code 811310 for Miscellaneous Repair and Maintenance. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, at 8:00 PM. The contract is structured as a subcontract and no set-asides have been designated. Performance of the services will occur at facilities within Henry County, Georgia, though exact locations are not specified. The full solicitation can be accessed via the provided state procurement portal link.

Henry County Board of Commissioners

POSTED

DEADLINE

RFP #27-03, Generator Services and Maintenance - Annual ContractHenry County is seeking qualified vendors to provide annual generator services and maintenance for generators located across various county buildings under a renewable one-year contract. The selected contractor must supply all necessary labor, materials, equipment, and services to ensure proper operation, scheduled maintenance, and timely repairs of the generators. Proposals must be submitted by 3:00 PM local time on August 25, 2026, and can be delivered in person, via mail or common carrier to the Purchasing Department at 140 Henry Parkway, McDonough, GA 30253, or electronically through the County’s eProcurement Portal. Emailed or faxed submissions will not be accepted. Once submitted, proposals cannot be withdrawn for sixty days except as permitted by law, and the County retains the right to reject any or all proposals without explanation or to waive minor technical discrepancies. The solicitation is managed by the Henry County Board of Commissioners, with primary contact information provided through Christina Dismuke at purchasing@henrycountyga.gov or 770-288-6027.

Henry County Board of Commissioners

POSTED

DEADLINE

Repair & Parts for sheet ironer at Richmond SSLCThe contract solicitation titled Repair & Parts for sheet ironer at Richmond SSLC is issued by the Texas Health and Human Services Commission under solicitation number HHS0017554v3, posted on July 24, 2026, with a response deadline of August 7, 2026, at 4:30 PM CT. This solicitation is categorized as a SLED procurement, indicating it is directed toward state, local, or educational entities, and the work is to be performed in Texas, specifically at the Richmond SSLC facility. The scope involves the repair and provision of necessary parts for a sheet ironer, though specific technical requirements or part specifications are not detailed in the provided metadata. The primary point of contact for inquiries is Kimberly Andrews, reachable at 972-337-6254 or Kimberley.Andrews@hhs.texas.gov, and all submissions must be made through the Texas SmartBuy portal via the provided UI link. No set-aside status or NAICS code is listed, suggesting the opportunity is open to all qualified offerors without specific small business or socioeconomic preferences. Bidders are expected to respond by the stated deadline with proposals addressing the repair needs, parts supply, and associated service terms for the equipment at the designated location.

Health and Human Services Commission

POSTED

DEADLINE

Preventive Maintenance and Field Service SupportThe contract titled Preventive Maintenance and Field Service Support entails ongoing services for the upkeep, performance testing, and field repairs of vending machines, with requirements including quarterly inspections, software updates, and comprehensive service documentation to ensure operational reliability. These tasks are critical to maintaining system functionality and compliance across installed units, with all work performed under a subcontract structure tied to a Total Small Business Set-Aside classification under FAR 19.5, reserving eligibility exclusively for small businesses. The North American Industry Classification System code 811310 confirms the focus on miscellaneous repair and maintenance services, aligning the scope with institutional support roles rather than manufacturing or sales. The solicitation, posted on July 24, 2026, with a response deadline of August 17, 2026, is managed by the Nashville Area Indian Health Service under the U.S. Department of Health and Human Services, indicating the services support health-related facilities where vending machines provide essential goods or services to patients and staff. While specific locations and contact details are not provided, performance is expected to occur wherever the agency's vending equipment is deployed, requiring contractors to operate efficiently across potentially dispersed or remote sites. All service activities must be thoroughly documented to ensure accountability, audit readiness, and consistent service standards throughout the contract term.

Nashville Area Indian Health Svc

POSTED

DEADLINE

Fuel System Preventive Maintenance ServicesThe contract entails the provision of annual preventive maintenance services for all fuel system components at the U.S. Embassy in Podgorica, including storage tanks, pumps, filters, transfer systems, and associated controls. The work must be performed to ensure the continued safety, operational reliability, and full compliance with manufacturer specifications and environmental regulations, maintaining the integrity of critical fuel infrastructure essential to embassy operations. All maintenance activities are required to meet stringent standards to prevent downtime, mitigate hazards, and uphold federal and host nation compliance requirements. This subcontract opportunity is posted with a response deadline of August 17, 2026, and is categorized under NAICS code 811310 for industrial and commercial machinery and equipment repair and maintenance. The place of performance is firmly established in Podgorica, Montenegro, with the U.S. Department of State’s Embassy serving as the contracting entity. While no set-aside provisions or specific point of contact details are provided, interested parties must submit proposals prior to the stated deadline to be considered for award, with performance expectations centered on precision, regulatory adherence, and uninterrupted system functionality.

POSTED

DEADLINE

Refrigeration System Leak Detection and Repair ServicesThe contract titled Refrigeration System Leak Detection and Repair Services is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, targeting NAICS code 811310 for appliance repair and maintenance. Contractors are required to perform comprehensive diagnostic testing to locate refrigerant leaks in HVAC and refrigeration systems, repair or replace malfunctioning components, properly evacuate the system of air and moisture, and recharge it with the correct type and quantity of refrigerant. All work must include final performance verification to ensure the system operates efficiently and meets specified standards after repair. This opportunity was posted on July 24, 2026, with a firm response deadline of July 27, 2026, and is managed by the 246-NETWORK Contracting Office 6 within the Department of Veterans Affairs. While specific performance locations and point of contact details are not provided, the contract enforces strict compliance with industry best practices for refrigerant handling and system integrity. Only qualified SDVOSB entities are eligible to respond, emphasizing the federal commitment to supporting veteran-owned small businesses through targeted contracting opportunities.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

CO₂ Fire Suppression System Inspection and MaintenanceThe contract involves the annual inspection and maintenance of a CO₂ fire suppression system serving nine cylinders, requiring comprehensive evaluations including weight verification, visual examinations, and functional testing of critical components such as pipe integrity, pressure switches, alarms, and pull cables. All nine hoses associated with the system must be replaced as part of the required maintenance, ensuring continued operational reliability and safety compliance. The work is governed under a Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, and is classified under NAICS code 811310 for industrial and commercial equipment and machinery repair and maintenance. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and is administered by the Department of Homeland Security’s Sflc Procurement Branch 2. The performance location is specified with a zip code of 04841, though the exact city and state are not provided.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

On-Site Installation and Training ServicesThe contract entails the delivery, setup, and on-site training for clinical staff at the Minneapolis VAHCS regarding the proper operation and safety protocols for wheelchair scissor lifts. Services are to be performed directly at the facility located in Minneapolis with a ZIP code of 55417, ensuring that personnel are fully competent in using the equipment safely and efficiently. The work falls under NAICS code 811310, indicating it involves other miscellaneous repair and maintenance services, and is structured as a subcontract. The opportunity was posted on July 24, 2026, with a response deadline of July 31, 2026, at 9:00 PM, allowing interested vendors a short window to submit proposals. The contracting authority is the Department of Veterans Affairs through the Network Contract Office 23, and the performance location is fixed at the Minneapolis facility with no flexibility in location. No set-aside type is specified, meaning the contract is open to all eligible contractors regardless of business size or ownership category.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Repair and On-Call Service SupportThe contract requires provision of emergency repair services for dishwashing machines with a guaranteed response time of no more than 48 hours from the time of service request. All necessary parts, labor, and travel expenses are included in the scope of work, except for damages resulting from negligence by the Government. The services are to be performed at the designated location in Panama City, with the contractor responsible for ensuring timely and effective restoration of equipment functionality. This is a subcontract under the North American Industry Classification System code 811310, issued by the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Jacksonville. Proposals must be submitted by the deadline of August 17, 2026, and the opportunity was posted on July 24, 2026, with no set-aside provisions specified.

Navsup Flt Logistics Ctr Jacksonville

POSTED

1 day ago

DEADLINE

in 23 days

AI Contract Overview

BC Hydro is seeking qualified suppliers to provide comprehensive hydraulic cylinder services including repair, refurbishment, replacement, maintenance, supply, and installation at its facilities throughout British Columbia on an as-needed basis. The contract is initially set for a three-year term with the potential for extensions totaling up to twelve additional years, resulting in a maximum possible duration of fifteen years. This procurement is subject to Chapter 5 of the Canadian Free Trade Agreement and all responses must be submitted in English. Bidders must register on the updated BC Bid platform, as failure to complete or maintain registration will result in disqualification, and no responsibility is assumed by BC Hydro for non-compliance. The opportunity was posted on May 12, 2026, with responses due by July 13, 2026. Changes to the solicitation are issued as Addenda and are published exclusively on the Addenda tab of the BC Bid portal, superseding prior practices where amendments required re-submission. All inquiries must be directed to bidstation@bchydro.com, and documents cannot be obtained from any other source. Negotiation may occur following the submission deadline.

General Info

BC Hydro seeks hydraulic cylinder services for up to 15 years, bids due July 13, 2026, via BC Bid only.

Agency

Government of Canada → British Columbia Hydro and Power Authority

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 12

Solicitation

Response DeadlineJul 13

Deadline has passed

Submission Closed

07/13/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → British Columbia Hydro and Power Authority

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → British Columbia Hydro and Power Authority

Office AddressN/A

Contacts

Contracting Authority

contact@example.gov

Full Description

ATTENTION: Documents pertaining to this advertisement can NOT be obtained from the contact person above. Any inquiries or questions regarding the opportunity, please email the procurement contact found in the opportunity document.To eliminate the risk of bidder disqualification based on failure to re-submit in response to an Amendment, as required by the new BC Bid rules, BC Hydro has changed its practice as of November 24, 2022, such that all changes to BC Hydro (including Q&As and Addenda) are now treated as “Addenda” (and not “Amendments”) within the BC Bid rules and, as such, no longer require re-submission by the bidder of any already made submission. Please see Addenda instructions for further information. The above practice change means that changes (including Q&As and Addendas) to BC Hydro opportunities will no longer be posted in the RFx Documents section of this Overview tab. Please refer to the Addenda tab for any changes to this opportunity.Supplier RegistrationInterested suppliers should note that BC Bid has upgraded its platform and that registration (or re-registration) in the new platform is necessary in order to respond to any opportunity after May 30, 2022. Suppliers are encouraged to register on the new BC Bid platform, in accordance with BC Bid process requirements, well in advance of the Closing Time for the opportunity to which they may want to respond. Supplier registration can take a number of days to complete. Step-by-step guides are available to help users register and create their accounts. Failure to comply with BC Bid requirements is at the supplier’s own risk and BC Hydro does not assume any responsibility for the consequences of such non-compliance, including the supplier’s inability to submit a response to this or any other BC Hydro opportunity. *** Opportunity Details ***BC Hydro invites proposals for hydraulic cylinder services that generally includes repair, refurbishment, replacement, maintenance, supply, and installation of hydraulic cylinders at BC Hydro facilities across the Province of British Columbia on an ‘as needed’ basis.The Contract is expected to be for an initial term of (three) years, which may be extended for up to (twelve) year(s) through one or more contract extensions, for a potential total term of (fifteen) years.This procurement may involve negotiation.This opportunity is subject to Chapter 5 of the Canadian Free Trade Agreement.All responses should be in English.

More opportunities from Government of Canada → British Columbia Hydro and Power Authority

Same awarding agency

International

Canoe Procurement Group of CanadaBC Hydro is seeking suppliers to participate in procurements managed by the Canoe Procurement Group of Canada for the period from June 1, 2026, to May 31, 2027, under solicitation number BCNTV_24443. All responses must be submitted in English and are subject to Chapter 5 of the Canadian Free Trade Agreement. Suppliers must be registered on the upgraded BC Bid platform, as registration or re-registration is mandatory to respond to this opportunity after May 30, 2022, and failure to complete this process will result in disqualification. Changes to the opportunity, including questions and answers or addenda, are posted exclusively on the Addenda tab within BC Bid and no longer require resubmission of previously submitted responses, following a policy update effective November 24, 2022. The procurement is administered by British Columbia Hydro and Power Authority, with the contracting authority reachable via bidstation@bchydro.com. The response deadline is May 31, 2027, at 7:00 PM Pacific Time, and all relevant documentation must be accessed through the BC Bid platform, not through direct contact with the provided point of contact.

POSTED

2 months ago

DEADLINE

in 10 months

View Details