This Solicitation opportunity from New York was posted on October 7, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Hydraulic Parts, Equipment, Repairs and Maintenance

Closed

2025-03-FACState & Local

Submission Closed10/29/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333618

New

DIBBS

PARTS KIT, DIESEL ENGIN

Solicitation # SPE7L5-26-T-5000

This contract is for the procurement of three diesel engine parts kits, identified by NSN 2815017275717 and part number PA12655724 from Fairbanks Morse, LLC. The agreement specifies a delivery timeline of 162 days, with a required delivery date of February 6, 2027. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking. There are explicit prohibitions against the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. All preservation and packaging for the kits must comply with the latest revision of MIL-STD-2073-1 Appendix D.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-972M

This contract is for the procurement of two piston ring sets, 0.010 oversize, designed for use in Onan diesel engine model DJBMA. The items are identified by NSN 2815009330798 and Cummins Power Generation Inc. part number 113-0331-10. The delivery is required within 20 days, with a required delivery date of August 19, 2026, and the shipping destination is the Ordnance Readiness Development Center in Nantou County, Taiwan. The agreement specifies that FOB, inspection, and acceptance all occur at the point of origin. Compliance with DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking, is mandatory. Additionally, the contractor must adhere to technical and quality requirements set forth in the DLA Master List and ensure the removal of government identification from any non-accepted supplies.

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-658M

This contract, identified as SPE4A7-26-T-658M, is a solicitation for the procurement of one Spring and Dual Shaft Assembly, part number 8900892G015, manufactured by Ametek Inc Aerospace Div. The item is classified as a critical application item under NSN 6620000865223. Delivery is required within 171 days after order, with a need ship date of February 12, 2027, and a final required delivery date of May 16, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires compliance with CMMC Level 2 self-assessment and covered defense information protocols. Quality assurance is governed by zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the destination. The contract also incorporates various technical and quality requirements from the DLA Master List, including specific mandates for measuring and test equipment and bare item marking.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L1-26-U-0597

This contract is for the procurement of 83 intake air cleaner filter elements under solicitation number SPE7L1-26-U-0597. The items are commercial off the shelf components designed for use in Road Grader Model 5R399, identified by NSN 2940008588178. Multiple approved manufacturers and part numbers are listed, including options from Caterpillar, WIX Corp, and Honeywell. The agreement specifies a delivery timeframe of 62 days with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. This is a Women-Owned Small Business Set-Aside procurement managed by the Department of Defense Land Supply Chain.

POSTED

DEADLINE

TRANSMITTER, PRESSURE

Solicitation # SPE4A6-26-T-17YQ

This contract is for the procurement of 45 pressure transmitters, identified by NSN 6620-01-067-8336 and part number TRU-80/A. The items must be manufactured in accordance with basic specification MIL-T-25624G and reference drawing 13873. This is designated as a critical application item, requiring strict adherence to quality and technical standards, including the use of qualified products or manufacturers lists and specific measuring and test equipment requirements. The agreement mandates compliance with CMMC Level 2 self-assessment and covered defense information protocols. Delivery is set for 171 days after order, with a required delivery date of May 11, 2027, shipping FOB Origin to DLA Distribution Jacksonville. Packaging must follow ASTM D3951 and MIL-STD-129, while sampling and inspection will be conducted at the origin according to MIL-STD-1916 or ASQ H1331.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-5023

This contract is for the procurement of one diesel engine, identified by NSN 2815015603277 and part number RB1054 from WS Darley & Co. The item is classified as a commercial critical application item. Delivery is required within 100 days, with a required delivery date of December 6, 2026. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Compliance with the DLA Master List of Technical and Quality Requirements is required, and the provider must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment standards. Inspection and acceptance will take place at the destination.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-5029

This contract, identified as SPE7L5-26-T-5029, is a total small business set-aside for the procurement of 626 piston ring sets under NSN 2815-01-476-5066. The items are identified as critical application items and are associated with Rolls-Royce Solutions America Inc part number 23522954. The delivery is required within 168 days after order, with a need ship date of February 12, 2027, and an original required delivery date of November 11, 2026. The shipment is to be delivered FOB Origin to DLA Distribution Anniston in Alabama. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements RP001. The contract incorporates technical and quality requirements via the DLA Master List and specifies that inspection and acceptance will occur at the destination.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE7L1-26-T-975B

This contract is a solicitation from the Department of Defense Land Supply Chain for the procurement of 750 O-rings used in Mark 46 and Mark 48 Torpedoes. The items are identified by NSN/Part Number 0001S00000061 and must be delivered within 220 days after receipt of order. The place of performance is located in Tracy, California, and the procurement falls under NAICS code 333618. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards and documentation for source approval requests. A critical mandate of this contract is that all supplied items must be entirely free of asbestos. Any alternative materials used must be approved according to established clauses. The solicitation, numbered SPE7L1-26-T-975B, requires responses by August 27, 2026.

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-971U

This contract is for the procurement of one intermediate exhaust pipe, identified by NSN 2990015564735 and part number 3819290C1. The order is issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-971U. Delivery is required within five days of order, with a required delivery date of August 13, 2026. The item is to be shipped FOB Origin to the US Army at Fort Bliss, Texas, using the fastest traceable means available. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards RP001 and ASTM D3951, with all marking and labeling following MIL-STD-129. Inspection and acceptance will take place at the destination. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-973M

This contract, identified as SPE7L1-26-T-973M, is a solicitation from the Department of Defense Land Supply Chain for one exhaust muffler, specifically John Deere Construction and Forestry part number 4687844 with NSN 2990-01-475-0452. The delivery is required within five days after receipt of order, with a required delivery date of August 17, 2026. The shipment is designated as a high-priority NMCS shipment and must be sent via the fastest traceable means to the PFC Reynolds USAR Center in Parkersburg, West Virginia. The agreement specifies that delivery is FOB Origin, while inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to the DLA Master List of Technical and Quality Requirements and specific palletization standards under RP001. Additionally, the contract mandates the removal of government identification from any non-accepted supplies.

POSTED

DEADLINE

PARTS KIT, AIRBOX DRAIN

Solicitation # SPE7L5-26-T-5026

This contract is for the procurement of 19 airbox drain parts kits, identified by NSN 2815012100374 and Rolls-Royce Solutions America Inc part number 5149520. The delivery timeline is set for 168 days, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1 and MIL-STD-129. Each kit must be packaged individually with a detailed parts list included. All loose hardware must be secured in sealed containers to prevent corrosion or damage, and bulk shipping of hardware is explicitly prohibited to ensure materials arrive in serviceable condition without requiring additional sorting by depot personnel.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-657R

This contract, identified as SPE4A7-26-T-657R, is a solicitation by the Department of Defense for the procurement of five units of a turbine and balance component, part number 8900950G004, manufactured by Ametek Inc. The items are classified as critical application items under NSN 6620006262768. Delivery is required within 171 days, with a required delivery date of November 22, 2026, and a need ship date of February 12, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, bare item marking, and the removal of government identification from non-accepted supplies. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with zero non-conformance required for acceptance. Additionally, the contractor must comply with Covered Defense Information requirements and CMMC Level 2 self-assessment standards. Packaging must follow ASTM D3951 and MIL-STD-129 guidelines.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days

General Info

Agency

New York → City of SchenectadyView Agency

NAICS

333618 - Other Engine Equipment ManufacturingView NAICS

Place of Performance

NY, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedOct 7

Solicitation

Response DeadlineOct 29

Deadline has passed

Submission Closed

10/29/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNew York → City of Schenectady

Contacts1 person available

OfficeN/A

Organization / Agency

New York → City of Schenectady

View Agency Profile

Office AddressN/A

Contacts

Sara HughesPurchasing Supervisor

contact@example.gov

+1 (555) 000-0000

Full Description

2025-03-FAC - Hydraulic Components, Machinery, Repair Services, and Maintenance. Schenectady County, New York, United States. City of Schenectady. Solicit proposals for the acquisition of hydraulic components, machinery, repair services, and maintenance.