Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Hydrographic Surveying and Field Engineering

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Hydrographic Surveying and Field Engineering supports prime contractors on USACE New England District projects. The scope of work involves performing critical pre- and post-dredge surveys to verify depths and volumes using GPS/GNSS positioning systems and either single-beam or multibeam sonar. Additionally, the contractor is responsible for conducting pre-dredging photographic surveys in accordance with Section 01 71 23 and providing essential data for Daily Dredge Operations Location Maps. The selected provider will deliver comprehensive survey reports, bathymetric maps, and precise volume calculations. This opportunity falls under NAICS code 541370 and is associated with the Department of Defense via the W2SD Endist New England agency, with the place of performance located in Concord.

General Info

Subcontract for USACE New England hydrographic surveying, dredging verification, and mapping in Concord.

NAICS

541370 - Surveying and Mapping (except Geophysical) Services

Place of Performance

Concord, MA, 01742, USA

Set-Aside

NONE

Documents

This scope was carved out of W912WJ27X1CUP.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Construction Services for Confined Aquatic Disposal Cell Construction and Maintenance Dredging of the Providence River Federal Navigation Project, Providence, Rhode Island.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W2SD Endist New England
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs pre- and post-dredge surveys for prime contractors on USACE New England District projects. Conducts bathymetric surveys using multibeam or single-beam sonar and GPS/GNSS positioning systems to verify depths and volumes. Provides data for Daily Dredge Operations Location Maps (DOLM) and performs pre-dredging photographic surveys per Section 01 71 23. Delivers survey reports, bathymetric maps, and volume calculations.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → W2SD Endist New England

Same awarding agency

NAICS: 237990
New
Federal
Construction Services for Confined Aquatic Disposal Cell Construction and Maintenance Dredging of the Providence River Federal Navigation Project, Providence, Rhode Island.
Solicitation # W912WJ27X1CUP
The U.S. Army Corps of Engineers, New England District, is seeking information from small and large businesses for a dredging project in Providence, Rhode Island, under NAICS code 237990. The project is estimated to cost between $80,000,000 and $100,000,000, with a solicitation expected around March 15, 2027. Construction is scheduled to begin in September 2027 and last approximately two years, spanning two dredging seasons from September 1, 2027, to August 31, 2029. The work is divided into two primary sequences: the construction of a new Confined Aquatic Disposal (CAD) cell at Edgewood Shoals North, including an access channel, and the subsequent maintenance dredging of the Providence River and Harbor Federal Navigation Project to a depth of -40 feet MLLW plus two feet of allowable overdepth. The total scope involves mechanically dredging approximately 5,500,000 cubic yards of material using closed clamshell buckets. Specifically, 3,200,000 cubic yards will be removed to create the CAD cell, with material placed at Port Edgewood Basin, Fox Point Reach CAD cells, Prudence Island, and the Rhode Island Sound Disposal Site. The remaining 2,300,000 cubic yards of maintenance material will be placed within the newly constructed Edgewood Shoals North CAD cell. To meet strict environmental windows and project timelines, the contractor must maintain a production rate of at least 300,000 cubic yards every 30 calendar days, operating 24 hours a day, 7 days a week. Interested firms must submit a capabilities package by November 26, 2026, demonstrating experience with these production rates and open water placement in New England during winter months.
Other Heavy and Civil Engineering Construction

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS