Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Hydrostatic and Non-Destructive Testing Services

Active

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Hydrostatic and Non-Destructive Testing Services supports prime contractors on Navsup Weapon Systems Support Mech projects for the Department of the Navy. The scope of work involves performing mandatory safety and integrity testing on assemblies and welds, specifically utilizing hydrostatic pressure tests and non-destructive testing methods such as X-ray, ultrasonic, or dye penetrant equipment in accordance with Drawing 7491389. The service provider is responsible for generating and delivering signed test certifications and NDT reports, with submissions processed via Wide Area Workflow. Performance of these services is centered in Mechanicsburg, Pennsylvania, under NAICS code 541380.

General Info

Hydrostatic and non-destructive testing services for Navy weapon systems projects in Mechanicsburg, Pennsylvania.

Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

NONE

Documents

This scope was carved out of N0010425QFB40.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STUFFING BOX ASSEMB — 2040012782885 — N0010425QFB40

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs mandatory safety and integrity testing on assemblies and welds for prime contractors on Navsup Weapon Systems Support Mech projects. Conducts hydrostatic pressure tests and non-destructive testing (NDT) using X-ray, ultrasonic, or dye penetrant equipment per Drawing 7491389. Generates test certifications for submission via Wide Area Workflow. Delivers signed test certifications and NDT reports.

Similar Contracts

Same NAICS industry code

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet. All work must be performed by contractors possessing all required State of Illinois licenses and certifications, utilizing accredited laboratories, and adhering to federal, state, OSHA, and EPA regulations. The award will be based on best value, with submissions due by 3:00 PM CT on October 21, 2026. Required documentation includes a completed bid sheet, a supplier packet containing a W-9 and self-certification form, proof of insurance, and three references for projects of similar scope. Subcontractors must acquire a Unique Entity Identification number (UEI) and comply with Service Contract Labor Standards, specifically Wage Determination SCA 2015-5019 Rev 31. The contract incorporates various FAR clauses regarding small business utilization, equal opportunity, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis to MTC.

Joliet Job Corps

POSTED

about 3 hours ago

DEADLINE

First Article Testing (FAT) and Quality ComplianceThis subcontract, titled First Article Testing (FAT) and Quality Compliance, involves providing technical testing and reporting services for prime contractors under DLA supply contracts. The scope of work requires the testing of five initial Objective Flip Cover units to ensure full compliance with DLA Master List specifications and source-controlled drawings. These evaluations must be conducted using specialized testing equipment to verify quality and technical standards. The primary deliverable is a formal First Article Test report, which must be generated and submitted within 90 days of the contract award. This project is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located in New Cumberland.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, focuses on First Article Testing and Quality Validation. The selected provider will perform critical quality assurance services for prime contractors on DLA supply contracts, specifically conducting dimensional inspections via CMM metrology and material verification within testing laboratories. Additional responsibilities include the verification of manufacturing process sheets and the provision of quality assurance surveillance for sub-venders. To ensure compliance with aerospace industry requirements, the contractor must adhere to AS9100 or equivalent quality standards. The primary deliverables for this engagement are the First Article Testing Report and a comprehensive Quality Certification package. Performance for this contract is centered at Tinker AFB, and the response deadline for the solicitation is October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test services supports prime contractors under the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The scope of work involves performing First Article Testing to validate initial production units, ensuring they meet strict dimensional requirements of 0.170 thickness, 0.380 height, and 0.435 width. Additionally, the contractor must verify material integrity to ensure no splicing or gluing has occurred, utilizing precision measurement tools and material analysis equipment to confirm compliance. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. The primary deliverables include a comprehensive First Article Test report and a formal certification confirming that all units adhere to the Statement of Work. Interested parties should note the response deadline of October 29, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

Quality Inspection and Sampling Services for Critical Aerospace ComponentsThis subcontract for Quality Inspection and Sampling Services for Critical Aerospace Components supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for performing zero-based sampling and quality inspections for prime contractors on aerospace procurements, specifically focusing on turbine engine components. The scope of work includes executing sampling plans according to MIL-STD-1916 or ASQ H1331 to ensure part authenticity and strict compliance with Boeing specifications for critical application items. The service provider will utilize precision measurement tools to verify components and is required to deliver detailed inspection reports and sampling certifications. Performance for this contract takes place in New Cumberland, Pennsylvania. The solicitation was posted on October 18, 2026, with a response deadline of October 26, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

First Article Testing and Validation for Electrical AssembliesThis subcontract involves performing specialized first article testing and validation for electrical assemblies on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work focuses on executing validation tests for NSN 5995-01-676-1147 in accordance with RT001 standards and specific technical data. The selected provider must coordinate closely with Government Quality Assurance Representatives for in-process verification and is required to deliver a formal written First Article Test Report upon completion. To be eligible, contractors must hold JCP certification for handling ITAR and EAR data and maintain certification in either SAE AS9003 or ISO 9001. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties must submit their responses by October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

First Article Test (FAT) EvaluationThis subcontract, issued by the Department of Defense via Depot Hill, requires the performance of First Article Testing for a solenoid valve with NSN 4810-01-044-9244. The selected contractor will utilize laboratory equipment to verify the performance and tolerances of the first production unit, ensuring it meets all necessary specifications. This process involves close coordination with the Engineering Support Activity for final approval and culminates in the delivery of a validated sample unit and a comprehensive FAT report. The project is based at Hill AFB and falls under NAICS code 541380. Due to the handling of Controlled Unclassified Information, the contractor must maintain CMMC Level 2 certification. Interested parties must respond by October 29, 2026.

POSTED

about 16 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The selected provider will perform quality conformance validation for prime contractors on Defense Logistics Agency supply contracts, specifically focusing on the execution of Production Lot Tests. This work involves using electrical testing equipment, such as signal analyzers and multimeters, to verify NSN part number accuracy, signal integrity, and serial cable continuity in accordance with established DLA quality assurance standards. The scope of work culminates in the delivery of a formal certification of quality conformance or a detailed test report. Performance for this contract is located in Tracy, California, under NAICS code 541380. Interested parties must note the response deadline of October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Electrical Component Testing and Certification ServicesThis subcontract for Electrical Component Testing and Certification Services involves performing First Article Testing for prime contractors supporting DLA supply contracts for NSN 016761127. The scope of work requires the testing of two initial production units using signal generators, continuity testers, and multimeters to ensure full performance verification against Engineering Support Activity standards. All technical data handling must strictly comply with DFARS 252.204-7012 regulations. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. The selected provider is required to deliver a formal First Article Test Report within 30 calendar days of testing. This opportunity falls under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

First Article Testing and Quality Assurance ServicesThis subcontract for the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division involves providing First Article Testing and Quality Assurance Services. The selected contractor will perform testing on one unit of NSN 6150006130108 using certified M&TE and sampling plans in accordance with MIL-STD-1916, ASO H1331, or MIL-STD-105/ASQ Z1.4. The primary deliverables for this project are a comprehensive First Article Test Report and one validated test unit. To be eligible, contractors must maintain ISO 9001:2015 and CMMC Level 2 certifications. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties must submit their responses by October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test (FAT) Services supports prime contractors on DLA Weapons Support supply contracts. The selected provider will execute testing under CLIN 0002, utilizing specialized measurement equipment to validate that electrical and physical specifications align with government requirements. A critical component of the scope involves coordinating evaluations with the Engineering Support Activity to ensure compliance, ultimately delivering a formal FAT Report and an approved first article unit. The performance of this contract will take place at Tinker AFB. To be eligible, contractors must maintain ISO 9001 or SAE AS9003 certification. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

First Article Test (FAT) and Shock Extension ReportingThis subcontract, issued by the Department of Defense DLA Weapons Support Active Devices Division, focuses on technical validation and testing for prime contractors delivering DLA supply contracts. The scope of work includes executing Contractor First Article Tests, generating shock extension reporting in accordance with MIL-S-901, and ensuring all manufacturing documentation complies with MIL-T-31000. Key deliverables for the project consist of the FAT Report, the Shock Extension Report, and certified documentation. To qualify, contractors must possess specialized shock testing facilities and RF testing equipment, as well as CMMC Level 2 cybersecurity certification. This opportunity is a total small business set-aside under NAICS code 541380, with performance located in New Cumberland. Interested parties must submit their responses by October 29, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

BALL KIT, CERAMIC — 4820016188385 — N0010426QFD00

Solicitation # N0010426QFD00

This solicitation issued by NAVSUP Weapon Systems Support Mechanicsburg is for the teardown, evaluation, repair, and modification of a Ceramic Ball Kit (NSN 4820-01-618-8385). The material is designated as Special Emphasis Level I, Scope of Certification, or Quality Assured because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. The contractor must provide a single award based on a combination of technical acceptability and past performance, which is weighted as more important than price. Delivery is required within 30 days on a FOB Destination basis. Technical requirements mandate strict adherence to Naval Ship Systems Command drawings and specific material standards, including the use of centrifugally cast 6AL-4V or ASTM-B381 for balls and MC903 cast nylon for seats. The contractor must maintain a quality system compliant with ISO-9001 or MIL-I-45208 and ensure full traceability via Material Identification and Control codes. Key deliverables include a Certificate of Compliance and test certifications submitted via Wide Area Workflow for review and acceptance by the Portsmouth Naval Shipyard prior to shipment. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for wood packaging materials and item unique identification.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

SET SCREW — 5305014815095 — N0010427QBB20

Solicitation # N0010427QBB20

Solicitation NO0014-27-Q-BB20 is a Request for Quotations issued by NAVSUP Weapon Systems Support MECH for the procurement of set screws, identified by NSN 5305-01-481-5095. The government intends to award the contract to the responsible offeror providing the lowest priced, technically acceptable offer. Technical and quality requirements are governed by the Individual Repair Part Ordering Data, drawings, and military specifications available through the BPMI e-commerce website. In the event of a conflict, Section C of the contract takes precedence over Section D. The contractor is required to maintain a government-acceptable inspection system and submit all Reports of Test and Inspection electronically via the Wide Area Workflow platform. Strict adherence to packaging and marking standards is mandatory, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking, with labels reflecting the nomenclature cited in the IRPOD. Any departures from product definitions require an approved Request for Variance, and the intentional use of mercury is prohibited. Delivery is expected within 180 days, with inspection and acceptance occurring at the origin.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

TRANSMITTER,PRESSUR — 6685014851288 — N0010426QUC50

Solicitation # N0010426QUC50

Solicitation NO0014-26-Q-UC50 is a request for quotations issued by NAVSUP Weapon Systems Support Mech for the manufacture and procurement of a Pressure Transmitter, NSN 6685-01-485-1288. The required item must conform to the design represented by Cage Code 81349, reference number 89DSW60PSID3002, and must be produced by offerors whose products are approved for inclusion on Qualified Products List 24304. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations considering item, price, and supplier risk via the Supplier Performance Risk System. The contract mandates strict adherence to quality and technical standards, including physical identification per MIL-STD-130 Rev N and IUID requirements under DFARS 252.211-7003. Packaging must comply with MIL-STD-2073, with specific levels for domestic and overseas shipments and specialized requirements for electrostatic discharge protection and oxygen cleaning. Inspection and acceptance will occur at the origin, though Government Source Inspection is required, and contractors must maintain inspection records for 365 days following final delivery. Deliverables are expected within 365 days, with a minimum procurement delivery lead time of 90 days. Offerors who are not the original equipment manufacturer must provide proof of authorized distributorship. Administrative requirements include electronic invoicing through the Wide Area Workflow system and registration in the System for Award Management. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and Buy American preferences.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

SEAL — 4320015028298 — N0010427QJA16

Solicitation # N0010427QJA16

Solicitation N0010427QJA16, issued by the Navsup Weapon Systems Support Mech, is a fixed-price request for quotations for the teardown, evaluation, and repair of a SEAL (NSN 4320-01-502-8298). The contractor is required to perform all work in accordance with approved repair standards, technical orders, and TDP Version 006, ensuring the final product meets all operational and functional requirements. A critical performance metric is the Repair Turnaround Time (RTAT) of 35 days, measured from the physical receipt of the asset to the date of acceptance. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. The contract mandates strict quality assurance and packaging standards, including physical identification per MIL-STD-130 and preservation according to MIL-STD-2073-1 for OCONUS shipments or ASTM D3951-18 for CONUS shipments. Contractors are responsible for all inspections, though the government reserves the right to perform its own oversight. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, hazardous materials, and domestic preferences. Quotations are due by October 26, 2026, and must be submitted by authorized distributors of the original manufacturer.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

STEERING WHEEL — 2030013160764 — N0010427QJA19

Solicitation # N0010427QJA19

Solicitation N0010427QJA19 is a firm-fixed-price request for quotation issued by the Department of the Navy, Navsup Weapon Systems Support Mech, for the teardown, evaluation, repair, and modification of a steering wheel, identified by NSN 2030-01-316-0764. The contractor must ensure the repaired item meets the operational and functional requirements of CAGE Code 03956, Reference No. 1977616, utilizing original manufacturer specifications and drawings. A key performance requirement is a Repair Turnaround Time of 80 days from the physical receipt of the asset to the date of acceptance. Government Source Inspection is required, and acceptance will occur at the origin. The contract mandates strict adherence to quality and marking standards, including MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging. All invoicing must be processed electronically via Wide Area Workflow. Evaluation of offerors will be conducted through the Supplier Performance Risk System, focusing on item and price risk. Prospective contractors must be authorized distributors of the original manufacturer and provide signed proof on company letterhead. Quotations must include total pricing and confirmed turnaround times, with a response deadline of November 02, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

PUMP UNIT,CTFGL — 4320015758318 — N0010427QJA17

Solicitation # N0010427QJA17

This fixed-price solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, seeks quotations for the teardown, evaluation, repair, and modification of a Pump Unit, CTFGL (NIIN 015758318). The government requires a repair turnaround time of 35 days, measured from the date of asset return to the date of final acceptance. All repair work must adhere to the contractor's standard overhaul practices and approved technical directives, with physical identification and packaging complying with MIL-STD-130 and MIL-STD-2073, respectively. Government Source Inspection is mandatory, and final acceptance must be obtained within the established turnaround timeframe. The award will be made to a single, technically acceptable offeror determined to be most advantageous to the government, with past performance weighted as more important than price. Eligible respondents must be authorized distributors of the original manufacturer and provide proof of such status on company letterhead. The contract incorporates several critical federal regulations, including a DO priority rating for national defense, DFARS cybersecurity requirements for safeguarding covered defense information, and strict adherence to the Buy American and Trade Agreements certificates. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

HYDROGEN,REACTOR GR — 6830001805919 — N0010427QBB30

Solicitation # N0010427QBB30

Solicitation N0010427QBB30 is a fixed-price request for quotations issued by the Department of the Navy, NAVSUP Weapon Systems Support Mechanicsburg, for the procurement of Hydrogen Reactor GR (NSN 6830-00-180-5919). The requirement is governed by Technical Data Package version 027 and mandates strict adherence to the Individual Repair Part Ordering Data (IRPOD) for quality assurance and inspection. A critical component of this contract is the requirement for production lot testing, with certified reports of test and inspection, including Form DD-1222, to be submitted to NAVSUP-WSS Code N9433 and samples delivered to Puget Sound Naval Shipyard. The contract emphasizes rigorous packaging and marking standards, requiring compliance with MIL-STD-2073-1 for preservation and MIL-STD-129 for marking, including specific requirements for Item Unique Identification (IUID) and Depot Level Repairable (DLR) labels. Because the material is hazardous, the contractor must provide Safety Data Sheets and GHS-compliant labels per FAR 52.223-3. Award will be granted to the responsible offeror with the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Inspection and acceptance are designated at the origin.

Industrial Gas Manufacturing

POSTED

DEADLINE

SPACER,SPECIAL SHAP — 5365014198911 — N0010427QBA04

Solicitation # N0010427QBA04

This solicitation, issued by NAVSUP Weapon Systems Support Mech, is for the procurement of a Special Shape Spacer (NSN 5365-01-419-8911, Part Number 803-2177142-5XX-74) under a fixed-price contract. The award will be based on the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference granted to HUBZone small business concerns. Technical compliance is governed by Technical Data Package version 008 and drawing 803-2177142, with a strict prohibition on the intentional addition of mercury. The delivery timeline is set for 180 days, with terms established as FOB Destination. Contractors must adhere to rigorous quality assurance and packaging standards, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking and labeling. Items must be marked with the nomenclature SPACER and include the 13-digit contract order number and CLIN. A critical deliverable is the submission of a Certificate of Compliance per DI-MISC-81356 at the time of material delivery. Inspection and acceptance will occur at the origin. Additionally, the contractor must comply with cybersecurity requirements under DFARS 252.204-7012 and provide CMMC unique identifiers in their proposal.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Critical Safety Item (CSI) Socket Head Cap ScrewsThis subcontract involves the supply of high-strength, certified socket head cap screws, identified by NIIN 016330288, for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The contractor is responsible for manufacturing or sourcing these critical safety items in strict accordance with TDP Version 002, ensuring full material traceability and the implementation of Special Emphasis Level I Scope of Certification. Compliance requirements include adherence to FAR 52.246-11 and mandatory registration in the ECDS system using a PKI Digital Certificate. All certified screws and accompanying Level I quality certifications must be delivered to the Portsmouth Naval Shipyard. The contract is managed under NAICS code 332722 with performance associated with the Mechanicsburg location.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Repair and Certification of External JA FittingsThis subcontract, titled Repair and Certification of External JA Fittings, is issued by the Department of the Navy under the Navsup Weapon Systems Support Mech agency. The project focuses on the repair and restoration of external JA fittings for prime contractors on US Navy projects, with performance taking place in Mechanicsburg. The scope of work involves the teardown, evaluation, and inspection of items to restore them to like new or A condition in strict accordance with restricted-access technical drawings. The contractor is responsible for utilizing precision machining and inspection tools to conduct Beyond Economic Repair and Beyond Repair analysis. The final deliverables for this contract include either certified repaired fittings or formal determinations that the items are beyond repair or beyond economic repair. The work is categorized under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Supply of External JA Fittings (NIIN 014154757)This subcontract, managed by the Navsup Weapon Systems Support Mech for the Department of the Navy, involves the procurement of external JA fittings under NIIN 014154757. The selected provider is responsible for manufacturing or sourcing these fittings in strict accordance with restricted-access drawings and QPL 24403 standards. To ensure mission readiness and safety, all delivered hardware must achieve Quality Assured status and meet Special Emphasis Level I certification. The contract requires that all components be obtained through QPL-approved sourcing to maintain rigorous quality control. Performance for this requirement is centered in Mechanicsburg, Pennsylvania, with the primary objective being the delivery of physical hardware fittings to prime contractors supporting US Navy procurement projects.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Fluid Filter Head Manufacturer/SupplierThis subcontract involves the manufacture and supply of specialized Fluid Filter Heads, identified by NSN 4330-01-421-2626, for prime contractors supporting US Navy shipboard system projects. The Department of the Navy, specifically through Navsup Weapon Systems Support Mech in Mechanicsburg, requires the parts to be produced according to Special Emphasis material Level I Scope Of Certification. Key technical requirements include IUID marking in accordance with MIL-STD-130 and strict compliance with CSI standards and FAR 52.246-11. Each delivered filter head must be accompanied by a Special Emphasis Certificate of Conformance to verify that all quality and material specifications have been met.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS