This Subcontract opportunity from Washington was posted on September 3, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Independent Inspection & Code Compliance Testing

Closed

State & Local

Submission Closed09/29/2024, 05:00:00 PM PDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

BFO-BRichardson-WPT Quantitative Colliforms

Solicitation # SRC0000037617

The BFO-BRichardson-WPT Quantitative Coliforms solicitation, numbered SRC0000037617, is issued by the Environmental Management agency of Alabama. This solicitation is for a contract with a maximum total value of $25,000 and a maximum term of five years from the effective date. The project is governed by the laws of the State of Alabama, with the City of Montgomery serving as the sole venue for litigation and dispute resolution, and the Board of Adjustment of the State of Alabama acting as the sole remedy for money disputes. Offerors must submit responses electronically through the Alabama Buys portal and certify compliance with several state mandates, including E-Verify enrollment under the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration with the Alabama Secretary of State for foreign entities. The contract stipulates that any approved price escalations cannot exceed 5% of the annual cost. All products delivered are subject to inspection by the State of Alabama under the Universal Commerce Code, and acceptance is only granted following a satisfactory inspection. Payment is handled via electronic methods, including P-cards and EFT, with inquiries directed to the receiving agency.

ENVIRONMENTAL MANAGEMENT

POSTED

DEADLINE

Geotechnical & Materials Laboratory TestingThis subcontract for Geotechnical and Materials Laboratory Testing involves providing specialized testing services for prime contractors working on New Jersey Department of Transportation infrastructure projects. The scope of work focuses on the execution of approved laboratory programs to analyze the properties of soil and rock, specifically utilizing specialized equipment for consolidation and triaxial testing. All services must adhere to AASHTO and ASTM standards, and the contractor is required to obtain NJDOT cost-basis approval. The final deliverables for this engagement consist of comprehensive data sets and certified laboratory test reports. The response deadline for this opportunity is December 7, 2026.

New Jersey Department of Transportation Procurement

POSTED

DEADLINE

Valve Pressure and Performance TestingThis subcontract for Valve Pressure and Performance Testing supports NAVSUP Weapon Systems Support Mechanicsburg projects by providing independent testing and certification of refurbished ball valves. The selected contractor will be responsible for conducting rigorous pressure and leak tests utilizing precision measurement tools and either pneumatic or hydrostatic rigs. To ensure technical compliance and accuracy, the provider must hold ISO/IEC 17025 or ISO 10012 certification. The primary deliverable for this engagement is the Test Certification, identified as CDRL DI-MISC-80678, along with all supporting test data. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of December 18, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Aerospace Component Inspection and CertificationThe Aerospace Component Inspection and Certification subcontract involves providing specialized quality assurance and non-destructive testing services for prime contractors supporting DLA Aviation at Oklahoma City. The scope of work includes performing X-ray, ultrasonic testing, dye penetrant inspection, and coordinate measuring machine verification to ensure all components are defect-free. To qualify, service providers must hold AS9100 or ISO 9001 certification and are responsible for delivering detailed inspection reports and certifications of conformance. This opportunity is categorized under NAICS code 541380 and was posted on November 9, 2026, with a response deadline of December 7, 2026. The contract is managed under the Department of Defense for the agency Ok DLA Aviation At Oklahoma City.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

NDT Inspection and Quality Certification ServicesThis subcontract for NDT Inspection and Quality Certification Services supports NAVSUP Weapon Systems Support shipboard projects through the Department of Defense. The selected provider will perform non-destructive testing and quality assurance inspections, specifically executing magnetic particle and liquid penetrant inspections on weld-repaired areas in accordance with S9074-AR-GIB-010A/278. Additionally, the scope includes conducting design proof or bursting strength tests to ensure structural integrity. To qualify, the contractor must provide NDT technicians with Level II or III certifications. Key deliverables for the project include comprehensive inspection reports, NDT certification results, and First Article Test acceptance documentation. The solicitation was posted on November 9, 2026, with a response deadline of December 18, 2026, falling under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Aerospace Component Qualification and TestingThe Aerospace Component Qualification and Testing subcontract involves providing specialized qualification testing and environmental evaluation for prime contractors supporting Air Force B-2 aircraft projects. The scope of work includes the development and execution of mechanical, environmental, and performance test plans required for 417 SCMS GUEA approval. To ensure strict compliance with Drawing DAA3222P501-241, the contractor will utilize mechanical stress, pressure testing equipment, and environmental testing chambers, ultimately delivering comprehensive test reports and approved qualification data. Managed by the Department of Defense under agency FA8203 Afsc Pzaab, this opportunity falls under NAICS code 541380. The solicitation was posted on November 9, 2026, with a response deadline set for November 30, 2026.

POSTED

DEADLINE

Radiographic Testing and Certification for Special Emphasis MaterialThis subcontract for Navsup Weapon Systems Support Mech involves providing comprehensive radiographic testing and material analysis for prime contractors. The scope of work includes performing 100% radiography and quantitative chemical and mechanical analysis of alloys in accordance with T9074-AS-GIB-010/271, as well as verifying sealing surfaces and O-ring grooves per GAC standards. All deliverables, including material certification reports and radiographic films, must be submitted via the Wide Area Workflow system. To qualify for this engagement, personnel must hold NDT Level II or III Certification. The project falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties should note the response deadline of December 18, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

F103--D AND D LABORATORY STEAM & WATER TESTING

Solicitation # 36C24627Q0096

The Department of Veterans Affairs, Network Contracting Office 6, is soliciting quotes for laboratory steam and water testing services to support the Durham VA Medical Center and its Community Based Outpatient Clinics in Greenville and Garner, North Carolina. This requirement is a total set-aside for certified Veteran-Owned Small Businesses (VOSB). The scope of work involves monthly sampling and testing of critical and utility water systems to ensure compliance with standards for sterile processing services. Required tests include analysis for bacteria, endotoxins, pH, conductivity, alkalinity, and total hardness. The contract includes a base period from November 10, 2026, to November 9, 2027, with multiple option periods extending through November 9, 2031. Award will be based on the Lowest Price Technically Acceptable (LPTA) offer. Technical evaluations will focus on the offeror's management approach, capability to perform, and a history of at least two similar contracts completed within the last three years. Past performance will be assessed based on customer satisfaction and responsiveness. Successful contractors must submit a Quality Assurance Plan within 30 days of award and utilize the OB10 e-Invoicing network for monthly payments in arrears. The final deadline for the receipt of offers is November 20, 2026, at 9:00 AM EST.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

25-282903.FMD.StatewideLegionellaTesting

Solicitation # CR-25-282903

The California Department of General Services, Facilities Management Division is soliciting bids for statewide Legionella sample collection, laboratory testing, analysis, and reporting services across the Northern, Bay, and Southern regions. This three-year contract requires the contractor to provide all necessary labor, equipment, and safety materials to maintain state buildings and grounds in accordance with the California Building Standards Code. Key deliverables include emailing laboratory results within 48 hours of receipt and submitting final survey reports in a detailed space-by-space and material-by-material format within 15 working days of completion. The contract will be awarded to the lowest responsive and responsible bidder, with a 5 percent preference applied to certified California Small Businesses. Strict personnel qualifications are mandatory, requiring at least one Competent Professional and one Competent Technician as defined by the AIHA Technical Framework: Legionella (2020), as well as a Certified Industrial Hygienist (CIH) through the Board of Global Credentialing to direct the work. Additionally, all utilized laboratories must hold ELITE certification and AIHA EMLAP accreditation. Compliance requirements include a 3 percent Disabled Veteran Business Enterprise participation goal, registration with the Department of Industrial Relations, and adherence to prevailing wage rates. Bidders must maintain general liability insurance of at least 1 million dollars per occurrence and provide a one-year warranty from the date of acceptance. Sealed bids must be submitted by November 23, 2026, at 2:00 PM, and must include all mandatory certifications and references to avoid rejection.

California Department of General Services

POSTED

DEADLINE

Sludge Analysis and Laboratory TestingThis subcontract for the St. Tammany Parish Government involves providing specialized laboratory analysis and testing of sewer sludge for prime contractors working on wastewater projects. The selected provider will be responsible for the sampling and analysis of biosolid cakes at the Westwood and Cross Gates facilities, ensuring all processes adhere strictly to EPA Protocols. The scope of work requires the use of certified laboratory facilities and specialized sampling equipment to deliver official reports on the composition and safety of the biosolids. To qualify for this engagement, the contractor must possess the necessary laboratory and operator certifications. The opportunity was posted on November 9, 2026, with a response deadline of December 8, 2026. This project falls under NAICS code 541380, focusing on testing laboratories.

St. Tammany Parish Government

POSTED

DEADLINE

Textile Quality Assurance and InspectionThis subcontract for Textile Quality Assurance and Inspection involves performing quality audits for prime contractors on International Labour Organization apparel projects located in Madagascar. The scope of work focuses on technical evaluations, including dimensional sizing checks, color fastness testing, and seam strength testing, to ensure all products meet established standards. Qualified providers must hold ISO 9001 or textile-specific quality certifications to be eligible. The primary deliverables for this engagement are detailed quality inspection reports and formal certifications of compliance.

POSTED

DEADLINE

Seed Quality Assurance and InspectionThis subcontract for Seed Quality Assurance and Inspection involves providing independent third-party inspection services for prime contractors delivering FAO supply contracts within Sudan. The scope of work focuses on ensuring the quality and quantity of seeds through rigorous sampling, germination testing, and moisture content analysis. Additionally, the contractor is responsible for verifying that all packaging and labeling adhere to established specifications. The primary deliverables for this engagement include the issuance of inspection certificates and detailed quality verification reports. Operating under NAICS code 541380, the project is managed by the FAO and requires all performance activities to be conducted on-site in Sudan.

FAO

POSTED

1 day ago

DEADLINE

N/A

AI Contract Overview

The City of Spokane is seeking a subcontractor for Independent Inspection and Code Compliance Testing. The primary objective of this contract is to provide third-party inspection and verification services to ensure that an installed system fully complies with the International Building Code, WISHA regulations, and all specific contract requirements. This opportunity was posted on September 3, 2024, with a response deadline of September 30, 2024. The project falls under NAICS code 541380, focusing on testing laboratories. Interested parties can find further details and submission guidelines through the City of Spokane's procurement portal.