Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Independent Quality Inspection and Code Compliance Verification

Active

Federal

Response Deadline07/27/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails third-party inspection and verification of installed insulation to ensure full compliance with the Arkansas 2014 Energy Code, specifically within Climate Zone 3, and adherence to required R-value specifications. The scope includes conducting thorough on-site evaluations to confirm that insulation materials and installations meet performance standards, with comprehensive documentation prepared for official government acceptance and regulatory review. This verification process is critical to validating energy efficiency and regulatory alignment for public or federally funded projects in the specified region. This is a total small business set-aside subcontract under NAICS code 541370, reserved exclusively for small businesses as defined by the Small Business Administration. The solicitation was posted on July 8, 2026, with responses due by July 27, 2026. The place of performance is confined to Booneville, Arkansas, 72927, with the contracting activity managed by the Department of Agriculture through its FPAC Business Center Acquisition Division. The work requires precise technical expertise in energy code compliance and documentation practices, and successful bidders must be equipped to deliver timely, audit-ready reports that support federal compliance and inspection protocols.

General Info

Small business set-aside for insulation compliance inspection in Booneville, Arkansas, per 2014 Energy Code.

Agency

Department Of Agriculture → Fpac Bus Cntr-Acq DivisionView Agency

NAICS

541370 - Surveying and Mapping (except Geophysical) ServicesView NAICS

Place of Performance

Booneville, AR, 72927, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 8

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 09:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → Fpac Bus Cntr-Acq Division

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → Fpac Bus Cntr-Acq Division

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Third-party inspection and verification of installed insulation for compliance with Arkansas 2014 Energy Code, Climate Zone 3, and R-value specifications. Includes documentation for government acceptance.

Similar Contracts

Same NAICS industry code

Survey and Mapping Services IDIQThe Port of Seattle is seeking qualified firms or teams to provide Survey and Mapping Services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract, with solicitation details posted on July 20, 2026. All survey work must adhere strictly to designated geodetic datums: the Seattle-Tacoma International Airport Grid System or NAD83 for airport properties, and NAD83 or Seattle Tidelands for seaport properties. Vertical measurements must follow NGVD 29, STIA Vertical Datum, MLLW, or NAVD88 as specified, with any deviation requiring written approval from the Port Manager of Survey and Mapping. The work must comply fully with the Washington Administrative Code and Revised Code of Washington regarding the practice of land surveying, ensuring legal and technical accuracy across all projects. Consultants will operate under the supervision of the Port Manager of Survey and Mapping Services or their designated representative, delivering both field and office-based support services including on-site surveying and mapping. The contract is managed by the Port’s Construction Management division, with primary point of contact Hala Rabbo available via email and phone for inquiries, and Ann Davidson serving as Project Manager. Proposals are to be submitted in response to this forecasted opportunity, with performance expected across Port facilities throughout the region, though specific locations are not yet defined. All work must align with the Port’s established standards and regulatory frameworks to ensure consistency and compliance.

Construction Management

POSTED

about 6 hours ago

DEADLINE

RFQ PARKS-On-Call Surveying Consultants for Parks & Recreation ProjectsThe City of Issaquah Parks and Community Services Department is seeking to establish an on-call contract with up to two qualified survey consulting firms to provide specialized surveying services for parks and recreation projects. These services may be required to support larger capital initiatives or address isolated engineering needs, with work being issued through individual task orders following the format outlined in Professional Services Agreement Attachment C. The volume of work and number of hours per task order will vary based on project demands, and the City does not guarantee any minimum level of activity or commitment to issue task orders. Firms must be prepared to respond flexibly to unpredictable needs across a range of technical specialties to ensure comprehensive coverage for the department's requirements. The solicitation, numbered Parks-07.20.2026, was posted on July 20, 2026, with responses due by August 7, 2026. Interested firms must submit proposals by the deadline, and all work will be performed within the state of Washington. Primary contact for inquiries is Robin Spear, reachable via email or phone, and additional details are available through the public purchase portal. The contract is open to qualified consultants without specific set-aside provisions, and evaluation will focus on the ability to deliver high-quality, timely surveying services tailored to the City’s parks and recreation infrastructure needs.

City of Issaquah

POSTED

about 7 hours ago

DEADLINE

B--BLM ID AML DIGITAL INVENTORYThis contract, identified as BLM ID AML DIGITAL INVENTORY under solicitation number 140L2626Q0045, is a Firm Fixed-Price acquisition issued by the Bureau of Land Management’s Idaho State Office within the Department of the Interior, targeting a Total Small Business Set-Aside under NAICS code 541370 for special studies and analysis related to environmental assessments. The work involves utilizing LiDAR technology to digitally inventory, spatially document, field validate, and risk-rank abandoned mine land features such as shafts, adits, waste rock dumps, mill tailings, and prospect pits across Idaho, adhering to national BLM data standards and the Abandoned Mine Site Cleanup Module schema. The contractor is required to provide all labor, supplies, and equipment necessary to deliver a finalized Abandoned Mines Feature spreadsheet and BLM-approved metadata, ensuring accuracy and conformity in all submissions. Performance is scheduled from August 3, 2026, through June 30, 2027, with work conducted during standard business hours Monday through Friday, excluding federal holidays, and any off-hours work requiring prior written approval from the Contracting Officer. The place of performance is in Boise, Idaho, and deliveries must be made FOB Destination. The solicitation mandates that all proposals be submitted via email to charles_dodson@ios.doi.gov by July 21, 2026, and must include a detailed cost breakdown separate from the technical proposal, outlining labor hours, per diem, and equipment expenses. Technical proposals must demonstrate the offeror’s staff organization, methodology, proposed timeline, and prior experience with similar government contracts, while also addressing key questions raised by the scope. Evaluation is based on best value using a trade-off approach, considering technical capabilities, applicant qualifications, past performance, and price — with pass/fail gates for ability to perform field work within the timeline and RFQ compliance. The Contracting Officer, Charles Dodson, holds sole authority over contract modifications and acceptances, while a designated Contracting Officer’s Representative will oversee technical performance. Payment must be submitted electronically through the Treasury’s Internet Payment Platform, requiring a copy of the company invoice as an attachment, and contractors must be registered in SAM with up-to-date representations and certifications, including small business status and compliance with drug-free workplace, whistleblower protections, labor standards, and equal opportunity requirements. All contractors must also comply with security protocols involving Standard Form 312 and

Idaho State Office

POSTED

about 11 hours ago

DEADLINE

Surveying and Layout ServicesThis contract solicits surveying and layout services to establish site control points, conduct grading layout, and position structural elements for a project under the Department of Defense. The work is scoped to ensure precise spatial alignment and construction readiness at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is classified as a subcontract under NAICS code 541370, indicating it falls within the professional, scientific, and technical services sector focused on surveying. Interested parties must submit responses by the deadline of July 30, 2026, and the opportunity was posted on July 19, 2026, through the DIBBS platform. There is no set-aside designation specified, and the agency responsible is the Land Supply Chain under the Department of Defense.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Quality Assurance & Inspection ServicesThe contract requires independent quality verification and sampling inspections conducted in accordance with MIL-STD-1916 or ASQ Z1.4 standards to ensure product conformity and compliance with defense specifications. It mandates the preparation of Certificates of Conformance with full origin inspection compliance, ensuring traceability and documentation integrity throughout the supply chain. The work is under a subcontract classified as a Women-Owned Small Business Set-Aside, with the NAICS code 541370 indicating engineering and technical services related to quality assurance and inspection. Performance is to be carried out at Hill Air Force Base, Utah, with a response deadline of July 30, 2026, and the solicitation posted on July 19, 2026. The contracting entity is the Fluid Handling Division within the Department of Defense, focusing on procurement activities that support critical military systems and components.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Surveying and Geotechnical ServicesThe contract seeks comprehensive surveying and geotechnical services for construction planning, including topographic and boundary surveying along with subsurface soil testing to support site development. The work is specifically intended for performance in Texarkana, with a zip code of 75507-5000, and is classified under NAICS code 541370 for surveying services. This is a subcontract opportunity set aside entirely for small businesses under the SBA's Total Small Business Set-Aside provisions, ensuring only eligible small business entities may respond. The solicitation was posted on July 19, 2026, with a firm response deadline of July 30, 2026, and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. All proposals must be submitted through the DIBBS platform using the provided RFQ link to be considered valid.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Marking, Labeling, and Barcoding ServicesThe contract requires the application of military-standard markings, including container labels, UID labels, and 2D Data Matrix barcodes, in full compliance with MIL-STD-129 and MIL-STD-130N to ensure accurate traceability and proper identification of shipments within the Department of Defense supply chain. All work must adhere strictly to these specifications to guarantee interoperability, logistics efficiency, and regulatory compliance across military logistics operations. The performance location is designated as Tinker Air Force Base with a ZIP code of 73145-8000, and the solicitation is categorized as a subcontract under NAICS code 541370, indicating professional, scientific, and technical services related to technical consulting and support. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, requiring timely submission of proposals from qualified vendors. The contracting organization is the ASC Commodities Division under the Department of Defense, emphasizing the critical nature of this work for defense logistics. Although no set-aside status is specified, the requirement is tied to a specific DoD facility and involves highly regulated labeling protocols that demand proven experience with federal military standards. Interested parties must access the full solicitation via the provided DIBBS link to submit bids and ensure alignment with all technical and procedural requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Surveying and Layout ServicesThe contract seeks qualified providers to deliver surveying and layout services for infrastructure projects under Hennepin County’s jurisdiction in Minnesota. The scope includes establishing precise control points, layout work for grading and structural elements, and as-built verification to ensure construction aligns with design specifications. All work must meet high standards of accuracy and documentation to support project integrity and regulatory compliance. The opportunity is structured as a subcontract, with a submission deadline of August 11, 2026, and falls under the NAICS code 541370 for geophysical surveying services. Interested parties must respond through the designated portal prior to the deadline to be considered for award.

Hennepin County

POSTED

DEADLINE

Surveying and Layout ServicesThe contract is for Surveying and Layout Services to establish site control points, accurately lay out structures, and conduct as-built verification throughout the duration of construction. The work requires precise geospatial measurements and documentation to ensure all elements are positioned according to design specifications and regulatory standards. The services will be critical to maintaining alignment, safety, and compliance across all phases of the project. This is a subcontract opportunity under NAICS code 541370, posted on July 17, 2026, with a response deadline of August 5, 2026. The contracting entity is the State of Utah, and performance is expected to occur within the state, though specific location details are not provided. Interested parties must submit proposals before the deadline to be considered for award, and no set-aside classification or organizational type restrictions are indicated.

POSTED

DEADLINE

Site Surveying and Layout for Sign InstallationThe contract titled Site Surveying and Layout for Sign Installation requires the performance of field surveys to determine the most effective locations for sign placement, verify all dimensional specifications, and produce detailed layout plans for installation teams. The work is critical to ensuring signs are installed in compliance with design requirements and regulatory standards, with outcomes directly supporting the efficiency and accuracy of on-site installations. All tasks must be carried out with precision to support downstream construction and placement efforts without delays or rework. This subcontract is solicited by OC Community Resources under the California state agency structure, with a North American Industry Classification System code of 541370, indicating it falls under professional, scientific, and technical services related to architectural and engineering activities. The proposal submission deadline is August 14, 2026, at 9:00 AM, and while specific location details such as city, state, or zip code are not provided, the place of performance is implied to be within California. The opportunity is publicly accessible via the OpenGov procurement portal, with no set-aside preferences indicated, and no point of contact information included in the posted data.

OC Community Resources

POSTED

DEADLINE

Surveying and Site Measurement ServicesAustin Community College is seeking subcontractors to provide comprehensive surveying and site measurement services across its campuses to support design and construction initiatives. The contract requires execution of topographic, boundary, and construction layout surveys with precision and timeliness to ensure accurate planning and implementation of infrastructure projects. Services must align with industry standards and accommodate the dynamic needs of campus development, from initial site analysis through active construction phases. The solicitation is categorized under NAICS code 541370 for surveying and mapping services and is open as a subcontract opportunity through the Texas SmartBuy portal. The proposal deadline is August 7, 2026, at 6:00 PM, with the opportunity posted on July 17, 2026. There is no specified set-aside designation, and the work is to be performed across various ACC campuses in Texas without a defined primary location. Interested parties must submit responses through the provided portal and demonstrate proven experience in delivering high-quality surveying services in educational or public infrastructure environments.

AUSTIN COMMUNITY COLLEGE ACC

POSTED

DEADLINE

Record Drawing Preparation (As-Built Documentation)The contract involves the preparation of record construction drawings that accurately reflect as-built conditions for mechanical, electrical, and ductwork systems using CAD and BIM technologies. This work is essential for documenting the final installed configurations of building systems after construction, ensuring future maintenance, renovations, and compliance efforts are based on precise and up-to-date information. The deliverables must demonstrate high accuracy and detail, aligning with industry standards for as-built documentation in building infrastructure projects. The opportunity is a subcontract under the City of Dallas, classified under NAICS code 541370, which pertains to architectural, engineering, and related services. The solicitation was posted on July 17, 2026, with a response deadline of August 7, 2026. Work is to be performed in Texas, though the specific city and address are not detailed in the provided data. Interested parties must submit their proposals through the City of Dallas’s Bonfire Hub portal before the deadline to be considered for award. The contract does not indicate any set-aside preferences or organizational type restrictions.

POSTED

DEADLINE

More opportunities from Department Of Agriculture → Fpac Bus Cntr-Acq Division

Same awarding agency

Chevy 3500 Knapheide Topper and Installation for USDA NRCS- Boise, IDThe U.S. Department of Agriculture’s Natural Resources Conservation Service in Boise, Idaho is seeking a firm fixed-price contract for the purchase and installation of a Knapheide brand topper designed to fit over existing utility boxes on a 2024 Chevrolet 3500 Silverado HD, as shown in included photos. This solicitation, numbered 12FPC326Q0041, is issued as a Request for Quotation under FAR Part 12 and serves as the only solicitation document; no separate written solicitation will be issued. Offers must conform to the product specifications detailed in the attached Brand Name Only Product Description document, and the award will be made to the responsible small business offering the best value to the government. The contract is set aside exclusively for 100% small business concerns under NAICS code 336211, with a size standard of 1,000 employees. Delivery and installation must occur within approximately 60 days of contract award, with local preference given to vendors within 100 miles of Boise, Idaho. The government will handle transportation of the vehicle to and from the installation site, though this arrangement is negotiable. The solicitation closed on July 30, 2026, with quotations due by 9:00 PM Eastern Time. The point of contact for this acquisition is Ms. C. Thomas, and offers are to be submitted through the SAM.gov platform. All responsible small business sources are encouraged to respond, and the procurement is managed by the USDA’s acquisition division based in Washington, D.C., with performance localized in Boise, Idaho.

Motor Vehicle Body Manufacturing

POSTED

about 11 hours ago

DEADLINE

EWP Streambank Stabilization McDowell County, WV.The USDA-NRCS is soliciting bids under the Emergency Watershed Protection Program for streambank stabilization work in McDowell County, West Virginia, to restore stream capacity by removing obstructive materials and stabilizing erosion-prone areas that threaten structures. The contractor must supply all labor, equipment, materials, transportation, and supervision required to complete the project in full compliance with federal, state, and local construction, safety, and labor regulations. The contractor assumes full responsibility for their equipment and will bear the cost of any loss or damage due to theft or vandalism, and is required to properly remove and dispose of all debris and excess materials from the site. The work is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision, with the NAICS code 237990. A site visit is scheduled for July 21, 2026, at 10:30 AM ET at the paved parking lot near the Rt. 52 bridge over Spice Creek, with GPS coordinates 37.4451661, -81.702033, and is strongly recommended although not mandatory. Proposals are due by August 4, 2026, at 6:00 PM ET, with primary point of contact Bobby Copenny at 817-509-3503 and Bobby.Copenny@usda.gov, and additional inquiries can be directed to Joe Wickline at joseph.wickline@usda.gov or 681-220-5765. The contract is managed by the Department of Agriculture through the FPAC Business Center Acquisition Division and is posted on SAM.gov.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Insulation replacement at the NRCS-AR PMCThis solicitation, numbered 12FPC126Q0025, is a combined synopsis and solicitation for a firm-fixed-price contract to perform insulation replacement at the NRCS Equipment Shop at the Booneville, Arkansas Plant Materials Center. The work involves removing approximately 2,360 square feet of existing 3-inch vinyl-backed fiberglass insulation from ceiling and wall surfaces above eight feet, and replacing it with at least two inches of closed-cell spray foam insulation on the walls and four inches on the ceiling, meeting minimum R-value requirements of R-5/10 and R-30 respectively using “Foam it Green Slow Rise Foam” or an approved equivalent. The project must comply with the Arkansas 2014 Energy Code for Climate Zone 3, include hazard mitigation for mold or other contaminants discovered during removal, and require full protection of equipment and surfaces from overspray. All work must be completed by September 30, 2026, and performance is designated for the facility located at 6883 South State Highway 23, Booneville, AR 72927, though the place of performance is broadly stated as throughout Arkansas. The contract is subject to the Davis-Bacon Act and requires adherence to specified wage determinations. The solicitation is a total small business set-aside, exclusively reserved for Women-Owned Small Businesses (WOSB) and Economically Disadvantaged Women-Owned Small Businesses (EDWOSB), with a NAICS code of 238310 and a size standard of $19.0 million. Offerors must be currently registered and active in SAM.gov and provide proof of registration with their submission. Proposals must be submitted electronically via email to Paige Appelt by the deadline of July 27, 2026 at 5:00 p.m. ET, on company letterhead, signed and priced, and must include evidence of compliance with specifications and SAM registration. Awards will follow a Lowest Price Technically Acceptable (LPTA) evaluation process, where offers must meet pass/fail criteria for technical acceptability and past performance (acceptable or neutral), with the lowest-priced acceptable offer selected. Invoices must be submitted electronically via the Treasury’s IPP system, and payment may be made via Government purchase card. The contractor must submit a proposed project plan and material list within five business days of award, and a weekly status report every Friday by 3:00 p.m. EDST

Drywall and Insulation Contractors

POSTED

DEADLINE

NRCS- National Water and Climate Center (NWCC) SCAN MaintenanceThe Contractor is required to provide comprehensive maintenance services for the Soil Climate Analysis Network (SCAN) in support of the NRCS-National Water and Climate Center, ensuring the continued operation of over 200 nationwide stations that collect critical environmental data. These stations gather hourly measurements of soil moisture and temperature at five standard depths, as well as air temperature, relative humidity, solar radiation, wind speed and direction, and liquid precipitation, all critical for agricultural analysis and natural resource conservation efforts. The scope of work includes furnishing all necessary personnel, equipment, supplies, materials, and incidentals to sustain the network’s functionality in accordance with the attached work statement. This solicitation, numbered 12FPC326Q0038, is a total small business set-aside under NAICS code 811210, open for responses until July 29, 2026, and managed by the U.S. Department of Agriculture through the FPAC Business Center Acquisition Division located in Washington, DC. The contract is issued under a combined solicitation type and all performance obligations are to be carried out in support of the national SCAN infrastructure, with no specific place of performance identified beyond nationwide station maintenance. Amy J Smith, Contract Specialist, serves as the primary point of contact for inquiries, with responses required to be submitted through the designated SAM.gov portal.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Industrial Gases for National Soil Survey Center (NSSC) – Kellogg Soil Survey Laboratory (KSSL)This contract is for the procurement of industrial gases to support the National Soil Survey Center at the Kellogg Soil Survey Laboratory in Lincoln, Nebraska, under solicitation number 12FPC126Q0033. The period of performance begins on September 10, 2026, and extends through September 9, 2027, with the potential for four additional one-year option periods. The solicitation is exclusively set aside for small businesses as defined under FAR 19.5, and the North American Industry Classification System code is 325120, indicating the focus on industrial gas manufacturing. All proposals must be submitted by July 31, 2026, and the combined synopsis and solicitation includes a price schedule and statement of work to guide vendor responses. The contract is managed by the USDA’s FPC Business Center Acquisition Division, headquartered in Washington, D.C., with primary point of contact Paige Appelt and secondary contact Kristina Baker available for inquiries. The place of performance is specifically located in Lincoln, Nebraska, with deliveries and services expected to support laboratory operations at that site.

Industrial Gas Manufacturing

POSTED

DEADLINE

FSA OBBBA Texas TrainingThe U.S. Department of Agriculture’s Farm Service Agency is seeking quotations for lodging, conference space, and audiovisual services for the FSA OBBBA Texas Training event, scheduled for August 25–27, 2026, in College Station, Texas, with participant lodging required from August 24–28, 2026. The solicitation, numbered 12FPC326Q0039, is issued as a combined synopsis and Request for Quotation under FAR Part 12, with no separate written solicitation to follow. The acquisition is unrestricted and fully open to all responsible sources, with no small business set-aside, though the small business size standard is defined as $40 million in annual receipts. The North American Industry Classification System code is 721110, covering accommodations and related services. All services must be provided at a single hotel capable of accommodating approximately 360 participants with integrated meeting and lodging facilities. Proposals must comply with the detailed requirements outlined in the Statement of Work, including provisions for conference support and technical equipment. Questions must be submitted by July 22, 2026, at 12:00 PM EST, and quotations are due by July 29, 2026, at 12:00 PM EST. The Point of Contact for inquiries is Marilyn MacTaggart, reachable at marilyn.mactaggart@usda.gov.

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on July 8, 2026, with a response deadline of July 24, 2026, at 9:00 PM. It is categorized as a subcontract opportunity under a Total Small Business Set-Aside, as defined by FAR 19.5, meaning only small businesses are eligible to compete. The placing agency is the Fpac Bus Cntr-Acq Division within the Department of Agriculture, and the place of performance is specified as Bangor, Maine with a ZIP code of 04401. Despite the contract being listed as a subcontract opportunity, no subcontractor or supplier opportunities can be identified due to a 401 Unauthorized error, which prevents access to the underlying prime contract details necessary for structuring any subcontracting plans or partnerships. As a result, the NAICS code is not available, and the office address and point of contact information are all undefined, leaving potential bidders without critical data to proceed.

POSTED

DEADLINE

Logistics and Field Operations SupportThe contract seeks a small business to provide comprehensive logistics and field operations support for herbicide application crews working across multiple wetland easement sites in Saint Paul, Minnesota. Services include transportation of personnel and equipment, staging of materials at project locations, fueling of vehicles and machinery, and on-site coordination to ensure efficient and safe operations. The work is critical to maintaining wetland health and compliance with conservation goals, requiring precise logistical planning and field-level adaptability to varying terrain and environmental conditions. All activities must adhere to applicable environmental regulations and operational safety standards. This is a total small business set-aside under SBA guidelines, classified under NAICS code 484220 for miscellaneous transportation services, with a response deadline of July 27, 2026, and a posted date of July 8, 2026. The contracting entity is the USDA’s FPAC Business Center Acquisition Division, and performance is strictly limited to the Saint Paul area with a primary zip code of 55101. The nature of the work demands reliable, local-capable vendors familiar with the region’s wetland systems and capable of mobilizing resources promptly across dispersed sites. No specific point of contact is listed, and all inquiries must be directed through the designated federal acquisition portal.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Environmental Compliance and MonitoringThe contract titled Environmental Compliance and Monitoring is a subcontract set aside entirely for small businesses under the SBA Total Small Business Set-Aside program, with a NAICS code of 541620 for environmental consulting services. It requires the performance of comprehensive pre- and post-application environmental assessments centered on agricultural or land-use activities, including rigorous drift monitoring and detailed analysis of impacts on non-target species to ensure full adherence to federal and state environmental regulations. The work is to be performed in Saint Paul, Minnesota, with a zip code of 55101, and the deadline for submissions is July 27, 2026, at 9:00 PM Eastern Time, following a posting date of July 8, 2026. The contracting organization is the Fpac Bus Cntr-Acq Division under the U.S. Department of Agriculture, and while specific point of contact details are not provided, the opportunity is accessible through the SAM.gov platform.

Environmental Consulting Services

POSTED

DEADLINE

Aquatic Herbicide SupplyThe contract seeks the supply of EPA- and state-approved aquatic herbicides, specifically including glyphosate-based formulations enhanced with anti-drift agents, designed for safe and effective use in wetland environments under USDA programs. All products must comply with federal and state environmental regulations and be suitable for application in sensitive aquatic ecosystems, ensuring minimal impact on non-target species and water quality. The herbicides are intended for use in USDA-managed conservation and land management initiatives, requiring strict adherence to application guidelines and environmental safety standards. This is a total small business set-aside subcontract under NAICS code 325320, reserved exclusively for small businesses as defined by the SBA. The solicitation was posted on July 8, 2026, with responses due by July 27, 2026, and the place of performance is designated as Saint Paul, Minnesota, zip code 55101. The contracting entity is the FPAC Business Center Acquisition Division within the Department of Agriculture, which will oversee fulfillment of the supply requirements for ongoing wetland restoration and invasive species control efforts. All vendors must demonstrate the ability to consistently deliver compliant, high-quality herbicide products in accordance with federal procurement standards.

Pesticide and Other Agricultural Chemical Manufacturing

POSTED

DEADLINE

Ground-Based Herbicide Application ServicesGround-based herbicide application services are solicited for managing cattail overgrowth within wetland easements during the 2026 growing season using backpack, truck-mounted, or ATV-mounted sprayers. The work will be performed in Saint Paul, Minnesota, with a response deadline of July 27, 2026, and the opportunity is posted as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to compete. The North American Industry Classification System code for this contract is 561730, which corresponds to waste collection and treatment services, reflecting the environmental management nature of the work. The contracting activity is under the Department of Agriculture, specifically the FPAC Business Center Acquisition Division, and the requirement emphasizes compliance with environmental standards while ensuring effective vegetation control in sensitive wetland areas.

Landscaping Services

POSTED

DEADLINE

Aerial Herbicide Application ServicesThe contract solicits aerial herbicide application services to manage cattail growth on Wetland Reserve Program easements in Minnesota, specifically using aquatically certified herbicides like glyphosate combined with anti-drift agents to ensure precise and environmentally responsible application. The work is targeted at protecting wetland ecosystems by controlling invasive vegetation while minimizing off-target impact, adhering to strict regulatory standards for aquatic use. The services must be performed by a qualified contractor capable of executing aerial operations safely and effectively within sensitive natural areas. This is a Total Small Business Set-Aside subcontract classified under NAICS code 213132, reserved exclusively for small businesses as defined by the SBA. The opportunity was posted on July 8, 2026, with a firm deadline for responses on July 27, 2026, at 9:00 PM Eastern Time. The place of performance is centered in Saint Paul, Minnesota, with the contracting office under the Department of Agriculture’s FPAC Business Center Acquisition Division. All proposals must demonstrate technical capability, compliance with environmental safety protocols, and experience in aerial application of approved herbicides on conservation lands.

POSTED

DEADLINE