This Government Contract opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Industrial Coating and Corrosion Control for Structural Supports

Closed

Federal

Submission Closed10/02/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238320

New

SLED

Interior Trim and Painting ContractorThis subcontract for an Interior Trim and Painting Contractor involves performing interior finishing work for prime contractors on Sharon Housing Trust projects located in Sharon, Connecticut. The scope of work includes trimming interior windows in finished living spaces, painting the trim, and patching or repairing any sheetrock disturbed during the installation process to deliver completed window and door surrounds. Due to the nature of the work in occupied residential units, the contractor is required to hold EPA Lead-Safe Certification. Interested parties must respond to the solicitation by October 30, 2026, as posted by DAS Procurement for the state of Connecticut.

POSTED

DEADLINE

Architectural and Interior FinishesThis subcontract for Architectural and Interior Finishes involves performing architectural repairs and interior finishing services for prime contractors at the East Orange VA Medical Center, specifically within Building 18B. The scope of work includes drywall installation, patching, painting, and flooring repair intended to restore interior surfaces following system upgrades. The ultimate goal of the project is to deliver fully restored architectural surfaces and finished interior spaces for the Department of Veterans Affairs. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238320. To be eligible for the contract, providers must hold a valid State of New Jersey General or Specialty Trade license. The project is managed through the Department of Veterans Affairs Network Contract Office 02 and is located in East Orange, New Jersey.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

MURAL ALLEY DOWNTOWN REVITALIZATION PROJECT

Solicitation # 2027-01 (101584)

The City of Modesto is soliciting bids for the Mural Alley Downtown Revitalization Project, a Clean Cal-funded initiative to repair and refurbish a downtown alleyway. The scope of work includes the installation of concrete, permeable pavers, an archway structure, a roofed trash enclosure, seating, and the renovation of planter walls on 10th Street. Additionally, the project requires the installation of electrical infrastructure, lighting, and signage. The engineer's estimate for the project is 1,500,000 dollars, with a performance period of 98 working days starting approximately in February 2027. Bids must be submitted electronically via the OpenGov Procurement portal by October 20, 2026, at 11:00 am. The contract will be awarded to the apparent low bidder who possesses a valid Class A or B California Contractor's License. Mandatory submission requirements include a bid security of at least 10 percent of the bid amount, Local Hire and Skilled and Trained Workforce Certifications, and compliance with Disadvantaged Business Enterprise goals. The project is subject to prevailing wage requirements and Buy America provisions of the Surface Transportation Assistance Act of 1982. Upon award, the contractor must provide performance and payment bonds for 100 percent of the total contract cost.

POSTED

DEADLINE

Interior and Exterior PaintingThis subcontract opportunity is for interior and exterior painting and surface finishing services to support prime contractors on residential projects for the Cherokee Nation Housing Authority. The scope of work includes comprehensive surface preparation, priming, and the painting of walls, ceilings, and trim to deliver fully finished surfaces. All work will be performed within Wagoner County. Interested parties must hold a valid RRP Lead-Based Paint/Renovation Firm certification to be eligible. The solicitation was posted on October 9, 2026, and requires a response by the deadline of October 30, 2026. This project falls under NAICS code 238320.

Cherokee Nation Housing Authority

POSTED

DEADLINE

Specialized Marine Coatings and WaterproofingThis subcontract for Specialized Marine Coatings and Waterproofing involves providing protective coatings and waterproofing services for Illinois Capital Development Board lock projects located at Lock 33 in Sheffield. The scope of work includes surface blasting, cleaning, the application of polyurethane or epoxy coatings, and the installation of waterproofing membranes on steel and concrete surfaces to ensure all lock surfaces are sealed and protected. The project is managed by the Chief Procurement Officer for the Capital Development Board of Illinois. All participating contractors must adhere to the Project Labor Agreement. The solicitation was posted on October 9, 2026, with a response deadline of November 10, 2026.

Chief Procurement Officer for Capital Development Board

POSTED

DEADLINE

Interior and Exterior Potable Water Coating ApplicationThis subcontract involves the application of protective coatings and linings for potable water tank projects for the City of Huntsville. The scope of work includes applying interior linings and exterior coatings to the tanks, as well as coating all associated piping and supports. To ensure safety and quality, all materials used must be NSF 61 compliant and applied according to the specific methods mandated by the manufacturer. The contractor is responsible for providing the necessary inspection equipment to verify warranties and must deliver a fully completed and coated potable water tank system. This opportunity is categorized under NAICS code 238320, with a response deadline set for October 27, 2026.

POSTED

DEADLINE

Interior and Exterior Metal Abrasive BlastingThis subcontract involves providing interior and exterior metal abrasive blasting services for potable water storage tank projects for the City of Huntsville. The scope of work requires blasting all metal surfaces, including piping, equipment, and supports, down to bare metal. To ensure safety and environmental compliance, the contractor must utilize shroud containment systems and manage visible emissions and particulate matter in accordance with TCEQ Title 30 and SSPC-PA Guide 3. The selected contractor is responsible for providing all necessary abrasive blasting equipment, ventilation, and dehumidification systems to achieve the required surface finish. This opportunity is categorized under NAICS code 238320, with a response deadline set for October 27, 2026.

POSTED

DEADLINE

Bid NO. 27-05 Autumn Road Half Million Gallon Ground Storage Tank Restoration

Solicitation # 27-05

Bid NO. 27-05 is a solicitation issued by the City of Huntsville, Texas, for the restoration of a half-million gallon potable water ground storage tank located at 3391 Autumn Road. The scope of work involves comprehensive surface preparation, coating, and lining of both interior and exterior surfaces, including associated piping and equipment. Key technical requirements include blasting all metal to bare, performing approximately 250 pit welds deeper than 1/8 inch, replacing 10 rafters, and installing four new roof vents. All interior coatings must comply with National Sanitation Foundation (NSF) Standard 61, and the vendor must adhere to OSHA safety standards and TCEQ regulations regarding air pollution and abrasive blasting. The contract will be awarded based on best value, evaluating product durability, vendor performance, and technical experience rather than price alone. Bids must be submitted in sealed envelopes by October 27, 2026, and must include a bid bond for 10 percent of the submitted amount. The successful vendor will be required to provide a full payment bond, a quality control plan, and comprehensive insurance coverage, including Commercial General Liability of at least 1 million dollars per occurrence. The period of performance is 60 calendar days from the date of award, with a mandatory first-anniversary inspection to ensure the paint system remains free of rust, peeling, or poor adhesion. Payments are processed Net 30 days following the receipt of correct invoices.

POSTED

DEADLINE

Specialized Industrial Coating ApplicationThis subcontract for Specialized Industrial Coating Application involves the application of multi-coat interior and exterior protective coating systems for water tank projects within the Region of Peel. The scope of work requires the contractor to perform comprehensive surface preparation and the application of industrial coatings to exterior structures and potable water contact surfaces. All work must be executed using industrial spray equipment in strict accordance with AWWA D102 standards to ensure a fully coated finish backed by manufacturer warranties. The opportunity is categorized under NAICS code 238320 and was posted on October 8, 2026. Interested parties must submit their responses by the deadline of November 2, 2026, at 5:00 PM. This project is designed for subcontractors working under prime contractors to deliver specialized protective services for the Region of Peel.

POSTED

DEADLINE

Interior Finishing and Painting SubcontractorThis subcontract for Interior Finishing and Painting involves providing specialized wall repairs and floor painting services for prime contractors working on State of Utah DFCM facility projects. The scope of work specifically includes the cutting and patching of walls required for elevator installations, as well as the application of industrial paint to machine room floors, all performed according to standard commercial painting and finishing guidelines. The project is categorized under NAICS code 238320 and is managed by the state of Utah. Interested parties must adhere to the established timeline, with the solicitation posted on October 8, 2026, and a response deadline set for November 4, 2026. The final deliverables consist of fully patched and painted walls and a completed industrial finish for the designated machine room flooring.

POSTED

DEADLINE

Residential Painting ContractorThe Residential Painting Contractor subcontract involves providing interior painting services for prime contractors working on Region of Peel housing projects. The scope of work includes comprehensive surface preparation and the application of Benjamin Moore paint, ensuring all results align with Peel Living specifications. To maintain quality and safety standards, all work must strictly adhere to the guidelines set forth in the MPI, NACE, and SSPC manuals to deliver professional finished interior surfaces. This opportunity is categorized under NAICS code 238320 and was posted on October 8, 2026. Interested parties must submit their responses by the deadline of November 2, 2026, at 5:00 PM. The contract is managed by the Region of Peel, and further details can be accessed through the official bids and tenders portal.

POSTED

DEADLINE

Interior Painting and DrywallThis subcontract opportunity involves providing comprehensive interior painting and drywall services for restaurant rehabilitation projects within the City of Newport News, Virginia. The scope of work includes the installation, taping, and sanding of drywall for interior walls and ceilings, concluding with the application of washable, commercial-grade paints specifically required for food service environments. The selected contractor will be responsible for delivering fully finished and painted interior surfaces while working under prime contractors. The project is categorized under NAICS code 238320 and was posted on October 8, 2026. Interested parties must submit their responses by the deadline of November 10, 2026. All work is to be performed locally within the City of Newport News to support the city's infrastructure and facility improvements.

City of Newport News

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

This subcontract for Industrial Coating and Corrosion Control for Structural Supports supports prime contractors on NAVSUP Weapon Systems Support projects in Philadelphia. The scope of work involves providing protective coatings and anti-corrosive finishes for structural support units, utilizing surface preparation methods such as sandblasting and cleaning. All applications must adhere to military-grade industrial coatings and primers per MIL-SPEC standards, employing industrial spray equipment and curing ovens to deliver finished products. The opportunity is categorized under NAICS code 238320 and is issued by the Department of Defense. It was posted on September 2, 2026, with a response deadline of October 2, 2026, at 8:30 PM.

General Info

DoD subcontract for industrial coating and corrosion control on Philadelphia structural support projects.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

238320 - Painting and Wall Covering Contractors

Place of Performance

Set-Aside

NONE

Documents

This scope was carved out of N0038326QFB33.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

15--SUPPORT,STRUCTURAL, IN REPAIR/MODIFICATION OF

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 2

subcontract

Response DeadlineOct 2

Deadline has passed

Submission Closed

10/02/2026, 08:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies and applies protective coatings and anti-corrosive finishes for prime contractors on NAVSUP Weapon Systems Support Philadelphia projects. Performs surface preparation via sandblasting and cleaning, and applies military-grade industrial coatings and primers per MIL-SPEC standards using industrial spray equipment and curing ovens. Delivers finished, coated structural support units.