Top

Industrial Gas Supply for Aerospace Maintenance

Active

Federal

Response Deadline10/19/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → FA8213 Aflcmc EbhkView Agency

NAICS

325920 - Explosives ManufacturingView NAICS

Place of Performance

UT, USA

Set-Aside

NONE

Documents

This scope was carved out of FA821326R3053.

The full solicitation package (15 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

F-117 CAD/PAD

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 17

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 08:00:00 PM UTCin 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → FA8213 Aflcmc Ebhk

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8213 Aflcmc Ebhk

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply and deliver industrial gases such as nitrogen, oxygen, and argon for aircraft maintenance, testing, and repair operations at Hill AFB.

Similar Contracts

Same NAICS industry code

NAICS: 325920

New

Federal

Thin Layer Explosives (TLX)

Solicitation # W519TC26RA057

POSTED

DEADLINE

MT32 or MD98 Rocket Motor

Solicitation # W519TC26R0030

The solicitation W519TC-26-R-0030 seeks a single Firm Fixed Price award for the procurement of either the MT32 or MD98 rocket motor, identified by their respective NSNs and part numbers, with the response deadline extended to 21 August 2026 at 2:00 P.M. CDT. This RFP is restricted to a limited number of qualified sources as permitted under 10 U.S.C. 3204(a)(1) and FAR 6.103-1(b), and only offerors who can provide a valid Qualification Acceptance Letter or government-approved equivalent, signed by an authorized Government engineer, will be eligible for award. All other terms and conditions of the original solicitation remain unaffected. The procurement is managed by the Department of Defense through the W6QK Acc-Ri office located in Rock Island, Illinois, with primary point of contact Alyson Bigham and secondary contact Emily Kundel available for inquiries.

POSTED

DEADLINE

Design and Construction of a Modernized Industrial Wastewater Treatment Facility (Bioplant) at Radford Army Ammunition Plant (RFAAP)

Solicitation # W519TC-26-R-BIOR

The Radford Army Ammunition Plant (RFAAP) is a critical national security facility and the last remaining CONUS government-owned site capable of producing a full spectrum of military propellants, including nitrocellulose, nitroglycerin, single-base, multi-base, and solventless formulations. The facility’s legacy wastewater treatment plant, constructed in the 1980s, is now beyond its operational lifespan and functions as a single point of failure, severely compromising mission continuity. Located within the 100-year floodplain, it suffered a forced shutdown during Hurricane Helene in 2024, underscoring its vulnerability. The aging system has also failed to meet regulatory limits under the Virginia Pollutant Discharge Elimination System (VPDES) permit, recording 14 violations in 16 months primarily due to inadequate treatment of biochemical oxygen demand and other propellant residuals. To mitigate these risks and ensure compliance, the U.S. Army is accelerating funding to replace the facility by FY26 through an Other Transaction Authority (OTA) under 10 U.S.C. § 2808a. This initiative seeks to design and construct a modernized, resilient industrial wastewater treatment facility capable of handling 1.5 million gallons per day with a 2.5 MGD surge capacity, incorporating advanced technologies to treat complex chemical effluents while meeting Virginia Department of Environmental Quality standards. The procurement is structured as a two-phase effort, beginning with a competitively awarded OTA for detailed design and pilot testing, with the potential for a follow-on noncompetitive contract to execute site preparation, construction, commissioning, and transition under the same statutory authority if successful outcomes are achieved. Proposals must be submitted in four clearly defined volumes—Technical, Schedule, Price, and Miscellaneous—with strict page limits and formatting requirements, and must be uploaded exclusively via DoD SAFE before the August 20, 2026 deadline. Evaluation is based on three weighted factors: first, specialized bioplant experience including technological feasibility and integration of systems engineering principles; second, schedule realism and risk assessment demonstrated through an Integrated Master Schedule with critical path analysis; and third, price reasonableness and proposed cost share. The contract requires adherence to multiple standards including ASTM, UFC, UFGS, OSHA, and MIL-STDs, with deliverables spanning system requirements, pilot test reports, design packages, commissioning plans, as-built documentation, and O&M manuals. Security protocols mandate CUI training, encrypted

POSTED

DEADLINE

Solicitation # W519TC26RA058

Solicitation W519TC26RA058 is a Request for Proposal issued by the Department of Defense, specifically the Army Contracting Command Rock Island, for the procurement of MD65 and MD66 impulse cartridges. This unrestricted solicitation seeks a single Firm Fixed Price award for the production of 31,500 units of MD65 and 16,149 units of MD66, alongside requirements for First Article Testing (FAT) and Lot Acceptance Testing (LAT). The contract includes technical specifications for Ammunition Data Cards (ADC) in accordance with MIL-STD-1168 and detailed marking requirements for Cartridge Actuated Devices and Propellant Actuated Devices (CAD/PAD) to ensure compliance with DoD Unique Identification policies. Amendment 0001 has been issued to correct FOB details and provide alternative proposal submission methods via email or DOD Safe for those without PIEE access. The contract involves complex technical and quality standards, including radiographic examination requirements under ASTM E1742 and adherence to various product-specific specifications such as MIL-DTL-82724. Inspection and acceptance for production units will occur at the contractor's location, while FAT and LAT will be conducted at the government destination facility at NSWIC IHD in Indian Head, MD. Deliveries are scheduled based on Days After Date of Contract (DADC), with specific CDRL submissions like the Acceptance Test Plan and Radiographic Report due at 255 and 280 DADC, respectively. All invoicing must be processed through the Wide Area WorkFlow Receipt and Acceptance (WAWF-RR) system. The procurement also involves Government Furnished Property, including specific quantities of propellant and chemical materials.

POSTED

DEADLINE

N0016426RJR98 - TIMED FIRING DEVICE (TFD)

Solicitation # N0016426RJR98

The Naval Surface Warfare Center, Crane Division is soliciting proposals for the production, acceptance, and delivery of the Timed Firing Device (TFD) system, which includes the TFD kit (MR27), the TFD blasting demo accessory kit (MR28), and the RSI-1586-01 Plastic Encapsulated Detonator or Low Energy Exploding Foil Initiator (LEEFI) (MR29). This procurement is structured as a Firm-Fixed-Price, five-year Indefinite-Delivery Indefinite-Quantity supply contract, with all proposals evaluated under a Total Small Business Set-Aside pursuant to FAR 19.5 under NAICS code 325920. Offerors must be registered in the System for Award Management (SAM.gov) with an active Unique Entity ID and CAGE code, and must also be certified in the Joint Certification Program and Procurement Integrated Enterprise Environment Solicitation Module to access controlled documents. Compliance with Cybersecurity Maturity Model Certification Level 2 (Self) per DFARS 252.204-7025 is mandatory, and facilities must adhere to DoDM 5100.76 physical security standards with authorization to handle AA&E categories SRC I–IV, including appropriate explosive safety site plans and quantity-distance approvals. The government requires detailed manufacturing, management, and quality plans, including a process flow covering receipt, inspection, marking, assembly, testing, and packaging; a major assembly sequence chart; and verification that tolerance specifications are met. The quality plan must ensure inspection and testing of all components for critical functionalities including fixed time delays (30s, 3m, 10m), 24-hour programming, underwater capability, and operational verification of the LEEFI, Shock Tube Initiator, and training chip with beep/LED flash. Non-conforming material must be detected, segregated, and prevented from entering final production, with statistical process control and quality control methodologies employed and requirements flowed down to subcontractors with compliance verification. Proposals must be submitted in four volumes through the PIEE Solicitation Module by August 5, 2026, at 14:00 ET, following specific formatting standards including 8.5 x 11 inch pages, 12-point Times New Roman font, and numbered consecutive pages with a cover letter, table of contents, and glossary of abbreviations. The evaluation is based on best value, considering contract documentation

POSTED

DEADLINE

1355-01-387-7738 T107 Suspension Band Set MK89 MOD 1

Solicitation # N0010426RK058

The contract solicitation for the T107 Suspension Band Set MK89 MOD1 with a base quantity of 750 units includes a one-year option to increase the total procurement by up to 80 percent, allowing for potential expansion without requiring a new solicitation. The item is categorized under NAICS code 325920 and is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with performance and administrative responsibilities centered in Mechanicsburg, Pennsylvania. All documentation must be accessed electronically as paper copies will not be provided, and while technical drawings are available for reference, they are not distributed on CD. The solicitation was posted on July 20, 2026, with responses due by August 20, 2026, and no set-aside provisions are in effect, making it open to all qualified offerors. Primary point of contact for inquiries is Alison Maine, reachable via email or phone at the provided office details.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

1377 - 1377-01-692-4231, JP18 - JSF Cartridges as attached.

Solicitation # N0010426RK004

The procurement solicitation N0010426RK004, titled “1377 - 1377-01-692-4231, JP18 - JSF Cartridges as attached,” is issued by the Navsup Weapon Systems Support Mech under the Department of Defense and is restricted exclusively to Martin-Baker Aircraft. The contract requires the preparation of Ammunition Data Cards (ADC) in strict compliance with MIL-STD-1168 and the Worldwide Ammunition-data Repository Program (WARP) format, along with the marking of CAD/PAD items in accordance with MIL-STD-130, the DoD UID Guide, and supporting standards ISO/IEC 16022 and ISO/IEC 15434. All items must include both Human Readable Information and Machine Readable Information using the mandated Data Matrix ECC 200 format, with specific data elements including item nomenclature, CAGE code, lot number, serial number, manufacturer part number, and date of manufacture in MM/YYYY format. Markings are prohibited from referencing installation procedures, shelf life, or service life. Traceability for energetic materials such as pyrotechnics, propellants, and explosives requires the inclusion of manufacturer part numbers, lot numbers, and dates of manufacture in the ADC, supported by Certificates of Conformance, Analysis, and other quality records. The Defense Contract Management Agency Quality Assurance Representative is responsible for inspection and acceptance, with lot dispositions tracked through standardized codes such as PA and AC. The solicitation has undergone multiple amendments, all extending either the quote due date or the RFP response date, with the final deadline set for July 30, 2026. Paper copies are not provided, and drawings are available only as a limited package without CD distribution. Offers must acknowledge all amendments via specified methods, including completing SF-30 items, annotating submissions, or sending separate communications referencing the solicitation and amendment numbers; failure to do so may result in offer rejection. The contract is classified under NAICS code 325920 with no set-aside provision, and all submissions must be directed to the designated mailing address in Mechanicsburg, Pennsylvania. No pricing details, contract value, or performance timeline are provided in the documentation.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # FA821326R3061

The F-15 SMDC Cord Set contract, identified by solicitation number FA821326R3061, involves the procurement of Shielded Mild Detonation Cord lines and kits. These explosive components are critical for the F-15 Eagle aircraft's emergency canopy removal system, ensuring the linear transfer of energy required for aircrew escape during emergencies. This presolicitation was posted on August 17, 2026, with a response deadline of September 12, 2026. The project is managed by the Department of Defense through the Aflcmc Ebhk office located at Hill Air Force Base in Utah. The contract falls under NAICS code 325920 and does not include any specific set-asides.

POSTED

DEADLINE

1377-01-114-2037 XW53, 1377-01-116-3147 XW54, 1377-01-116-3148, 1377-01-487-2501 WB49, 1377-01-487-2513 WB50

Solicitation # N0010426RK076

The contract involves the procurement of explosive ordnance components including XW53, XW54, XW55, WB49, and WB50 items with specified quantities of 102, 186, 155, 20, and 30 units respectively, all governed under solicitation N0010426RK076 issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. Items are classified as explosive and require compliance with stringent safety and handling protocols, including a mandatory Safety Survey and adherence to MIL-STD-129, MIL-STD-2073, CFR 49 171-178, and MIL-STD-130 for packaging, preservation, and marking. Each item must be uniquely identified with UID compliance per MIL-STD-130, including both Human Readable Information and Machine Readable Information using Grade A, Style 2, Composition (b) pressure-sensitive labels as specified in MIL-PRF-61002, with special provisions for small items and modified legacy markings. Technical specifications mandate conformity to MIL-DTL-32186 Rev B, MIL-I-82928 (OS), MIL-DTL-82929 (OS), and DWG 857AS500 Rev H, with approved deviations through RFV FY16-V075R1 and FY16-V063R1. Each production lot requires test samples and investigative units, with comprehensive Ammunition Data Cards (ADC) generated per MIL-STD-1168 and WARP format, alongside mandatory Product Baseline submissions via DD1423 and obsolescence notifications. Delivery schedules range from 345 to 435 calendar days from award date, with shipments directed to multiple U.S. and international destinations including Indian Head, Maryland; Washington, D.C.; Joppa, Maryland; Sterling, Virginia; and Kuwait, under FOB Government Origin or FOB Contractor Destination terms as applicable. All payment and logistics reporting must be submitted electronically via Wide Area Workflow (WAWF), with invoices structured as “Combo” documents for fixed-price line items and cost vouchers for cost-type line items. The Contractor must comply with ISO-9001:2015 quality standards and CMMC requirements, including annual affirmations in the Supplier Performance Risk System, and

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # FA821326R3053

Solicitation FA821326R3053, titled F-117 CAD/PAD, is a Department of Defense procurement action issued by the AFLCMC EBHK office at Hill AFB, Utah. The solicitation was posted on August 17, 2026, with a response deadline of October 19, 2026. Classified under NAICS code 325920 for Industrial Gas Manufacturing, the requirement is open to all bidders as no set-aside for small businesses or specific socioeconomic categories was utilized. The place of performance is designated as Hill AFB, Utah. A critical component of the contract is the ES7034 clause regarding the rework and repair of nonconforming material. This mandate requires contractors to submit rework procedures to the Government Quality Assurance Representative for review and repair procedures via DD Form 1694 to the Contracting Officer for approval. All nonconforming material must be documented with root cause analysis and corrective actions, and the government retains final authority over inspection and acceptance to ensure complete conformance to drawings and specifications. Detailed information regarding the scope of work, pricing, evaluation factors, and delivery schedules is contained within the solicitation attachments.

POSTED

DEADLINE

B-2 Initiators and HJRM TLX

Solicitation # FA821326R3060

This pre-solicitation notice supports the CAD/PAD program office for the procurement of B-2 Initiators and HJRM TLX, including specific components such as time delay units, hatch jettison rocket motors, ambient pressure delays, TLX kits, and detonating cord assemblies. The requirement is not set aside for small businesses and is intended as a sole source award to Rockwell Collins. The proposed solicitation is expected to be available through the Governmentwide Point of Entry around September 1, 2026, with an estimated award date in January 2027. While the contract is sole source, interested parties and small businesses seeking subcontracting opportunities are encouraged to contact the listed firm. All responsible sources may submit capability statements or proposals, and non-qualified contractors must provide a qualification package.

POSTED

DEADLINE

1377 - 1377-01-364-7322, Impulse Cartridge, CCU-107/B; 1377-00-103-3434, Impulse Cartridge, MK 2 MOD 1

Solicitation # N0010426RK061

This solicitation, N0010426RK061, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, seeks competitive offers for the supply of two types of impulse cartridges: the CCU-107/B (NSN 1377-01-364-7322) and the MK 2 MOD 1 (NSN 1377-00-103-3434), totaling 15,224 units. The items are classified as Critical Safety Items and explosives, requiring strict compliance with hazardous materials shipping regulations including Title 49 CFR, IMDG Code, and ICAO Technical Instructions. A Safety Survey is mandatory, and drawings are not available on CD. The contract demands full adherence to MIL-STD-129, MIL-STD-2073, MIL-STD-130, and other military and federal standards for packaging, marking, and preservation, with unique item identifiers and machine-readable labels required per MIL-STD-1168 and MIL-PRF-61002. Shelf life requirements dictate at least 85% remaining life at delivery, with 13 years for the CCU-107/B and 12 years for the MK 2 MOD 1. Production lots must be palletized according to MIL-STD-1322 and transported under F.O.B. Origin or Government Origin terms depending on the line item, with final delivery destinations including Spain, Australia, Kuwait, and multiple locations in the United States. The contract employs a firm fixed-price structure under a best-value trade-off evaluation, prioritizing non-price factors significantly over price. Past performance, evaluated across quality, timeliness, and small business utilization, is the most critical factor and serves as a pass/fail gate requiring at least a limited confidence rating to be eligible for award. Small business participation is also evaluated as a non-price factor. Proposals must be submitted electronically via email by 18:00 ET on August 14, 2026, with file sizes limited to 10MB per email and acceptable formats including Word, Excel, or PDF. Proposals must be organized into four volumes confirming compliance with representations and certifications in SAM.gov, including CMMC Level 2 or higher, cybersecurity controls for FCI/CUI, ISO-9001:2015 quality system compliance

Navsup Weapon Systems Support Mech

POSTED

6 days ago

DEADLINE

in 8 days

View Details

More opportunities from Department Of Defense → FA8213 Aflcmc Ebhk

Same awarding agency

NAICS: 541330

New

Federal

Technical Data Package (TDP) and CAD/PAD Engineering Support

POSTED

DEADLINE

Aerospace Component Rework and Repair Services

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Solicitation # FA8213-26-R-3034

Solicitation FA8213-26-R-3034, titled T-38 REMAN, is a Firm-Fixed Price contract issued by the Department of Defense through the FA8213 AFLCMC EBHK office at Hill Air Force Base, Utah. The scope of work involves the remanufacturing of Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD) for the USAF and USN. The requirement includes the supply of five specific NSN/PN line items with quantities ranging from 69 to 83 units, as well as teardown and inspection services and data submission in accordance with specification 1423-1. The procurement falls under NAICS code 325920 for Explosives Manufacturing and Product Service Code 1377. This is a sole source acquisition designated as other than full and open competition under RFO 6.103-1. All deliverables are scheduled for delivery within 12 months after receipt of order, with the specific place of performance to be determined upon contract award. Quality standards are governed by MIL-STD-1423. Proposals are due by September 14, 2026, and should be submitted to the contracting office at Hill AFB. Primary points of contact for the solicitation are Deric Deede and Mitch Carver.

Explosives Manufacturing

POSTED

DEADLINE

F-16 Canopy Jettison Rocket Motors

Solicitation # FA821326R3000

The contract seeks F-16 Canopy Jettison Rocket Motors (CJRM) for the U.S. Department of Defense, with solicitation number FA821326R3000, issued by the Air Force Life Cycle Management Center at Hill Air Force Base, Utah. The requirement is strictly limited to pre-qualified sources as outlined in the JFQR document, and only offerors who are fully qualified may be considered for award. The motors must comply with exact technical specifications including physical dimensions of 12.000 inches in length, 3.6000 inches in width, and 2.5000 inches in height, with distinct part numbers and NSNs for left and right-hand side units. Manufacturing must adhere to ISO 9001-2015 quality standards, and each unit must bear a unique serial number and IUID marking consistent with CAD/PAD Item Marking Instructions version 1.6. A complete production capability demonstration test report is required to verify compliance with performance, environmental, mechanical, and quality assurance criteria. The offeror must also provide detailed process documentation, including sources for materials and internal standards. Packaging and handling are governed by stringent military standards, including MIL-STD-2073-1, MIL-STD-648, MIL-STD-147, MIL-STD-1660, and MIL-STD-129 for marking and labeling, with specialized packaging instructions SPI F01-058-0122 required for the rocket motors due to their explosive nature. Hazardous material packaging must comply with specific directives, and electrostatic-sensitive components must follow ESD standards. All shipments must be F.O.B. Origin, with final delivery to a designated location in Pine, Utah, and electronic invoicing through WAWF under DoDAAC FA8213 is mandatory. Monthly production status reports covering build, delivery, testing, and schedule adherence are required, with the initial report due within 14 days of First Article Test approval. The contract mandates compliance with cybersecurity controls per NIST SP 800-171, safety precautions for explosives under DFARS 252.223-7002, and Buy American Act requirements. Proposals must be submitted by August 27, 2026, and offerors must maintain current representations and certifications in SAM, including disclosures on foreign ownership, conflict

Explosives Manufacturing

POSTED

DEADLINE

Small Business Teaming and Prime/Subcontractor IntegrationCertified small businesses are invited to engage in future aerospace safety component production opportunities by teaming with prime contractors or serving directly as primes. This initiative facilitates collaboration between eligible small entities and larger contractors to support defense-related manufacturing requirements under NAICS code 325920, which covers chemical and allied products manufacturing. The opportunity is open for participation in upcoming solicitations without a specified solicitation number, with submissions encouraged prior to the deadline of September 4, 2026. While no set-aside designation is currently defined, the focus remains on integrating small businesses into the defense supply chain for critical aerospace safety components. Participation is facilitated through the Department of Defense’s Aflcmc Ebhk office, with performance expected to align with federal defense manufacturing standards, though no specific location for performance has been designated. Interested parties must register and respond through the SAM.gov portal linked in the posting.

Explosives Manufacturing

POSTED

DEADLINE

Technical Data Package (TDP) Development and Engineering SupportThe contract seeks the development of comprehensive technical data packages for aerospace safety components, encompassing detailed engineering drawings, technical specifications, and precision CAD models, intended for either reverse engineering existing parts or enabling new production efforts. The work must meet stringent aerospace industry standards, ensuring every deliverable accurately supports component manufacturing, inspection, and certification processes with full traceability and adherence to safety-critical requirements. This is a subcontract opportunity under the NAICS code 541330 for engineering services, managed by the Department of Defense through the office FA8213 Aflcmc Ebhk. Proposals must be submitted by September 4, 2026, and performance is expected to support defense-related aerospace systems with no specific geographic restriction listed. The contract aims to secure technical expertise capable of translating complex mechanical components into fully documented, production-ready data packages, requiring a high level of precision, regulatory compliance, and experience in military or aerospace environments.

POSTED

DEADLINE

Testing and Quality Assurance Services for Safety ComponentsThe contract seeks subcontractor services to perform independent testing, validation, and quality assurance for aerospace safety components, covering environmental, functional, and reliability testing to ensure compliance with rigorous aerospace standards. The work involves rigorous evaluation protocols to verify component integrity under simulated operational conditions, with an emphasis on safety-critical applications within defense systems. The contract is listed under NAICS code 541380 for engineering services and is classified as a subcontract under the Department of Defense, specifically managed by FA8213 Aflcmc Ebhk. The solicitation was posted on August 4, 2026, with a firm response deadline of September 4, 2026, at 10:00 PM EDT. No set-aside designation or specific location for performance is provided, and no point of contact is listed, indicating that all inquiries must be directed through the official SAM.GOV platform using the provided link.

Testing Laboratories and Services

POSTED

DEADLINE

Arm-Fire Initiator SupplyThe contract seeks the production of electrical or mechanical arm-fire initiators designed to trigger pyrotechnic sequences in aerospace safety systems, with strict requirements for quality control and full traceability throughout manufacturing and delivery. These initiators are critical components that must meet exacting performance and reliability standards to ensure safe operation in high-stakes aerospace environments, and all manufacturing processes must be documented and auditable to maintain compliance with defense-grade specifications. The work is classified as a subcontract under NAICS code 325920, indicating specialized chemical and allied products manufacturing, and is issued under the Department of Defense’s FA8213 Aflcmc Ebhk organization. The solicitation was posted on August 4, 2026, with a firm deadline for responses on September 4, 2026, at 10:00 PM Eastern Time. Although specific place of performance or contact details are not provided, the nature of the work and the agency involvement imply that the successful bidder must be prepared to operate under stringent defense contracting protocols, including potential security clearances, export controls, and adherence to military specifications. The absence of set-aside information suggests this opportunity is open to all qualified vendors, but only those capable of delivering highly reliable, traceable initiators with documented quality assurance will be considered.

Explosives Manufacturing

POSTED

DEADLINE

Deployment Actuator ProductionThe contract pertains to the manufacture of precision mechanical or pyrotechnic deployment actuators essential for activating critical aerospace safety systems, including fire suppression and ejection mechanisms. These components must meet stringent reliability and performance standards to ensure operational safety in high-risk aerospace environments. The work is structured as a subcontract under the Department of Defense and falls under NAICS code 332996, indicating specialized fabrication of other metal products. Performance is expected to align with Defense Department specifications, though the exact location of performance is unspecified. The solicitation was posted on August 4, 2026, with a firm response deadline of September 4, 2026, at 10:00 PM Eastern Time, leaving potential contractors approximately one month to prepare and submit proposals. No set-aside provisions or small business preferences are indicated, and the contact point for inquiries is not publicly listed, requiring interested parties to engage through the provided SAM.gov portal for further details.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

16 days ago

DEADLINE

in 15 days

View Details