Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Industrial Machinery Repair and Overhaul Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the evaluation, repair, and modification of clutch assemblies identified by NSN 7HH 3010-01-266-6858 to restore them to fully operable condition. The scope of work includes the disassembly of the clutch assemblies, thorough inspection of all components, replacement of defective parts, reassembly, and comprehensive testing to ensure functionality. This maintenance and overhaul service aims to extend the service life and reliability of the equipment. The contract is categorized under industrial machinery repair and overhaul services, specifically within the NAICS code 333612. It is a subcontract opportunity posted on May 28, 2026, by the Naval Supply Systems Command (Navsup) Weapon Systems Support Mech under the Department of Defense. The work is to be performed in New Castle, with the postal code 19720. No specific set-aside type or organization classification has been indicated, and further contract details and documentation can be accessed through the federal contracting portal.

General Info

Repair and overhaul of clutch assemblies NSN 7HH 3010-01-266-6858 by Naval Supply Systems Command, New Castle.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear ManufacturingView NAICS

Place of Performance

New Castle, DE, 19720, USA

Set-Aside

NONE

Documents

This scope was carved out of N0010426PUB21.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLUTCH,POSITIVE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 28

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Evaluation, repair, and modification of NSN 7HH 3010-01-266-6858 clutch assemblies to restore to operable condition, including disassembly, inspection, component replacement, reassembly, and testing.

Similar Contracts

Same NAICS industry code

COUPLING, SHAFT, FLEX

Solicitation # SPE7L3-26-T-218D

This contract, identified as solicitation SPE7L3-26-T-218D, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of 42 flexible shaft couplings. The items are identified by NSN 3010-01-096-1094 and part number 70361-08002-041 from Sikorsky Aircraft Corporation. This is a critical application item with a required delivery date of February 21, 2027, and a delivery window of 157 days after the order is placed. The delivery terms are FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Environmental restrictions are in place prohibiting the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Additionally, the contract incorporates requirements for the removal of government identification from non-accepted supplies and the protection of covered defense information.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 23 hours ago

DEADLINE

Positive Nonvehicular Clutch Supply (NSN 3010008049979)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

30--CLUTCH,POSITIVE,NONVEH

Solicitation # SPE7L3-26-T-248E

Solicitation SPE7L3-26-T-248E is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of positive nonvehicular clutches, NSN 3010008049979. This is a total small business set-aside under NAICS code 333612. The requirement consists of two line items: 207 units for general delivery and one unit for First Article Testing. The first article must be delivered to Hill AFB within 90 calendar days of the contract award for government testing and approval. General delivery is scheduled for 700 days after award, with a need ship date of January 25, 2028. The item is designated as a restricted source item requiring engineering source approval by the government design control activity. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and utilize the Wide Area WorkFlow system for all invoicing. Key compliance requirements include the Buy American Act, the Berry Amendment, and CMMC Level 2 certification. Additionally, the use of Class I ozone-depleting chemicals and additive manufacturing processes is prohibited. Quotes must be submitted electronically via the DIBBS portal by September 21, 2026, and should be based on FOB Origin terms.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

30--2-TON CHAIN HOIST

Solicitation # N0010426QBJ41

This solicitation, issued by the Navsup Weapon Systems Support Mech for a 2-ton chain hoist, is a fixed-price contract set aside for small businesses. The procurement is governed by strict technical requirements, including the Individual Repair Part Ordering Data and specific military specifications. Key compliance mandates include a prohibition on the intentional use of mercury, adherence to cybersecurity maturity model certification levels, and strict export controls that prohibit the release of technical documents to foreign nationals without prior approval from the Naval Sea Systems Command. The contract emphasizes a rigorous quality assurance and packaging process, requiring specific cleanliness controls and the use of approved packaging materials. Vendors must review mandatory drawings and data available via the BPMI website and provide a Certificate of Compliance upon material delivery. Pricing for quotations is generally valid for 60 days, and the current closing date for responses is July 23, 2026. All deliverables and technical data must follow the established order of precedence, with contract amendments taking the highest priority.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--SOLENOID,ELECTRICAL

Solicitation # SPE7M1-26-U-6079

Solicitation SPE7M1-26-U-6079 is a Request for Quotations issued by the Department of Defense Maritime Supply Chain for the procurement of electrical solenids under NSN 5945003690865. This is a Total Small Business Set-Aside under NAICS code 333612. The procurement may result in an Automated Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual quantity is one unit, with a guaranteed minimum of one. Delivery is required within 106 days after order, with shipments directed to various CONUS and OCONUS DLA Depots. Approved sources include 0EXU3 832-07521-000 and 0EXU3 832-7521. Quotes must be submitted electronically via the DIBBS portal by September 25, 2026. Award is based on price, provided the offeror is technically eligible; quotes for used, reconditioned, or remanufactured items, or those with a validity period of less than 90 days, will be deemed ineligible. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Additionally, components must be marked according to IPC/JEDEC J-STD-609. Inspection and acceptance will occur at the destination. Payment processing is required through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and compliance with the Buy American and Balance of Payments Program.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

30--GEARCASE-MOTOR

Solicitation # SPE7L1-26-T-10T6

Solicitation SPE7L1-26-T-10T6 is a request for quotations issued by the Department of Defense DLA Land and Maritime for the procurement of one Gearcase-Motor, identified by NSN 3010016555477. This is a total small business set-aside under NAICS 333612. Approved sources for the item include Sumitomo Machinery Corp of America (part number CHFMS-6165DB-2537/G71G/4) and Renk Aktiengesellschaft (part number 6463108). The item is to be delivered to the USS Kansas City LCS 22 within 20 days after the award. The contract is a fixed-price agreement with inspection and acceptance occurring at the destination. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. All quotes must be submitted via the DIBBS portal by the deadline of September 21, 2026. Offerors must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information.

LAND SUPPLY CHAIN

POSTED

DEADLINE

30--GEAR ASSEMBLY,SPEED DE

Solicitation # SPE7LX-26-U-002H

The Department of Defense, through the DLA Land and Maritime Strategic ACO Program Directorate, is soliciting quotes for the procurement of eight Gear Assembly, Speed DE units under NSN 3010012706525. This is a total small business set-aside under NAICS code 333612. The procurement may result in a unilateral Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches 350,000.00 dollars. The government expects approximately two orders per year, with a guaranteed minimum of one. Quotes must be submitted electronically by September 25, 2026. The successful offeror must deliver the items within 255 days, with inspection and acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 requirements. For bearings, awards are restricted to those manufactured in the United States, its outlying areas, or Canada, provided the domestic component cost exceeds 50 percent of the total cost. Payment and receiving reports must be processed through the Wide Area WorkFlow system. Award will be granted to a responsible offeror whose quote is determined to be the most advantageous to the government based on the price quoted for the estimated annual demand.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-01-359-9445)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Magnetic Nonvehicular Clutch (Sea Sparrow Missile System)

LAND SUPPLY CHAIN

POSTED

DEADLINE

Rotary Gear Operator Supply

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Gearcase-Motor (NSN 3010-01-425-0357)

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Supply of Non-Vehicular Universal Joint Spiders

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

43--PURIFIER,CENTRIFUGA, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RTC34

This presolicitation notice, issued by the Navsup Weapon Systems Support Mech, concerns the repair or modification of five centrifugal purifiers under NSN 7H-4330-014169311, TDP VER 003. The delivery terms are set as FOB Origin. The government intends to solicit and negotiate with a single source under FAR 6.302-1, as it has been determined that purchasing data rights or reverse engineering the parts is uneconomical. Interested parties may submit proposals, quotations, or capability statements within 45 days of publication, or within 15 days if offering a commercial item. While the government is not currently utilizing FAR Part 12 for commercial items, responsible sources may still identify their interest and capability to respond. Technical documentation and standards can be obtained through the DoD Single Stock Point or the ASSIST-Online portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

in about 1 month

41--COMPRESSOR UNIT,REF, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RZB79

This presolicitation notice, issued by the Navsup Weapon Systems Support Mech, is for the repair or modification of four compressor units under NSN 7H-4130-015181389-A3. The delivery terms are set as FOB Origin. Due to the fact that the government does not own the necessary technical data and has determined that purchasing such rights or reverse engineering the parts is uneconomical, the government intends to solicit and negotiate with a single source under the authority of FAR 6.302-1. While this is not a formal request for competitive proposals, the government will consider capability statements, quotations, or proposals from all responsible sources to determine if a competitive procurement is warranted. Interested parties must submit their responses by October 28, 2026. The final decision to proceed with a sole-source or competitive contract remains at the sole discretion of the government.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

in about 2 months

ACCELEROMETER,MECHA

Solicitation # N0010426QNE28

This solicitation from the Navsup Weapon Systems Support Mech is for the repair of several sonar-related components, including towed arrays, adapter assemblies, and receiving sets. The scope covers the repair of 21 total units across five different National Stock Numbers. The government requires a requested repair turnaround time of 375 days and mandates government-source inspection and acceptance. Contractors must provide unit repair prices, beyond repair prices, and throughput constraints in their quotes. Key compliance requirements include a valid U.S. security clearance per DD Form 254 and strict adherence to mercury-free material standards for use on submarines and surface ships. The government retains an option to order an additional quantity up to 100 percent of the original order for 468 days after the award at the same price. All submissions must be sent via email to the designated point of contact, Rachel Kern.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

DEFLECTOR,DIRT AND

Solicitation # N0010426QBQ38

This solicitation is for the procurement of dirt deflectors under a small-business set-aside, with a response deadline of September 17, 2026. The contract is a fixed-price agreement for supplies delivered FOB-destination, requiring compliance with specific technical documentation, including Individual Repair Part Ordering Data (IRPOD) and various military specifications. Pricing for quotations is generally valid for 60 days following the closing date. Key requirements include strict adherence to the established order of precedence for technical documents and the prohibition of mercury in hardware. Contractors must maintain an acceptable inspection system and follow detailed packaging and cleanliness standards, such as MIL-PRF-23199. Deliverables include a Certificate of Compliance and a cure date certificate submitted at the time of material delivery. The contract also mandates cybersecurity maturity model certification and adherence to specific distribution statements for the safeguarding of technical data.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

HALL EFFECT, 200A

Solicitation # N0010426QED44

Solicitation NO0104-26-Q-ED44 is a fixed-price, small business set-aside procurement issued by NAVSUP Weapon Systems Support Mech for the acquisition of 66 units of Hall Effect, 200A (NSN 1HM 6625-01-689-5402 X3). The total quantity was increased from 34 to 66 units via Amendment 0001, with deliveries split between shipping locations W25G1U and W62G2T. The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. Technical requirements are governed by the Individual Repair Part Ordering Data (IRPOD) and Technical Data Package Version 002, with a strict prohibition on the intentional use of mercury. The contractor must provide a Certificate of Compliance per DI-MISC-A81356 and report Unique Item Identifiers (IUID) at the time of delivery. Inspection and acceptance will occur at the contractor's or subcontractor's plant. Shipping is FOB destination with costs prepaid. Payment and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Pricing for quotations remains valid for 60 days after the closing date.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

28--ARM ASSY ROCKER

Solicitation # N0010426QEG55

This presolicitation notice, identified by solicitation number N0010426QEG55, is for the procurement of 50 units of the 28-ARM ASSY ROCKER under NSN 1H-2815-016959867-PP. The items are to be delivered to DLA Distribution centers in New Cumberland, Pennsylvania, and Tracy, California. The Department of Defense, through Navsup Weapon Systems Support Mech, intends to solicit this requirement from a single source under FAR 6.302-1, as the government does not own the data rights for the part and reverse engineering is deemed uneconomical. While this is not a formal request for competitive proposals, the government will consider proposals or capability statements from responsible sources received within 45 days of publication, or 30 days if awarded under an existing Basic Ordering Agreement. Interested parties have 15 days to notify the contracting officer if a commercial item can satisfy the requirement, as FAR Part 12 policies are not currently being utilized. The response deadline for this action is October 27, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 1 month

48--VALVE,BUTTERFLY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QLC43

The Department of Defense, through Navsup Weapon Systems Support Mech, is issuing a presolicitation notice for the repair or modification of 75 butterfly valves under NSN 7H-4820-012448339, TDP VER 005. The government intends to negotiate with a single source under FAR 6.302-1 because it does not own the necessary data rights and has determined that reverse engineering or purchasing the data is uneconomical. Delivery is specified as FOB Origin. While this is not a formal request for competitive quotes, interested parties may submit capability statements or quotations to demonstrate their ability to meet the requirement. All submissions must include a CAGE code. The government will consider these responses to determine if a competitive procurement is warranted. Technical documentation can be accessed via the DODSSP or ASSIST-Online. Award is contingent upon the offeror meeting qualification requirements per FAR 52.209-1.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

COMPRESSOR,GUN RECO

Solicitation # N0010426QUC09

This solicitation from the Navsup Weapon Systems Support Mech is for the procurement or repair of a Gun Recoil Compressor. The contract requires the awardee to be an authorized source, with distributors providing official OEM authorization. It specifies a firm-fixed price and, in the case of repair services, a requested turnaround time of 180 days. Failure to meet this turnaround time may result in a price reduction via a reconciliation modification. Key requirements include adherence to MIL-STD packaging and IUID standards per DFARS 252.211-7003. The contract is issued bilaterally, requiring written acceptance from the contractor. All quotes and certifications must be submitted electronically to the designated point of contact. The scope also includes strict quality assurance protocols, government source inspection, and specific guidelines for reporting design or part number changes.

Other Electronic Component Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # N0010426QFE84

This solicitation, issued by Navsup Weapon Systems Support Mech, is for the procurement of high-criticality metal bars, specifically nickel-copper alloy and copper-nickel alloy forgings. Due to their use in crucial shipboard systems, these items are designated as Special Emphasis material, requiring strict adherence to quality assurance standards, including ISO-9001 and specific MIL-STD certifications. The contract emphasizes rigorous material traceability, ultrasonic inspection, and the prohibition of mercury-containing compounds to prevent system failures that could lead to loss of life or vessel loss. Key requirements include the submission of certification data 20 days prior to delivery and a final delivery window of 365 days. The procurement is a combined solicitation for multiple related items, allowing for awards at the CLIN level to multiple vendors. Offerors must provide a certificate of compliance and maintain a documented quality system available for government audit. The response deadline for this solicitation is September 25, 2026.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

DEADLINE

TAILPIECE,UNION

Solicitation # N0010426QFF42

This solicitation is for the procurement of a Straight Tailpiece (piece 73), designated as Special Emphasis material due to its critical role in shipboard systems where failure could result in serious injury or loss of the vessel. The contract requires the use of ASTM-B369 UNS C96400 material and mandates rigorous quality controls, including hydrostatic testing, dye penetrant inspection, and radiography. All internal threads must be cut rather than cold-formed, and the contractor must adhere to strict DPAS DO-rated priority and Buy American standards. The delivery process involves a phased schedule including the submission of Radiographic Shooting Sketches and Production Radiography for approval prior to final delivery, which must occur within 365 days of the contract effective date. Documentation and certifications must be submitted via Wide Area Workflow (WAWF) to Portsmouth Naval Shipyard. The contract emphasizes strict configuration control, requiring formal Engineering Change Proposals for any modifications and a comprehensive certificate of compliance for all delivered items.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Starter, engine, air

Solicitation # N0010426QX124

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS