Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Industrial Process Equipment Installation

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the installation of new conveyors, dryers, and sorting systems designed to increase daily meat processing capacity from 65 to 180 tons within a food-grade environment, ensuring compliance with strict hygiene and safety standards. The project focuses on upgrading industrial processing infrastructure to meet higher production demands while maintaining the integrity of the food-handling workflow. All equipment must be integrated seamlessly into existing operations and certified for use in regulated food production settings. This subcontract is categorized under NAICS code 333291 and is tied to a project managed by Madera County in California, with the work to be performed in the city of Madera. The contract was posted on May 29, 2026, and is accessible through the provided state portal, indicating its alignment with public infrastructure or facility enhancement initiatives. The scope demands precision in installation to support continuous, high-volume operations without compromising food safety protocols or operational efficiency.

General Info

Install conveyors, dryers, and sorting systems to raise meat processing to 180 tons/day in Madera, California.

Agency

California → Madera County

NAICS

333291 - Paper Industry Machinery ManufacturingView NAICS

Place of Performance

Madera, CA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 29

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Madera County

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Madera County

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of new conveyors, dryers, and sorting systems to increase meat tonnage capacity from 65 to 180 per day in a food-grade environment.

Similar Contracts

Same NAICS industry code

Substrate Heating System IntegrationTexas A&M University is seeking a subcontractor to supply and integrate a substrate heating unit designed to reach temperatures of up to 250°C, specifically compatible with the BJD/FC-2000 electron beam evaporation system for use during thermal processing in thin film deposition. The system must be fully integrated to ensure seamless operation within the existing deposition environment, maintaining process integrity and thermal consistency. The solicitation is open for responses until July 23, 2026, with submissions due by 7:00 PM Eastern Time, and the procurement falls under NAICS code 333291 for other commercial and industrial machinery and equipment manufacturing. The contract will be executed under the university’s procurement framework, with all performance and delivery expected to align with the operational requirements of the facility. Further details and submission instructions are available through the provided online portal.

Texas A&M University

POSTED

DEADLINE

Ultrasonic Spray Nozzle Integration and ManufacturingThe contract requires the design, manufacture, and delivery of a specialized ultrasonic spray nozzle system that integrates seamlessly with the Buchi Mini Spray Dryer S-300 to enable clog-free operation and precise control over particle size through ultrasonic vibration technology. The solution must be engineered to enhance the dryer’s performance by eliminating nozzle blockages common in spray drying applications and allowing dynamic adjustment of output particle dimensions, which is critical for pharmaceutical and food product consistency. The system must be robust, reliable, and compatible with the existing hardware without requiring major modifications to the base equipment. The work is to be performed under a subcontract and is targeted for delivery to a specified performance location in Silver Spring, Maryland, with a ZIP code of 20993. The solicitation was posted on July 8, 2026, and responses are due by July 20, 2026. The contract falls under NAICS code 333291, which categorizes it within the manufacturing of industrial process control equipment. This effort supports the Food and Drug Administration, under the Department of Health and Human Services, and is intended to advance capabilities in controlled particle formulation for regulated products.

Food And Drug Administration

POSTED

DEADLINE

Supply of Vibration Isolation TableThe contract calls for the supply of a high-performance vibration isolation table designed for precision optical applications, featuring a natural frequency of no more than 2.0 Hz and a load capacity of 500 pounds. The tabletop must be constructed from stainless steel to ensure durability, stability, and compatibility with sensitive instrumentation in controlled environments. This equipment is intended for use in high-accuracy settings where even minimal vibration can compromise measurements or operations, making the technical specifications non-negotiable. The table must meet rigorous environmental and performance standards to support federal research, development, or operational needs. The contract is categorized as a subcontract under NAICS code 333291, which pertains to other commercial and service industry machinery manufacturing. It was posted on July 8, 2026, with a response deadline of July 23, 2026, at 3:59 AM Eastern Time. The place of performance is identified as Philadelphia, Pennsylvania, with a zip code of 19111, indicating the equipment must be delivered to or installed at a facility within that location. The contracting activity is linked to the DCSO-COLUMBUS-DIVISION-2 under the Department of Defense, suggesting this procurement supports defense-related scientific or engineering initiatives requiring exceptional vibration control. No set-aside provisions or specific point of contact details are provided in the available data.

DCSO-COLUMBUS-DIVISION-2

POSTED

DEADLINE

Spacecraft Additive Manufacturing & In-Space FabricationThe contract focuses on advancing additive manufacturing techniques specifically for spacecraft components, emphasizing the development of 3D printing technologies suitable for use in space or on extraterrestrial surfaces such as the Moon or Mars. The objective is to enable in-space or off-world fabrication capabilities, which would support future space missions by reducing the need to carry large quantities of spare parts and allowing for on-demand manufacturing in harsh environments. Issued by the Department of Defense under the AFRL (Air Force Research Laboratory) with NAICS code 333291, this subcontract invites proposals through March 23, 2030. Although specific details regarding the solicitation number, set-aside status, and location of performance are not provided, the contract represents a strategic investment in cutting-edge manufacturing technologies aiming to enhance the operational flexibility and resilience of spacecraft through innovative fabrication methods in space environments.

FA9453 Afrl Rvk

POSTED

DEADLINE

in over 3 years

Service Support Equipment SupplyThe contract is for the supply of service support equipment dedicated to the maintenance and operation of the Fluke Azima DLI Trio vibration analysis system within naval environments. This subcontract aims to ensure that critical diagnostic tools remain functional and operationally ready for use in maritime settings, supporting the detection and analysis of mechanical vibration issues in naval assets. The equipment provided will enable timely and accurate condition monitoring, contributing to preventive maintenance strategies and overall fleet readiness. Performance of this contract is centered in Everett, Washington, with the award managed under the Department of Defense through DLA Maritime - Puget Sound. The North American Industry Classification System code 333291 indicates the work falls within the category of other commercial and service industry machinery manufacturing, suggesting the equipment involved may include specialized diagnostic tools, accessories, or calibration hardware tailored to the Fluke Azima DLI Trio system. As a subcontract, the work supports an existing larger contractual framework, and the solicitation was posted on May 8, 2026, with no set-aside type specified, meaning it is open to all eligible contractors regardless of business size or status.

DLA Maritime - Puget Sound

POSTED

DEADLINE

Plant Equipment Procurement and IntegrationThe contract titled Plant Equipment Procurement and Integration seeks to acquire and integrate advanced plant equipment including production machinery and laboratory automation systems to transition DARPA-developed technologies from research into scalable, operational environments. The work is focused on enabling the practical deployment of innovative defense technologies by establishing robust, high-throughput manufacturing and testing capabilities aligned with mission-critical requirements. This subcontract is aimed at industry partners capable of delivering turnkey solutions that seamlessly combine hardware, software, and process controls to support rapid scale-up within controlled facilities. The opportunity is open for responses until April 30 2027 and falls under NAICS code 333291 for other industrial machinery manufacturing. Performance is expected to occur in Arlington with all equipment and integration activities designed to meet the technical and security standards of the Department of Defense. The contract does not designate a specific set aside category and the procurement is managed directly by DARPA under the broader defense innovation agenda. Subcontractors must demonstrate proven experience in integrating complex automation systems in high-assurance environments and be prepared to collaborate closely with government technical teams to ensure compatibility with existing DARPA-developed platforms and protocols.

Defense Advanced Research Projects Agcy

POSTED

DEADLINE

Special Tooling (ST) and Special Test Equipment (STE) Supply and MaintenanceThe contract involves the design, supply, calibration, and ongoing maintenance of specialized tooling and test equipment essential for the assembly, testing, and sustainment of Tomahawk missiles. This work supports critical defense operations by ensuring precision and reliability throughout the missile lifecycle, from production to field maintenance. The equipment must meet exacting military standards to facilitate accurate handling, functional verification, and diagnostic capabilities unique to the Tomahawk system. The contract is positioned as a subcontract under the Naval Air Systems Command, a division of the Department of Defense, with the place of performance located in Tucson, Arizona, at zip code 85756. The North American Industry Classification System code 333291 identifies the scope as other industrial machinery manufacturing, indicating a focus on custom-built, non-standard equipment. Although the solicitation number and point of contact are not provided, the contract was posted on April 24, 2026, signaling an upcoming procurement cycle aimed at securing critical support infrastructure for naval aviation systems.

Naval Air Systems Command

POSTED

DEADLINE

Precision Machine Tool Component Supply

POSTED

DEADLINE

Cannabis Manufacturing & Processing Equipment Installation

City of Los Angeles

POSTED

DEADLINE

Packaging & Labeling Equipment SupplyThis contract involves the supply of advanced packaging and labeling equipment, specifically barcode printers, label applicators, and verification systems designed for high-resolution printing. These systems must be capable of seamless integration into pharmaceutical production lines to ensure compliance with the Drug Supply Chain Security Act (DSCSA). The equipment is critical for maintaining traceability and verification standards within pharmaceutical manufacturing. The contract is issued as a subcontract by the Department of Defense, through the DLA Troop Support agency. The place of performance is located in Charlotte, with the postal code 28206. The product category falls under the NAICS code 333291, which pertains to packaging machinery manufacturing. This procurement supports the enhancement of pharmaceutical labeling processes on military or government-related projects, ensuring that supplied goods meet regulatory requirements and technical specifications.

DLA Troop Support

POSTED

DEADLINE

Manufacturing Equipment Installation and Validation

POSTED

DEADLINE

Custom Tooling Package for CNC Machine

POSTED

DEADLINE