Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

INSECTICIDE, WASPS A

Awarded
SPE4A626FCUMDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded a delivery order under contract SPE4AX16D9008 to ASRC Federal Facilities Logistics, LLC (CAGE 79343), a small disadvantaged woman-owned business, for the procurement of one unit of insecticide (WASP FREEZE), NSN 6840004592443, at a total price of $152.85. The order, issued as SPE4A626FCUMD, was awarded on July 17, 2026, and requires delivery by July 28, 2026, to 2420 W Butler Ave, Building 651, Lincoln, NE 68524-1888, with FOB destination terms placing risk and responsibility on the contractor until receipt by the government. Packaging and shipping must comply with traceable transportation methods and specific marking requirements, including TCN FB627161980067, RDD 777, and SUPP ADD YAZ605, with 2D barcode (ADV: 2D) and DIC A0A data coding. The insecticide must conform to the terms of the underlying basic contract and is subject to government inspection and acceptance at the destination. Payment will be processed by the Defense Finance and Accounting Service in Columbus, Ohio, following DFARS 252.232-7003 requirements, likely via WAWF electronic invoicing. The contractor’s socioeconomic status as a small disadvantaged woman-owned business triggers compliance with SAM registration and subcontracting reporting obligations under FAR 52.219-9, and the order is covered under the Defense Priorities and Allocations System (DPAS). The contracting officer’s representative is Amanda Parker, and the administrative contact is Holly Dunganan at DLA Aviation. No additional clauses, attachments, or special requirements were provided beyond the basic contract incorporation, and the full scope is limited to this single-line commercial item acquisition without options, renewals, or extended performance periods.

General Info

DLA awards ASRC FEDERAL $152.85 for insecticide NSN 6840004592443, July 17, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$152.85

NAICS

325320 - Pesticide and Other Agricultural Chemical ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

ASRC FEDERAL FACILITIES LOGISTICS,View Profile

Award Issued Date

Documents

(1)

SPE4A626FCUMD.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
DLA award SPE4A626FCUMD posted on DIBBS. Awardee: ASRC FEDERAL FACILITIES LOGISTICS, (CAGE 79343) Total Contract Price: $152.85 Award Date: 07-17-2026 Delivery order under: SPE4AX16D9008 Line items: - INSECTICIDE, WASPS A (NSN/Part 6840004592443, PR 7017541547)

Similar Contracts

Same NAICS industry code

NAICS: 325320
New
Federal
Manufacture and Supply of DDVP Insecticide Strips (Small)The contract solicits the full-scale manufacturing and delivery of 1-inch by 1-inch DDVP insecticide strips designed for use in exotic fruit fly surveillance programs, with strict requirements to meet or exceed the performance and quality standards of established brand-name products. The strips must be produced in compliance with all relevant technical specifications to ensure efficacy in detecting and monitoring invasive fruit fly populations, a critical component of agricultural biosecurity. The solicitation is designated as a Small Business Set Aside under the SBA, exclusively open to qualified small businesses, and falls under NAICS code 325320 for pesticide and other agricultural chemical manufacturing. The contract is issued by the Department of Agriculture through Mrpbs Aamd Contracting, with performance required to be located in Edinburg. All bids must be submitted by August 14, 2026, at 8:30 PM Eastern Time, following a posting date of July 31, 2026. The contract type is a subcontract, indicating it may be part of a larger program or procurement framework. While specific quantities, pricing, and delivery schedules are not detailed here, successful vendors will be expected to ensure consistent product quality, regulatory compliance, and reliable supply chain logistics to support ongoing federal pest detection and eradication efforts.
Mrpbs Aamd Contracting

POSTED

4 days ago

DEADLINE

in 11 days
View Details
NAICS: 325320
New
Federal
Pesticide Strips- DDVP, Small
Solicitation # 12639526Q0244
This solicitation, numbered 12639526Q0244, is a combined synopsis and request for quotation for Pesticide Strips – DDVP, Small, issued under FAR Part 12 as a commercial item acquisition. The requirement is for an indefinite-delivery/indefinite-quantity (IDIQ) contract spanning five years from August 15, 2026, to August 14, 2031, with five annual ordering periods, each requesting an estimated 24,000 bags of insecticide strips. The product is used for surveillance and detection of exotic fruit flies critical to U.S. agricultural protection. The acquisition is a total small business set-aside under NAICS code 325320, with a small business size standard of 1,150 employees, and only responsible small businesses may respond. Quotations must be submitted electronically by 4:30 PM Eastern Time on August 14, 2026, to the designated point of contact, and must include pricing, a technical approach demonstrating compliance with the statement of work, and supporting documentation such as product datasheets or brochures to establish equivalency for brand-name or equal items. The contract imposes strict packaging and labeling requirements: each strip must be individually sealed in 6.5” x 6.5” heavy-duty resealable bags containing 25 units, packed in sturdy corrugated boxes that support stacking up to 60 inches and must not exceed 20 pounds per package. Each unit must be clearly marked with the vendor name, product name, date of manufacture, lot number, expiration date, and optimal storage conditions, while shipping containers must include handling labels such as “DO NOT CRUSH” and “Fragile.” The product must maintain efficacy for two years at ambient temperatures and under extreme heat and humidity. Inspection and acceptance occur at the destination, USDA APHIS PPQ facility in Edinburg, Texas, with the government retaining full authority to reject noncompliant deliveries based on labeling, packaging, documentation, or failure to meet salient characteristics. Evaluation is conducted using a lowest price technically acceptable (LPTA) method, where technical acceptability is a pass/fail threshold, and award goes to the lowest-priced offer that meets all requirements. Past performance is considered only in the case of a tie. The contract prohibits unfair supplier terms such as indemnification, non-federal jurisdiction
Mrpbs Aamd Contracting

POSTED

4 days ago

DEADLINE

in 11 days
View Details
NAICS: 325320
New
SLED
Modular Building Unit SupplyThe contract requires the supply of a prefabricated modular office unit designed to meet specific structural, dimensional, and utility interface standards for installation at a landfill site in Hawaii. The unit must be fully engineered for immediate deployment, with all necessary connections for power, water, sewage, and communication systems pre-integrated to ensure seamless on-site operation. The solicitation is designated as a subcontract under NAICS code 325320, indicating the focus is on chemical and related manufacturing processes associated with modular construction, and the response deadline is set for August 28, 2026. The project is managed by the County of Maui, with no set-aside provisions specified, and the unit must be capable of withstanding the environmental conditions typical of a landfill application, including exposure to weather, dust, and potential chemical vapors. Delivery and installation must comply with all local regulations and site-specific constraints, and the contractor is expected to coordinate closely with the County of Maui to ensure the unit arrives prepared for immediate use with no additional field modifications required. Although the exact location within the landfill and specific utility capacities are not detailed, the design must accommodate standard operational needs for environmental monitoring or administrative use. The contract does not include information on payment terms, warranty periods, or inspection protocols, but adherence to the technical specifications outlined in the solicitation is mandatory for bid acceptance. Bidders must ensure their proposals align with the functional and logistical demands of the site, emphasizing durability, ease of transport, and regulatory compliance.
County of Maui

POSTED

4 days ago

DEADLINE

in 24 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 336413
New
DIBBS
CARTRIDGE, RESPIRATO
Solicitation # SPE8E6-26-T-3961
This contract specifies the procurement of respiratory cartridges, part number 7000051851 manufactured by 3M Company, with the NSN 4240-01-342-2857, under solicitation SPE8E6-26-T-3961. Each package contains 60 cartridges, and the item is classified as a Type I respirator cartridge with a non-extendable shelf life of 60 months, requiring compliance with NIOSH approval TC-23C-1062. The product must be free of intentionally added mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, and controlled instruments, with additional containment requirements for portable mercury-containing devices per NAVSEA 5100-003D. The contract enforces strict packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129P, with special labeling for shelf life and the prohibition of plastic wrap, cushioning, or dunnage materials whenever possible. Palletization must adhere to DLA Packaging Requirements, and hazardous material shipping protocols are applicable. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. Delivery is FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Five separate delivery lines specify quantities ranging from one to ten packages, with required delivery dates between March and August 2026, and destinations spanning multiple U.S. military installations including Oahu, Offutt AFB, Yokota AB, and Tampa, with explicit instructions against using parcel post in favor of traceable transportation methods. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 423510
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0342
The contract specifies the procurement of aluminum alloy 6061 bar stock with a flat cross section, 0.500 inches thick and 1.250 inches wide, available in whole-foot lengths of 10, 11, or 12 feet, with an approximate weight of 0.735 pounds per foot. The material must conform to SAE AMS4117M Revision M, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper designation of T6, and requires a Certificate of Quality Compliance (mill material certification) to be included with each shipment. All units must be permanently marked with minimum required data including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling; adhesive labels are required for bars under 0.250 inches nominal diameter. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation per ASTM B660 and marking as per MIL-STD-129R, including special code ZZ for preservation and packing. The item is subject to strict compliance with the Qualified Suppliers List for Distributors (QSLD) program; only distributors listed on the QSLD are eligible to supply this product, and any deviation or use of non-approved suppliers constitutes an unauthorized substitution that may result in criminal penalties. Government inspection and quality conformance requirements are waived for QSLD-compliant suppliers. The contract is firm fixed price with zero variance allowed in quantity, and delivery is required within 30 days after award. All shipments must be sent via traceable freight, not parcel post, to the designated DLA depot in Tobyhanna, Pennsylvania, with full compliance to all marking and documentation requirements.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details