Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on October 21, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Inspection and Evaluation, Repair, Upgrade, Training, and Sustainment of Testek Industrial Plant Equipment for COMFRC

Closed
N68335-21-RFI-0018Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off (PTO) system. The scope of work includes disassembling tractor components, replacing friction discs, bearings, oil seals, O-rings, and the clutch release spring, resurfacing the flywheel, and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and disengagement and confirming the PTO system operates correctly under load. This is a small business set-aside solicitation under NAICS code 811310, with a response deadline of November 3, 2026. Bids will be evaluated based on best value, requiring a lump sum fee, itemized costs, warranty information, and proof of necessary qualifications. Submission requirements include a bid sheet, a completed supplier packet with IRS Form W-9, proof of insurance, and applicable SBA certification letters. The contract incorporates various Federal Acquisition Regulation (FAR) clauses regarding small business utilization, equal opportunity, and labor standards, specifically adhering to Wage Determination No. 2015-4687 Revision 31 for Kentucky. Contractors must also comply with strict security protocols regarding non-public information and federal debarment disclosure requirements.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 4 days
NAICS: 811310
New
SLED
Chiller Maintenance Services
Solicitation # 26FS0006
Solicitation 26FS0006 is an Invitation for Bid issued by the California Department of Veterans Affairs (CalVet) for comprehensive maintenance and emergency repair services for chillers, Liebert units, and cooling towers at the Veterans Home of California-Fresno. The contract period is scheduled from January 1, 2027, through June 30, 2030. The scope of work includes annual and quarterly preventive maintenance, one-time evaporator tube cleaning and eddy current testing, and emergency repair services with a required two-hour response time. Key deliverables include annual leak detection reports per AQMD requirements and yearly oil sample lab analysis reports. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Evaluation factors include price, responsibility, and responsiveness, with specific incentives and preferences applied for Disabled Veteran Business Enterprises (DVBE) and certified Small or Micro businesses. To be eligible, contractors must maintain an active C-20 license and technicians must hold EPA Section 608 Universal Technician Certification. Bidders are required to submit a mandatory Rate Sheet, signed Contractor Certification Clauses, and a Bidder Certification via email to Eric Dahmen by the November 4, 2026, deadline. Awarded contractors must adhere to prevailing wage laws under Labor Code Section 1770 and comply with all site security and health requirements at the Fresno facility.
California Department of Veterans Affairs

POSTED

about 4 hours ago

DEADLINE

in 4 days
NAICS: 811310
New
Federal
Crane Hoist and Conductor Bar Upgrade
Solicitation # N6833527Q1037
Solicitation N68335-27-Q-1037 is a combined synopsis and request for quote for a firm-fixed-price contract to upgrade the hoist and conductor bar on bridge crane 148-12 for the Prototype, Manufacturing, and Test Division at the Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey. The project requires replacing an obsolete 3-ton Detroit hoist and 3-wire conductor bar with a new 3-ton wire hoist and 4-wire conductor bar, including a new VFD control panel compliant with NAVCRANECENIST 11450.2A. The contractor must adhere to various standards, including NAVFAC P-307, NAVSEA Publication 0989-030-7000, and NFPA 70. This is a total small business set-aside under NAICS code 811310. Attendance at the site visit on November 12, 2026, is mandatory for all interested bidders, with security information due by November 10, 2026. Quotes are due by 12:00 PM EDT on November 30, 2026, and must be submitted electronically to Danielle Russo. Evaluation will be based on the lowest price among technically acceptable offers, considering the technical description and a capabilities statement not exceeding three pages. Additionally, offerors must self-report a CMMC Level 1 Self Assessment. All shipments are FOB Destination, and final acceptance is contingent upon a successful 125 percent load test performed by government personnel.
Navair Warfare Ctr Aircraft Division

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
Federal
Annual Inspection Maintenance of Manlifts
Solicitation # 70ZH1526QCGA00002
The U.S. Coast Guard Academy in New London, Connecticut, is soliciting a contract for the annual inspection, preventive maintenance, and corrective maintenance of Government-owned mobile elevating work platforms, specifically scissor and boom lifts. The scope of work requires the contractor to provide qualified competent personnel, tools, and consumables to perform services in accordance with U.S. Coast Guard Maintenance Procedure Cards, OSHA 29 CFR 1910.333 standards, ANSI/SAIA A92 standards, and original equipment manufacturer specifications. The contract structure consists of a base year from January 1, 2027, to December 31, 2027, with four subsequent option years extending through December 31, 2031. Annual preventive inspections are established as firm-fixed-price items, while corrective maintenance, troubleshooting, and repairs are ordered on a time-and-materials basis via Government-approved task orders. This acquisition is a 100% Small Business Set-Aside under NAICS code 811310, with a business size standard of 12.5 million dollars. Award will be determined using the Lowest Price Technically Acceptable (LPTA) approach, where technical acceptability is evaluated on a binary acceptable or unacceptable basis. Key deliverables include completed inspection forms, monthly status reports, and the submission of Technical and Equipment Authorization Requests for any identified discrepancies. The contractor is responsible for all quality control and must adhere to strict marking, labeling, and lockout/tag-out procedures. Invoicing must be processed electronically through the Invoice Processing Platform. Quotes are due by November 16, 2026, and must be submitted via email to the designated point of contact.
USCG Academy

POSTED

about 6 hours ago

DEADLINE

in 17 days

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

NJ, USA

Set-Aside

NONE

Documents

1

Appendix+A+for+N68335-21-RFI-0018.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Contacts1 person available
OfficeJOINT BASE MDL, NJ, 08733, USA
Office AddressJOINT BASE MDL, NJ, 08733, USA

Full Description

Show more
PURSUANT TO FAR 15.201(e) - THIS IS A REQUEST FOR INFORMATION ONLY. THERE IS NO SOLICITATION PACKAGE AVAILABLE. The following information is provided to assist the Naval Air Warfare Center Aircraft Division (NAWCAD) Lakehurst, New Jersey in conducting market research of industry on its ability to provide the Government's requirement of the Inspection and Evaluation, Repair, Upgrade, Training, and Sustainment of Testek Industrial Plant Equipment for in support of Commander Fleet Readiness Center (COMFRC) which over sees three (3) major depot level maintenance centers located at Fleet Readiness Center South East (FRCSE), Jacksonville, Florida, FRCE, Cherry Point, North Carolina and FRCSW, North Island, California. The Fleet Readiness Centers (FRCs) are industrial facilities that rework, repair, and overhaul various aircraft, engines and components. To support depot level maintenance operations, various industrial plant equipment, along with industrial plant equipment sustainment efforts, are needed to adequately support and meet fleet aircraft schedules, obtain solution for product lines challenged by obsolescence issues - materially-aged, and technologically-dated industrial plant equipment negataively impacting the command's capacity to support 4th and 5th generation weapon systems. Appendix A lists the Original Equipment Manufacturers (OEM) industrial plant equipment that will fall within scope of this contract effort. This equipment is manufactured by Testek, Avtron, and AAI/ACL Technologies. In 2017, Avtron and Testek merged companies and are now known as Testek Solutions also known as Testek, LLC. In 2009, AAI Corporation exclusively licensed the AAI/ACL technology product lines to Testek. The listed equipment were either designed and/or manufactured by Testek / Avtron who are now Testek Solutions and have exclusive rights to the designs and data in the case of the AAI/ACL technologies equipment. Testek owns all proprietary information ciritcal for the repair and support of all equipment listed in Appendix A. THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued solely for information and planning purposes and is issued in conformance with DFARS PGI 206.302-1; it does not constitute an Invitation for Bid (IFB), a Request for Proposal (RFP), or a Request for Quote (RFQ). This RFI does not commit the Government to contract for any supply or service whatsoever. The Government WILL NOT PAY for any information received in response to this RFI, and the Government will not compensate the respondent for any cost incurred in developing the response to this RFI. Respondents are notified that a formal solicitation may not necessarily result from this RFI. Availability of any formal solicitation may be announced under a separate beta.sam announcement. Any requests for copies of solicitations will not be addressed since this is an RFI, not an RFP. Not responding to this RFI does not preclude participation in any future RFP. Any comments provided may or may not be included in a formal solicitation. The Government will not release any information marked with a proprietary legend received in response to this RFI to any firms, agencies or individuals outside the Government without written permission in accordance with the legend. Please be advised that all submissions become Government property and will not be returned. All interested parties should send company and descriptive literature on currently available products that meet the Navy's requirements, described above. With the response, include a point of contact, phone number, e-mail address, website information, DUNS Number, CAGE Code, and Business Size Status for the North American Industry Classification System (NAICS) code of this RFI. Any responses in reference to this RFI shall be submitted electronically to the Contract Specialist, Ryan Reale, at contact@example.gov with the subject line "N68335-20-RFI-0018 COMFRC Industrial Plant Equipment.

More opportunities from Department Of Defense → Navair Warfare Ctr Aircraft Division

Same awarding agency

NAICS: 333924
New
Federal
Next Generation Bomb Hoist
Solicitation # N6833526R1012
Solicitation N6833526R1012 is a request for proposal issued by the NAVAIR Warfare Center Aircraft Division for a new Indefinite Delivery Indefinite Quantity (IDIQ) contract to manufacture and deliver Next Generation Bomb Hoist (NGBH) support equipment. The scope of work includes the production of 4 Pilot Production Units (PPUs) and up to 940 full rate production units distributed over a five-year period, along with associated technical data and reports. This procurement is a total small business set-aside, requiring both the prime contractor and all subcontractors to be small businesses without exception. The government will award the contract based on best value, utilizing a trade-off process where technical capability and past performance are significantly more important than price. Key technical requirements include compliance with ANSI/ISO/ASQ Q9001-2008 quality standards, specific welding certifications, and the ability to manufacture Critical Safety Items such as the Cable Assembly. Additionally, CMMC Level 2 self-certification is a material condition of award. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by November 16, 2026, at 4:00 PM EST. Pricing for production units is structured using a step-ladder model across five quantity tiers.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 334519
New
Federal
MATS Functional Test Set (FMS)
Solicitation # N6833526Q1183
The Naval Air Warfare Center Aircraft Division is soliciting quotes for a Firm-Fixed-Price contract to manufacture, assemble, inspect, and deliver one MATS Functional Test Set (Part Number 90249, NSN 4920-01-566-8231). This procurement is a 100 percent Small Business Set-Aside under NAICS 334519 and supports the Japan Ground Self-Defense Force MV-22B Block C program via Foreign Military Sales. The required delivery is 26 weeks from the date of award, with inspection and acceptance occurring at the point of origin. To be eligible for award, offerors must be registered in the System for Award Management and provide proof of ISO9001 certification. Because the Technical Data Package contains export-controlled Controlled Unclassified Information, offerors must submit a certified DD Form 2345 and proof of CMMC Level 2 Self-Assessment certification to gain access to the drawings. Additionally, a current NIST SP 800-171 assessment must be posted in the Supplier Performance Risk System. Award will be granted to the responsible offeror proposing the lowest evaluated price who meets all technical and non-price acceptability criteria. Recent amendments have updated the solicitation number to N68335-27-Q-1021 and extended the closing date to November 12, 2026. These updates also included revisions to the Technical Data Package and the Statement of Work to incorporate necessary documentation and drawings. All proposals must be submitted electronically via email to the designated point of contact.
Other Measuring and Controlling Device Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336419
New
Federal
Adapter, Hellfire Missile (Upper) and Adapter, Hellfire Missile (Lower)
Solicitation # N6833526Q1186
The Naval Air Warfare Center Aircraft Division (NAWC-AD) is soliciting quotes for a Firm Fixed Price contract to procure 20 units of Upper Hellfire Missile Adapters (Part 1517AS106-1) and 20 units of Lower Hellfire Missile Adapters (Part 1517AS107-1), along with associated technical data. These items support the AH-1Z and UH-1Y Foreign Military Sales case for the Czech Ministry of Defense. This procurement is a 100% Small Business Set-Aside under NAICS code 336419. The final deadline for submission is November 10, 2026, with all proposals required to be submitted electronically to the point of contact, Juan Carlos Belmonte. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) method. To be considered technically acceptable, offerors must be a certified small business, provide pricing for all CLINs, and commit to a delivery schedule of 90 calendar days after the award date. Due to the presence of Controlled Unclassified Information (CUI) and export-controlled technical data, offerors must provide a certified DD Form 2345 and proof of CMMC Level 2 self-assessment via the Supplier Performance Risk System (SPRS) to access the technical data packages. Additionally, the contract requires strict adherence to MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification. Shipping is quoted as FOB Origin, with hardware delivery to Gulfport, Mississippi, and technical data delivery to Joint Base MDL, New Jersey.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
Federal
HIGH LIFT ADAPTER ADU-954/E, Outriggers, Push Up Adapter
Solicitation # N6833526R1091
Solicitation N68335-26-R-1091 is a Small Business Set Aside for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) fixed-price contract to manufacture and deliver peculiar support equipment for the F/A-18E/F and EA-18G programs. The scope of work includes the production of High Lift Adapter Outriggers (P/N 4097AS265-1), Push Up Adapters (P/N 4097AS200-1), and MHU-191 Munitions Loaders (P/N 3992AS100-1), along with associated Proof Load Certificates. These items are destined for the US Navy, with delivery to Lakehurst, and the Royal Australian Air Force, with delivery to a freight forwarder in California. All equipment must be new, covered by a manufacturer warranty, and adhere to strict marking and packaging standards, including MIL-STD-130, MIL-STD-129R, and ASTM D3951-18. Award will be determined using a best-value trade-off process weighing price and delivery lead time as approximately equal factors. To be technically acceptable, offerors must be registered small businesses in SAM.gov, propose a delivery schedule of eight months or less, and provide a detailed delivery narrative. Critical compliance requirements include CMMC Level 2 certification and a current NIST SP 800-171 assessment recorded in the Supplier Performance Risk System. Proposals must include comprehensive cost and pricing data, with certified data required for thresholds exceeding 10 million dollars. All submissions are due by November 23, 2026, to the designated point of contact.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

3 days ago

DEADLINE

in 24 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS