Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Inspection and Quality Assurance Services (Pre-Delivery)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Non-Destructive Testing (NDT) for OCS ConductorsThis subcontract involves providing independent non-destructive testing and inspection of aluminum conductors for prime contractors working on California High-Speed Rail Authority projects in Wasco, California. The primary objective is to verify that conductors comply with EN/IEC standards by identifying any existing defects, corrosion, or contamination. The selected provider is responsible for delivering comprehensive certified NDT test reports and formal compliance certifications. To ensure technical quality, all personnel performing the inspections must be certified under ASNT Recommended Practice No. SNT-TC-1A. This opportunity falls under NAICS code 541380, with a response deadline set for November 19, 2026.
California High-Speed Rail Authority

POSTED

about 3 hours ago

DEADLINE

in 22 days
NAICS: 541380
New
SBIR / STTR
Optical Performance Validation & TestingThe Optical Performance Validation and Testing subcontract is a U.S. Air Force initiative focused on the independent verification and validation of amplifier performance for prime contractors working on Low SWaP 2-micron fiber amplifier projects. The selected provider will be responsible for characterizing spectral purity, noise figure, and gain using beam profilers and Optical Spectrum Analyzers, ultimately delivering comprehensive performance validation data and technical test reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to support this Department of Defense effort.
U.S. Air Force

POSTED

about 4 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
Federal
Ultrasonic and Dye Penetrant Inspection ServicesThis subcontract for Ultrasonic and Dye Penetrant Inspection Services involves providing non-destructive testing for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes performing ultrasonic inspections on starting materials and dye penetrant surface inspections on finished Union and Tailpiece components. All testing must be conducted using approved UT equipment and PT kits in strict accordance with EB Specification 2937 and NAVSEA T9074-AS-GIB-010-271. The contractor is responsible for delivering all required testing certifications and Certification Data CDRLs utilizing DD Form 1423. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties should note the response deadline of November 9, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in 12 days
NAICS: 541380
New
SBIR / STTR
Laser Testing and Metrology ServicesThe Laser Testing and Metrology Services subcontract is a U.S. Air Force initiative focused on providing independent verification and validation for prime contractors working on laser system projects. The scope of work involves conducting critical technical assessments, including beam profiling, power measurement, and stability testing. These activities are performed within high-power laser safety facilities utilizing specialized equipment such as beam analyzers and interferometers to produce essential performance validation data and technical test reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026, to support the U.S. Department of Defense in ensuring the operational integrity of advanced laser technologies.
U.S. Air Force

POSTED

about 4 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SBIR / STTR
Facility & Equipment Provider
U.S. Air Force

POSTED

about 4 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SBIR / STTR
Power Systems Testing and Validation ServicesThe Power Systems Testing and Validation Services subcontract supports U.S. Air Force Advanced Reserve Power Source Technologies projects by providing scientific testing, characterization, and validation of power source prototypes for prime contractors. The scope of work includes conducting cycle testing, thermal stability analysis, discharge rate testing, and environmental stress screening using calibrated laboratory equipment to deliver essential technical test reports and validation data. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to support the U.S. Department of Defense and the U.S. Air Force in advancing power system technologies.
U.S. Air Force

POSTED

about 4 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SBIR / STTR
Specialized Laboratory / Testing Facility
U.S. Air Force

POSTED

about 4 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SBIR / STTR
TDR Sensor Performance Testing
U.S. Navy

POSTED

about 4 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
Federal
Aviation Component Inspection and Test Services
Ok DLA Aviation At Oklahoma City

POSTED

about 4 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
Federal
Electronic Component Testing and Inspection Services
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SBIR / STTR
Specialized Testing and Validation Provider
U.S. Air Force

POSTED

about 4 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SLED
Materials Testing and Quality AssuranceThe Materials Testing and Quality Assurance subcontract for the Lakehaven Water and Sewer District involves providing independent materials testing services for prime contractors. The scope of work includes testing water distribution materials upon delivery, verifying the grade and density of Hot Mix Asphalt, and confirming the compaction of backfill and Controlled Density Fill. Qualified bidders must utilize an accredited testing laboratory to perform these services and are responsible for delivering all necessary material testing reports and certifications. The response deadline for this opportunity is November 17, 2026.
Lakehaven Water and Sewer District

POSTED

about 4 hours ago

DEADLINE

in 20 days

AI Contract Overview

Show more

The contract seeks services for pre-shipment inspection, sampling, and quality testing of products in accordance with MIL-STD-1916 to ensure full compliance with Qualified Products List requirements and validated shelf-life standards. All work must be performed to verify that delivered items meet rigorous military specifications for performance, durability, and longevity prior to delivery. The scope is focused on quality assurance activities critical to maintaining readiness and operational reliability of defense-supplied goods. This is a subcontract opportunity under the NAICS code 541380, issued by the Fluid Handling Division of the Department of Defense, with performance required in Jacksonville, Florida, 32212-0103. The solicitation was posted on August 4, 2026, and responses are due by August 11, 2026. Interested parties must be prepared to demonstrate technical expertise in military quality standards and the ability to execute precise, documentable inspection and testing protocols under strict timelines. The contract does not specify set-aside status and is available through the DIBBS portal for submission.

General Info

Pre-shipment inspection and quality testing per MIL-STD-1916 in Jacksonville, Florida, due August 11, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-Q-0914.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

O-RING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Conduct pre-shipment inspection, sampling, and quality testing per MIL-STD-1916 to verify compliance with QPL and shelf-life requirements.

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 339999
New
DIBBS
Metal Hose Assembly Manufacturer (NSN 4720-01-547-8193)This subcontract involves the manufacture and supply of 12 specialized metal hose assemblies for prime contractors supporting the Department of Defense Fluid Handling Division. The assemblies must be fabricated in strict accordance with NSN 4720-01-547-8193 and the DLA Master List of Technical and Quality Requirements. Delivery of the completed units is required FOB Origin, with marking and packing adhering to MIL-STD-129 and ASTM D3951 standards respectively. To be eligible, the manufacturer must hold ISO 9001:2015 and JCP certifications, as well as DLA Controlling Authority Authorization. The project falls under NAICS code 339999 and is associated with a performance location in New Cumberland. Interested parties must adhere to the response deadline of October 30, 2026.
All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 423830
New
DIBBS
Supply of Fluid Orifice Plate (NSN 4730017015377)This subcontract through the Department of Defense Fluid Handling Division involves the procurement and delivery of one Fluid Orifice Plate, part number 23509-400-1, with NSN 4730017015377. The item must be manufactured and delivered according to Sargent Aerospace and Defense specifications, while strictly adhering to DLA R001 packaging requirements and the DLA Master List of Technical and Quality Requirements. The contract is designated under NAICS code 423830 and requires delivery FOB Origin within 20 days after the order is placed. Performance for this requirement is centered in Mechanicsburg, Pennsylvania.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326220
New
DIBBS
Supplier of Nonmetallic Medium Pressure Hydraulic HoseThis subcontract involves the supply of rubber-covered, one-wire braid, medium-pressure nonmetallic hydraulic hoses for prime contractors working on Department of Defense Fluid Handling Division projects. The specific requirement is for one Nonmetallic Hydraulic Hose under NSN 4720-01-701-0915, featuring a 2.38 inch inner diameter, a minimum bending radius of 24 inches, and an operating pressure of 350 psi. To ensure quality and safety, the manufacturer must perform burst test certification up to 1400 psi and maintain strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract falls under NAICS code 326220, with the place of performance located at FPO 96678.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
Fluid-Emulsion Spray Nozzle Manufacturer (NSN 4730-01-693-4850)This subcontract involves the manufacture and supply of one fluid-emulsion spray nozzle for prime contractors supporting Department of Defense DLA Land and Maritime fluid handling projects. The nozzle must be fabricated according to NSN 4730-01-693-4850 specifications using non-additive manufacturing processes and must be packaged in compliance with MIL-STD-2073-1E. The selected provider must hold US/Canada Joint Certification Program certification and be authorized to handle ITAR and EAR technical data. Performance will take place at FPO 96691-1500, with a response deadline set for October 30, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326122
New
DIBBS
PLATE, ORIFICE, FLUID
Solicitation # SPE7M3-26-T-7207
Solicitation SPE7M3-26-T-7207 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of one fluid orifice plate. The required item is identified by NSN 4730017015377 and corresponds to Sargent Aerospace and Defense, LLC part number 23509-400-1. The procurement is designated as a small business set-aside under NAICS code 326122. Delivery is required within 20 days after receipt of order, with an original required delivery date of June 29, 2026. The shipping terms are FOB Origin, and the item is to be delivered to the NAVSEALOGCEN Warehouse Operations in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Specific prohibitions are in place regarding the use of Class I ozone-depleting chemicals and the acquisition of munitions list items from Communist Chinese sources. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses covering cybersecurity, whistleblower rights, and the Buy American Act.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326122
New
DIBBS
NOZZLE, SPRAY, FLUID-
Solicitation # SPE7M3-26-T-8106
Solicitation SPE7M3-26-T-8106 is a small business set-aside request for quotation issued by the Department of Defense, specifically the DLA Land and Maritime Fluid Handling Division. The contract is for the procurement of one fluid-emulsion spray nozzle, identified by NSN 4730-01-693-4850. The item is destined for the USS Daniel Inouye DDG 118, with a required delivery date of July 13, 2026, and a delivery window of 20 days after receipt of the order. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. This procurement is subject to strict export controls under ITAR and EAR regulations, requiring offerors to possess an approved US/Canada Joint Certification Program certification and DLA authorization to access technical data. The award process may be automated and includes a price evaluation preference for HUBZone small business concerns. Technical requirements are governed by the DLA Technical and Quality Master List, and items produced via additive manufacturing are ineligible for award. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting standards is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-9886
Solicitation SPE7M4-26-T-9886, issued by the Department of Defense Fluid Handling Division, is for the procurement of one nonmetallic hydraulic hose, specifically a rubber covered, one wire braid, medium pressure hose under NSN 4720-01-701-0915. The technical specifications require an inside diameter of 2.38 inches, a minimum inside bending radius of 24.00 inches, a maximum operating pressure of 350.0 lbs psi, and a burst test pressure of 1400.0 lbs psi. Delivery is required within 20 days after receipt of order, with the destination and acceptance point located at FPO AP 96678. The acquisition is categorized under NAICS code 326220 and incorporates a HUBZone price evaluation preference. Compliance with the Buy American Act and the Berry Amendment is required for quotes above the micro-purchase threshold. Offerors must maintain active registration in the System for Award Management and meet NIST SP 800-171 cybersecurity assessment requirements. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, and all electronic invoicing must be processed through the Wide Area WorkFlow system.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326122
New
DIBBS
PLATE, ORIFICE, FLUID
Solicitation # SPE7M3-26-T-7046
Solicitation SPE7M3-26-T-7046, issued by the DLA Land and Maritime Fluid Handling Division, is for the procurement of one fluid orifice plate, identified by NSN 4730-01-701-5377 and Sargent Aerospace & Defense P/N 23509-400-1. The requirement is categorized under NAICS code 326122. Delivery is required within 20 days after receipt of order, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically the NAVSEALOGCEN Warehouse Ops in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including RP001 for palletization and MIL-STD-129 for labeling. Technical and quality requirements are governed by the DLA Master List, which takes precedence over ASTM D3951. Notably, the use of Class I ozone-depleting chemicals is prohibited. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including those regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-437V
Solicitation SPE7M4-26-T-437V, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for 72 units of air duct hoses (NSN 4720011661104) intended for use with Blackhawk helicopters. Each hose must have a 2-inch inner diameter, an overall length of 26 inches, and include 2-inch soft cuffs on both ends. The procurement is categorized under NAICS 332999, with delivery required within 168 days after order, targeting a need ship date of March 23, 2027, and a required delivery date of May 16, 2027. Shipping is FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, specifically MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must comply with RP001. Contractors are required to use the Wide Area WorkFlow system for electronic invoicing and payment requests. Key compliance requirements include the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Evaluation of offers will exclude items produced via additive manufacturing unless authorized, and a price evaluation preference may be applied to HUBZone concerns.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-27-T-0180
Solicitation SPE7M4-27-T-0180 is a fixed-price Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of five nonmetallic hoses. The required items are identified by NSN 4720015897624 and part number T00250-5083 from HDT Expeditionary Systems Inc. Quotations must be submitted via the DIBBS system by October 16, 2026. The contract specifies a delivery timeframe of 20 days after order, with an original required delivery date of September 30, 2026, shipped FOB Origin to a destination in Grants Pass, Oregon. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 for general packaging and MIL-STD-129 for labeling, with DLA Master List technical and quality requirements taking precedence. Palletization must comply with RP001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The solicitation also incorporates various DFARS and FAR clauses regarding cybersecurity, domestic material restrictions under the Buy American Act and Berry Amendment, and the prohibition of covered defense telecommunications equipment.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326122
New
DIBBS
MANIFOLD, HYDRAULIC SYS
Solicitation # SPE7M3-26-T-9074
Solicitation SPE7M3-26-T-9074 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two hydraulic system manifolds, identified by NSN 4730-01-711-0828 and Polaris Sales Inc part number 1801251. The contract requires delivery to DLA Distribution San Joaquin in Tracy, California, with a need ship date of March 9, 2027, and an original required delivery date of March 30, 2027. Terms are established as FOB Origin, with both inspection and acceptance occurring at the destination. Compliance requirements include adherence to MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for palletization. The contractor must ensure that no Class I ozone-depleting chemicals are used in the items. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses, including safeguarding covered defense information and adhering to the Buy American Act. Offerors must represent their small business size status under NAICS code 326122 and disclose any use of covered defense telecommunications equipment.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-360S
Solicitation SPE7M4-26-T-360S is a fixed-price procurement issued by the DLA Land and Maritime Fluid Handling Division for 12 units of metal hose assemblies, identified by NSN 4720-01-547-8193. The delivery is required within 168 days after order, with a need ship date of February 16, 2027, and a final delivery date of April 30, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. While the contract specifies FOB Destination Other, offerors are instructed to submit quotes based on FOB Origin. The contract mandates strict adherence to quality and technical standards, requiring manufacturers to maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard. Key requirements include supply chain traceability documentation per DLA directives, packaging according to ASTM D3951, and marking in accordance with MIL-STD-129. Due to the nature of the technical data, eligible offerors must possess an approved Joint Certification Program certification and authorization from the DLA controlling authority to access export-controlled data. Administrative compliance requires the use of the Wide Area WorkFlow system for invoicing and receiving reports. The procurement is subject to various federal regulations, including the Buy American Act and the Berry Amendment for domestic material restrictions. Evaluation may include a price preference for HUBZone concerns. Destination inspection is required per FAR 52.246-2, and the contractor must comply with specific DLA Master List technical and quality requirements, including configuration change management and bare item marking.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
DIBBS
Radioactive Materials Notification & Labeling (If Applicable)
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
MIL-STD-129 Labeling and Barcoding Services
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) Services
DEPOT HILL

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Assurance & Inspection Services
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Radioactive Materials Notification and Handling
LAND SUPPLY CHAIN

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Component Testing and Quality Inspection
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Hazardous Materials Compliance & Labeling Services
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Testing Services
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Medical Product Labeling & Compliance Services
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection & Acceptance Sampling
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Packaging and Marking Compliance Services
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
DIBBS
First Article Testing (FAT) Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS