Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Inspection and Quality Verification Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires the performance of 100 percent inspection of bushings to ensure full compliance with specified military standards. Each unit must be verified for correct part number, freedom from defects, adherence to marking requirements under MIL-STD-129, and compliance with preservation guidelines outlined in MIL-STD-2073-1E. The work is classified as a subcontract under the NAICS code 811211 and is being managed by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 15, 2026, and the performance location has not been specified, though the contract is accessible through the DIBBS system with the award number SPEWA626P0207. All inspections must be thorough and documented to meet stringent defense quality assurance protocols.

General Info

100 percent inspection of bushings to meet military standards under DLA subcontract, documented per defense protocols.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPEWA6-26-P-0207.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUSHING, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform 100% inspection of bushings to verify part number, absence of defects, marking compliance (MIL-STD-129), and preservation standards (MIL-STD-2073-1E).

Similar Contracts

Same NAICS industry code

Marine Electronics Warranty and Technical Support

W6QM Micc-Ft Drum

POSTED

DEADLINE

Pressure Transmitter Repair and Modification

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

2-Year Instrument Maintenance Contract

USDA Forest Service

POSTED

DEADLINE

Medical Equipment MaintenanceThis subcontract opportunity for Medical Equipment Maintenance involves performing corrective repairs and preventative maintenance on clinical equipment for prime contractors working on Chesterfield County Sheriff's Department jail projects. The selected provider must utilize calibration tools and replacement parts to ensure all medical equipment is fully functional and must provide detailed maintenance logs as part of the deliverables. Qualified candidates must hold a Biomedical Equipment Technician certification and operate under NAICS code 811211. The solicitation was posted on September 4, 2026, with a response deadline of September 21, 2026. This project is managed by Chesterfield County in South Carolina.

Chesterfield County

POSTED

DEADLINE

Laser System Preventive Maintenance and SupportThis subcontract for the Defense Health Agency Hcd West involves providing ongoing preventive maintenance and technical support for ophthalmic lasers at JB Elmendorf AFB. The selected provider will perform routine calibration and hardware checks using specialized diagnostic tools to ensure the laser systems remain fully operational, with all work documented in detailed maintenance logs. The opportunity is a sole source set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811211. A critical requirement for this contract is that the performing technician must hold manufacturer-certified biomedical technician status specifically for Lumenis systems. The response deadline for this requirement is September 18, 2026.

Defense Health Agency Hcd West

POSTED

DEADLINE

YELL - 17309 - Replace Yellowstone's Mobile and Portable LE RadiosThe Department of the Interior is seeking to replace the existing fleet of Motorola 6000 portable and 6500 mobile radios used by Yellowstone Law Enforcement, as these models are no longer supported by the manufacturer. This requirement is currently listed as a forecast under NAICS code 811211. The procurement process is managed by the National Park Service, with Cam Sholly serving as the primary point of contact. Interested parties can find further details through the acquisition gateway using the reference YELL - 17309.

POSTED

DEADLINE

Certified Small Arms Maintenance and Armorer ServicesThe Certified Small Arms Maintenance and Armorer Services subcontract, issued by the Department of Defense via Navsup Flt Logistics Ctr Norfolk, requires the performance of armorer-level maintenance and repair on NCIS standard-issue weapons and Navy common small arms. The scope of work involves maintaining and certifying platforms from Glock, Sig Sauer, ArmaLite, Mossberg, Benelli, and Remington using manufacturer-specific toolkits. Deliverables include fully maintained and certified weapon systems along with detailed maintenance logs. This opportunity is an 8(a) set-aside under NAICS code 811211, with the place of performance located in Quantico, Virginia. Qualified providers must possess a Secret clearance, NAC suitability, and the necessary manufacturer certifications to perform the work. The response deadline for this requirement is September 16, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

CSM Warranty, Calibration, and Technical Support Services

FA4600 55 Cons Pkp

POSTED

DEADLINE

Hearing Aid Maintenance and Repair

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Emergency Radiology DR Detector Repair and CalibrationThe Department of Veterans Affairs, through Network Contracting Office 6, is seeking a subcontractor to provide emergency repair, diagnostics, parts replacement, and calibration for a Philips Digital Radiography detector. The work will be performed at the Salem VA Medical Center to ensure the equipment is restored to full operational functionality in accordance with medical imaging standards. This subcontract opportunity falls under NAICS code 811211 and was posted on August 26, 2026. The primary objective is to restore critical radiology capabilities through specialized technical services and equipment calibration to maintain patient care standards.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Building Code Compliance and Final Inspection CoordinationThis subcontract, titled Building Code Compliance and Final Inspection Coordination, is issued by the Government of Jamaica through the Ministry of Agriculture Fisheries and Mining. The primary objective of the agreement is to ensure that staircase construction adheres to all applicable local building, fire, and safety codes. The scope of work includes the coordination of any necessary third-party inspections or certifications required to verify compliance. This project is categorized under NAICS code 811211 and was posted on August 24, 2026.

Ministry of Agriculture Fisheries and Mining

POSTED

DEADLINE

Preventive Maintenance of Diesel Standby GeneratorsThe American Consulate Jeddah, under the Department of State, is seeking a subcontractor for the preventive maintenance of low-voltage diesel standby generators. The scope of work includes performing scheduled inspections, fluid and filter replacements, greasing, valve lash adjustments, and critical electrical testing, such as Megger tests, to ensure operational reliability. This opportunity is categorized under NAICS code 811211 and will be performed in Jeddah, Saudi Arabia. Interested parties must submit their responses by the deadline of September 15, 2026, at 2:00 PM.

American Consulate Jeddah

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 21 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of four decals, identified by NSN 7690012629486 and Boeing part number BACM9L10AVM. This acquisition is an FMS requirement for Greece, with a rapid delivery schedule of five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Delivery, inspection, and acceptance are all set as FOB Origin, with the final destination located in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and shelf-life labeling. Palletization must comply with DLA packaging requirements (RP001), and the use of plastics for wrapping or cushioning should be avoided where possible. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions under the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Commercial Printing (except Screen and Books)

POSTED

about 21 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency (DLA) Land and Maritime has issued solicitation SPE7L7-26-Q-2417 for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The requirement specifies a delivery timeline of 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. This contract carries stringent security and regulatory requirements. It requires CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to export control under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the vendor must adhere to MIL-STD-2073-1E Level B for packaging and MIL-STD-129 for marking. Because the items are hazardous materials, the contractor must provide a HAZDEC form and Material Safety Data Sheets in accordance with FED STD 313D and DFARS 252.223-7001.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS