This Solicitation opportunity from Government of Canada was posted on February 17, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Inspection, Testing and Maintenance Services for Emergency Generators & Transfer Switches - Kingston, Ontario

Closed

KN229902_77400SCInternational

Submission Closed03/14/2023, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Extended Warranty Package Provision

Philadelphia Gas Works

POSTED

DEADLINE

Chlorine Evaporator Maintenance and Inspection Services

Ontario Clean Water Agency

POSTED

DEADLINE

Air Compressor Preventive and Corrective Maintenance

POSTED

DEADLINE

RFP 07-135 Roseville Electric Utility – Air Compressor Maintenance

Solicitation # 07-135

The City of Roseville is soliciting proposals under RFP 07-135 for a consultant to provide comprehensive scheduled preventive and corrective maintenance for air compressors and auxiliary systems, including Ingersoll Rand equipment. The services will be performed at the Roseville Energy Park and Sunset Energy Center in California. The selected consultant will be responsible for providing all necessary labor, technical expertise, specialized tooling, and materials. This is a prevailing wage project with an initial contract duration of five years, estimated to commence in April or May. Proposals must be submitted by December 16, 2026, via email to the City Clerk or through physical delivery in a sealed container with the required Attachment H label. The award will be based on a formal evaluation panel process considering the firm's experience and qualifications (25 points), the proposed project plan (35 points), and cost (40 points), with potential interviews for top candidates. Requirements for the successful bidder include obtaining a City of Roseville business license, providing 100% faithful performance and labor and materials bonds, and maintaining specific insurance policies. Consultants must also disclose any conflicts of interest and adhere to the Levine Act regarding political contributions.

POSTED

DEADLINE

Specialized Heat Exchanger Maintenance (Preventive & Corrective)

POSTED

DEADLINE

Compressor Auxiliary Systems Maintenance

POSTED

DEADLINE

Gas Packager Compressor Maintenance Services

POSTED

DEADLINE

Ariel Gas Compressor Maintenance Services

POSTED

DEADLINE

Roseville Electric Utility – Gas Compressor Maintenance

Solicitation # 07-137

The City of Roseville is soliciting proposals for Gas Compressor Maintenance Services to support the Roseville Energy Park and the Roseville Energy Center and RPEAK. The selected contractor will provide all labor, supervision, technical expertise, specialized tooling, equipment, and materials necessary for both scheduled preventive and corrective maintenance on natural gas compressors, specifically Gas Packagers and Ariel models, and their associated auxiliary systems. The contract is intended to run for an initial term of five years, with services estimated to commence in April or May. This is a prevailing wage project requiring adherence to all fair employment laws, with certified payroll required for contracts exceeding 25,000 dollars. The successful proposer must provide a 100 percent Faithful Performance Bond and a 100 percent Labor and Materials Bond. Proposals are due by December 17, 2026, and must include a Proposer’s Certification, a Non-collusion Declaration, a Levine Act Disclosure Statement, and proof of active registration with the California Secretary of State. Award will be made to the responsible proposer determined to be the most advantageous to the City through a formal evaluation panel process. Invoicing is to be submitted monthly, delineated by task and personnel, with payment terms set at 30 days following receipt of satisfactory services.

POSTED

DEADLINE

Vapor Compressor Preventive and Corrective Maintenance

City of Roseville

POSTED

about 5 hours ago

DEADLINE

in about 2 months

AI Contract Overview

Defence Construction Canada is seeking a contractor to provide inspection, testing, maintenance, and minor repair services for emergency generator systems and associated transfer switch gear at CFB Kingston. The scope of work covers 31 buildings across various locations on the base and includes the provision of all necessary labour, materials, supervision, and equipment. The estimated value of the contract is 2,800,000.00 dollars, with a mandatory completion date of March 31, 2026. Due to the nature of the work, the selected contractor must possess a valid Secret level Facility Security Clearance issued by the Canadian Industrial Security Directorate. This procurement follows CFTA, CETA, and GPA guidelines. Interested parties must obtain tender documents through MERX, and all inquiries must be directed exclusively to the designated DCC Contracting Authority to avoid disqualification.

General Info

Generator maintenance and repair for CFB Kingston, $2.8M value, due March 31, 2026.

Agency

Government of Canada → Defence Construction Canada

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

*Ontario (except NCR), CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedFeb 17

Solicitation

Response DeadlineMar 14

Deadline has passed

Submission Closed

03/14/2023, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Defence Construction Canada

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Defence Construction Canada

Office AddressN/A

Contacts

Robin EntwistlePoint of Contact

contact@example.gov

+1 (555) 000-0000

Full Description

DEFENCE CONSTRUCTION CANADA (DCC) – KN229902_77400 – Inspection, Testing and Maintenance Services for Emergency Generators & Transfer Switches – Kingston, OntarioThe work includes, but is not necessarily limited to, the supply of labour, material, supervision and equipment necessary to to undertake the Inspection, Testing, Maintenance and Minor Repair (ITM) of the Department's Emergency Generator Systems and associated Transfer Switch gear located at CFB Kingston. The contract will support 31 buildings at various locations on Base.This project contains security requirements.The selected contractor will be required to hold a valid Facility Security Clearance at the level of SECRET, issued by the Canadian Industrial Security Directorate (CISD) within Public Services and Procurement Canada (PSPC). Details concerning the Security Requirements for this project are identified in the Tender Documents.All tender documents for this opportunity may be ordered from MERX by logging on their website (MERX : Find New Contracts, Bids & Tenders for Canadian Businesses) or by calling 1 (800) 964-MERX (6379).Amendments to the tender documents should be obtained from MERX AS AMENDMENTS OBTAINED FROM OTHER SOURCES MAY NOT BE THE LATEST.Bids from bidders whose name does not appear on the official list of bidders who ordered the tender documents, may be declared invalid.NOTE: There is no scheduled site visit for this opportunity.The estimated cost for this opportunity is in the range of $2,800,000.00The Work must be completed no later than March 31, 2026.This procurement is being conducted in accordance with the requirements set out in Chapter Five of the Canadian Free Trade Agreement (CFTA), Chapter Nineteen of the Canada-European Union Comprehensive Economic and Trade Agreement (CETA) and the World Trade Organization Agreement on Government Procurement (GPA).Please note that the preliminary tender results for this project will be available on MERX.Inquiries relating to this solicitation are to be directed ONLY to the DCC Contact provided above. Bidders who contact anyone other than the DCC Contracting Authority to obtain clarifications during the solicitation period may, for that reason alone, be disqualified.Bidders can obtain contract award results from the DCC website at Contract Activity - Defence Construction Canada (dcc-cdc.gc.ca).