Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on July 19, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Inspection, Testing, Maintenance, Inventory, Tagging, Certification, Marking, Destruction of GVSC MHE

Closed
W56HZV_GVSC_MHE_Follow_OnFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541350
New
MI 2026-07 Quarterly Building Inspection Services
Solicitation # MI 2026-07
Adams and Associates, Inc., operating on behalf of the U.S. Department of Labor, is soliciting bids for quarterly building inspection services at the Miami Job Corps Center in Florida. The contract covers the inspection of eight buildings totaling approximately 132,230 gross square feet, including dormitories, food service facilities, wellness centers, and educational and administrative areas. The period of performance runs from November 1, 2026, to October 31, 2027, with inspections due by the end of each calendar quarter. Detailed reports and corrective actions must be submitted within seven days of each inspection using specific Job Corps forms. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold all necessary professional licenses to operate in the State of Florida. Required insurance includes Workers Compensation, Comprehensive General Liability of $1,000,000 per occurrence, and specific Automobile Liability limits. The agreement is subject to Service Contract Act regulations under Wage Determination No. 2005-2248. Bids must be submitted on company letterhead by October 23, 2026, and include a cost breakdown per quarterly inspection, a W9, a vendor questionnaire, and a statement that the bid remains valid for 90 days. Award selection is based on the most responsible bidder, though the lowest bid does not guarantee selection.
Miami Job Corps Center

POSTED

about 8 hours ago

DEADLINE

in 2 days
NAICS: 541350
New
Federal
H399--Sources Sought Notice - Elevator Inspection Services
Solicitation # 36C24227Q0062
The Department of Veterans Affairs Network Contracting Office 2 is conducting market research via a Sources Sought Notice to identify qualified vendors for elevator inspection services at the James J. Peters VA Medical Center in Bronx, New York. The anticipated period of performance is from December 1, 2026, through November 30, 2027, structured as a 12-month base contract with four option years. The contractor will be responsible for witnessing and certifying annual safety tests and five-year load tests for elevators and dumbwaiters, including Phase I Lobby Key Switch and Phase II Service checks. All work must be performed during regular administrative hours and comply with ASME A17.1, A17.2, A17.3, and A17.4 standards, as well as NFPA and OSHA regulations. Qualified sources must provide proof of QE-1 certification and submit reports using VA Form 10-6167 within 15 working days of inspection. The government is specifically evaluating the viability of set-asides for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) and Veteran-Owned Small Businesses (VOSB) under NAICS 541350. Per VA Notice 852.219-75, the successful contractor cannot pay more than 50 percent of the contract value to firms that are not certified SDVOSBs or VOSBs. Interested parties must submit their organizational details, socioeconomic status, and evidence of past experience by October 23, 2026.
242-NETWORK Contract Office 02 (36C242)

POSTED

1 day ago

DEADLINE

in 3 days
NAICS: 541350
New
SLED
Request For Proposals For Dsa Inspection Services For The Folsom Cordova Unified School District Modernization And New Construction For Various To-Be-Determined Projects
Solicitation # 20261017005
The Folsom Cordova Unified School District is soliciting proposals for DSA-certified inspection services to support various modernization and new construction projects, including the Riverview STEM Academy, Cordova High School, and a new elementary school in the Folsom Planning Area. The selected inspector will act as the District's representative to ensure all construction conforms to contract documents, state codes, and Division of the State Architect (DSA) special requirements. Key responsibilities include providing continuous inspection for concrete, paving, roofing, and structural operations, maintaining updated contract documents for DSA transmission, and reporting any plan deviations. The agreement remains binding through the period of construction or until a Notice of Completion is filed. Qualified candidates must hold a Class 1 Inspector rating, possess at least three years of similar construction experience, and be subject to approval by the DSA, the Architect, and the Structural Engineer. Proposals are evaluated based on experience relative to district needs, qualifications, and proposed fees. Compensation is set at a consultant rate not to exceed 115.00 dollars per hour, with a monthly maximum cap of 19,934.00 dollars. Selected firms must maintain comprehensive general and automobile liability insurance with limits of 1 million dollars per occurrence and 3 million dollars aggregate. Submissions must be limited to 20 pages and delivered in both physical and electronic PDF formats by October 23, 2026.
Folsom Cordova Unified School District

POSTED

1 day ago

DEADLINE

in 3 days
NAICS: 541350
New
SLED
PW77ELEV - 120-55 Queens Blvd. Elevator Modernization
Solicitation # 85027Y0185
The Department of Design and Construction is soliciting a Special Inspector for the PW77ELEV elevator modernization project at 120-55 Queens Blvd in New York. The scope of work involves the modernization of a freight elevator, including the replacement of the machine room equipment with a new PMAC gearless traction machine, controller, hoist cables, and a new cab with a height increase to 10 feet. Additionally, the project requires the installation of position indicator boxes for the existing passenger elevator system. All work must adhere to ASME A17.1/CSA B44 standards, and final acceptance requires field tests witnessed by a New York City Department of Buildings Inspector. The contract is awarded to responsible bidders based on compliance with the Invitation for Bids and favorable pricing. Key administrative requirements include strict adherence to the Davis-Bacon Act for prevailing wages, the HUD Act of 1968 for economic opportunities, and Executive Order 11246 regarding non-discrimination. Performance and payment bonds are mandatory for contracts valued at 1.5 million dollars or more. The selected consultant must provide a staffing plan with qualified personnel meeting Department of Buildings requirements. Payments are processed electronically on a monthly basis via electronic funds transfer, categorized by time card, unit price, or reimbursable services.
Department Of Design And Construction

POSTED

2 days ago

DEADLINE

in 5 days
NAICS: 541350
New
International
Building Services Support
Solicitation # 26-091
The City of Yellowknife is soliciting proposals under solicitation number 26-091 for professional building services support to assist its Building Services team. The primary objective is to secure a qualified firm to provide expertise in Part 3 building permits, with additional support for Part 9 permits, sign permits, demolition permits, and energy efficiency report evaluations. The selected consultant will be responsible for conducting and coordinating plan reviews, providing technical guidance to building inspectors on code interpretations and structural safety, and offering administrative support for both complex and small-scale projects. All work must adhere to the National Building Code of Canada, the National Energy Conservation Code, and the City of Yellowknife's Building and Zoning By-laws. Proposals must be submitted in PDF format via the Bids and Tenders system by November 13, 2026, with services expected to commence by March 1, 2027. Evaluation is based on relevant experience and qualifications (30%), project management approach (25%), cost-effectiveness and fee structure (20%), past performance (15%), and proposal completeness (10%). The successful firm must maintain general commercial liability insurance of at least 2 million dollars and workers compensation. Payments will be made in Canadian currency, and the City retains the right to suspend services at any time without liability for lost profits.
City of Yellowknife

POSTED

4 days ago

DEADLINE

in 24 days
NAICS: 541350
New
SLED
Weston Public Schools District-Wide Facility Condition Assessment
Solicitation # 27-002 BOE
The Weston Board of Education is soliciting proposals under solicitation number 27-002 BOE for a qualified consultant to perform a district-wide facility condition assessment and develop a master facilities plan for the Weston Public Schools campus in Connecticut. The scope of work requires thorough, non-destructive visual inspections of all buildings, parking lots, school grounds, and septic systems to evaluate code compliance, deferred maintenance, and potential hazards. The primary deliverable is a 10-year capital and expenditure plan that includes the estimated remaining useful life of key components and the projected costs and timing for necessary maintenance or replacements. All assessments must adhere to ASTM E2018-24 standards and industry best practices. The contract will be awarded based on a Quality Based Selection process, prioritizing the best combination of price and quality rather than the lowest bid. Evaluation criteria include the consultant's experience, reputation, ability to meet the project schedule, and proposed fee. Proposers must submit a base bid amount and hourly rates for staff. Submissions are due by November 18, 2026, and must include specific documentation such as a non-collusion affidavit, an equal opportunity policy statement, and a history of similar projects. Strict compliance and safety requirements are in place, including mandatory background checks for all personnel in accordance with Connecticut General Statutes Section 10-222c and comprehensive insurance coverage. Required insurance includes Commercial General Liability with a $2,000,000 general aggregate limit, Commercial Automobile insurance of $1,000,000, and Workers' Compensation with $500,000 limits for bodily injury. The Town of Weston and the Weston Board of Education must be named as additional insureds. Andrew Galli serves as the primary point of contact for this solicitation.
DAS Procurement

POSTED

4 days ago

DEADLINE

in 29 days
NAICS: 541350
New
SLED
DFCM Construction - VBS Special Inspection Services - Special Inspection & Testing Services - Utah State University - Animal Science Renovation and Expansion - 26231770
Solicitation # DA27015
The State of Utah Division of Facilities Construction and Management is soliciting proposals for special inspection and testing services for the Animal Science Renovation and Expansion project at Utah State University in Logan. The project scope includes the substantial renovation of the historic Animal Sciences Building, featuring a complete roof replacement and voluntary seismic upgrades, as well as the construction of a new three-story steel and concrete addition with a basement and concrete shear walls. The estimated budget for these services is 192,438.00 dollars, with a performance period starting October 30, 2026, and ending November 1, 2028. Eligible firms must be listed on the DFCM Approved Special Inspection Firms, Material Testing Labs, and Special Inspectors list. Proposals are due by October 29, 2026, via the U3P portal and will be evaluated based on a 90-point matrix covering the statement of qualifications, management plan, distance to the project site, and past performance references. Mandatory submissions include the DFCM Termination or Debarment Form and the Past Performance References Form. Failure to provide these forms or meet the minimum requirement of three collective performance ratings may result in disqualification.
Utah

POSTED

4 days ago

DEADLINE

in 9 days
NAICS: 541350
New
SLED
Fire Sprinkler System Inspections at Southwest Florida International Airport
Solicitation # 2026-089-AM
The Lee County Port Authority is soliciting quotes for solicitation number 2026-089-AM to provide comprehensive annual, semiannual, and quarterly testing of fire safety infrastructure at the Southwest Florida International Airport. The scope of work includes the inspection of fire sprinkler systems, fire pumps, backflow preventers, and specialized suppression systems. Specific focus is placed on sprinkler zones and control valves across the Arrival Level (1st Floor) and Departure Level (2nd Floor), as detailed in the provided Fire Sprinkler Zone Map. Responses are due by November 6, 2026, at 7:00 PM. This is a firm and fixed-price contract requiring adherence to strict federal security regulations and Florida Statutes. Vendors must certify they are not engaged in business operations with Cuba or Syria, are not boycotting Israel, and are not barred from bidding under Florida law. Insurance requirements are stringent, requiring 1,000,000 dollars in Commercial General Liability per occurrence and 5,000,000 dollars in Automobile Liability for Airside Operations Area access. Payments will be processed following the receipt of an acceptable invoice in accordance with Florida Statutes. The Port Authority maintains the right to perform final inspections within 30 days of service completion and may return nonconforming items for correction at the vendor's expense.
Maintenance Systems

POSTED

4 days ago

DEADLINE

in 17 days

General Info

NAICS

541350 - Building Inspection Services

Place of Performance

MI, 48397-5000, USA

Set-Aside

NONE

Documents

1

RFI+Market+Survey+Questions+PCO+Reviewed.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseClosed
Posted

Sources Sought

Deadline changed

Response deadline changed from Jul 6, 2022 to Aug 9, 2022.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W4GG Hq US Army Tacom
Contacts2 people available
OfficeDETROIT ARSENAL, MI, 48397-5000, USA
Office AddressDETROIT ARSENAL, MI, 48397-5000, USA
Contacts
Andrew D. Pokorski
Russell Powledge

Full Description

Show more
The United States Army Contracting Command - Detroit Arsenal (ACC-DTA), is contemplating the award of a Firm Fixed Price non-personal services contract to provide for the inspection, testing, maintenance, inventory, tagging, certification and marking of Slings, Below-the-Hook Lifting Devices, Cranes/Hoists, Forklifts, Jacks, Jack Stands, and other miscellaneous lifting devices owned and or controlled by The Ground Vehicle Systems Center (GVSC). The contractor shall furnish all labor and equipment to complete operations necessary to inspect, perform maintenance, repair, and testing of Slings, Below-the-Hook Lifting Devices, Cranes/Hoists, Forklifts, Jacks, Jack Stands, and other miscellaneous lifting devices as required by Technical Bulletins (TB): TB 43-0142, Safety Inspection and Testing of Lifting Devices, 28 Feb 1997 and TB 43-0156, Stand, Vehicle Supports, July 2010. Inspection/Testing would include: - Magnetic particle crack detection testing (where applicable) - Visual and mechanical inspection for wear, loose bolting, deformation etc. - Findings recorded on certificate of compliance for traceability - ID# metal stamped into each piece (where applicable) - Color coded (ORANGE) padlock seal/sticker applied to each device (color changes annually) - Certificate of compliance form for each piece - Equipment status spreadsheet emailed two weeks following inspection and accessible on-line - Next inspection date to be stenciled on devices (where applicable) Approximately 3,044 pieces (+/- 10%) Includes: Chain/Wire Rope/Nylon Slings, Misc. Lifting Devices, Swivel Rings, Eyebolts, Clevis, Lifting Tackle and Forklift Trucks Front End NDT Inspection etc. Load Testing Approximately, one thousand and six (1,006) pieces (+/- 10%) to be load tested by the contractor (as needed) with documentation, includes: Jacks, Jack Stands and related lifting equipment (Floor Jacks, Bladder - type lifts, etc.) Open to load testing of all pieces or load testing of 10% across all the groups and if issues are identified additional testing from there. The testing manner proposed by contractor should be clearly stated in estimate. Lift Truck Load Tests Contractor shall provide load testing (as needed) for approximately forty (40) lift trucks (+/- 10%) with capacity ratings of no more than 36,000 pounds. Lift Trucks requiring load testing are new forklifts and forklifts with any issues found during inspection. Known load truck quantity is as follows: (1) 8k Forklift (2) 15k Forklift (1) 30k Forklift (1) 3k Forklift (1) 37k Forklift (11) 4k Forklifts (7) Hi-Lo's (7) 6k Forklifts (8) 10k Forklifts (4) 5k Forklifts (1) 12k Forklift (2) CAT 988 RTCH - at Camp Grayling (14) Miscellaneous Forklifts - could be at either Camp Grayling and or Selfridge Air National Guard Base The contractor shall prepare technical reports, summaries, charts, briefing packages, and other written material under this contract, the contractor shall use computer software whose format and version(s) are compatible with that used by GVSC, including the following: Microsoft Windows, Microsoft Excel, and Microsoft Office. Contractor shall be certified with Crane Manufactures Association of America (CMAA), shall be an OSHA certified inspector, and shall be certified with ANSI American National Standards Institute (ANSI). Contractor shall provide all required certifications to the COR and Contracting Officer. Additionally, they shall be certified in magnetic particle inspection, fork lift/lift fork inspection, Workplace Hazardous Materials Information System Training, powered lift truck, fall arrest/life line, and scissor/boom lifts. The contractor shall warranty repairs, markings, and all MHE that is placed in to use, and marking plates, stickers, etc. (capacity ratings) for 365 calendar days. The warranty will begin on the date that each piece of MHE has completed inspection and has been properly marked, as described above and upon Government acceptance of work. Upon completing all inspections, the contractor shall create and submit an EXCEL spreadsheets broken down by building and group (where applicable) to the COR no later than two weeks following completion of inspections (for all equipment both serviced and destroyed). Spreadsheet must be included in binders with that group's reports and checklists and emailed to COR. Upon completion of work contractor will include a total roll up of all work conducted on a separate spreadsheet to include total number of pieces serviced, the total number of each type of piece serviced, total number of pieces destroyed, total number of each type of piece destroyed, any comments for particular situations, and any other information deemed important to the sum scope of the project. Contractor will email this spreadsheet to the COR.

More opportunities from Department Of Defense → W4GG Hq US Army Tacom

Same awarding agency

NAICS: 541715
Federal
Ground Vehicle System Center (GVSC) Commercial Solutions Opening (CSO)
Solicitation # W912CH-24-S-0002
The United States Army Combat Capabilities Development Command Ground Vehicle Systems Center (GVSC) is utilizing a Commercial Solutions Opening (CSO) under solicitation W912CH-24-S-0002 to accelerate the delivery and sustainment of innovative commercial technologies for ground vehicle systems. This multi-phased competitive process, authorized under 10 U.S.C. 3458, extends through 2029 and aims to support Army modernization priorities across various technology focus areas, including power and mobility, autonomous systems, survivability, cyber engineering, and human-machine integration. The CSO is designed to identify solutions that prevent obsolescence and ensure future dominance in the ground domain, with specific interests ranging from high-performance compute solutions and AI-driven cybersecurity to advanced power systems up to 1.5MW and unified combat teaming architectures. The acquisition process follows a structured sequence consisting of solution briefs, presentations, and requests for commercial solution proposals. Awards may take the form of FAR Part 12 commercial procedures, transaction agreements under 10 U.S.C. 4022, or cooperative agreements under 31 U.S.C. 6305, typically resulting in fixed-price contracts. Proposals are evaluated based on technical approach, the realism of the performance schedule, and price fairness. To be eligible for award, companies must be registered in the System for Award Management (SAM) with a Unique Entity ID and utilize the Wide Area Work Flow for invoicing. While the solicitation is ongoing and frequently updated via amendments to add new Areas of Interest, all submissions must remain unclassified.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

28 days ago

DEADLINE

N/A
View Details
NAICS: 336992
Federal
Pilot Production Contract
Solicitation # W912CH-26-R-A029
The U.S. Army is soliciting a sole-source pilot production contract under FAR 6.302-1(ii) and (iii)(A) to General Dynamics Land Systems Inc. with Cage Code 7W356, as the only responsible source capable of meeting the agency’s requirements for future Abrams vehicle production in the M1E3 configuration. This three-year hybrid cost-type contract is designed to enable the transition into full-scale production and will be awarded without competitive bidding due to the unique technical and operational specifications only GDLS can fulfill. While other sources may submit capability statements, proposals, or quotations, they are not expected to satisfy the critical requirements, making this a non-competitive acquisition. The contract will be managed by the U.S. Army Contracting Command at the Detroit Arsenal in Michigan, with performance also centered at this location. The solicitation number is W912CH-26-R-A029, posted on July 9, 2026, and classified under NAICS code 336992 for other defense-related manufacturing. Primary contact for inquiries is Contract Specialist Nicole Young, with Contracting Officer John Finn III also available for coordination. The contract aims to secure the industrial base capacity and technological continuity required to sustain the Army’s heavy armored modernization program through direct support to the M1E3 Abrams production line.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Technical Project Management and Systems Engineering SupportThe contract entails providing technical project management and systems engineering support for integrated technology development initiatives, with a focus on organizing project structures, assembling qualified technical staff, defining management methodologies, and establishing detailed milestone plans to ensure timely and effective execution. The efforts are aligned with the U.S. Army TACOM's objectives, requiring close coordination across technical domains to deliver advanced capabilities under a structured development lifecycle. Performance is centered in Warren, with work directed toward advancing defense-related technological systems through disciplined planning and execution. This subcontract falls under NAICS code 541611, indicating it is categorized as management consulting services, emphasizing the need for high-level planning and oversight rather than direct manufacturing or construction. The solicitation was posted in May 2026 under the Department of Defense, signaling an upcoming procurement opportunity for contractors with proven experience in defense technology integration. While specific funding or award details are not disclosed, the requirement underscores the importance of robust project governance, resource allocation, and the ability to meet defined technical milestones in a federal acquisition environment.
Administrative Management and General Management Consulting Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 334511
Federal
Vehicle Electronics and Architecture DesignThe contract entails the design and development of advanced electronics, communication networks, and vehicle-wide computing architectures for integrated ground systems, with a strong emphasis on cyber-hardened designs to ensure resilience against modern threats. This work focuses on creating next-generation electronic systems that support mission-critical operations across military ground platforms, integrating robust computing frameworks capable of handling complex data processing and secure communications in austere environments. The scope requires cutting-edge engineering expertise in embedded systems, network security, and systems architecture to deliver solutions that are both scalable and survivable under combat conditions. The contract is classified as a subcontract under the NAICS code 334511, which pertains to electronic component and product manufacturing, and is administered by the U.S. Army Tank Automotive Command under the Department of Defense. Performance is slated to occur in Warren, Michigan, a key hub for military vehicle engineering and development. Although specific funding or award details are not outlined, the posting date of May 5, 2026, indicates a forward-looking procurement aimed at sustaining technological superiority in future armored and tactical vehicle platforms. The project demands adherence to stringent defense standards, and successful offerors must possess proven experience in secure system integration, electronic warfare readiness, and compliance with DoD cybersecurity protocols.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Autonomous Ground Vehicle Systems IntegrationThe contract pertains to the development and integration of autonomous navigation, perception, and decision-making systems for unmanned and semi-autonomous military ground vehicles, targeting advanced capabilities to operate in complex battlefield environments. The work involves creating software and hardware architectures capable of real-time environmental sensing, path planning, obstacle avoidance, and tactical decision-making without sustained human intervention, with a focus on reliability, scalability, and interoperability with existing military platforms. The systems must meet rigorous performance standards under adverse conditions, including contested electromagnetic environments and rough terrains, and are intended for deployment across a range of ground vehicle types used by the U.S. Army. This is a subcontract under the Department of Defense, specifically managed by the U.S. Army TACOM headquarters, with the primary place of performance located in Warren. The work falls under NAICS code 541330, indicating it is centered on engineering services, particularly those involving systems integration and advanced robotics development. The contract was posted on May 5, 2026, and while no set-aside designation or point of contact is provided, the nature of the work suggests high confidentiality and compliance with defense contracting requirements, including secure data handling, export control regulations, and potential requirements for personnel clearance. The effort aims to enhance the operational autonomy of future ground forces through cutting-edge AI and sensing technologies integrated into militarized platforms.
Engineering Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 335912
Federal
Advanced Power System Development for Ground VehiclesThe contract involves the design and development of high-capacity power systems capable of delivering up to 1.5 megawatts for next-generation military ground vehicles, with a focus on hybrid, electric, or alternative energy propulsion technologies. These systems must meet rigorous performance, durability, and operational demands specific to modern battlefield environments, ensuring enhanced mobility, reduced logistical footprints, and improved energy efficiency for armored and tactical platforms. The work is classified as a subcontract under the North American Industry Classification System code 335912, indicating specialized electrical equipment manufacturing for defense applications. The project is administered by the U.S. Army Tank-Automotive Command under the Department of Defense, with performance centered in Warren, Michigan, a key hub for military vehicle innovation and engineering. While no solicitation number or set-aside details are provided, the posting date of May 5, 2026, suggests this is a forward-looking opportunity targeting advanced defense contractors with proven expertise in high-power energy systems. The focus on next-generation propulsion implies the need for cutting-edge integration of battery technologies, power electronics, thermal management, and energy recovery systems tailored to the unique constraints of armored vehicles.
Primary Battery Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS