Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on April 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Install Crane Rail Cross Bracing in a Building

Closed
RFISS-166Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238120
New
SLED
REBID: 12" Precast Concrete Curbing for Bicycle Lanes
Solicitation # COC-CIFB-FY26-30953A
The City of Cambridge Department of Transportation is soliciting bids for an on-call, as-needed contract to furnish and install 12-inch Cambridge Type 1 precast concrete curbing for bicycle lanes. The estimated project value is 622,500.00 dollars, which includes an initial one-year term and two optional one-year renewal periods. The contract award is based solely on the Year One Total. The scope of work includes the delivery and installation of approximately 250 curbing units, as well as the removal of 50 units and the resetting of 25 units. All work must be performed under the direction of the Principal Traffic Engineer and adhere to strict technical specifications, including a minimum compressive strength of 5,000 psi at 28 days and a maximum water-cementitious ratio of 0.40. Eligible bidders must demonstrate a minimum of five years of municipal experience and provide at least two government agency references. Submissions must be made via the e-Procurement Portal by September 24, 2026, and must include a bid deposit of at least five percent of the bid value. The successful contractor is required to provide performance and payment bonds and ensure all employees have completed a 10-hour OSHA construction safety course. Compliance with the Cambridge Employment Plan, prevailing wage laws under M.G.L. c.149 and G.L. c30 section 39M, and the Americans with Disabilities Act is mandatory. Payment will be processed through itemized applications submitted to Engineering, with a five-business-day review period for certification.
Traffic, Parking, and Transportation

POSTED

1 day ago

DEADLINE

in 12 days
NAICS: 238120
New
SLED
ITB SPBN262013 B197 Concrete Pad and Structural Metal Overhang (Otis ANGB, MA)
Solicitation # BD-27-1069-MILDV-40000-133298
The Massachusetts Military Division is soliciting bids for the design and construction of a 20ft x 20ft high-performance concrete pad and a corresponding all-metal overhead canopy located behind Building 197 at Otis Air National Guard Base in Massachusetts. With an estimated contract value of 70,000 dollars, the project requires materials engineered for a harsh coastal environment, specifically adhering to ACI 318 exposure categories C2 and F3 to resist corrosion, freeze-thaw cycles, and salt-air. Bidders must attend a mandatory site visit on September 17, 2026, and submit lump sum proposals via the COMMBUYS portal by September 24, 2026. The contract is governed by M.G.L. c. 30 39 M and requires strict adherence to Department of Labor Standards prevailing wage rates and certified payroll. Essential submission requirements include a Certificate of Non-Collusion, a MA Tax Compliance Form, and an Authorized Signatory Listing. Financial security is mandated through a 5 percent bid bond for bids exceeding 50,000 dollars and a payment bond equal to 50 percent of the project cost for projects over 25,000 dollars. Additionally, the awarded contractor must provide liability insurance naming the Commonwealth as additionally insured, ensure all employees have completed a 10-hour OSHA safety course, and comply with REAL ID requirements for base access. The project also specifies workforce utilization goals of 15.3 percent for minority workers and 6.9 percent for women workers.
MILDV - Military Division

POSTED

1 day ago

DEADLINE

in 12 days

General Info

Agency

Department Of Defense → Naval Undersea Warfare CenterView Agency

NAICS

238120 - Structural Steel and Precast Concrete ContractorsView NAICS

Place of Performance

WA

Set-Aside

NONE

Documents

(2)

Draft Statement of Work for Crane Rail Cross Bracing Installation at NUWC Keyport

DOCXsow

RFISS-166 Install Crane Rail Cross Bracing Industry Questionnaire

DOCXsources-sought

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseClosed
Posted

Sources Sought

Amendment 1

Contract was updated

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Undersea Warfare Center
Contacts1 person available
OfficeKEYPORT, WA, 98345-7610, USA
Organization / Agency
Department Of Defense → Naval Undersea Warfare Center
View Agency Profile
Office AddressKEYPORT, WA, 98345-7610, USA
Contacts
CPT John P Gathu

Full Description

Show more

Solicitation Number: THERE IS NO SOLICITATION AT THIS TIME


Notice Type: RFI / Sources Sought


Requisition Number: RFISS-166- Install Crane Rail Cross Bracing In Building


Synopsis:


The Naval Undersea Warfare Center Division, Keyport is issuing this sources sought notice as a means of conducting market research to identify parties having the resources and interest in the installation of additional bracing of crane rails in a building.  The project will require the contractor to relocate existing utilities and weld additional bracing to the crane rails.


The Contractor shall provide labor, materials, and equipment, as required, to accomplish the following work in accordance with the statements here.


1. Relocate existing high pressure air lines and electrical lines as needed to accommodate the additional bracing.


2. Weld new gussets and plate stiffeners,


3. Attach new bolted cross bracing to the gussets.


This request for capability information does not constitute a Request for Proposal (RFP); submission of any information in response to this announcement is purely voluntary and the Government assumes no financial responsibility for any costs incurred.


Please complete the attached " Questionnaire for Industry" word document attached and return via email to john.p.gathu.mil@us.navy.mil  no later no later than the response date and time identified on this notice.


Attachment[s] a " Questionnaire for Industry" word document.


Pursuant to DFARS 204.75 an approved Cybersecurity Maturity Model Certification (CMMC) of Level X (check for each requirement what level of CMMC is required) is required before a contractor can be considered for award. The contracting team will check each offeror's CMMC level in the Supplier Performance Risk System (SPRS) after offers have been submitted but prior to contract award. Any offerors that are determined not to have an approved CMMC will be ineligible for award. For more information on the CMMC requirement, review the following link: https://www.sprs.csd.disa.mil/cmmc.htm


DO NOT INCLUDE ANY CLASSIFIED, CONTROLLED UNCLASSIFIED, OR ARMS EXPORT CONTROLLED DOCUMENTS OR INFORMATION IN YOUR RESPONSE.


CONTRACTORS ARE REQUIRED TO ADHERE TO OPERATIONS SECURITY (OPSEC) REQUIREMENTS.


EXPLANATION OF THESE REQUIREMENTS IS DETAILED IN SECTION I OF THE OPERATIONS SECURITY GUIDE FOR CONTRACTORS AVAILABLE ONLINE AT: HTTP://WWW.NAVSEA.NAVY.MIL/HOME/WARFARECENTERS/NUWCKEYPORT/RESOURCES.ASPX .


CLICK ON THE OPSEC GUIDE FOR DEFENSE CONTRACTORS UNDER THE RESOURCES TAB.


The Government may not respond to any specific questions or comments submitted in response to this sources sought notice or information provided as a result of this sources sought notice.  Any information submitted by respondents as a result of this sources sought notice is strictly voluntary.  This sources sought notice is for information planning purposes, the Government will not pay or otherwise reimburse respondents for information submitted, and it is not to be construed as a commitment by the Government.


All documentation shall become the property of the Government.  The Government is not soliciting, nor will it accept proposals as a result of this sources sought notice.  All firms responding to this sources sought notice are advised that their response is not a request to be considered for a contract award.  If a solicitation is issued, it will be announced later via the Government-wide point of entry and all interested parties must respond to that solicitation announcement separately from the response to this sources sought notice.  Response to this notice is not a request to be added to a bidders list or to receive a copy of a solicitation.




More opportunities from Department Of Defense → Naval Undersea Warfare Center

Same awarding agency

NAICS: 238210
New
Federal
Building 5945 Electrical Upgrade
Solicitation # N0025326Q0010
The Naval Undersea Warfare Center (NUWC) Division, Keyport is soliciting a firm fixed price contract for an electrical upgrade in Building 5945. The project involves the installation of one 1,200A switchgear and two 600A panels, the relocation of existing metering and electrical equipment, and the reconfiguration of breakers within the existing switchgear. This requirement is a 100% small business set-aside under NAICS code 238210. The period of performance was extended via amendment from 180 to 265 calendar days. All work must comply with the National Electrical Code, EM-385-1-1 safety standards, and Davis-Bacon Act wage determinations for Kitsap County, Washington. Award will be based on a Lowest Price Technically Acceptable (LPTA) analysis. To be considered technically acceptable, offerors must demonstrate at least three years of experience in commercial or industrial applications, provide a detailed work plan, and maintain a stable safety record with acceptable DART and TCR rates. Required submissions include a signed SF 1442, a capability statement, and proof of a Washington State business license, all delivered electronically. The contractor is responsible for providing as-built prints, manufacturer manuals, and necessary system training upon completion. Payment will be processed electronically via Wide Area WorkFlow (WAWF) following the acceptance of all project documentation and punch list items by the government.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 238390
New
Federal
Building 206 Lab Upgrade AND Building 233 Breakroom Renovation
Solicitation # N0025326Q0011
The Naval Undersea Warfare Center Division Keyport is soliciting a firm fixed-price construction contract, RFQ N0025326Q0011, for the upgrade of the Building 206 laboratory and the renovation of the Building 233 breakroom and restrooms. The project scope for Building 206 includes asbestos abatement, the installation of Otto Fuel Rated Epoxy Floor Coating, replacement of counters and sinks, and the installation of a new ductless split HVAC unit. The Building 233 project involves the removal and disposal of existing fixtures, cabinets, and plumbing to renovate the breakroom and restrooms, including ensuring ADA compliance. Both projects have a delivery schedule of 270 calendar days from the date of award, with an estimated award date of September 2026. This procurement is a 100% small business set-aside under NAICS code 238390, with an estimated magnitude between $250,000 and $500,000. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. To be considered, offerors must pass technical gates requiring at least three years of experience in commercial or industrial applications, an acceptable past performance rating, and acceptable safety ratings based on DART and TCR data from 2021 to 2025. Contractors must provide key personnel, including a Program Manager, Project Manager, Quality Assurance Manager, and a Site Safety and Health Officer with a 30-hour OSHA construction safety certificate. The contract mandates strict adherence to safety, environmental, and operations security (OPSEC) guidelines, including the use of the Wide Area Workflow (WAWF) for monthly invoicing. A detailed Schedule of Values must be submitted within 21 days of award to facilitate progress payments. Bid bonds are required for proposals of $150,000 or more. All proposals must be submitted electronically, and offerors must maintain active registration and certifications in the System for Award Management (SAM).
Other Building Finishing Contractors

POSTED

3 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS