This Pre-Solicitation opportunity from Department Of Defense was posted on April 13, 2009. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Installation and Integration of Hardware upgrades to the OptiFill II System

Awarded

N62645-09-R-0025Federal

Submission Closed04/24/2009, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333298

Federal

Visible range continuous wave tunable laserThe Department of Commerce is forecasting the procurement of a high-power, single-frequency, continuous wave laser system to support the Nano Spectroscopy Group's research into color center science. This equipment is essential for measuring photoelectrically and optically detected magnetic resonance in diamond as part of the SI-Traceable Vector Magnetometry for Secure Navigation initiative. The required system must be mode hop free and provide gap-free tunable wavelengths across four specific spectral regions: 450-525 nm, 540-650 nm, 900-1050 nm, and 1080-1300 nm, with a power output exceeding 200 mW. The laser will be utilized for photoluminescence and photoelectric spectroscopic studies of semiconductors and diamond under various temperatures and magnetic or electric fields. To ensure operational success, the system must be fully compatible with existing electronic and spectroscopic infrastructure. The performance of this contract will take place in Gaithersburg, and the procurement is categorized under NAICS code 333298.

POSTED

DEADLINE

Zero-Gravity Compatible 3D Print Module Design & FabricationThe NASA SBIR/STTR Program has issued a subcontract for the design and fabrication of a space-qualified 3D print module specifically engineered for manufacturing nanocarbon-infused metals in low Earth orbit. This project requires the comprehensive integration of mechanical, thermal, and electrical systems to ensure functionality in a zero-gravity environment. The contract is designated as a Total Small Business Set-Aside, restricted to firms with fewer than 500 employees. Performance for this initiative is centered in Huntsville, Alabama, under NAICS code 333298.

NASA SBIR/STTR Program

POSTED

DEADLINE

Kitchen Module – Appliance SuiteThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, involves the supply of complete kitchen module appliance suites designed for field deployment. Categorized under NAICS code 333298, the agreement focuses on providing essential culinary equipment necessary for operational readiness in deployed environments. The contract was posted on June 30, 2026, and is tracked via the DIBBS system. It establishes the requirements for delivering specialized appliance suites that meet the rigorous standards of military field operations to support the agency's logistical and sustainment goals.

Defense Logistics Agency

POSTED

DEADLINE

Tray Ration Heater (TRH) Systems SupplyThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, involves the supply of complete Tray Ration Heater Systems along with all necessary collateral equipment. These systems are specifically designed to support field kitchen operations, ensuring the capability to heat rations in tactical or remote environments. The agreement is categorized under NAICS code 333298 and was posted on June 30, 2026. It functions as a procurement effort to maintain essential food service infrastructure for military personnel through the delivery of specialized heating hardware.

Defense Logistics Agency

POSTED

DEADLINE

Visible range continuous wave tunable laserThe Department of Commerce, through the AD for Laboratory Programs, is forecasting the procurement of a high-power, single-frequency, continuous wave laser system to support the Nano Spectroscopy Group. This equipment is essential for research into color center science and the measurement of photoelectrically and optically detected magnetic resonance in diamond, contributing to the SI-Traceable Vector Magnetometry for Secure Navigation initiative. The required system must be mode hop free, provide a power output exceeding 200 mW, and offer gap-free tunability across four specific spectral regions: 450-525 nm, 540-650 nm, 900-1050 nm, and 1080-1300 nm. The laser will be utilized for photoluminescence and photoelectric spectroscopic studies of semiconductors and diamond under various temperatures and magnetic or electric fields. To ensure operational success, the system must be fully compatible with existing electronic and spectroscopic infrastructure. The performance of this contract will take place in Gaithersburg, Maryland, under NAICS code 333298.

AD for Laboratory Programs

POSTED

7 months ago

DEADLINE

N/A

AI Contract Overview

The Naval Medical Logistics Command intends to award a sole source contract to Automed, a subsidiary of AmeriSource Bergen, for the installation and integration of hardware upgrades to the proprietary OptiFill II automated medication dispensing system. The primary objective of this project is to transition the existing obsolete pneumatic powered system to an electric powered system. This upgrade encompasses all necessary hardware to support the new power system, the addition of hand-held restocking terminals, and the replacement of discontinued printers. All components must remain compatible with the OptiFill II system and strictly adhere to FDA requirements for the marketing and delivery of medical products in the United States, regardless of the final delivery location. This acquisition is being conducted under simplified acquisition procedures and the test program for commercial items, classified under NAICS code 333298. While the government intends to negotiate with Automed as the only responsible source, it is accepting capability statements from other interested parties to determine if a competitive procurement is warranted. Interested respondents must submit technical data and cost information via email to the designated contract specialist. The performance of the work is located in Pensacola, Florida, and the procurement is managed by the Department of Defense.

General Info

Agency

Department Of Defense → Naval Medical Logistics Command

Contract Value

$3,762.72

NAICS

333298 - All Other Industrial Machinery Manufacturing

Place of Performance

Pensacola, FL, PENSACOLA, FL, 32512, USA

Set-Aside

NONE

Awardee

GERMFREE LABORATORIES, LLC

Award Issued Date

03/30/2009, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedApr 13

Presolicitation

AwardedMar 30

Contract was awarded

Submission Closed

04/24/2009, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Naval Medical Logistics Command

Contacts2 people available

OfficeFORT DETRICK, MD, 21702-9203, USA

Organization / AgencyDepartment Of Defense → Naval Medical Logistics Command

Office AddressFORT DETRICK, MD, 21702-9203, USA

Contacts

Tameka N Davis

contact@example.gov

+1 (555) 000-0000

Shannon LertoraContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

The Naval Medical Logistics Command intends to negotiate on a sole source basis (IAW FAR 13.500) with Automed (a wholly owned subsidiary of AmeriSource Bergen), 1400 Busch Parkway, Buffalo Grove, IL 60089, as the only responsible source that is capable of properly installing and integrating required hardware upgrades to the proprietary OptiFill II system. Regulatory Requirements: The system and all of the components, shall be compliant with the Food and Drug Administration (FDA) requirements to market and deliver medical products for use in the United States of America, even should delivery be requested outside of the United States. The claims made for the product shall comply with the regulations of the FDA with respect to products for marketing and delivery of a medical product for use in the United States of America, even should delivery be requested outside of the United States. This acquisition is being conducted under simplified acquisition procedures FAR 13.500 under the authority of the test program for commercial items (section 4202 of the Clinger-Cohen Act of 1996). The system upgrade shall be to the existing Amerisource Bergen OptiFill II automated medication dispensing system. The system upgrade shall include transitioning the obsolete pneumatic powered system to an electric powered system. The upgrade shall also include all necessary hardware upgrades to accommodate the new electric powered system and hand-held restocking terminals. The upgrade should also include the replacement of the current printers which have been discontinued by the manufacturer. The system upgrades shall be compatible with the Amerisource Bergen OptiFill II system. There are not set-aside restrictions for this requirement. The intended procurement will be classified under North America Industry Classification System (NAICS) 333298. This notice of intent is not a request for competitive proposals and no solicitation document exists for this requirement. However, parties interested in responding to this notice will need to submit technical data, including cost, sufficient to determine capability in providing the same product. All capability statements received by the closing date of this synopsis will be considered by the Government. A determination by the Government not to compete based on responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. Capability statements shall be submitted by email only as a MS Word or Adobe PDF attachment to Tameka Davis at contact@example.gov No phone calls accepted.