Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Instrument Installation, Calibration, and Technical Training

Active

Federal

Response Deadline08/10/2026, 03:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves on-site installation, system calibration, operator training, and operational readiness verification at the U.S. Army Research Laboratory in Adelphi, Maryland, with a NAICS code of 541330 indicating professional, scientific, and technical services. The work is structured as a subcontract under the Department of Defense, specifically managed by W6QK Acc-Apg Adelphi, and requires all activities to be performed at the designated location to ensure full integration and functionality of the equipment. The provider must demonstrate technical expertise in calibrating complex systems, delivering comprehensive training to Army personnel, and verifying that the installed systems meet operational standards prior to handover. The solicitation was posted on August 3, 2026, with a firm response deadline of August 10, 2026, at 3:30 PM, requiring prompt and precise submission of proposals that address the full scope of technical support. All deliverables must align with U.S. Army protocols and timelines, emphasizing readiness and reliability. While no set-aside provisions are specified, the contract is strictly confined to the Adelphi site, and successful offerors are expected to provide the necessary personnel, tools, and documentation to complete installation and training without disruption to ongoing laboratory operations.

General Info

On-site installation, calibration, training, and verification at U.S. Army Research Lab in Adelphi, Maryland, by August 10, 2026.

Agency

Department Of Defense → W6QK Acc-Apg AdelphiView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Adelphi, MD, 20783, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 03:30:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg Adelphi

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Apg Adelphi

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site installation, system calibration, operator training, and operational readiness verification at the U.S. Army Research Laboratory.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 1 hour ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 1 hour ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is inviting qualified small and disadvantaged businesses, including DBE, SBE, WBE, MBE, and other certified firms, to submit qualifications for participation in the Corydon Well Replacement Design Project under Elsinore Valley Municipal Water District, located in Riverside County and Southern California. The scope of work encompasses a broad range of professional services such as engineering, environmental analysis, surveying, geotechnical studies, permitting, public outreach, and utility location, with relevant NAICS codes covering architecture, engineering, and specialized technical services. The project emphasizes inclusion and compliance with SBA set-asides for Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, as well as DBE status under the Department of Transportation. Firms interested in participating must contact Charlie Brown at charles.brown@ghd.com by August 7, 2026, to request solicitation documents and submit their qualifications package. The deadline to receive all solicitation materials is 5 p.m. PST on Friday, August 14, 2026, with a final response deadline of September 15, 2026. All work is expected to be performed within California, and participation is open to firms certified under federal and state disadvantaged business programs. The opportunity is advertised through the SBA’s opportunity portal, ensuring alignment with federal small business procurement goals.

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCC Engineering Design Services 26-17

The contract seeks engineering design services to develop detailed drawings required for the installation of a lifeboat davit on an existing pier located in Oregon. The project involves providing technical specifications and plans that ensure safe and compliant integration of the davit system with the current pier structure, adhering to applicable maritime and safety standards. All deliverables must be submitted by the deadline of August 6, 2026, and the solicitation is restricted to small business entities including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses as defined by the SBA. The contracting agency is the Tongue Point Job Corps, operating under NAICS code 541330 for architectural and engineering services. The primary point of contact for inquiries is Elizabeth Williamson, reachable via email at williamson.elizabeth@jobcorps.org or by phone at 503-338-5014. The work will be performed on-site in Oregon, though no specific city or zip code is provided. This solicitation is posted under the SBA’s opportunity portal and does not include a physical office address, reflecting its administrative nature. Proposals must demonstrate technical capability to deliver accurate, buildable engineering drawings that meet all regulatory and operational requirements for maritime safety equipment installation.

Tongue Point Job Corps

POSTED

about 5 hours ago

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project, located in Wildomar, California. The scope encompasses structural, geotechnical, potholing, corrosion, architectural, noise, and survey services across two phases: Phase 1 involves design development, technical specifications, and construction management for drilling and abandoning the existing well in compliance with Riverside County and California State Water Resources Control Board regulations; Phase 2 includes detailed engineering drawings, bid document preparation, and full-time engineering support during construction. All work must adhere to federal grant requirements including Buy America provisions, 2 CFR Part 200, and the Build America Act, with deliverables including fully stamped design drawings, a Basis of Design Report, line-item bid schedules, environmental documentation, and a Project Completion Report. The contract, valued at an estimated $2,055,262 in direct costs, is structured as a professional services agreement under a grant administered by the Bureau of Reclamation with payment processed exclusively through the Automated Standard Application for Payments (ASAP) system. The solicitation is exclusively reserved for small business, small disadvantaged business, women-owned small business, veteran-owned small business, service-disabled veteran-owned small business, and DBE firms under the SBA set-aside program, with responders required to maintain a valid Unique Entity ID through SAM.gov and submit full certifications including Conflict of Interest Disclaimer, Insurance Acknowledgment, Public Works Contractor Registration, Iran Contracting Act compliance, and Non-Collusion Declaration. Proposals must follow a strict format ordered across 14 mandatory sections, including resumes of key personnel, three distinct project references, a detailed task-based cost proposal with not-to-exceed limits, and certification of compliance with Section 889 prohibitions against equipment from Huawei, ZTE, Hikvision, Dahua, and other covered foreign entities. Key personnel substitutions require prior written approval from the Elsinore Valley Municipal Water District, and failure to maintain compliance may result in termination for cause. All submissions must be submitted electronically via the PlanetBids Vendor Portal by 10:00 a.m. Pacific Time on September 1, 2026, with no physical or email submissions accepted; responses missing required attachments or failing to meet formatting requirements will be rejected without consideration. The period of performance remains open until awarded, with final execution dates to be inserted upon

Ardurra Group, Inc.

POSTED

about 5 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, entails comprehensive professional design, bidding support, and engineering services during construction for a well replacement initiative located in Lake Elsinore, California. The solicitation, identified as C2305, seeks qualified firms to deliver full-service engineering solutions spanning the planning, design, and construction phases, with a focus on ensuring compliance, efficiency, and seamless project execution. The contract is open to Disadvantaged Business Enterprises in alignment with Department of Transportation set-aside guidelines and falls under NAICS code 541330 for architectural and engineering services. Proposals must be submitted by September 1, 2026, with AKM Consulting Engineers serving as the contracting agency and primary point of contact. Katie Neubauer can be reached for further inquiries via phone or email provided in the solicitation. The project demands technical expertise in water infrastructure, regulatory coordination, and construction oversight, with all work performance centered in Riverside County, California. Interested parties are directed to the official solicitation link for additional details and submission requirements.

AKM Consulting Engineers

POSTED

about 5 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project seeks qualified firms to provide comprehensive professional design, bidding support, and construction engineering services for the replacement of an existing municipal groundwater production well with a new facility on Elsinore Valley Municipal Water District property in California. The project encompasses the full lifecycle of well acquisition, from initial hydrogeological evaluation and aquifer analysis through design, construction, testing, and eventual abandonment of the old Corydon Well. This includes civil, structural, mechanical, electrical, and instrumentation design for site facilities; borehole geophysical logging and soil investigations; regulatory permitting with the State Water Resources Control Board and local agencies; environmental and water-quality sampling; and full-time on-site construction management and hydrogeological oversight during drilling and equipping phases. The design must adhere to AWWA potable water well standards, match the existing casing depth, specify a 24-inch stainless steel Ful-Flo louvered screen, and comply with the Build America, Buy America Act, requiring domestic sourcing of iron, steel, and other construction materials with documented certification and waiver support. The project is funded in part by a $400,000 Bureau of Reclamation grant, triggering full compliance with federal regulations under 2 CFR Part 200, including debarment and suspension requirements, lobbying restrictions, audit rights, record retention for four years, and Davis-Bacon and Clean Air Act provisions that flow down to subcontracts exceeding $150,000. Firms responding must demonstrate relevant municipal water and groundwater project experience, provide detailed qualifications for key personnel including licenses and resumes, submit a transparent cost proposal broken down by task with hourly rates and incidental charges, and confirm availability to meet the November 2026 start and May 2028 completion window. Proposals must include formal certifications for American Iron and Steel compliance, non-collusion under Executive Order N-6-22, debarment and suspension status via SAM, lobbying restrictions, and insurance requirements, all completed as specified in Attachment 2. All submissions must be made through the EVMWD PlanetBids portal by the September 1, 2026 deadline, accompanied by a cover letter, three references, a conflict of interest disclaimer, and DBE subconsultant participation data. Evaluation will prioritize demonstrated competence and qualifications, with equal weight assigned to technical understanding and project approach, experience, schedule feasibility, innovation, cost-effectiveness, and overall proposal quality. The award will be based on best value, not lowest price,

GEI Consultants, Inc.

POSTED

about 5 hours ago

DEADLINE

Request for Proposals for Professional Engineering Staff Augmentation Services

Solicitation # RFP 130-13479

Grant County PUD is seeking proposals for Professional Engineering Staff Augmentation Services under RFP 130-13479, an open solicitation with a clarification deadline of August 20, 2026, and a submission deadline of August 27, 2026. The estimated contract value is provided for informational purposes only and may be subject to change. The request is for qualified firms to provide engineering personnel to support ongoing projects, with all proposals to be submitted offline. Bidders must register and log in to access bid-related communications and question-response details. The point of contact for inquiries is Justin Heilman, District Representative, reachable at jheilman@gcpud.org, with additional procurement support available from Nicona Myers at Nbutler@gcpud.org. The contract is targeted toward organizations capable of delivering skilled engineering resources in Washington State, and prequalification may be required. The solicitation was posted on August 3, 2026, and remains open for bidding.

Grant County PUD

POSTED

about 11 hours ago

DEADLINE

Arc Flash/Coordination Analysis

Solicitation # RFQu 6601-26

The City of Spokane’s Water and Hydroelectric Department is seeking qualified firms to perform an Arc Flash and Coordination Analysis for the Upriver Hydroelectric Project through a Request for Qualifications numbered RFQu 6601-26. The solicitation is open for bidding with a clarification deadline of August 22, 2026, and proposals must be submitted electronically via the city's ProcureWare portal by August 23, 2026, to be considered responsive. All inquiries must be submitted through the clarifications tab on the portal, and bidders are responsible for regularly checking for any addenda or updates. The bid is not subject to a pre-bid meeting, and the work is to be performed at the city’s facility located at 2701 N Waterworks Street in Spokane, WA. The contracting officer for questions related to ProcureWare is Tanya Lester, who can be reached via email at tlester@spokanecity.org or by phone at 509-625-6576. Proposals will be evaluated based on qualifications and experience as outlined in the bid documents, with no specified engineer’s estimate provided.

City of Spokane

POSTED

about 15 hours ago

DEADLINE

Engineering Design and Technical Data ConformanceThe contract requires technical expertise to ensure that manufactured defense components fully comply with the latest revision of technical data, encompassing detailed drawing validation, reverse engineering of existing parts, and design support services. This work is critical to maintaining operational integrity and adherence to defense specifications, where even minor deviations can compromise performance or safety. Contractors must possess the capability to interpret complex engineering documentation and apply precise methods to bring components into full conformance with current standards. The opportunity is structured as a subcontract under NAICS code 541330, indicating professional, scientific, and technical services related to engineering. It is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a response deadline of September 3, 2026, and was posted on August 3, 2026. There is no specified set-aside classification or geographic restriction for performance location, suggesting broad eligibility for qualified subcontractors operating in support of national defense systems. All proposals must demonstrate proven experience in defense-related technical data conformance and engineering validation.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in about 1 month

First Article Testing (FAT) and Certification ServicesThe contract requires the performance of First Article Testing for a shouldered axle, encompassing comprehensive dimensional inspections, material verification, and non-destructive testing to ensure full compliance with specification requirements. All testing activities must be conducted according to established protocols and documented in a finalized report that strictly adheres to the DI-NDTI-80809B format, which must be submitted to the government as proof of conformance. The scope is focused solely on verifying the initial production item to confirm that manufacturing processes and materials meet all technical and quality criteria before full-scale production authorization. This subcontract, issued under NAICS code 541330 by the Department of Defense through the MARITIME SUPPLY CHAIN organization, is targeted for performance in San Diego, CA, with a response deadline of August 8, 2026. The effort is part of a broader government initiative to validate critical aerospace or defense components, and successful execution requires precise adherence to documentation standards and timely delivery of the certified test report. The contract does not include additional services beyond the FAT process and reporting, and all work must support the government’s assurance of component integrity and reliability.

MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Quality Inspection & Testing ServicesThe contract calls for independent origin inspection and testing of connectors to ensure full compliance with Acceptable Quality Level standards and to guarantee zero non-conformances in delivered products. This work is classified as a subcontract under NAICS code 541330 and is issued by the ACTIVE DEVICES DIVISION within the Department of Defense, emphasizing strict quality control requirements for critical components. The inspection and testing must be performed at the source to validate conformance before shipment, with a focus on eliminating defects through rigorous, certified procedures. Proposals are due by August 14, 2026, with the solicitation posted on August 3, 2026, allowing potential vendors a limited window to prepare detailed responses. The place of performance and specific location details are not specified, suggesting the work may occur at the supplier’s facility or other designated origin sites. There is no set-aside information provided, indicating the opportunity is open to all eligible contractors. Interested parties must access the official solicitation through the provided DIBBS link to obtain full specifications and submission instructions, ensuring alignment with the Defense Department’s stringent quality expectations.

ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg Adelphi

Same awarding agency

Unique Item Identification (UII) and Data ReportingThe contract requires the generation and submission of Unique Item Identifier (UII) reports and Data Matrix labels for instruments and their embedded components, strictly in accordance with MIL-STD-130 and DFARS 252.211-7003 standards. This subcontract mandate ensures full traceability and compliance with Department of Defense tracking requirements, where each item must be marked with a machine-readable Data Matrix code containing the mandated UII data elements. The reporting must be accurate, complete, and submitted in the format prescribed by federal regulations to meet accountability and inventory control standards across the supply chain. The solicitation is classified as a subcontract under NAICS code 541370 and is managed by the Department of Defense through the W6QK Acc-Apg Adelphi office, with performance expected to occur in Adelphi, Maryland, zip code 20783. The opportunity was posted on August 3, 2026, and responses are due by August 10, 2026, at 3:30 PM Eastern Time. All proposers must ensure their technical and administrative submissions align with the regulatory framework governing Item Unique Identification, including validation of UII format, Data Matrix symbology, and data content to avoid rejection or noncompliance penalties.

Surveying and Mapping (except Geophysical) Services

POSTED

about 21 hours ago

DEADLINE

Supply Chain Risk Management & Export Compliance ReportingThe contract requires comprehensive supply chain risk management with a focus on identifying, reporting, and mitigating potential threats to the integrity of defense-related supply chains. It mandates strict adherence to DFARS clauses 252.239-7017 and 252.239-7018, which govern cyber information security and the reporting of covered telecommunications equipment and services, as well as full compliance with Section 889 of the National Defense Authorization Act to prohibit the use of certain Chinese-origin telecommunications and video surveillance equipment. The subcontractor must establish and maintain robust processes to monitor, assess, and document supply chain vulnerabilities and ensure that no prohibited components or services are introduced at any level of the delivery chain. Compliance actions must be traceable, auditable, and aligned with Department of Defense standards. The contract is classified as a subcontract under NAICS code 541611, indicating it involves administrative management and general management consulting services tailored to defense and federal compliance needs. It is issued by the Department of Defense under the organization name W6QK Acc-Apg Adelphi, with performance required at Adelphi, Maryland, 20783. Submissions must be completed by August 10, 2026, at 3:30 PM Eastern Time, following the posting date of August 3, 2026. The work demands a high level of technical and regulatory precision, with emphasis on real-time threat detection, documentation of risk mitigation measures, and ongoing reporting to meet federal security requirements. The subcontractor must demonstrate proven experience in defense supply chain security, export compliance, and the operational implementation of DFARS and NDAA Section 889 mandates.

Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

Supply of Microwave-Induced, Nitrogen-Supported Plasma-Based Optical Emission InstrumentThe contract is for the procurement and delivery of a commercial-off-the-shelf plasma-based optical emission instrument that utilizes microwave-induced, nitrogen-supported plasma technology. The instrument must be fully tested and calibrated at the manufacturer’s facility prior to shipment and delivered to Adelphi, Maryland, with a zip code of 20783. This is a subcontract under the Department of Defense, managed by the W6QK Acc-Apg Adelphi organization, and falls under the NAICS code 334510, which pertains to instrumentation manufacturing. The solicitation was posted on August 3, 2026, and responses are due by August 10, 2026, at 3:30 PM Eastern Time. All performance and delivery obligations are tied to the specified location in Adelphi, and the instrument must meet standard commercial specifications without customization beyond factory-established testing and calibration protocols.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE

NIST SP 800-171 Compliance and Cybersecurity SupportThis contract requires the implementation and assessment of NIST SP 800-171 security controls to safeguard covered defense information associated with equipment data and IUID reporting. The work is focused on ensuring full compliance with the NIST framework to protect sensitive data in alignment with Department of Defense cybersecurity mandates, particularly where the handling, storage, or transmission of critical equipment information is involved. The contractor must demonstrate the ability to assess existing systems, implement necessary technical and procedural safeguards, and validate that controls are properly operating and maintained according to NIST standards. The contract is structured as a subcontract under the Department of Defense, specifically managed by W6QK Acc-Apg Adelphi, with performance required at Aberdeen Proving Ground, Maryland 21005. It falls under NAICS code 541512, indicating the scope involves computer systems design and related services. Response submissions must be completed by August 10, 2026, at 3:30 PM, with the solicitation posted on August 3, 2026. There is no set-aside designation specified, and the effort is critical to supporting defense data integrity and cybersecurity posture for systems handling IUID and equipment-related information.

Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

IUID Marking and Data Submission ServicesThis contract requires permanent 2D Data Matrix marking of x-ray systems and plates in compliance with MIL-STD-130 standards, ensuring each item is uniquely identified with machine-readable data. The marking must include specific data formatting according to government requirements and must be accompanied by accurate submission of item information to either the IUID Registry or WAWF system to maintain compliance with Department of Defense asset tracking protocols. The work is classified as a subcontract under NAICS code 811212 and is performance-based at Aberdeen Proving Ground, Maryland, with a response deadline of August 10, 2026. The contracting activity is managed under the Department of Defense through the W6QK Acc-Apg Adelphi office, and all deliverables must meet strict military identity and data integrity standards.

Computer and Office Machine Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

Supply of Industrex Flex HR AP Digital Imaging PlatesThe contract calls for the procurement and delivery of six Industrex flex HR AP digital imaging plates, each requiring individual IUID marking in compliance with Department of Defense standards. These plates are intended for use in digital imaging systems and must be delivered with all associated data submitted to DoD-wide tracking and inventory systems to ensure full accountability and traceability. The requirement is structured as a subcontract under the NAICS code 334517, indicating the focus on photographic and photocopying equipment manufacturing. Performance of the contract is designated to occur at Aberdeen Proving Ground, Maryland, 21005, with all deliverables expected to meet exacting military specifications for durability, compatibility, and identification. The solicitation was posted on August 3, 2026, with a strict response deadline of August 10, 2026, at 3:30 PM Eastern Time, leaving bidders a limited window to submit proposals. Although no specific set-aside designation is indicated, the contract is administered by the Department of Defense through the W6QK Acc-Apg Adelphi office, underscoring its military application and the necessity of full compliance with defense acquisition protocols. All submitted items and data must adhere to DoD requirements for unique identification and electronic reporting, and failure to meet these conditions may result in rejection of the deliverables. The lack of detailed point of contact information suggests the process is handled through centralized systems, and the official UI link provides the sole portal for accessing full solicitation details.

Irradiation Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Industrex HPX-1+ Digital X-Ray Scanning SystemsThe contract calls for the procurement and delivery of two Industrex HPX-1+ digital x-ray scanning systems, with full integration, calibration, and adherence to Department of Defense marking and reporting standards. The systems must be configured and tested to meet DoD-specific operational and compliance requirements, ensuring seamless compatibility with existing defense infrastructure and accountability protocols. All equipment will be delivered to Aberdeen Proving Ground, Maryland, with installation and system validation completed on-site under strictly defined technical specifications. The contract is classified as a subcontract under NAICS code 334517 and was posted on August 3, 2026, with a response deadline of August 10, 2026. It is issued by the Department of Defense through the W6QK Acc-Apg Adelphi office and focuses on enhancing non-destructive inspection capabilities at the Aberdeen Proving Ground facility. Compliance with DoD documentation and asset tracking standards is mandatory throughout the delivery and implementation lifecycle, and the successful vendor must demonstrate proven experience with government-mandated systems integration, secure handling procedures, and technical support readiness.

Irradiation Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE

NOTICE OF INTENT TO SOLE SOURCE: One (1) microwave induced, nitrogen supported plasma based optical emission instrument.

Solicitation # W911QX26QA164

The U.S. Department of Defense, through the office of W6QK Acc-Apg Adelphi in Adelphi, Maryland, has issued a notice of intent to sole source the procurement of one microwave induced, nitrogen supported plasma based optical emission instrument. The solicitation number is W911QX26QA164, with a posted date of August 3, 2026, and a response deadline of August 10, 2026, at 3:30 p.m. ET. This acquisition falls under NAICS code 334516, indicating it is for laboratory analytical instrument manufacturing, and no set aside is being used, meaning the contract is open to any qualified vendor without preference for small or specialized businesses. The instrument will be delivered and performed at the Adelphi, Maryland location, with William Nuamah serving as the primary point of contact for inquiries, reachable via email or phone. The contract type is combined, suggesting it may include elements of both solicitation and award actions, and the intent to sole source implies a unique or proprietary nature of the instrument that limits qualified suppliers.

Analytical Laboratory Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

Notice of Intent to Sole Source for Keysight F8800A PropSim Channel Emulator support subscription

Solicitation # W911QX26QA0186

The U.S. Government intends to sole source a contract to Keysight Technologies, Inc. for support services related to the Keysight F8800A PropSim Channel Emulator located at Aberdeen Proving Ground, Maryland, under the authority of FAR 13.106-1(b)(1)(i), citing that only this vendor can satisfy the agency’s requirements. The contract will cover software upgrades, technical support, calibration, and repair services for the emulator, performed as a single job under a Firm Fixed Price arrangement for a twelve-month period beginning on the date of award. The solicitation number is W911QX26QA0186, with a response deadline of August 10, 2026, and is issued by the Department of Defense, specifically the W6QK Acc-Apg Adelphi office. Although this is a notice of intent to sole source and not a competitive solicitation, any proposals received prior to the deadline will be considered. The North American Industry Classification System code for this action is 811210, and the primary point of contact is Orlando Hernandez, reachable via email and phone provided.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

NOTICE OF INTENT TO SOLE SOURCE: Two (2) Industrex HP-1+ digital x-ray scanning systems & Six (6) Industrex flex HR AP digital imaging plates.

Solicitation # W911QX26QA140

The U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, intends to solely source two Industrex HPX-1+ digital x-ray scanning systems and six Industrex flex HR AP digital imaging plates under solicitation W911QX26QA140. The requirement is classified under NAICS code 334517 and is not subject to any set-aside provisions, indicating open competition limited to a single vendor due to unique technical specifications or proprietary technology. The contract will be performed at Aberdeen Proving Ground in Maryland, with all equipment delivered to meet operational needs at this military installation. The solicitation was posted on August 3, 2026, and responses must be submitted by August 10, 2026, at 3:30 p.m. Eastern Time. Primary point of contact for inquiries is William Nuamah, reachable via phone at 520-672-9609 or email at william.nuamah.civ@army.mil, and all correspondence should be directed through this official channel.

Irradiation Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE

NOTICE OF INTENT TO SOLE SOURCE: One (1) Instron Environmental Chamber

Solicitation # W911QX26QA187

The U.S. Army is seeking to sole source the procurement of one Instron Environmental Chamber under solicitation number W911QX26QA187, with a posted date of August 3, 2026, and a response deadline of August 10, 2026, at 3:30 PM Eastern Time. The requirement falls under NAICS code 334516 for laboratory variable environmental chambers and is not subject to any set-aside provisions. The contract will be managed by the Office of W6QK Acc-Apg Adelphi within the Department of Defense, with performance taking place at Aberdeen Proving Ground in Maryland. The primary point of contact for inquiries is William Nuamah, reachable via email at william.nuamah.civ@army.mil or by phone at 520-672-9609. All proposed responses must be submitted through the SAM.gov portal using the provided uiLink prior to the deadline to be considered.

Analytical Laboratory Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

On-Site Installation & Technical Integration SupportThe contract requires on-site implementation of the VHFLI system at ARL’s facility in Adelphi, Maryland, encompassing full installation, precise calibration, and seamless integration with existing experimental platforms. Technical personnel must ensure compatibility and performance validation under operational conditions, with a strong emphasis on achieving system functionality aligned with experimental requirements. This effort includes comprehensive training for ARL staff on system operation, maintenance, and data interpretation, followed by rigorous verification to confirm successful integration and readiness for routine use. The work is classified as a subcontract under NAICS code 541715, with a submission deadline of August 14, 2026, and is administered by the Department of Defense through the W6QK Acc-Apg Adelphi office. All activities must occur at the designated performance location in Adelphi, and the contractor is expected to deliver not only hardware and software integration but also documented operational verification and trained personnel capable of sustaining the system independently post-handover.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE