This Combined Synopsis/Solicitation opportunity from Department Of Commerce was posted on August 4, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Instrumented Micro Indenter

Closed

1333ND22QNB730384Federal

Submission Closed08/15/2022, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

International

Entanglement Technologies Parts and ConsumablesThis subcontract, issued by the Government of Ontario's Ministry of Environment, Conservation and Parks, involves the supply of specialized parts and consumables for Entanglement Technologies equipment. The selected provider will support prime contractors engaged in environmental monitoring projects by delivering essential components that must strictly adhere to the minimum mandatory requirement specifications outlined in the RFB deliverables. The opportunity was posted on October 20, 2026, with a response deadline of November 4, 2026. Classified under NAICS code 334516, the contract focuses on the procurement and delivery of technical hardware and consumables necessary for the operational success of the specified monitoring systems.

Environment, Conservation and Parks

POSTED

DEADLINE

Pollution Analytical Equipment Parts and ConsumablesThis subcontract, issued by the Government of Ontario's Ministry of Environment, Conservation and Parks, involves the supply of parts and consumables for pollution analytical equipment. The selected provider will support prime contractors on environmental monitoring projects by delivering essential technical components and sensors used in the analysis of pollutants. To be eligible, the provider must adhere to the minimum mandatory requirement specifications outlined in Part 3 of the RFB deliverables. The contract is categorized under NAICS code 334516, with a response deadline set for November 4, 2026.

Environment, Conservation and Parks

POSTED

DEADLINE

Rain Gauge and Data Logger Equipment SupplyThis subcontract focuses on the procurement and delivery of rain gauges and compatible data logging equipment for the Alabama Water Investigations agency. The selected provider is responsible for sourcing and delivering precipitation monitoring hardware that adheres strictly to agency specifications and ensures all equipment is fully functional upon delivery. To qualify, the supplier must provide manufacturer reseller authorization and guarantee that all hardware meets the standards set by the Alabama Department of Finance Administrative Code. The contract allows for delivery either directly to the agency or to designated prime contractors, with all operations falling under NAICS code 334516.

POSTED

DEADLINE

Oil Analysis Autosampler SupplierThis subcontract opportunity, issued by the Department of Defense for W6QM Micc-Ft Drum, seeks a supplier to provide one fully functional compatible autosampler for oil analysis projects. The required system must feature mixing and stirring capabilities, sample induction heads, and a capacity for four 96-position racks to accommodate up to 384 samples. To ensure operational compatibility, the unit must integrate with ASXpress systems for ICP-OES induction according to ASTM D-5185 standards and maintain physical dimensions no larger than 20 by 24 by 24 inches. This procurement is designated as a Total Small Business Set Aside under NAICS code 334516. Interested parties must submit their responses by the deadline of November 14, 2026. The project is associated with oil analysis operations and will be performed in the 85365 zip code area.

POSTED

DEADLINE

Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) SupplierThis subcontract opportunity, issued by the Department of Defense for W6QM Micc-Ft Drum, seeks a supplier to provide one fully functional Inductively Coupled Plasma-Optical Emission Spectrometer for oil analysis projects. The required system must feature a radial torch, radial view, and oxygen burn capability to effectively reduce soot. Technical specifications mandate chiller-free operation and the ability to export data in .csv format for LIMS database entry, while ensuring full compliance with ASTM D-5185 and Caterpillar SOS program standards. The procurement is designated as a Total Small Business Set Aside under NAICS code 334516. Interested parties must submit their responses by November 14, 2026. The equipment will support prime contractors in executing critical analysis tasks, with the place of performance located in zip code 85365.

POSTED

DEADLINE

Low-Range Force Frame Kit

Solicitation # N6426726R1010

Solicitation N6426726R1010 is a request for proposals for a five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to procure Low-Range Force Frame Kits (FFK) for the Naval Surface Warfare Center, Corona Division. The government intends to purchase a minimum of two and a maximum of 45 kits to support Navy fleet Calibration Laboratories. These kits must provide a stable platform for mounting and aligning force gages and dynamometers, adhering to Calibration Standards Specification (CSS) 06-3228 and MIL-PRF-28800G Class 4 environmental standards. Key deliverables include the hardware, a transit case with specific gasket and fastening requirements, COTS operator and service manuals (CDRL T001), and a repairable parts list (CDRL A001). All equipment must feature permanent identification plates and two-dimensional Unique Identification (IUID) data matrices conforming to MIL-STD-130N. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis, evaluating proposals on total price and a technical rating of acceptable or unacceptable. Technical evaluation includes a review of the offeror's past performance using up to three references from the last three years. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) portal by October 21, 2026. Required submission documents include a completed Cross Reference Matrix in Microsoft Excel, pricing for all CLINs, and a Small Business Subcontracting Plan for offerors other than small business concerns. Delivery is required within 120 calendar days from the issuance of a delivery order, with shipments sent FOB Contractor Destination.

Naval Surface Warfare Center

POSTED

DEADLINE

SERVICE AGREEMENT FOR RAITH VOYAGER

Solicitation # N00173-27-Q-1301395177

Naval Research Laboratory

POSTED

DEADLINE

Off-Axis Parabolic Mirrors

Solicitation # FA860127Q0003

The Air Force Life Cycle Management Center, on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify qualified sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are intended for use in the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a 30mm diameter fused-silica substrate with a parabolic focus at 45 degrees, a surface roughness of less than 1nm RMS, and a scratch/dig specification of 20-10. The required protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance, and transportation to Wright-Patterson Air Force Base, Ohio. Key deliverables include the mirrors and comprehensive test data, including certificates of conformance and surface-measurement data. Delivery is required within 98 calendar days after receipt of order, and the equipment must be warranted against defects for two years following receipt. Payment terms are set at 100 percent after delivery, net 30 days from the invoice date. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026.

POSTED

DEADLINE

Flight Model Solar Array Wings

Solicitation # 80NSSC27946791Q

NASA/NSSC is seeking capability statements for the procurement of flight-qualified solar array wings for the TERP RAPTOR 12U CubeSat mission to asteroid Apophis. The requirement includes the acquisition and delivery of one flight model consisting of two solar array wings, each featuring 20 solar cells, hinges, spacers, and a thermal knife deployment system. The scope of work encompasses a comprehensive test campaign involving vibrations, TVAC, and bake-out tests, as well as the delivery of interface documentation, software, and calibration data. The contractor must also provide technical support during solar panel acceptance, spacecraft integration, and initial functional verification at the NASA Goddard Space Flight Center in Greenbelt, Maryland. This procurement is being conducted under FAR Part 12 for commercial items, with a planned period of performance for unit testing and integration from July 1, 2027, through October 31, 2027. While NASA/NSSC intends to issue a sole source contract to DHV Technology under FAR 12.102(a), they are currently requesting capability statements to determine if the procurement should be conducted on a competitive basis. Interested parties must submit their qualifications in writing to the designated point of contact by October 28, 2026. Please note that quotes will not be evaluated at this stage, and all correspondence must reference the notice ID 80NSSC27946791Q.

National Aeronautics And Space Administration

POSTED

DEADLINE

ICP-OES for Oil Analysis

Solicitation # W911S227U0057

Solicitation W911S227U0057 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of new equipment for the material analysis lab at Yuma Test Center. The requirement consists of one Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) and one compatible Autosampler. The ICP-OES must feature a radial torch with radial view, oxygen burn capability, chiller-free operation, and the ability to export data via .csv for LIMS database entry. The Autosampler must include mixing and sample induction heads, a capacity for up to 384 samples across four 96-position racks, and dimensions not exceeding 20 by 24 by 24 inches. Both pieces of equipment must be designed to meet ASTM D-5185 and Caterpillar SOS program performance standards. This procurement is a Total Small Business Set-Aside under NAICS code 334516. The solicitation is brand name or equal, specifically referencing Perkin Elmer for the ICP-OES and Teledyne Cetac for the Autosampler; any equal products must meet all salient physical and functional characteristics and be supported by descriptive literature. Award will be granted to the responsible offeror deemed most advantageous based on price and technical merit. Quotes must be submitted via the PIEE Solicitation module, with a preferred delivery time of 30 days on an F.O.B. destination basis. Only new equipment will be accepted, and offerors must provide certifications regarding the country of origin as part of the Buy American and Balance of Payments Program requirements.

POSTED

DEADLINE

HIGH PRESSURE/ TEMP MICROWAVE DIGESTION SYSTEM

Solicitation # FA857127Q0006

Solicitation FA857127Q0006 is a Request for Quote issued by the Department of Defense for the procurement of a High Pressure, High Temperature Microwave Digestion System, specifically an Ultrawave 3 ECR Digestion System with a Single Reaction Chamber or Pressurized Digestion Cavity classification. The contract includes the provision of all necessary materials, equipment, travel, labor, installation, and training for the Maintenance Support Group at the Warner Robins Air Logistics Complex, Robins Air Force Base, Georgia. This is a firm-fixed-price effort set aside for Economically Disadvantaged Women-Owned Small Businesses. The government will award the contract based on the Lowest Price Technically Acceptable (LPTA) basis, evaluating quotes on technical acceptability via a pass/fail basis, price fairness, and past performance. The successful contractor must coordinate delivery and installation within five business days of award, with all work completed within 90 days. Key requirements include CMMC Level 1 certification, the submission of a Contractor's Safety Plan, and compliance with Item Unique Identification (IUID) marking. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotes are due by October 26, 2026.

FA8571 Maintenance Contracting Afsc Pzim

POSTED

DEADLINE

Automatic Particle Counter (APC) System SupplyThis subcontract involves the manufacture and supply of 150 Automatic Particle Counter units intended for prime contractors working on Department of National Defence aviation projects in Canada. These units are designed for the real-time contamination analysis of hydraulic systems and aviation fuels, ensuring strict adherence to ISO 4406:2021 and ISO 11171:2022 standards. The technical specifications require the units to feature high-contrast interfaces, rechargeable battery packs, and specific durability ratings, including IP54 for operation and IP66/67 for storage. Each of the 150 delivered units must be equipped with Identification Data Plates to meet the contract requirements.

Department of National Defence

POSTED

1 day ago

DEADLINE

in 19 days

General Info

Agency

Department Of Commerce Nist

Contract Value

$115,130

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Gaithersburg, MD, 20899, USA

Set-Aside

SBA

Awardee

NANOVEA, INC.

Award Issued Date

08/29/2022, 12:00:00 AM UTC

Documents

Provisions+and+Clauses.pdf

Statement+of+Requirements+-+22-01965_AN.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedAug 4

Combined Synopsis

Response DeadlineAug 15

Deadline has passed

Submission Closed

08/15/2022, 03:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Commerce Nist

Contacts2 people available

OfficeGAITHERSBURG, MD, 20899, USA

Organization / AgencyDepartment Of Commerce Nist

Office AddressGAITHERSBURG, MD, 20899, USA

Contacts

January Magyar

Keith Bubar

Full Description

This is a Combined Synopsis / Solicitation for Commercial Items prepared in accordance with the format in FAR Subpart 12.6 - Streamlined Procedures for Evaluation and Solicitation of Commercial Items - as supplemented with additional information included in this notice. The solicitation is issued using simplified acquisition procedures under the authority of FAR Part 13. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION. QUOTATIONS ARE BEING REQUESTED AND A WRITTEN SOLICITATION DOCUMENT (i.e. STANDARD FORM) WILL NOT BE ISSUED. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-04 dated 01-30-2022. The associated North American Industrial Classification System (NAICS) code for this procurement is 334516, Analytical Laboratory Instrument Manufacturing. The small business size standard is 1,000 employees. This acquisition is 100% set aside for small businesses. DESCRIPTION OF REQUIREMENTS Background The National Institute of Standards and Technology (NIST) Engineering Laboratory Materials and Structural Systems Division (MSSD) requires an instrumented micro indenter. The instrumented indenter must have the capability of measuring both the hardness of a material and elastic modulus. In addition to the traditional method of using an optical microscope to measure the size of the indent to calculate hardness, the indenter must measure load versus displacement, which can be used to calculate the elastic modulus. The other required feature is that with a motorized x-y stage, the indentation process is automated so that high through put experimentation is available for either an array of samples or multiple measurements on a single sample that has different properties as a function of distance. This indenter must be able to be used with various materials including ceramics, concrete, metals, and polymers. Objectives The scope of this procurement is the provision of one (1) micro indentation tester, one (1) module for acoustic sensing and one (1) module for micro friction sensor, meeting the minimum specifications in the Statement of Requirements, inclusive of FOB Destination delivery, installation, and warranty. Required Specifications Please see the attached Statement of Requirements for details. DELIVERY/PERIOD OF PERFORMANCE Delivery shall be FOB Destination and not later than 2/1/2023. Installation shall be within four (4) weeks after delivery to NIST. See Statement of Requirements for additional, specific delivery instructions. PAYMENT TERMS The Contractor shall be paid, in accordance with Net 30-day payment terms, upon receipt and acceptance of a proper invoice, in accordance with the following schedule: 100% after installation and acceptance by the COR of a fully installed system, AND After successful completion of the testing requirements and successful demonstration that the instrumentation performs IAW the technical requirements set forth in the Statement of Requirements NOTE: Partial shipments and partial invoices will not be accepted, unless otherwise requested and accepted by the Contracting Officer prior to award offer. Proposed payment schedules shall be submitted with quoter's response to the RFQ for consideration. APPLICABLE PROVISIONS AND CLAUSES Please see the attached document for applicable provisions and clauses. QUESTION AND ANSWER PERIOD CAR 1352.215-73 INQUIRIES (APR 2010): Quoters must submit all questions concerning this solicitation in writing electronically to Ms. January Magyar, Contract Specialist, at january.magyar@nist.gov. Questions must be received by or before August 10, 2022 at 5:00 PM ET. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract. (End of Provision). DUE DATE FOR QUOTATIONS All quotations must be submitted via email to Ms. January Magyar, Contract Specialist, at January.magyar@nist.gov. Submission must be received not later than August 15, 2022 at 11:00 AM ET. REQUIRED SUBMISSIONS 1. For the purpose of evaluation of Technical Capability: Documentation and product literature, which clearly demonstrates that the items being quoted conform to the requirements identified herein. Documentation shall discuss specifications and warranty of the quoted products, demonstrating a line-by-line compliance with the specifications detailed in the Statement of Requirements. 2. For the purpose of evaluation of Price: A firm-fixed price quotation in accordance with the required line-item structure noted below. Any shipping/delivery fees must be included in the quotation. 3. Contractor Unique Entity Identifier (UEI) UEI shall be used to verify the quoter's active System for Award Management (SAM) registration. Quoters must have an active registration at www.SAM.Gov to be considered for award. 4. Completed Provisions Please complete the highlighted areas in the applicable provisions and clauses documents and return with submissions. CONTRACT LINE ITEM STRUCTURE: Responsible Quoters shall provide pricing for the following line item: LINE ITEM 0001: Delivery of one (1) Indentation Tester, meeting the minimum specifications in the Statement of Requirements, inclusive of any Delivery Fees LINE ITEM 0002: Delivery of one (1) Module for Acoustic Sensing, meeting the minimum specifications in the Statement of Requirements, inclusive of any Delivery Fees LINE ITEM 0003: Delivery of one (1) Module for Micro Friction Sensor, meeting the minimum specifications in the Statement of Requirements, inclusive of any Delivery Fees EVALUATION CRITERIA AND BASIS FOR AWARD In accordance with FAR 52.212-2: Evaluation - Commercial Items as included in the attached Applicable Provisions and Clauses document, the Government intends to award a purchase order resulting from this solicitation to the responsible quoter whose quotation, conforming to the solicitation, is the Lowest Price, Technically Acceptable quote. Technically acceptable means that the quotation meets the following requirements: 1. A quotation will only be considered technically acceptable if it clearly demonstrates compliance with the attached Statement of Requirements, provides a firm fixed price for the CLINs as a whole and includes installation and a warranty. Quoter must provide technical documentation which clearly supports that the item quoted is in fact in compliance with the Statement of Requirements. 2. Quotation meets delivery requirements (Delivery NLT 2/1/2023) Price will be evaluated for reasonableness.