Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

INSULTING WASHERS

Active
N0016426Q0275Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting hydrophone backing plates under a sole-source procurement with limited competition, identified by solicitation number N00164-26-Q-0275 and NAICS code 335932. The procurement is authorized under FAR 13.106-1 and is restricted to previously tested and approved vendors—Brownstown Quality Tool & Automation, LLC, Wagler Competition Products, and Stark Precision Machine—who are the only entities eligible to submit offers. Although other responsible sources may submit capability statements, the Government retains full discretion to proceed without full competition based on its evaluation. The requirement is classified under FSG 5970 and involves specialized components critical to naval operations. Offerors must be actively registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) to access controlled documentation and be considered for award. The solicitation was issued on July 31, 2026, with responses due by 4:00 PM Eastern Time on August 6, 2026. All submissions must be emailed directly to Cierra Vaughn at cierra.n.vaughn2.civ@us.navy.mil and include all required documentation. Potential vendors are responsible for regularly monitoring sam.gov for any amendments or updates prior to the deadline; changes issued after the closing date will only be shared with submitting offerors. This action falls under FAR Part 13 simplified acquisition procedures and is exempt from public synopsis under FAR 5.202(a)(13). The place of performance is Crane, Indiana, and the contracting office is within the Department of Defense. No set-aside status applies to this procurement.

General Info

U.S. Navy seeks hydrophone backing plates from three approved vendors via sole-source procurement under FAR 13, due August 6, 2026.

Agency

Department Of Defense → Nswc CraneView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

Crane, IN, 47522, USA

Set-Aside

NONE

Documents

(2)

Solicitation+-+N0016426Q0275.pdf

PDF

26Q0275_syn.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
Contacts1 person available
OfficeCRANE, IN, 47522-5001, USA
Organization / Agency
Department Of Defense → Nswc Crane
View Agency Profile
Office AddressCRANE, IN, 47522-5001, USA
Contacts
Cierra Vaughn
contact@example.gov

Full Description

Show more

N00164-26-Q-0275 – SOLE SOURCE – INSULTING WASHERS – FSG 5970 - NAICS 335932


ISSUE DATE 31 JUL 2026 – CLOSING DATE 06 AUG 2026 – 4:00 PM Eastern Time



ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane has a requirement for Hydrophone Backing Plates.



The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with, Brownstown Quality Tool & Automation, LLC, Brownstown, IN, Wagler Competition Products, Odon, IN, and Stark Precision Machine, Terre Haute, IN, under the authority of FAR 13.106-1. This is limited competition because the program is required to source materials from previously tested and approved vendors. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.



Contractors must be properly registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) in order to receive the controlled attachments. Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via https://sam.gov. Information about the JCP is located at https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx.  The controlled attachments will be posted at the same time as the solicitation is posted.  



This solicitation is being issued pursuant to the procedures at FAR Part 13.  Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-26-Q-0275 is hereby issued as an attachment hereto. 



Contract Opportunities on https://sam.gov/ has officially replaced FBO.gov



All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/.  It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation. 



For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award.



Offers shall be e-mailed to cierra.n.vaughn2.civ@us.navy.mil.    All required information must be received on or before 06 AUG 2026 4:00PM EASTERN TIME.


Similar Contracts

Same NAICS industry code

NAICS: 335932
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A6-26-T-09FK
This contract requires the supply of electrical insulation sleeving as a qualified product listed under the Performance Review Institute’s QML or QPL program, meaning only manufacturers or assembler-distributors listed on the official DLA-recognized qualified lists may supply the item. The product must conform to SAE AS23053/1 Revision A dated March 1, 2018, and comply with MIL-STD-129R(3) for marking, with a Type II shelf life of 12 months extendable as per code 4 standards, clearly marked with special code 33. The material must be supplied on reels or spools, each packaged and labeled in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including 2D Data Matrix barcodes, and palletized using DLA’s RP001 packaging requirements. Zero non-conformance sampling per MIL-STD-1916 or ASQ H1331 is mandated, with any unspecified attributes treated as major and requiring zero defects in sampled lots. Mercury or mercury compounds are prohibited except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or naval chemical reagents, and where used, portable devices must include a second containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the delivery point in Kings Bay, Georgia, with a 20-day delivery window from order date and a quantity variance of plus 10 percent and zero percent reduction. All shipping and marking must adhere to DoD standards including hazardous material labeling under 29 CFR 1910.1200 and full compliance with DLA’s electronic invoicing system WAWF. The contract includes stringent cybersecurity mandates under DFARS 252.204-7012 and 252.240-7997 requiring compliance with NIST SP 800-171, immediate cyber incident reporting, and an assessment of the contractor’s information system controls. Additionally, the contractor is prohibited from using covered telecommunications equipment from designated foreign vendors under DFARS 252.204-7018 and must ensure all subcontractors adhere to the same restrictions. Offerors must hold a valid UEI and CAGE code, qualify as a small or other-than-small business, and affirm compliance with ethics provisions prohibiting compensation of
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335932
New
DIBBS
Electrical Insulation Sleeving Manufacturing and Supply
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
High-Performance Insulation Sleeving ManufacturingThe contract requires the manufacture of 29 units of military-grade insulation sleeving designated by NSN 5970-12-412-0450, adhering to zero-defect quality standards and all technical specifications mandated by the Defense Logistics Agency. The product must meet rigorous performance criteria to ensure reliability in defense applications, with strict compliance expected throughout the production process. The work is classified as a subcontract under NAICS code 335932 and is being managed by the ASC Commodities Division of the Department of Defense, with performance required at the facility located in New Cumberland, Pennsylvania, zip code 17070-5002. Responses must be submitted by the deadline of August 7, 2026, with the solicitation originally posted on July 30, 2026. The nature of the procurement indicates an urgent operational need, emphasizing precision, timeliness, and adherence to stringent defense standards. The contract is not subject to any specific set-aside provisions, and all interested parties must ensure full alignment with DLA technical requirements to qualify for award. The official solicitation details are accessible via the DIBBS platform at the provided link.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A6-26-T-10ZY
The contract pertains to the procurement of insulation sleeving identified by part number 223-0160-9001 and NSN 5970-12-412-0450, supplied by NORRES SCHLAUCHTECHNIK GMBH CO KG. A total of 29 units are required at a unit price of $29.00, with no variance allowed in quantity. Delivery is to be made FOB origin within 322 days of the contract award, with inspection and acceptance occurring at the manufacturer’s location. The item is classified as a critical application item and must comply with strict technical and quality requirements referenced from the DLA Master List, including MIL-STD-1916 or ASQ H1331 sampling procedures with zero non-conformances required unless otherwise specified. Quality assurance follows SAE AS9100 standards, and packaging must fully adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes required. Palletization complies with DLA packaging guidelines, and the item has no shelf life restriction. The shipment must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation protocols are governed by specific DLAD procedural notes. Contract data indicates the solicitation was issued on July 30, 2026, with a response deadline of August 7, 2026, under NAICS code 335932 for other electrical equipment and component manufacturing, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
INSULATING COMPOUND
Solicitation # SPE4A6-26-T-10QF
This contract specifies the procurement of an electrical insulating compound identified by NSN 5970-01-013-8611, categorized as a commercial off-the-shelf (COTS) item meeting MIL-I-46058C specifications and qualified under QPL 46058, Type UR. The product is classified as a Type I item with a non-extendable shelf life of 18 months, requiring strict adherence to shelf-life controls and special marking per code 32. The compound is designated as a hazardous material under DOT Class 3, shipping name RESIN SOLUTION UN1866 PG III, and must comply with full hazardous communication standards including approved SDS and OSHA hazard warning labels reviewed and submitted to DLA Aviation HMIRS prior to award. Mercury and mercury-containing compounds are prohibited unless functionally necessary in specified devices, and any portable instruments containing mercury must include double containment as per NAVSEA 5100-003D. The item must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with palletization following DLA packaging requirements. Inspection and acceptance occur at the manufacturer’s origin using zero-defect sampling under MIL-STD-1916 or ASQ H1331, with critical attributes assigned verification level VII and an AQL of 0.1. Delivery is required within 20 days FOB destination for two separate consignments—one to USCG Training Center in Yorktown, Virginia, and another to USS Wasp (LHD 1) via vessel shipment—both subject to zero quantity variance. Shipment must occur via the fastest traceable means, prohibiting parcel post. The contract includes unique tracking identifiers, project codes, and government-use-only codes, with performance governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. The solicitation is open under SPE4A6-26-T-10QF with a response deadline of August 7, 2026, and is sourced by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
RAIL, GUIDE
Solicitation # SPE7LX-26-U-8653
The contract solicitation SPE7LX-26-U-8653 issued by the Department of Defense’s Strategic Acq Program Directorate through DLA Land and Maritime establishes an Indefinite-Delivery Contract (IDC) for the procurement of 34 units of RAIL, GUIDE (NSN 5975-01-556-2823), with a guaranteed minimum quantity of 5 units and a maximum contract value of $350,000.00. Delivery is required within 135 days after the placement of a delivery order, with FOB Origin terms applying, meaning the contractor assumes all transportation risk and cost to a designated point within the contiguous United States. Inspection and acceptance occur at the destination, following strict quality assurance protocols that prioritize MIL-STD-1916 or ASQ H1331 for sampling, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero nonconformances are required in samples unless otherwise stipulated, and DLA’s Master List of Technical and Quality Requirements supersedes all other standards including ASTM D3951. Packaging and labeling must strictly adhere to MIL-STD-129 for all markings and barcoding, with hazardous materials packaged per TQ requirement IP025 as defined by FED-STD-313, while non-hazardous items follow commercial packaging standards under ASTM D3951 unless overridden by DLA requirements. Palletization must comply with RP001: DLA Packaging Requirements for Procurement. All shipments require compliance with the Hazard Communication Standard (29 CFR 1910.1200) and submission of hazard labels for non-exempt materials prior to award. Electronic invoicing through WAWF is mandatory, and the contractor must maintain current SAM registration. Contractual clauses enforce cybersecurity safeguards including 252.204-7012 for safeguarding covered defense information, prohibit trafficking in persons, require employment eligibility verification, and mandate compliance with sustainable product requirements. The contract includes clauses allowing for changes, unenforceability of unauthorized obligations, and accelerated payments to small business subcontractors, and requires the offeror to represent its small business status and disclose UEI and CAGE codes if providing covered defense telecommunications equipment.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-10UP
This contract specifies the procurement of electrical insulation sleeving under NSN 5970-01-432-4149, with a requirement for three units delivered FOB origin within 716 days, by July 24, 2028. All supplies must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking needed. The item is not subject to Item Unique Identification, as per DFARS 252.211-7003(c)(1)(i), and physical identification must adhere to RQ017 standards. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced via R or I numbers. The contractor must adhere to DLA packaging procedures, and delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Measuring and test equipment must meet RT001 standards, and documentation for source approval is required per RC001. Covered defense information may apply, and removal of government identification from non-accepted supplies is mandated per RQ011. The procurement is classified under NAICS 335932 and issued by the Department of Defense, ASC Commodities Division, with John Schaefer as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-10PN
The contract specifies the procurement of electrical insulation sleeving under NSN 5970-01-695-1230, with a quantity of 4 feet to be delivered within five days FOB origin. The material must comply with ASTM D3295-20 standards and is classified as non-hazardous per HMIC review, eliminating the need for a Safety Data Sheet. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required. Packaging follows DLA’s procurement requirements, using unit containers E5, no cushioning, and a pack code of U. The item is to be palletized according to DLA standards and shipped via the fastest traceable means, excluding parcel post, to the Letterkenny Army Depot in Chambersburg, PA. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and unspecified attributes treated as major. The delivery is subject to a 10% positive quantity variance. The contract is issued under solicitation SPE4A6-26-T-10PN with a response deadline of August 7, 2026, and the original required delivery date is July 28, 2026. Technical and quality requirements are governed by the DLA Master List, and the unit of issue is feet. All deliveries are to be made to the government’s designated point of receipt with inspection and acceptance occurring at destination.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
PANEL, ELECTRICAL-EL
Solicitation # SPE4A5-26-T-282E
This contract is for the procurement of one electrical panel, part number CA81662-001, identified by NSN 5975-01-593-7215, to be delivered to the USS CHUNG HOON DDG 93 at FPO AP 96662 within 20 days of award. Delivery is FOB destination with zero tolerance for quantity variance, and both inspection and acceptance occur upon arrival at the final delivery point. The item must comply with MIL-STD-2073-1E for preservation and packaging, and marking must adhere to MIL-STD-129 with no special marking required. Packaging must follow DLA’s procurement standards, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, and marking, except for specified functional uses in batteries, lighting, instruments, sensors, weapon systems, or NAVALSEA-approved chemical reagents, with additional containment requirements for portable mercury-containing devices. Sampling and quality verification must conform to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise defined, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The supplier must ensure compliance with Cybersecurity Maturity Model Certification Level 2 self-assessment and handle Covered Defense Information per applicable regulations. The contract references DLA’s Master List of Technical and Quality Requirements and mandates adherence to all referenced standards including physical identification, removal of government markings from non-accepted items, and unit of issue alignment with ANSI X12 standards. The contract is issued under solicitation SPE4A5-26-T-282E with an original required delivery date of July 6, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 335932
New
DIBBS
DISTRIBUTION BOX
Solicitation # SPE7M1-26-T-242J
The contract is for the procurement of two Distribution Boxes with NSN 6110015891812 under solicitation SPE7M1-26-T-242J, issued by the Maritime Supply Chain under the Department of Defense. The total contract value is $4.00, with a unit price of $2.00 per unit, and delivery is required within 180 days from award, with a firm delivery date of February 7, 2027. Delivery is FOB origin, meaning the contractor bears all transportation costs and risks until the goods are transferred to the carrier at the point of origin. The destination for delivery is W1A8 DLA DIST SAN JOAQUIN, 25600 S CHRISMAN ROAD, REC WHSE 57, TRACY CA 95304-5000, United States. Inspection and acceptance both occur at the destination, and the government is responsible for inspection per FAR 52.246-2. Packaging and labeling must strictly conform to MIL-STD-129, including proper barcode and data matrix markings, with the Unit of Issue and Quantity per Unit Pack exactly as specified in the contract. Palletization is governed by RP001: DLA Packaging Requirements for Procurement, and all packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence. The contractor must also comply with the Hazard Communication Standard under 29 CFR 1910.1200 for any hazardous materials, unless specifically exempted under federal statutes. All shipments must include required documentation as per DLAD PROC NOTES C19 and C20, and invoicing must be submitted electronically through WAWF using the Combo Document format. The solicitation mandates adherence to numerous FAR and DFARS clauses, including equal opportunity for workers with disabilities, combating trafficking in persons, employment eligibility verification, safeguarding contractor information systems, NIST SP 800-171 requirements for controlled unclassified information, and prohibitions on acquiring covered telecommunications equipment. Offerors must complete representations on small business status, socioeconomic eligibility, and UEI/CAGE disclosures for any joint ventures or covered items, though no selections are pre-filled. The contract permits no quantity variance, and the clause for changes applies under fixed-price terms. The primary point of contact for the contracting activity
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A7-26-T-601F
The contract pertains to the procurement of electrical insulation tape meeting specific technical and quality standards, with dimensions of 1.000 inches in width and 108 feet in length, and a thickness of 0.0015 inches in natural color. The product must comply with MIL-STD-129P for shipping and labeling, and MIL-STD-2073-1E for packaging, including special marking code 33 indicating Type II with an 18-month shelf life extendable under DLA’s RS001 requirement. All items are classified as critical application products and must adhere to the TDP Rev A Gen 1 referenced under CID A-A-59474D and MIL-STD-129R. The tape must conform to the DLA Master List of Technical and Quality Requirements, incorporating referenced R and I numbers, and is subject to zero-defect sampling per MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major. Inspection and acceptance occur at origin under RQ009 and RQ001 tailored requirements, with no variance allowed in quantity and delivery expected within five days FOB origin. The item is identified by NSN 5970-01-258-1216 with a purchase request number 7017636642, and the order quantity is exactly three rolls (RO), with no tolerance for over or under shipment. Packaging must follow DLA’s RP001 requirements, using E5 unit containers, no cushioning, and standardized marking. The contract falls under solicitation SPE4A7-26-T-601F, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, with performance located at Point Mugu NASC, CA 93042-5051. Contract details indicate a posting date of July 30, 2026, and a response deadline of August 7, 2026, with Hannah Leonard listed as the primary point of contact. The unit of issue is RO as authorized by DoD, with ANSI X12 equivalents defined via DLA’s official URL, and all technical and quality directives are current as of the solicitation date under DLA’s control provisions for simplified or large acquisitions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
INSULATING COMPOUND KI
Solicitation # SPE4A0-26-T-4125
This contract specifies the procurement of an electrical insulating compound kit designated as a commercial off-the-shelf (COTS) item with the NSN 5970-00-253-6021 and part number RTV-3120 + RTV-3010-S, supplied by DOW SILICONES CORPORATION. Each unit of issue is one pound, comprising one 1-pound can of RTV-3120 base and one 0.1-pound tube of RTV-3010-S catalyst. The kit is classified as a critical application item with a non-extendable shelf life of 12 months, and while standard requirements mandate 85 percent remaining shelf life upon receipt, this contract reduces that threshold to 50 percent. The product must comply with hazardous communication standards, requiring approved Safety Data Sheets (SDS) and OSHA hazard warning labels reviewed and approved by technical personnel prior to award, with copies submitted to the DLA Aviation HMIRS office. Packaging and labeling must adhere to MIL-STD-2073-1E and MIL-STD-129, including preservation methods, box containment for all kit components, cushioning to prevent movement, and explicit marking with contents lists, barcodes, and the special code 32 indicating Type I shelf life. Palletization follows DLA packaging requirements, and shipment must be delivered within five days FOB origin, with zero tolerance for quantity variance. Delivery is required to Hill AFB, Utah, and must be shipped by the fastest traceable means—parcel post is prohibited. Inspection and acceptance occur at destination under zero-defect sampling criteria, using MIL-STD-1916 or comparable zero-based plans, with critical attributes held to an AQL of 0.1. The contract, issued under SPE4A0-26-T-4125, has an original required delivery date of July 28, 2026, and is managed under the Department of Defense’s Aviation Supply Chain Esoc Buys office, with Thomas Anderson as the primary point of contact.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 333517
New
Federal
BED MILL PACKAGE
Solicitation # N0016426Q0283
The U.S. Navy’s Naval Surface Warfare Center Crane is seeking a sole source procurement for one TRAK DPMRX5 Bed Mill with ProtoTRAK RMX CNC Package under NAICS code 333517, issued as a firm fixed price commercial acquisition authorized under FAR 12. The contract is exclusively awarded to CHARLES JONES MACHINERY INC due to unique technical, physical, and operational requirements that only this vendor can fulfill without risking mission delays or excessive costs. The solicitation is open for quotations from 31 July 2026 through 10 August 2026 at 3:00 PM Eastern Time, with responses required to be emailed to danielle.n.richardson12.civ@us.navy.mil. All offerors must be currently registered in SAM, and while other firms may submit capability statements, the government retains full discretion to proceed without competition. Amendments to the solicitation will be posted on SAM.gov, and it is the vendor’s responsibility to monitor for updates. The point of contact for this procurement is Danielle Richardson, and performance will occur at Crane, Indiana.
Machine Tool Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333310
New
Federal
OPTICAL LAB EQUIPMENT
Solicitation # N0016426Q0282
The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting a sole source procurement for optical lab equipment, specifically PLX periscope and retroreflector systems, under solicitation number N0016426Q0282. The acquisition is designated as firm fixed price and commercial, with only PLX Inc. identified as the sole responsible source due to its proprietary rights and exclusive ownership of the required technology, which it refuses to transfer to the government. This procurement is authorized under FAR 12.102, and while other vendors may submit capability statements, the government retains full discretion to proceed without competition. The requirement falls under NAICS code 333310 and is not subject to any small business set-aside. All offerors must be currently registered in the System for Award Management (SAM) to be considered. Responses are due by 3:00 PM Eastern Time on August 10, 2026, and must be submitted electronically to Danielle Richardson at danielle.n.richardson12.civ@us.navy.mil. The solicitation was posted on July 31, 2026, and no synopsis is being published due to the sole source justification under FAR 5.202(a)(13). Interested parties are responsible for monitoring sam.gov for any amendments issued prior to the deadline; only those who submit quotes will receive updates if changes occur after the closing date. The place of performance is Crane, Indiana, and the procurement is managed by the Department of Defense.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334511
New
Federal
HYDROPHONE BAFFLE RINGS
Solicitation # N0016426Q0256
The U.S. Navy, through the Naval Surface Warfare Center Crane, is seeking Hydrophone Baffle Rings under a sole source procurement with limited competition authorized under FAR 13.106-1, targeting three previously approved vendors: Brownstown Quality Tool & Automation, LLC, Wagler Competition Products, and Stark Precision Machine. The solicitation, numbered N00164-26-Q-0256, was issued on July 31, 2026, with responses due by 2:00 PM Eastern Time on August 6, 2026, and is classified under NAICS code 334511 for semiconductor and other electronic component manufacturing. Offerors must be registered in the System for Award Management and the Joint Certification Program to access controlled documents, and all submissions must be emailed directly to Jaclyn Bailey at the designated Navy email address. While the Government retains full discretion to proceed without open competition, any responsible source may submit a capability statement, though such submissions are evaluated solely for the purpose of determining whether to initiate a competitive process. The requirement is not subject to any small business set-aside, and all updates or amendments will be published only on Contract Opportunities at sam.gov, making it the sole authoritative source for changes prior to the deadline. Any modifications issued after the closing date will be communicated exclusively to those who submitted offers.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 513210
New
Federal
Software Licenses New/Renewals
Solicitation # N0016426Q0281
The contract solicitation N0016426Q0281 seeks software license renewals and new purchases from Ansys Incorporated under a sole-source arrangement, with the Government retaining full discretion on whether to conduct a competitive procurement despite allowing other responsible sources to submit capability statements. The procurement is associated with NAICS code 513210 and falls under the Department of Defense, specifically the Naval Surface Warfare Center Crane in Indiana, with the performance location also in Crane, Indiana. Offers must be submitted via email to Joshua Tester at joshua.e.tester.civ@us.navy.mil no later than August 8, 2026, at 12:00 AM Eastern Daylight Time. All vendors must be actively registered in the System for Award Management and comply with all registration and confirmation requirements. While the solicitation is issued under FAR Part 13 procedures with a synopsis exception, interested parties are responsible for monitoring sam.gov for any amendments prior to the deadline. Post-deadline changes will only be communicated to those who have submitted quotes and may influence future discussions or award decisions.
Software Publishers

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325211
New
Federal
Noryl Rods
Solicitation # N0016426Q0268
NSWC Crane is seeking quotes for 20 NORYL RODs, each 5 inches in diameter and black with 30% glass fill, to be cut into 4-foot sections totaling 80 feet. The contract will be awarded as a firm fixed price under Simplified Acquisition Procedures, with all quotes required to include shipping FOB to Crane, Indiana 47522, along with the delivery schedule. Payment will be made electronically via PIEE/WAWF within 30 days of invoice submission. Bidders must be currently registered in the System for Award Management and comply with all solicitation requirements, as non-compliant offers will be rejected without further review. This solicitation is a Small Business Set Aside under NAICS code 325211 and is issued under a synopsis exception. All amendments or updates prior to the closing date will be posted on SAM.gov, and it is the vendor’s responsibility to monitor for changes. Offers must be submitted via email to dustin.l.spicer.civ@us.navy.mil no later than 4:00 PM Eastern Time on August 14, 2026. Post-deadline amendments will only be shared with submitted offerors for potential future discussions or award.
Plastics Material and Resin Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
Federal
SOLE SOURCE – Thermistor Connectors
Solicitation # N0016426Q0266
The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting Thermistor Connectors through a sole-source contract action under FAR 13.106-1, limiting participation to Teledyne Instruments, Inc., as the only qualified source capable of meeting the technical requirements necessary for timely and accurate testing. The decision to proceed without competition is based on Teledyne’s exclusive qualification and existing capability to produce these critical components. While other responsible sources may submit capability statements, the Government retains full discretion to determine whether a competitive procurement is warranted, and such submissions will be evaluated solely for that purpose. Participation requires mandatory registration in the System for Award Management (SAM) and the Joint Certification Program (JCP) to access controlled technical attachments. The solicitation follows FAR Part 13 procedures and is exempt from full synopsis requirements under FAR 5.202(a)(13), with the official solicitation number N00164-26-Q-0266. Interested vendors must monitor sam.gov for any pre-closing amendments, and only those who submit quotes by the deadline will receive post-deadline revisions. Offers must be electronically submitted to Sandra Gunderman at sandra.e.gunderman.civ@us.navy.mil no later than August 3, 2026, at 1:00 PM Eastern Time. The contract is not set aside for small businesses or other categories, and performance will occur at Crane, Indiana.
Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
Federal
UPS System Upgrade
Solicitation # N0016426Q0279
The U.S. Navy’s Naval Surface Warfare Center Crane is seeking to upgrade and calibrate its uninterruptible power supply (UPS) system under contract number N0016426Q0279, with a closing date of August 8, 2026, at 12:00 AM Eastern Daylight Time. The procurement is being conducted as a non-competitive action with Eaton Corporation identified as the intended sole source, although other responsible vendors may submit capability statements for consideration; the government retains sole discretion on whether to proceed with competition. All participants must be registered in the System for Award Management and the contract is designated for small businesses. The requirement falls under NAICS code 334419 and is administered by the Department of Defense. Offers must be submitted via email to Joshua Tester at joshua.e.tester.civ@us.navy.mil, and any amendments to the solicitation will be posted exclusively on sam.gov, making it the vendor’s responsibility to monitor for updates. The place of performance is Crane, Indiana, and secondary point of contact is Shauna Pegg.
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
New
Federal
Unable to Retrieve Subcontract OpportunitiesNo subcontract opportunities could be identified or decomposed from the prime contract due to system errors, rendering the solicitation non-functional for potential subcontractors. The posting, issued by the Naval Surface Warfare Center Crane under the Department of Defense, was published on July 30, 2026, with a response deadline of August 3, 2026, but lacks essential details such as a solicitation number, NAICS code, set-aside information, organizational type, or point of contact. The place of performance is listed only as city code 17516 without state or zip code, and the office address contains no usable location data. The contract type is classified as subcontract, yet no viable opportunities or requirements are available for bid, making this entry effectively inactive or placeholder in nature.

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 541330
New
Federal
Engineering Change Proposal (ECP) SupportThe contract requires support for the development, documentation, and submission of Engineering Change Proposals to address design or process deviations from drawing 5974788 Revision L, with all changes subject to government approval. This effort is critical to ensuring compliance with technical specifications and maintaining regulatory adherence through formal change control processes. The work is classified as a subcontract under a Small Business Set Aside, specifically designated for total small business participation, with the NAICS code 541330 indicating engineering services. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, and the performance location is tied to a site identified as 17516. The contracting agency is the Naval Surface Warfare Center Crane Division under the Department of Defense, and the work is expected to involve close coordination with government representatives to secure necessary approvals for proposed changes. All submissions must align with established technical baselines and procedural requirements for engineering modifications within defense systems.
Engineering Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
Federal
Certificate of Compliance and Quality DocumentationThe contract requires the preparation and submission of Certificates of Compliance for each delivered unit under CDRL A003, ensuring strict adherence to all technical specifications and quality standards. This obligation is central to the deliverables and must be fulfilled for every unit provided under the subcontract. The activity is classified as a Small Business Set Aside under the SBA, with the NAICS code 541611 indicating it pertains to management consulting services, though the nature of the work is tied to quality assurance and compliance documentation for defense-related units. The contract was posted on July 30, 2026, with a deadline for responses on August 7, 2026, and is issued by the Naval Surface Warfare Center Crane under the Department of Defense. Performance is expected to occur at a location designated by the city code 17516, with no additional geographic details provided. The solicitation is part of a broader procurement effort to ensure rigorous quality control across delivered items.
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 541320
New
Federal
Test and Inspection Services for Seal AssembliesThe contract requires qualified vendors to perform qualification and acceptance testing on seal assemblies to ensure full compliance with drawing 5974788 Revision L. Testing must be conducted according to established procedures, and all results must be documented in Test Inspection Reports designated as CDRL A002, which serve as official verification of adherence to technical specifications. The work is classified as a subcontract under a Small Business Set Aside, with the NAICS code 541320 indicating engineering services, and is being procured by the Naval Surface Warfare Center Crane Division under the Department of Defense. Proposals must be submitted by August 7, 2026, with the work expected to be performed at a location identified by the ZIP code 17516, though no specific city or state is provided. The opportunity is open only to small businesses as defined by the SBA, and all responses must demonstrate technical competency and capacity to deliver accurate, compliant documentation meeting federal contracting standards.
Landscape Architectural Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
Federal
Technical Data Package (TDP) Development and SubmissionThe contract requires the development and delivery of a complete Technical Data Package compliant with Department of Defense standards, encompassing engineering drawings, detailed specifications, test procedures, and manufacturing documentation. This package, designated as CDRL A001, must meet all applicable DoD requirements for technical data and be submitted by the agreed-upon deadline. The effort is structured as a subcontract under a Small Business Set Aside, with the NAICS code 541330 indicating it falls under engineering services, and is intended exclusively for small business concerns. The solicitation was posted on July 30, 2026, with proposals due by August 7, 2026, and the work is to be performed at a location identified by the city code 17516. The contracting agency is the Naval Surface Warfare Center Crane, operating under the Department of Defense, with no specific point of contact provided. All deliverables must align with Defense standards, and the successful offeror will be responsible for ensuring the completeness, accuracy, and formal compliance of the TDP as stipulated in the contract requirements.
Engineering Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details