Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Integration of ACM Shutter Control

Active
N0017326Q1301389668Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Research Laboratory intends to award a sole source purchase order to RIBER, INC of Hillsborough, New Jersey for the integration of an ACM shutter control, with no competitive solicitation planned due to the unique nature of the requirement that only this vendor can satisfy. The procurement will be conducted under Simplified Acquisition Procedures via Federal Acquisition Regulation Part 13.106-1(b), as the estimated value does not exceed the $250,000 threshold, and is classified under NAICS code 334413 with a Federal Supply Code of J066. The task is limited to a single line item quantity of one unit, and no other suppliers are expected to meet the agency’s specific technical needs. Interested parties may respond with evidence demonstrating that competition would benefit the government, but submissions will be evaluated solely to determine whether to pursue a competitive process; no reimbursement will be provided for any costs associated with responding. Responses must be submitted by the deadline of August 12, 2026, and all correspondence must reference the notice number N0017326Q1301389668. The place of performance is in Washington, District of Columbia, with Elizabeth Harley serving as the primary point of contact for inquiries.

General Info

Sole source purchase to RIBER, INC for ACM shutter control under $250,000, no competition planned, response deadline August 12, 2026.

Agency

Department Of Defense → Department Of The NavyView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

Washington, DC, 20375, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Department Of The Navy
Contacts1 person available
OfficeN/A
Organization / Agency
Department Of Defense → Department Of The Navy
View Agency Profile
Office AddressN/A
Contacts

Full Description

Show more

NRL NOTICE OF INTENT TO AWARD A SOLE SOURCE TEMPLATE


This Notice of Intent is not a request for competitive proposals. This is not a solicitation or request for offers. No solicitation package is available and email requests will not be honored. Only one responsible source and no other supplies or services will satisfy agency requirements.


The Naval Research Laboratory (NRL) intends to award a sole source purchase order to RIBER, INC of Hillsborough, New Jersey to furnish:



           See Attached Schedule of Supplies/Services      OR                             See Chart Below



Line Item                            Description                                                                       Quantity            


01                                        INTEGRATION of ACM SHUTTER CONTROL                   1 EA


The North American Industry Classification System Code (NAICS) for this requirement is 334413 with the size standard of  N/A The Federal Supply Code (FSC) / Product Service Code (PSC) procurement is J066.


This purchase will be made utilizing Simplified Acquisition Procedures in accordance with:


  • Federal Acquisition Regulation (FAR) Part 13.106-1(b) for purchases not exceeding the simplified acquisition threshold of $250,000.

Interested parties may identify their interests and capability to respond to this requirement in accordance with the posted opening and closing dates. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government.


Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. A determination by the Government not to compete this proposed purchase order based upon response to this notice is solely within the discretion of the Government. No reimbursement for any cost connected with providing capability information will be provided.


Please reference this Notice of Intent number, N00173Q1301389668 on your correspondence and in the “Subject” line of your email.

Similar Contracts

Same NAICS industry code

NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITAL
Solicitation # SPE7M5-26-T-368M
This contract is for the procurement of 10 units of a digital microcircuit under Federal Supply Class 5962, with the NSN 5962-01-150-7476 and part number 1509571G5, supplied by L3HARRIS TECHNOLOGIES, INC. Delivery is required within 154 days from the contract award, FOB origin, with inspection and acceptance occurring at the destination. The item must comply with stringent quality and traceability requirements, including adherence to the DLA Master List of Technical and Quality Requirements, qualification under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for semiconductor and microcircuit products, and compliance with DLA Procurement Note C03 for supply chain traceability documentation retention. All units must be marked in accordance with MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification, with specific markings applied to each unit pack. Packaging must meet MIL-STD-2073-1E and include ESD and EMI protective materials in accordance with MIL-PRF-81705, using only qualified manufacturers listed on QPL-81705. Cushioning must meet A-A-59136 standards or use form-fitting ESD containers to prevent damage to leads. Mercury and mercury compounds are prohibited except for specific exempted applications under NAVSEA guidelines. The contractor is required to submit comprehensive traceability and test documentation via the DLA Land and Maritime Form 918, which must be emailed to the designated DLA CDAP address no later than 15 days before the delivery date. The contractor may not ship the product until receiving written confirmation of documentation approval from the contract administrator. Each shipment must include a hard copy of the Form 918 and the written shipping authorization within the packaging. All digital submissions are limited to 15 megabytes per email with specific naming conventions for files and subject lines. The supplier must also maintain cybersecurity maturity model certification Level 2 self-assessment compliance and ensure that no government identification is removed from non-accepted supplies. The contract stipulates zero variance in quantity and specifies the final delivery address and shipping details as the DLA Distribution facility in Columbus, Ohio. Payment will be withheld if documentation is incomplete, inaccurate, or improperly attached, or if shipment occurs without prior approval.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
DISPLAY, OPTOELECTRO
Solicitation # SPE7M5-26-Q-0825
This contract specifies the procurement of 18 units of an optoelectronic display with NSN 5980-01-593-7305 under solicitation SPE7M5-26-Q-0825, with a delivery deadline of 200 days after award. The item is classified as a critical application item, and identical part numbers are listed for Moog Inc and Thales USA, Inc. The contract enforces strict compliance with DLA packaging requirements, including MIL-STD-2073-1E preservation methods and MIL-STD-129 marking standards, with no special marking required. Packaging must be palletized per DLA guidelines, and mercury or mercury-containing compounds are explicitly prohibited in preservation, packaging, and marking, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or specific chemical reagents authorized by NAVSEA; where permitted, such items must include a secondary containment and be shockproof per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with FOB origin terms and a zero percent quantity variance permitted. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List on the official DLA website, with the applicable revision determined by the solicitation or award date. Unit of issue is EA, and transportation logistics follow DLA Procedural Notes C19 and C20.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
STRIP, ELECTRICAL GROUN
Solicitation # SPE7M1-26-U-5023
The contract involves the procurement of electrical grounding strips identified by NSN 5999013088645, with an estimated quantity of 45 units under solicitation SPE7M1-26-U-5023, issued by the Defense Logistics Agency on behalf of the Department of Defense’s Maritime Supply Chain. This is an indefinite-delivery contract with a guaranteed minimum of six units and a maximum contract value of $350,000, structured as a total small business set-aside under FAR 19.5 with NAICS code 334413. Delivery is FOB origin with a 146-day performance period from award, and all items must be inspected and accepted at the destination. Packaging must strictly conform to MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containers, while marking adheres to MIL-STD-129 with no special marking required. Palletization follows DLA’s RP001 requirements, and hazardous materials packaging complies with IP025. The grounding strips must be free of intentional mercury or mercury-containing compounds except in permitted applications such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shockproof design and dual containment per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required for acceptance unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are deemed major. The contract includes multiple FAR and DFARS clauses addressing cybersecurity safeguards, export controls, mercury and hexavalent chromium prohibitions, subcontracting requirements, payment instructions via WAWF, and compliance with the Cargo Preference Act requiring U.S.-flag vessels for ocean transport. The contractor must also comply with the DLA Master List of Technical and Quality Requirements referenced under RA001 and remove government identification from non-accepted supplies per RQ011. Payment is processed electronically through WAWF using DoDAAC routing, and the contractor is subject to stringent reporting, safeguarding, and cybersecurity obligations under clauses including 252
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → Department Of The Navy

Same awarding agency

NAICS: 325220
SBIR / STTR
Domestic Production of Plant-based Carbon Fiber Precursors in Support of Hypersonic Applications
Solicitation # DON26BZ04-NV066
The United States Navy is seeking solutions to establish a domestic source of plant-based carbon fiber precursors for use in thermal protection systems critical to hypersonic applications. Currently, rayon-based carbon fibers—essential for their superior thermal performance over alternatives like PAN and pitch-based fibers—are not produced in the U.S. and are sourced from overseas, primarily European suppliers, creating supply chain vulnerabilities. The domestic production of rayon fibers halted in 1997 due to environmental concerns tied to the traditional viscose process, and while global trends are moving toward non-toxic cellulose-based production methods, no alternative fibers have yet been validated for use in high-performance carbon phenolic composites. This effort requires the development and characterization of a new plant-based precursor material that can be reliably carbonized into a fiber meeting the structural and thermal requirements of hypersonic systems. The successful contractor must be a U.S.-owned small business with fewer than 500 employees and must be capable of obtaining and maintaining a Secret-level security clearance and facility, as work in Phase II may involve classified information. Compliance with the National Industrial Security Program Operating Manual is mandatory, and the contractor must be able to safeguard classified material throughout the project lifecycle. This initiative is part of a broader national imperative to secure critical materials for defense and space applications and reduce dependence on foreign supply chains.
Artificial and Synthetic Fibers and Filaments Manufacturing

POSTED

about 1 month ago

DEADLINE

in 13 days
View Details
NAICS: 334290
SBIR / STTR
High Precision Specialized Waveguides for Extreme Temperatures
Solicitation # DON26BZ04-NV067
The Navy is seeking the development of high-precision specialized waveguides capable of operating under extreme hypersonic environmental conditions where surface temperatures exceed 1,000 degrees Celsius. Traditional RF cables fail to maintain signal integrity and power delivery under such thermal stress, making waveguides the preferred solution due to their superior high-power transmission capabilities. The waveguides must perform reliably across a broad spectrum of RF frequencies, specifically targeting the X, Ku, K, and Ka bands, while accommodating the challenge of minimizing size at higher frequencies. The design must allow for complex and unique geometries without degrading signal performance, and any dielectric medium used—such as air—must exhibit permittivity near that of a vacuum to ensure minimal signal loss even at sustained high thermal loads. Materials must remain stable and efficient under prolonged exposure to extreme heat without compromising transmission quality. This solicitation is a total small business set-aside under the SBIR/STTR mandate, restricted to U.S.-owned and operated entities with fewer than 500 employees, classified under NAICS code 334290. Successful bidders must be capable of obtaining and maintaining a secret-level security clearance and a classified facility, as work in Phase II may involve classified information tied to national defense. Contractor personnel must comply with the National Industrial Security Program Operating Manual, and all classified materials must be safeguarded in accordance with Title 32, Part 2004.20 of the Code of Federal Regulations. Only companies that meet stringent U.S. ownership standards and can demonstrate compliance with DCSA security protocols will be eligible, with no foreign influence permitted unless explicitly mitigated and approved. The solicitation closes on July 22, 2026, with performance expected to advance critical capabilities for hypersonic platforms operating in the most demanding thermal environments.
Other Communications Equipment Manufacturing

POSTED

about 1 month ago

DEADLINE

in 13 days
View Details
NAICS: 541330
Federal
NAWCAD Long Range Acquisition Forecast (LRAF) – FY26
Solicitation # NAWCAD-LRAF-FY26-PAX
The Naval Air Warfare Center Aircraft Division (NAWCAD) Patuxent River is issuing a Long Range Acquisition Forecast (LRAF) for fiscal year 2026 to outline anticipated procurement needs across multiple defense programs. This forecast covers a broad spectrum of technical support services including systems engineering, software development, integration, test and evaluation, logistics, and mission systems support for air, ship, and shore platforms. The acquisition strategy primarily involves indefinite-delivery/indefinite-quantity (IDIQ) contracts under the SeaPort and SA IDIQ vehicles, with estimated total values ranging from $10 million to $1 billion across individual contracts. The forecast includes projected timelines for solicitation releases between FY26 Q3 and FY28 Q1, with awards expected to be made starting in FY27 Q1 and performance extending over five-year periods. The place of performance is primarily centered in St. James, Maryland, with additional sites including Patuxent River, Maryland, and Orange Park, Florida, and specific testing activities occurring at San Clemente Island, California. The procurement actions are designated as either Small Business Set Aside or unrestricted, with several contracts clearly identified as set aside for small businesses, triggering associated reporting obligations under FAR Part 19.5. Personnel supporting certain programs, particularly those related to PMA-209 and other classified systems, are required to hold Top Secret/Sensitive Compartmented Information clearances, and some contracts call for embedded Lead Systems Integrator teams with specialized expertise in cybersecurity and mission systems. While the forecast references funding through various Treasury Account Symbols and Accounting Classification Reference Numbers, no explicit payment office, invoicing method, packaging, inspection, or delivery terms are outlined. No formal contract clauses, evaluation factors, or instructions for proposal submission are provided in this notice, which is strictly informational and not binding. The point of contact for inquiries is Alfred W Hensler, and updates to the forecast will be posted quarterly via the same notice on SAM.gov.
Engineering Services

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 541519
Federal
Notice to Industry - Application of Cybersecurity Maturity Model Certification (CMMC) Requirements
Solicitation # N62473CMMCNotice
NAVFAC Southwest is issuing an important notice to current and potential contractors regarding the implementation of the Cybersecurity Maturity Model Certification (CMMC) requirements applicable to all NAVFAC Southwest Planning, Design, and Construction Multiple Award Construction Contracts (MACCs) and Architect-Engineer IDIQ Contracts. Effective future contract actions will include CMMC requirements as guided by the Department of War's ongoing CMMC program rollout. Contracts and solicitations will specify when contractor information systems must handle Federal Contract Information (FCI) or Controlled Unclassified Information (CUI), and will identify the required CMMC level. Contractors must have an up-to-date CMMC status recorded in the Supplier Performance Risk System (SPRS), including relevant assessments and affirmations, as a prerequisite for award of contracts, task orders, or options where CMMC applies. Beginning November 10, 2026, contractors seeking NAVFAC SW IDIQ awards must demonstrate at least a CMMC Level 2 certification validated by an accredited C3PAO. While some task orders might require a lower CMMC level, the majority of construction and architect-engineering work under NAVFAC SW contracts will necessitate this Level 2 certification or higher. To avoid disruptions in contract eligibility, contractors and subcontractors are urged to promptly access SPRS via PIEE, ensure their CMMC status is posted and accurate, and familiarize themselves with available resources and tutorials to support the certification process. This notice is informational and does not serve as a solicitation or guarantee of contract award. Points of contact are available for assistance.
Other Computer Related Services

POSTED

4 months ago

DEADLINE

N/A
View Details