Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Interchangeable Payload Module Development

Active

Federal

Response Deadline10/30/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract focuses on the development of interchangeable lethal and non-lethal payload modules for prime contractors supporting Army Contracting Command-Rock Island at Picatinny projects. The scope of work involves engineering modular payload inserts and electronic fuzing interfaces specifically designed for operation in GPS-denied environments, utilizing energetic materials and modular cargo housing. The project requires strict adherence to Energetic Material Qualification standards as specified in the statement of work. The successful contractor will be responsible for delivering fully functional payload modules along with comprehensive qualification reports. This opportunity is categorized under NAICS code 336413 and is managed by the Department of Defense.

General Info

Subcontract for developing lethal and non-lethal payload modules for GPS-denied Army projects.

Agency

Department Of Defense → W6QK Acc-Ri-PicatinnyView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

NJ

Set-Aside

NONE

Documents

This scope was carved out of W15QKN26R1C5R.

The full solicitation package (16 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

155mm Modular Artillery for Combat Effectiveness (MACE)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 1

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 07:00:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Ri-Picatinny

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Ri-Picatinny

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develops interchangeable lethal and non-lethal payload modules for prime contractors on Army Contracting Command-Rock Island at Picatinny projects. Engineers modular payload inserts and electronic fuzing interfaces for operation in GPS-denied environments using energetic materials and modular cargo housing. Requires Energetic Material Qualification per SOW 6.228. Delivers functional payload modules and qualification reports.

Similar Contracts

Same NAICS industry code

16--NRP,BOTTLE FE - 36, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB30

This contract, identified by NSN 7R-1680-016098991-P8, is for the procurement of 27 units of a flight critical item with delivery terms set as FOB Origin. Due to the critical nature of the item and the limitations of available technical data, the government requires source approval prior to the contract award. Only previously approved sources have been solicited, although new sources may apply by submitting the required documentation detailed in the NAVSUP Weapon Systems Support Source Approval Information Brochures. The government intends to negotiate with a single source under FAR 6.302-1, though it will consider proposals from other responsible sources within 45 days of publication. This is a pre-solicitation notice for supplies or services where FAR Part 12 policies for commercial items are not being utilized. Interested parties must meet all qualification requirements at the time of award, and the procurement is subject to the Buy American Act and various Free Trade Agreements.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Supply of Aerospace-Grade Raw Materials for Yoke Assembly

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Manufacturing of Yoke Assembly, Cargo Ramp Lock

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Supply of Flexible Couplings (NSN 1660-00-560-4009)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Supply of Boot Assy, Auxiliary (NSN 1650-01-132-0794)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Manufacturing of Bypass Indicators (Source Controlled/CSI)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Assembly and Final Inspection of Bomb Ejector Rack Breeches

LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supply of Linear Actuating Cylinder Heads

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Aircraft Stiffener Rib Supplier (NSN 1560-01-648-0809)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

HEAD, LINEAR ACTUATING

Solicitation # SPE4A7-26-T-697N

Solicitation SPE4A7-26-T-697N is a fixed-price request for the procurement of seven linear actuating cylinder heads, identified by NSN 1650-01-110-0251 and TransDigm Inc part number 02-1411. Issued by DLA Aviation, the requirement is categorized under NAICS 336413. The required delivery date is May 18, 2027, with a delivery period of 256 days. Shipping is FOB Origin, and the items are to be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and inspection standards, with both inspection and acceptance occurring at the origin. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. Sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Key regulatory requirements include compliance with the Buy American Act and the Berry Amendment, as well as DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Additionally, the government prohibits the use of additive manufacturing for these parts unless specifically authorized.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

CLUTCH SHOE, SET

Solicitation # SPE8E7-26-Q-0315

Solicitation SPE8E7-26-Q-0315 is a simplified acquisition request issued by DLA Troop Support for the procurement of 70 sets of clutch shoes, identified by NSN 4140-01-548-8631. The requirement specifies that each set must contain two clutch shoes rather than one. Eligible part numbers include Hamilton Sundstrand Corporation P/N 1002525-1 and Kihomac Inc P/N 767121-9K. This is a firm fixed price contract with a delivery requirement of 60 days after order, and a need ship date of August 10, 2027. The contract mandates strict adherence to DLA packaging and marking standards, specifically ASTM D3951, MIL-STD-129, and RP001 for palletization, with DLA technical requirements taking precedence over ASTM standards. Inspection and acceptance will occur at the destination, with supplies delivered to DLA Distribution Depot Hill at Hill AFB, Utah. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, Buy American preferences, and the prohibition of certain foreign telecommunications equipment. Quotations must be submitted via the DIBBS portal by September 20, 2026.

POSTED

about 24 hours ago

DEADLINE

FILTER ELEMENT, FLUI

Solicitation # SPE4A7-26-T-429Q

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Ri-Picatinny

Same awarding agency

Janitorial Supplies and Consumables Provider

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

Floor Maintenance and Restoration

Janitorial Services

POSTED

DEADLINE

Facility Custodial Services (General Cleaning)

Janitorial Services

POSTED

DEADLINE

Shank 2.0 payload, training warhead, and pre-packed anti-personnel warhead

Solicitation # W15QKN-26-X-1CFG

The U.S. Army Contracting Command-Rock Island at Picatinny, acting for the Office of the Project Manager, Close Combat Systems, is conducting market research through a sources sought notice for solicitation W15QKN-26-X-1CFG. The government aims to identify capable sources to produce the Shank 2.0 payload, training warheads, and pre-packed anti-personnel warheads designed for use on small Unmanned Aerial System platforms. Additionally, the agency is seeking industry feedback to improve the Technical Data Package for better producibility. This opportunity falls under NAICS code 332992 and is managed by the Department of Defense with performance located at Picatinny Arsenal, New Jersey. There is currently no set-aside specified for this requirement. Interested parties must submit their responses by the deadline of October 1, 2026. Primary coordination for this effort is handled by Yolie M. Davila and Michael W. Arena.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

Custodial Services in Kingwood, WV (WV022)

Solicitation # W15QKN26QA088

The U.S. Army Contracting Command – New Jersey is conducting market research through a sources sought notice for custodial services at the Preston County USARC facility in Kingwood, West Virginia, under contract number W15QKN26QA088. The requirement is for comprehensive janitorial and housekeeping services across multiple facility areas including halls, restrooms, offices, drill halls, and auditoriums, with performance governed by a draft Performance Work Statement and floor plan. The contract is anticipated to be awarded as a firm-fixed-price vehicle with a base year and four optional one-year periods, totaling up to five years of potential performance. The North American Industry Classification System code is 561720 for Janitorial Services, with a small business size standard of $22 million in annual receipts, and businesses of all sizes are encouraged to respond. Responses must be submitted via email as a no more than ten-page capabilities statement in Times New Roman, 10-point font, with a deadline of 10:00 AM EST on May 7, 2026. The government will use submissions to determine whether the requirement will be set aside for small businesses or competed openly, and all respondents must clearly state their small or large business status along with any applicable socioeconomic certifications including Small Disadvantaged, Women-Owned, HUBZone, or Service-Disabled Veteran-Owned Small Business status. If awarded as a small business set-aside, the prime contractor must perform at least 50% of the work by cost. All personnel must comply with security protocols including AT Level I training, personal identity verification under FAR 52.204-9, and must be proficient in English. A fully qualified onsite representative must be present during duty hours, and all employees must be identified and reported to the Contracting Officer’s Representative within 15 days of performance start. Invoicing will be conducted monthly via WAWF and contingent upon submission of a signed Custodial Inspection Checklist verifying compliance. The contract requires adherence to TM 5-609, AR 420-1, and OSHA HazCom standards, with performance evaluated using a Quality Assurance Surveillance Plan that mandates 98–100% compliance with cleaning standards and limits customer complaints to one per month for most tasks. No funding is provided for response preparation, and the government has no obligation to award a contract based on this notice. All responses are voluntary, non-binding, and treated as proprietary information protected from

Janitorial Services

POSTED

DEADLINE

155mm Artillery Cannister Assembly

Solicitation # W15QKN-26-X-1CJZ

The Army Contracting Command-Rock Island at Picatinny, acting for the Office of the Project Manager for Combat Ammunition Systems, is conducting a market survey under solicitation W15QKN-26-X-1CJZ to identify potential sources within the National Technology Industrial Base capable of manufacturing 155mm Artillery Cannister Assemblies. This is an informational effort for planning purposes and not a Request for Proposal. The assembly consists of four specific components: a 4140 steel payload canister, a 7075 T6 aluminum payload cover, and two clocking keys made from AISI S2 or S7 tool steel. The government is seeking sources that can scale production to at least 450 units per year by October 2027, 1,000 units per year by March 2028, and 10,000 units per year by January 2031. Interested sources must be registered in the System for Award Management and provide detailed capabilities statements, including manufacturing experience with artillery metal parts, facility descriptions, quality management certifications, and projected production capacities. Access to the Technical Data Package is restricted to Department of War and authorized contractors, requiring the submission of a signed DD Form 2345, AMSTA-AR Form 1350, and a Non-Disclosure Agreement. All provided technical data is subject to strict distribution controls, export laws, and prohibitions against reverse engineering. Inquiries regarding this requirement must be directed via email to the primary point of contact, Cameron Sacco, or secondary contact, Christopher Brown.

Ammunition (except Small Arms) Manufacturing

POSTED

DEADLINE

Ordnance-Grade Metal Supply for 155mm Cannisters

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

155mm Artillery Cannister Metal Parts Manufacturing

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

CSS 99154 Upgrade Existing Lighting to LED

Solicitation # W15QKN26RA053

Solicitation W15QKN-26-R-A053 is a firm-fixed-price construction project for the Department of Defense, specifically the Army Contracting Command-New Jersey, to upgrade existing lighting systems to energy-efficient LED fixtures at the CPT John E Smathers Memorial USARC in Fort Meade, Maryland. The scope of work covers four specific facilities: Training Building 2118, Storage Building 2119, Organizational Maintenance Shop 2121, and Unheated Storage Building 2122. This project is a 100 percent small business set-aside under NAICS code 238210. The contractor is responsible for providing all labor, materials, and expertise to install LED fixtures, lamps, and drivers in accordance with detailed technical specifications and the provided Statement of Work. The government will award the contract using the lowest price technically acceptable methodology, where technical acceptability is determined by a review of the contractor cost breakdown in Attachment 0008. Proposals must be submitted via the PIEE Solicitation Module, and the current proposal due date has been extended to September 15, 2026, at 10:00 am EDT. Key requirements include compliance with Davis-Bacon Act wage determinations for Anne Arundel County, the provision of performance and payment bonds for awards exceeding 150,000 dollars, and adherence to strict quality control and safety programs. Liquidated damages for construction delays are set at 200 dollars per calendar day.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

CSS 99142 Flooring and Wall Upgrade

Solicitation # W15QKN26RA054

Solicitation W15QKN-26-R-A054 is a request for proposals for Project CSS 99142, Flooring and Wall Upgrade, located at Newark AFRC Buildings 1 and 2 in Newark, Delaware. The scope of work includes the replacement of existing flooring, painting of walls and door trim, window recaulking, and the installation of protective window film and shades. This procurement is a 100 percent set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 236220. The government will award the contract using the lowest price technically acceptable methodology, where technical merit is rated as either acceptable or unacceptable without trade-offs for price. Proposals must be submitted via the Procurement Integrated Enterprise Environment solicitation module, with a final extended due date of September 16, 2026, at 10:00 am EDT. A critical requirement for compliance is the submission of Attachment 0005, the Contractor Cost Breakdown, in Microsoft Excel format with all formulas intact. The contract is subject to Davis-Bacon Act wage determinations and requires performance and payment bonds for proposed prices exceeding 150,000 dollars. Award is subject to the availability of funds, and the selected contractor must provide a designated construction superintendent and a current certificate of insurance before commencing work.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Glock weapons systems, spare parts and accessories

Solicitation # W15QKN-26-R-A071

Solicitation W15QKN-26-R-A071 is a sole-source, five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract issued by the U.S. Army Contracting Command at Picatinny Arsenal to Glock, Inc. The effort aims to procure commercially available Glock firearms, including models G17, G19, G19X, G26, G43X, G17T, and G19T, along with magazines, spare parts, holsters, tools, and training to support the Department of the Army, other government agencies, and foreign military sales. The contract utilizes firm-fixed-price delivery orders with a ceiling amount of 40,515,357.20 dollars and a minimum guarantee of 7,400 dollars. All training, including the MOS/I Operator and Combined Armorers courses, must be conducted within the continental United States. The contractor is required to maintain a quality management system compliant with ISO 9001:2015 and adhere to strict packaging and marking standards, including MIL-STD-129 and MIL-STD-130 for item unique identification. Deliverables are managed through the Wide Area WorkFlow system, and the contractor must comply with the Small Arms/Light Weapons Serialization Program for tracking serialized receivers. Inspection and acceptance of supplies generally occur at the contractor's facility, while services and reports are accepted at the destination. The procurement specifically excludes alternative OEM products, requiring all items to be sourced directly from Glock, Inc.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Repair Fence and Expand MEP Lot, PFC Roy M. Reynolds USARC, Parkersburg, WV

Solicitation # W15QKN26QA182

This solicitation is for a 100% small business set-aside, firm-fixed-price contract to provide commercial construction services for the repair of a perimeter fence and the expansion of the Military Equipment Parking lot at the PFC Roy M. Reynolds USARC in Parkersburg, West Virginia. The scope of work includes site excavation, 3-lift bituminous asphalt paving over 4,150 square feet, the installation of new black vinyl-coated steel posts and wire ties, and the integration of a grounding system. The project must be completed within 120 calendar days from the receipt of a written Notice to Proceed, with work hours restricted to Monday through Friday, 07:30 AM to 16:00 PM. Proposals are due by 12:00 PM EST on September 15, 2026, and must be submitted via email in two volumes: a technical proposal limited to 10 pages and a detailed price proposal including a specific cost breakdown form. Award will be based on the Lowest Price Technically Acceptable (LPTA) methodology, requiring the offeror to be technically acceptable and compliant with Davis-Bacon wage determinations and small business subcontracting limitations. Key security and financial requirements include a bid guarantee of 20% of the proposed price, as well as performance and payment bonds equal to 100% of the contract price submitted within ten days of award.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS