Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Interior Door Locking Devices for Headquarters, U.S. Marine Corps.

Active
M0026412T0004Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Marine Corps Regional Contracting Office at Quantico, VA, plans to award a sole source contract to AA Locksmith Service Company located in Arlington, VA, for the procurement of interior door locking devices. The contract will provide 200 lever and rose assemblies and key cores specifically bitted to the Headquarters, U.S. Marine Corps Master Key system. Due to stringent security requirements and the unique registration of the existing Master Key system with AA Locksmith Service Company, which uses Yale-manufactured equipment on a nationally recognized register, only this company is authorized and capable of producing the required locking devices. The procurement falls under the NAICS code 561622 and will be conducted following FAR Part 13 Simplified Acquisition Procedures and FAR 6.302-1, which allows for other than full and open competition. Although this notice indicates a sole source intention, firms that believe they can meet the requirements may submit a capability statement for consideration, though the government reserves the right to decide whether to compete the contract based on those submissions. Responses must be sent electronically to the Contracting Officer by 2:00 pm Eastern Time on October 31, 2011. Late submissions will not be accepted. This procurement ensures the security and integrity of the HQMC’s locking infrastructure by limiting production to the authorized locksmith company well-versed in the specific Master Key system.

General Info

Sole source contract to AA Locksmith for 200 secure door locks keyed to HQMC Master Key system.

Agency

Department Of Defense → Commander

NAICS

561622 - Locksmiths

Place of Performance

VA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Commander
ContactsNo contacts available
OfficeQUANTICO, VA, 22134, USA
Organization / AgencyDepartment Of Defense → Commander
Office AddressQUANTICO, VA, 22134, USA
ContactsNo contact information available

Full Description

Show more
This is a notice of intent to sole source a procurement under FAR Part 13 Simplified Acquisition Procedures and FAR 6.302-1 Other Than Full and Open Competition – one responsible source. The applicable NAICS Code is 561622. The USMC Regional Contracting Office – National Capital Region (RCO-NCR) at Quantico Marine Corps Base, VA intends to award a sole source contract to AA Locksmith Service Company of 3103 10th Street North, Arlington, VA 22201-2191 for interior door locking devices comprised of 200 lever and rose assemblies and key cores bitted to the Headquarters, U.S. Marine Corps (HQMC) Master Key system. Due to security requirements, only AA Locksmith Service Company can provide the items. The HQMC Facilities Office has an existing Master Key system registered with AA Locksmith Service Company using equipment manufactured by Yale. The registration is on a national register recognized by all major lock companies and vendors. Only AA Locksmith Service Company is authorized to produce the bitted equipment. This notice of intent is not a request for competitive quotes; however a firm that believes it can meet the requirement shall provide a capability statement to the Contracting Officer. Capability statements, if received timely, will be considered; however, a determination by the Government not to compete the requirement based upon responses to this notice is solely within the discretion of the Government. Responses shall be emailed to Mr. John Martin, Contracting Officer, at contact@example.gov. Closing date for responses is no later than 2:00 pm Eastern Time, 31 October 2011. Late responses will not be considered.

Similar Contracts

Same NAICS industry code

NAICS: 561622
New
SLED
Electronic Jail Key System
Solicitation # 26-23
The Rockdale County Board of Commissioners is soliciting proposals under RFP No. 26-23 for the provision, installation, configuration, and implementation of a modern electronic key tracking and management system for the Rockdale County jail facility. The project aims to replace existing manual processes with a secure, network-connected solution featuring three electronic key management panels to enhance accountability, security, and monitoring of facility keys. The selected vendor must provide the hardware, installation, user and administrator documentation, and comprehensive training. Final acceptance is contingent upon the contractor demonstrating that the system is fully operational through rigorous testing of key access controls, transaction records, network connectivity, and reporting capabilities. The contract will be awarded based on best value, utilizing a trade-off between price, technical capabilities, and past performance. Evaluation weights are split between cost and overall value at 50%, experience and past performance at 25%, and technical approach and capabilities. Local Rockdale County vendors may receive an additional 5 points in scoring. Proposals must be submitted via USB flash drive in PDF format by December 3, 2026. Required documentation includes a proposal form, non-collusion and E-Verify affidavits, proof of business license, at least three professional references, and a detailed warranty statement. The successful contractor must also provide certificates of insurance from companies authorized to do business in Georgia and adhere to all safety and protection protocols during installation.
Rockdale County Board of Commissioners

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 561622
New
Federal
Locksmith ServicesThis subcontract for Locksmith Services supports the Southwest Regional Maintenance Center under the Department of Defense. The selected provider will perform locksmithing and secure hardware installation for prime contractors working on Navy submarine projects, with a primary focus on installing and repairing locks to ensure functional and secure access points. The opportunity is designated as a Total Small Business Set Aside under NAICS code 561622. Performance will take place in the 92136 zip code area. The solicitation was posted on October 28, 2026, with a response deadline of November 13, 2026.
Southwest Regional Maintenance Center

POSTED

about 20 hours ago

DEADLINE

in 16 days
View Details
NAICS: 561622
New
SLED
IFB-27045 Door Hardware Replacement at Various Schools-Pkg. 4 (Hayes Blgd. #102, Dunbar MS, Franklin Bldg. #239, Dunbar HS, Digital Harbor HS)
Solicitation # IFB-27045
Baltimore City Public Schools is soliciting bids under IFB-27045 for the Security Hardware Initiative Package 4, which involves door and hardware upgrades at five locations: Thomas G. Hayes Building #102, Paul Laurence Dunbar Middle School #133, Benjamin Franklin Building #239, Paul Laurence Dunbar High School #414, and Digital Harbor High School #416. The scope of work includes replacing doors and hardware to ensure interior locking capabilities and visual status indicators, utilizing hollow metal doors and frames that meet ADA and fire rating standards. All work must be completed within 365 days of the purchase order issuance. Bidders must be prequalified by the Baltimore City Department of Public Works and are required to attend mandatory pre-bid meetings and site walk-throughs. The contract will be awarded to the lowest responsive and responsible bidder based on competency, performance capability, and past performance. Submissions must be made in PDF format via the eMaryland Marketplace Advantage portal by November 16, 2026, at 1:00 p.m. local time, consisting of a technical proposal and an MBE/WBE commitment utilization document, with procurement goals set at 15 percent for MBE and 7 percent for women-owned MBE. Awarded contractors must provide payment and performance bonds within ten working days and adhere to Maryland State and Federal prevailing wage and Living Wage requirements. Additionally, contractors must comply with OSHA safety regulations, utilize USA-made materials whenever possible, and maintain strict confidentiality regarding student records. Due to the nature of the facilities, contractors must be aware of existing asbestos-containing materials management plans at several of the school sites.
Baltimore City Public Schools

POSTED

1 day ago

DEADLINE

in 18 days
View Details
NAICS: 561622
New
SLED
MPA 331 FY 27 OE LOCKSMITH SERVICES
Solicitation # OEV27007081
Solicitation OEV27007081 is an Open Enrollment Master Price Agreement issued by the State of Rhode Island to secure comprehensive locksmith services for all state agencies, facilities, and educational buildings. The scope of work includes the installation, repair, maintenance, and troubleshooting of various locking systems, keys, and associated hardware. Contractors must provide services on an as-needed basis and maintain a 24-hour emergency response capability, with an expected two-hour onsite response time for emergencies and a one-hour phone response for service calls. All workmanship and parts are subject to a 12-month warranty, and contractors must utilize state-mandated time-in/time-out logs for billing verification. Proposals are evaluated on a pass/fail basis, requiring a valid Rhode Island Contractor Registration, a detailed description of locksmith experience, and three professional references. Awarded vendors must comply with RIGL 37-13-1 prevailing wage requirements, maintain accurate certified weekly payroll records, and ensure employees possess OSHA 10-hour construction safety certification for projects exceeding 100,000 dollars. The pricing structure is based on service call fees, hourly labor rates for normal and after-hours work, and a percentage discount on locking devices. Applicants must submit a Vendor Assessment Form, Pricing Schedule, MBE Participation Acknowledgement, Prevailing Wage Addendum, and a Supplemental Bidder Attestation regarding conflicts of interest.
State of Rhode Island

POSTED

7 days ago

DEADLINE

in almost 3 years
View Details
NAICS: 561622
New
SLED
Commercial Locksmithing and Hardware InstallationThis subcontract for Commercial Locksmithing and Hardware Installation involves providing specialized services for prime contractors on Department of Aviation projects located in Philadelphia. The scope of work includes the installation, repair, and maintenance of commercial locks, deadbolts, and exit devices, as well as cylinder rekeying and key duplication using commercial machinery and non-destructive entry tools. The primary objective is the delivery of fully functional locks and installed door hardware. The opportunity is categorized under NAICS code 561622 and requires the contractor to maintain both General Liability and Workers Compensation insurance. Interested parties must submit their responses by the deadline of November 4, 2026, at 3:00 PM.
Department of Aviation

POSTED

7 days ago

DEADLINE

in 6 days
View Details
NAICS: 561622
New
SLED
FOLGER LOCK AND KEY
Solicitation # B2728290
The Folger Lock and Key solicitation, issued by the Pennsylvania Department of Aviation for the City of Philadelphia, seeks a responsible and responsive seller to provide specific items on a micro-purchase basis. The contract will be awarded to the lowest bidder who meets all responsiveness and responsibility criteria. Key requirements for a valid submission include providing unit costs for all items, answering all mandatory questions, accepting the bid terms and conditions, and having a signed Consent and Authorization form on file. The contract term is 365 days from the effective date, with a total purchase order value limit of 45,000 dollars, which may be adjusted annually based on the CPI-U. Performance requires all products to be delivered FOB Destination Point, with the City of Philadelphia serving as the final authority for inspection and acceptance. Sellers must maintain specific insurance coverages, including general liability of 500,000 dollars per occurrence and automobile liability of 300,000 dollars, unless providing supplies solely via common carrier. Additionally, successful sellers must comply with City of Philadelphia tax obligations and certify that they are not indebted to the City. All quotes must be submitted electronically through the PHLContracts portal by the specified deadline of November 4, 2026.
Department of Aviation

POSTED

7 days ago

DEADLINE

in 6 days
View Details
NAICS: 561622
New
Federal
Certified Locksmith and Key Management SpecialistThis subcontract for the US Embassy Brussels involves the provision of certified locksmith and key management services to support prime contractors on facility projects. The selected specialist is responsible for supplying and managing keys, cylinders, and physical locking system extensions, which includes producing hardware upon written authorization and ensuring secure handovers. To maintain strict security protocols, the contractor must destroy defective keys in the presence of embassy staff and maintain detailed key plans and logs. Eligible providers must possess valid Belgian locksmith licenses and successfully pass US Embassy security screening. The scope of work focuses on the delivery of authorized keys and the continuous updating of key logs to ensure the integrity of the facility's locking systems. This opportunity is categorized under NAICS code 561622 and is performed on-site in Brussels, Belgium.
US Embassy Brussels

POSTED

7 days ago

DEADLINE

in 2 days
View Details
NAICS: 561622
SLED
8844-M6 Door Hardware Replacement - Phase IIIB / WPS
Solicitation # BD-23-1172-PUR00-PUR01-134409
Solicitation BD-23-1172-PUR00-PUR01-134409 is an open market request from the City of Worcester Purchasing Department for Door and Lock Hardware Replacement - Phase IIIB. This project falls under specialized trade construction and maintenance services, specifically adhering to DCAMM standards for general building construction, doors, and windows. The work is to be performed within Worcester, Massachusetts. The solicitation was posted on October 21, 2026, with a response deadline of November 4, 2026, at 3:00 PM. Stephen McDonald serves as the primary purchaser for the project. Administrative and billing inquiries are directed to Chris Gagliastro at 455 Main Street, Room 201, Worcester, MA 01608, or via the purchasing department email and phone line. While the scope is defined as a single unit of service, the specific contract value and unit pricing are not disclosed in the provided documentation.
PUR001 - Purchasing Department

POSTED

8 days ago

DEADLINE

in 6 days
View Details
NAICS: 561622
SLED
Locksmith Services
Solicitation # RFB 27-15R
The City of Oxnard in California is seeking proposals for Locksmith Services under solicitation number RFB 27-15R. This local government opportunity requires qualified vendors to provide professional locksmithing support within the city of Oxnard. Interested parties must submit their responses by the deadline of November 2, 2026, at 2:00 PM PT. Detailed bid documents and registration requirements are available through the PlanetBids portal, and vendors are responsible for monitoring the site for any official addenda.
City of Oxnard

POSTED

10 days ago

DEADLINE

in 5 days
View Details
NAICS: 561622
SLED
Vehicle Locksmith Services
Solicitation # RFQ-27-FSD-0451-2
The City of Phoenix Public Works Department, Fleet Service Division, is soliciting offers under RFQ-27-FSD-0451-2 for vehicle locksmith services to support a fleet of over 8,000 light, medium, and heavy-duty units. The contract is for an initial term of three years beginning December 1, 2026, with two optional one-year extensions at the City's discretion. The selected contractor will provide labor, tools, and equipment for services including vehicle lockouts, key duplication, ignition switch and tumbler replacement, and the reprogramming of OEM and aftermarket electronic security systems. Performance will take place at 2441 S. 22nd Ave and other locations within the Phoenix Metropolitan area. The contractor must respond to service call requests within two business hours during standard operating hours (Monday through Friday, 6am to 5pm). Pricing is firm and fixed for the first year, with subsequent annual adjustments requiring 60 days' written notice and approval from the Chief Procurement Officer. Labor is billed at a flat hourly rate in 0.10-hour increments, and reprogramming fees must be included in the labor rate. Award will be based on the most responsive and responsible offeror, with evaluation factors including technical capability, manpower and equipment availability, safety records, and a mandatory data privacy risk screening. The City maintains strict quality standards, requiring all work to meet OEM or industry specifications and prohibiting spliced wiring connections. The City serves as the sole determiner of acceptability and will inspect all work prior to payment. Invoices must be accompanied by signed delivery or service tickets, and neither advance nor partial payments are authorized. Additionally, contractors must comply with Title VI nondiscrimination acts and maintain a written heat safety plan in English and Spanish for employees working in outdoor environments.
Public Works

POSTED

13 days ago

DEADLINE

in 13 days
View Details
NAICS: 561622
SLED
Package Management Locker Hardware SupplierThis subcontract agreement appoints a hardware supplier to manufacture and deliver 11 industrial-grade package management locker units for Texas A&M University mail services projects. The selected supplier is responsible for providing units equipped with integrated electronic locking mechanisms and ensuring all hardware is delivered to the College Station, Texas campus in accordance with university delivery and acceptance standards. The procurement process is managed by Texas A&M University under NAICS code 561622. Interested parties must submit their responses by the deadline of November 6, 2026, to be considered for the provision of these physical locker units.
Texas A&M University

POSTED

13 days ago

DEADLINE

in 9 days
View Details
NAICS: 561622
SLED
Mechanical and Electronic Door Locking Systems, Doors and Related Products
Solicitation # HCESC-26-07
The Hunterdon County Educational Services Commission (HCESC) is soliciting bids under solicitation number HCESC-26-07 for the provision of mechanical and electronic door locking systems, doors, related products, and fire door inspections. This cooperative purchasing contract is designed to serve over 950 municipal governments, educational institutions, and quasi-governmental organizations across all counties in New Jersey. The contract allows for a single or multiple awards to the lowest responsible and responsive bidders, with a potential renewal term of up to two one-year periods or one additional two-year period. To be considered responsive, vendors must provide pricing for at least 90 percent of the 105 listed items and possess the capability to service the entire state of New Jersey. Key technical requirements include strict adherence to NFPA 80 Fire Door Inspection standards, the New Jersey State Uniform Construction Code, and the State of New Jersey Uniform Fire Code. Bidders must provide proof of certification from the Door and Hardware Institute or the ALOA Security Professionals Association. Compliance with the New Jersey Prevailing Wage Act, the Americans with Disabilities Act, and the New Jersey Worker and Community Right to Know Act is mandatory. Emergency response times are strictly defined as four hours during weekdays and six hours on weekends and holidays, while non-emergency work must commence within five business days of a notice to proceed. Submissions must be made electronically via the HCESC OpenGov Portal by November 17, 2026. Required documentation includes a signed Proposal Sheet, Prequalification Affidavit, Equipment Certification, and EEO/Affirmative Action compliance notices. Payment terms are generally between 30 to 60 days following the delivery of goods or completion of services, contingent upon the submission of a signed voucher, packing slips, and detailed invoices featuring the system identifier 34HUNCCP. All work must be authorized by an approved purchase order from a Co-op member, and contractors must maintain insurance naming Hunterdon County ESC as an additional insured.
Procurement

POSTED

16 days ago

DEADLINE

in 19 days
View Details

More opportunities from Department Of Defense → Commander

Same awarding agency

NAICS: 541519
New
Federal
Certified Data Sanitization and Media DisposalThis subcontract for Certified Data Sanitization and Media Disposal supports prime contractors on PAE MC projects for the Department of Defense. The selected provider will be responsible for the verified sanitization of SSDs and SD cards using industrial wiping or degaussing equipment, ensuring all processes strictly adhere to NIST 800-88 standards. Additionally, the contractor will manage the physical disposition of retired assets and provide formal sanitization verification reports upon completion. The work is to be performed in Quantico, Virginia, under NAICS code 541519. Interested parties must submit their responses by the deadline of December 4, 2026.
Other Computer Related Services

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541512
New
Federal
Tactical Camera Kit Integration and StagingThe Tactical Camera Kit Integration and Staging subcontract involves providing custom kitting, staging, and integration services for prime contractors on PAE MC projects. The scope of work includes assembling multi-component systems, integrating Government Furnished Equipment laptops, and packing the final systems into government-specified transit cases or foam-cut Pelican cases to deliver fully integrated camera kits. This Department of Defense project is performed in Quantico, Virginia, under NAICS code 541512. A critical requirement for participation is CMMC certification. The response deadline for this opportunity is December 4, 2026.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 443130
New
Federal
Canon RF Compatible Camera Systems SupplierThis subcontract opportunity is for a supplier to provide high-end camera systems to prime contractors supporting PAE MC projects for the Department of Defense. The scope of work involves the sourcing and delivery of camera bodies and lenses that ensure native, non-adapted, or manufacturer-certified compatibility with the Canon RF lens mount standard. All provided hardware must strictly adhere to Trade Agreements Act compliance. The project is managed under NAICS code 443130, with the place of performance located in Quantico, Virginia. Interested parties must submit their responses by the deadline of December 4, 2026.
Camera and Photographic Supplies Stores

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 532490
New
Federal
Request For Information - Visual Information Systems Modernization (VISM)
Solicitation # M67854-27-I-2002
The Program Acquisition Executive Marine Corps, through the Program Manager Tactical Communications and Electromagnetic Warfare Systems, is conducting market research via solicitation M67854-27-I-2002 to identify vendors capable of providing commercial-off-the-shelf tactical camera systems, lenses, and accessories. This initiative aims to establish a sustainable, multi-year evergreen technology refresh cycle for the Visual Information Acquisition System Family of Systems using a Hardware-as-a-Service operating lease model. The selected vendor will be responsible for providing latest-generation equipment, managing the technology lifecycle, and executing a mandatory 36-month hardware refresh for all leased components. Key technical requirements include full Trade Agreements Act compliance for all hardware and native or certified compatibility with the Canon RF lens mount standard. The scope of work involves custom kitting, staging, and integration of multi-component systems, including the integration of Government Furnished Equipment laptops, with delivery in government-specified transit cases such as foam-cut Pelican cases. Additionally, the vendor must manage end-of-lease services, including physical return and verified data sanitization of storage media. Interested respondents must provide their business size under NAICS code 532490, details on held government contract vehicles, and cybersecurity compliance information such as CMMC levels. Submissions are required to be sent via DoD SAFE by December 4, 2026, and must include a cover sheet with CAGE and UEI/DUNS information. The government is requesting rough order of magnitude pricing based on an assumed three-year base period.
Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 313310
New
Federal
Multispectral Camouflage Overgarment
Solicitation # M6785426R5407
The Department of the Navy, United States Marine Corps, through the Portfolio Acquisition Executive Marine Corps, is seeking a small business contractor under NAICS code 313310 and PSC Code 8415 for the manufacture, testing, and delivery of Multi-Spectral Camouflage Overgarments. This procurement will be conducted using FAR Part 15 negotiated procedures for non-commercial supplies. The effort is a 100 percent small business set-aside, with the primary place of performance located in Quantico, Virginia. Due to the presence of Controlled Unclassified Information and Controlled Technical Information, the Statement of Work and Purchase Description are restricted and not available on SAM.gov. To access these documents, prospective offerors must undergo a rigorous vetting process, which includes submitting a formal request with CAGE and UEI details, providing proof of an active Joint Certification Program certification via DD Form 2345, verifying NIST SP 800-171 self-assessment scores in the Supplier Performance Risk System, and executing a Government-furnished Non-Disclosure Agreement. Once verified, documents will be distributed exclusively via DoD SAFE. The contract mandates strict adherence to cybersecurity and data handling standards, including DFARS 252.204-7012, NIST SP 800-171, 32 CFR Part 2002, and DoD Impact Level 5 requirements. Additionally, materials may be subject to ITAR and EAR export controls. Prime contractors are prohibited from sharing restricted materials with subcontractors or partners without prior written approval from the Contracting Officer and the execution of a Tri-Party Non-Disclosure Agreement. Questions regarding this pre-solicitation must be submitted using the provided template by 1600 hours Eastern on November 6, 2026.
Textile and Fabric Finishing Mills

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334220
New
Federal
Request For Information M67854-26-I-2023: Own Force Monitoring at Echelon (OFM-E) Electromagnetic Spectrum Sensing
Solicitation # M67854-26-I-2023
The Program Acquisition Executive Marine Corps, through the Program Manager Tactical Communications and Electromagnetic Warfare Systems, has issued Request for Information M67854-26-I-2023 to conduct market research for Own Force Monitoring/Sensing (OFM/S) capabilities. This effort specifically focuses on Own Force Monitoring at Echelon (OFM-E), seeking vehicle- or command post-mounted systems that provide real-time awareness, passive analysis, and monitoring of electromagnetic spectrum signatures. The goal is to enable Marine Corps units to establish baseline emissions, detect anomalies, and enforce emission control and signature management measures to enhance operational security and survivability in contested environments. The Marine Corps is seeking Commercial Off-The-Shelf (COTS) or Non-Developmental Item (NDI) solutions with a Technology Readiness Level of 8 or 9 that align with the Sensor Open Systems Architecture (SOSA) and feature improved size, weight, and power attributes. Interested businesses under NAICS code 334220 must submit a response package by November 5, 2026, including a specification compliance matrix, technical readiness assessments, and details regarding Technical Data Package rights. This RFI is for informational and planning purposes only and does not constitute a solicitation for bids or a commitment by the government to award a contract.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 541380
New
Federal
Multi-Spectral Performance Testing ServicesThis small business set-aside subcontract, titled Multi-Spectral Performance Testing Services, involves providing technical testing for prime contractors on US Marine Corps projects based in Quantico. The primary objective is to validate that overgarments meet specific multi-spectral requirements through the use of thermal imaging cameras and spectrophotometers to analyze visual, near-infrared, and thermal infrared signatures. The final deliverables for this engagement include validation certificates and detailed technical test reports. Due to the nature of the work, the contractor must adhere to strict security and compliance standards, including NIST SP 800-171, 32 CFR Part 2002, and DoD Impact Level 5 requirements for handling Controlled Unclassified Information. Additionally, a Downstream Entity NDA is required. The opportunity is categorized under NAICS code 541380 and is managed under the Department of Defense.
Testing Laboratories and Services

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 315990
New
Federal
Camouflage Overgarment Cut-and-Sew ContractorThis subcontract opportunity is for a Camouflage Overgarment Cut-and-Sew Contractor to support US Marine Corps projects under the Department of Defense. The selected contractor will be responsible for the precision cutting, sewing, and assembly of multi-spectral camouflage overgarments using industrial machinery and government-specified materials in accordance with the provided Purchase Description. Performance will take place in Quantico, Virginia. This is a total Small Business Set Aside under NAICS code 315990. To be eligible, contractors must meet strict security and regulatory requirements, including a NIST SP 800-171 self-assessment, DFARS 252.204-7012 compliance, and the execution of a Downstream Entity NDA. The response deadline for this opportunity is November 6, 2026.
Apparel Accessories and Other Apparel Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 313310
New
Federal
Multi-Spectral Camouflage Material SupplierThis small business set-aside subcontract involves the supply of specialized technical textiles for US Marine Corps multi-spectral camouflage projects. The selected supplier will manufacture fabrics designed to reduce visibility across visual, infrared, and thermal spectrums through the use of conductive blends or specialized coatings. Deliverables consist of fabric provided in either cut-lengths or bulk rolls to support prime contractors. Performance for this Department of Defense contract is centered in Quantico, Virginia. Due to the sensitive nature of the materials, the supplier must maintain DDTC registration and ensure strict compliance with ITAR and EAR regulations. Additionally, the successful candidate is required to execute a Downstream Entity NDA to protect project confidentiality.
Textile and Fabric Finishing Mills

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 541513
New
Federal
Marine Corps Cyberspace Environment (MCCE) Operational Support Services (OSS) and Enterprise Artificial Intelligence (AI) Integration
Solicitation # M6785426I4208
The Marine Corps Systems Command (MARCORSYSCOM) is conducting market research via Request for Information M67854-26-I-4208 to identify commercial partners for the Marine Corps Cyberspace Environment (MCCE) Operational Support Services (OSS) and Enterprise Artificial Intelligence (AI) Integration. The primary objective is to secure skilled, professional IT touch-labor services under a Government-Owned, Government-Operated, Contractor-Supported (GOGOCS) model. While the focus remains on providing DCWF-certified personnel, the government is seeking innovative ways to integrate AI and automation as embedded components of the service delivery model to increase operational efficiency and reduce manual labor costs over time. The government is specifically exploring service-based ordering models, such as procuring hours of service or specific outcomes rather than individual labor categories. For pricing purposes, any contractor-provided proprietary tooling costs must be included within fully burdened labor rates, as this is a services acquisition. Interested respondents must submit a capabilities narrative limited to five pages, a vendor comment matrix in Excel format with a 300-word limit per cell, and optional supplementary materials not exceeding fifteen pages. The current response deadline is November 3, 2026, at 1:00 P.M.
Computer Facilities Management Services

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 334418
Federal
Supply of Maincon PCB Retrofit Kit for Coldfire ProcessorThis subcontract involves the procurement and delivery of one retrofit Maincon printed circuit board, specifically part number 93-6405, designed for a Coldfire processor. The equipment is intended for prime contractors supporting projects at the Marine Corps Logistics Base in Albany, with the place of performance located in Barstow. The acquisition is managed by the Department of Defense and must be executed in compliance with FAR 12 commercial product standards. The project falls under NAICS code 334418, with a response deadline set for October 30, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

8 days ago

DEADLINE

in 1 day
View Details
NAICS: 334418
Federal
Supply of I/O PCB AC CCAThis subcontract involves the procurement and delivery of a specific printed circuit board assembly, Part Number 93-6442 (I/O PCB AC CCA), intended for use in industrial machinery. The equipment is destined for prime contractors working on projects at the Marine Corps Logistics Base in Albany, with the place of performance located in Barstow. The acquisition is managed under the Department of Defense and must comply with FAR 12 commercial product standards. The scope of work requires the delivery of one I/O PCB AC CCA unit. This opportunity falls under NAICS code 334418 and was posted on October 21, 2026, with a response deadline set for October 30, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

8 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 561622
Awarded
Federal
Locksmith Services
Solicitation # HSCG45-12-QLOCKSMITH
Base KODIAK(00045)

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 561622
Awarded
Federal
Locksmith Services
Solicitation # OPM19-11-Q-0008

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 561622
Awarded
Federal
Digilock ATS or Equal
Solicitation # FA4497-11-T-0030
FA4497 436 Cons Lgc

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 561622
Awarded
Federal
Office of Security HCHB Locksmith Services
Solicitation # SA1301-11-RQ-0023
Department Of Commerce Sspo

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 561622
Awarded
Federal
BACKUP LOCKSMITH SERVICES
Solicitation # DTOS59-11-Q-00076
693JK4 Ost

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 561622
Closed
Federal
Semi-Annual and Emergent Locksmith Services
Solicitation # WA-FY12-AR-666
W4MM USA Joint Munitions Command

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 561622
Awarded
Federal
SALTO LOCKS
Solicitation # N0001511042

POSTED

over 15 years ago

CLOSED

over 15 years ago
View Details
NAICS: 561622
Closed
Federal
Intimidator Bolt Type Manhole Locks
Solicitation # FA4625-11-Q-0025
FA4625 509 Cons Cc

POSTED

over 15 years ago

CLOSED

over 15 years ago
View Details
NAICS: 561622
Closed
Federal
Locksmith Services for USCG Headquarters Buildings
Solicitation # HSCGG8-11-Q-PWA530
LOG-9

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details
NAICS: 561622
Closed
Federal
Locksmith Services for USCG Headquarters Buildings
Solicitation # HSCGG8-11-P-PWA530
LOG-9

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details
NAICS: 561622
Awarded
Federal
Locksmith Services for USCG BSU Kodiak
Solicitation # HSCG45-11-P-KC001
Base KODIAK(00045)

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details
NAICS: 561622
Closed
Federal
Dorm Lock Maintainance
Solicitation # FA4855-10-Q-0136
FA4855 27 Socons Lgc

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS