Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Interior Fit-Out and Finishes

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Interior Fit-Out and Finishes involves the interior build-out of hotel guest rooms and common areas for projects located in the City of Temecula, California. The scope of work includes the installation of drywall, painting, flooring, and ceiling grids, as well as the placement of hotel-specific fixtures using materials such as carpet and acoustic ceilings. The primary objective is to deliver finished interior spaces that are fully prepared for the installation of furniture and equipment. This work is performed under NAICS code 238310 and is executed for prime contractors operating within the jurisdiction of the City of Temecula.

General Info

Interior fit-out subcontract for hotel guest rooms and common areas in Temecula, California.

Agency

California → City of Temecula

NAICS

238310 - Drywall and Insulation Contractors

Place of Performance

Temecula, CA

Set-Aside

NONE

Documents

This scope was carved out of PA26-0266.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Extension of Time (PA26-0266)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 14

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → City of Temecula

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → City of Temecula

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs interior build-out of hotel guest rooms and common areas for prime contractors on City of Temecula projects. Executes drywall installation, painting, flooring, ceiling grids, and installation of hotel-specific fixtures. Utilizes drywall, carpet, and acoustic ceilings. Delivers finished interior spaces ready for furniture and equipment.

Similar Contracts

Same NAICS industry code

Drywall and Finishes

University of California San Diego (UCSD)

POSTED

DEADLINE

Interior Finishes

Troy School District

POSTED

DEADLINE

Interior Finishes (Drywall, Paint, Flooring)

Business Services Department of Kern High School District

POSTED

DEADLINE

Interior Finishes & Drywall

POSTED

DEADLINE

in about 1 month

INSULATION SLEEVING

Solicitation # SPE8E6-26-T-4750

Solicitation SPE8E6-26-T-4750, issued by the Defense Logistics Agency Troop Support Construction and Equipment office, is for the procurement of 10 units of special thermal insulation pipe covering, identified by NSN 5640-01-116-6126. The contract requires delivery within five days after order, with shipping terms set as FOB Origin and inspection and acceptance also occurring at the origin. Deliveries are routed through a freight forwarder in Eddystone, Pennsylvania, for final shipment to the NATO Support Agency in Capellen, Luxembourg. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This procurement is subject to stringent security and regulatory requirements, including CMMC Level 2 certification and the safeguarding of covered defense information. Technical data associated with this item is subject to export controls under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the contract mandates compliance with the Berry Amendment and Buy American Act, requiring disclosure of any non-domestic materials. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while hazardous materials must be labeled per the Hazard Communication Standard.

Defense Logistics Agency

POSTED

DEADLINE

INSULATION BLOCK, TH

Solicitation # SPE8E6-26-T-4741

This Request for Quotations (RFQ) issued by DLA Troop Support is for the procurement of 11 sheets of plastic foam insulation blocks, identified by NSN 5640-01-031-1262. The technical specifications require the blocks to be 24 inches wide by 24 inches long with a thickness of 0.500 inches, a density of 7.5 pounds per cubic foot, and must be both flame proof and water repellent. This is a Foreign Military Sales (FMS) requirement intended for Australia, with the final shipment destined for the Joint Logistics Unit VIC in Bandiana, Australia. The solicitation was issued on September 29, 2026, with quotations due by October 9, 2026, via the DIBBS system. The contract incorporates several critical regulatory and technical standards, including the DLA Master List of Technical and Quality Requirements and strict packaging and marking protocols under MIL-STD-2073-1E and MIL-STD-129. Compliance with domestic sourcing regulations, such as the Buy American Act and the Berry Amendment, is required, and any use of non-domestic materials must be disclosed. Additionally, the contract includes provisions for hazardous material safety, cybersecurity safeguarding, and combating trafficking in persons. Inspection and acceptance are designated at the point of origin, and the successful contractor must utilize the Wide Area Workflow (WAWF) system for electronic payment requests and receiving reports.

Defense Logistics Agency

POSTED

DEADLINE

Concrete Sealant Installation Services

ORANGE COUNTY TRANSPORTATION AUTHORITY

POSTED

DEADLINE

Interior Framing & DrywallThis subcontract opportunity is for interior framing and drywall services to support prime contractors on facility projects managed by the State of Iowa Department of Administrative Services. The scope of work includes the installation of metal or wood stud framing, hanging gypsum wallboard, and completing the finishing process through taping, floating, and sanding to deliver completed interior walls and ceilings. The project falls under NAICS code 238310 and was posted on September 28, 2026. Interested parties must submit their responses by the deadline of October 28, 2026. Further details and application processes are available through the Iowa Department of Administrative Services procurement portal.

POSTED

DEADLINE

Metal Framing & Miscellaneous MetalsThis subcontract involves providing metal stud framing and miscellaneous metal work for facility projects at the US Embassy Brussels. The scope of work specifically requires the installation of metal framing to construct bathroom structures within an existing building, with the final deliverable being the completed framing and structure. The project is managed under the Department of State for the US Embassy Brussels, falling under NAICS code 238310. Performance will take place in Brussels, Belgium, with a response deadline set for November 3, 2026.

US Embassy Brussels

POSTED

DEADLINE

in about 1 month

Architectural Finishes & TilingThis subcontract opportunity is for the provision of architectural finishes and tiling services for facility projects at the US Embassy Brussels. The selected contractor will work under prime contractors to perform final interior finishes, specifically applying architectural techniques for wall and floor coverings in accordance with the Architectural New Finishes, Techniques, and Processing Specifications. The primary objective is the delivery of completed, high-quality finished interior surfaces. Managed by the Department of State, this project falls under NAICS code 238310 and will be performed in Brussels, Belgium. Interested parties must submit their responses by the deadline of November 3, 2026, at 13:00 UTC.

US Embassy Brussels

POSTED

DEADLINE

in about 1 month

Interior FinishesThis 8(a) set-aside subcontract through the Department of Defense and Navfacsyscom Mid-Atlantic involves providing comprehensive interior wall and floor finishing services for prime contractors at Naval Station Norfolk. The scope of work includes the installation of gypsum board supports and boards, porcelain tiling, acoustical ceilings, resilient wall bases, and carpeting, as well as the application of painting and coatings to deliver completed interior spaces. The project falls under NAICS code 238310 and is located in zip code 23511. Interested parties must submit their responses by the deadline of October 23, 2026.

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

Interior FinishesThis subcontract opportunity with the Department of Veterans Affairs, managed by Pcac, focuses on the supply and installation of interior finishes for medical clinic projects. The scope of work involves partnering with prime developers to deliver finished interior spaces ready for occupancy, specifically through the installation of drywall, painting, commercial carpeting, and medical-grade flooring. The project falls under NAICS code 238310 and was posted on September 28, 2026. Interested parties must submit their responses by the deadline of November 30, 2026, at 5:00 PM.

POSTED

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS