Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

INTRODUCER, ENDOTRACHEAL TUBE

Awarded

SPE2DS-26-T-217UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 1,000 units of a bougie-to-go endotracheal tube introducer with a coude tip, each measuring 15 FR by 60 cm, latex-free, sterile, and designed to fit tracheal tubes ranging from 6 to 11 mm in diameter. The item is single-use and must comply with the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition type. The National Stock Number is 6515-01-643-6358, and delivery is required within 55 days after award. Bidders must clearly specify the source and part number being supplied, and all non-accepted supplies must be free of government identification as per requirement RQ011. The solicitation, identified as SPE2DS-26-T-217U, was posted on July 9, 2026, with responses due by July 15, 2026, under a federal procurement managed by the Department of Defense’s Medical Supply Chain, with performance located in Jacksonville, Florida, and primary point of contact Vernon Stevenson.

General Info

DOD seeks 1,000 endotracheal introducers via federal procurement, deadline July 15, 2026, through DIBBS.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$6,660

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

SZY HOLDINGS, LLCView Profile

Award Issued Date

08/04/2026, 12:00:00 AM UTC

Documents

(2)

SPE2DS-26-T-217U RFQ

PDF•19 pages•rfq

Delivery Order SPE2DS-26-V-8437 for Medical Supplies

PDF•13 pages•delivery-order

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseAwarded

PostedJul 9

Solicitation

Amendment 1Jul 9

Contract was updated

AwardedAug 4

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

Contacts

Vernon Stevenson

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE2DS26V8437 posted on DIBBS. Awardee: SZY HOLDINGS, LLC (CAGE 0AG09) Total Contract Price: $6,660.00 Award Date: 08-04-2026 Solicitation: SPE2DS-26-T-217U Line items: - INTRODUCER, ENDOTRACHEAL TUBE (NSN/Part 6515016436358, PR 7017439618)

Similar Contracts

Same NAICS industry code

6515--Chiropractic Tables

Solicitation # 36C25926Q0811

Solicitation number 36C25926Q0811, issued by the Department of Veterans Affairs Network Contract Office 19, seeks the delivery of two chiropractic tables for the VA SLC Utah Health Care System located in Salt Lake City, Utah. This combined requirement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 339113. The primary point of contact for this procurement is Contract Specialist Charles Morton. The solicitation process includes a deadline for questions on September 4, 2026, with final quotes due by September 14, 2026, at 4:00 PM. Performance of the contract is subject to the guidelines of Wage Determination No. 2015-5489, Revision 27, which governs labor standards and wage rates for service contract work within Salt Lake and Tooele counties in Utah.

Network Contract Office 19 (36C259)

POSTED

about 16 hours ago

DEADLINE

STERIS InnoWave Irrigator

Solicitation # 36C24126Q0765

241-NETWORK Contract Office 01 (36C241)

POSTED

about 16 hours ago

DEADLINE

Supply of Medical Kit Components (Hydrogel and Gauze)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Sterile Combat Eye Shield Kits

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Nasal Oxygen Cannulas (NSN 6515-01-552-1481)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720014715008)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of CSF Drainage Collection Bags

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Surgical Drain Valves

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

TCCC Casualty Simulation Trainer Production

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Sternal Intraosseous Puck Production

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Sterile Surgical Sponge Supplier

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supplier of Nonmetallic Hose (NSN 4720-00-006-9541)

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 11 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 11 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 11 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 11 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 11 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Storage Batteries (NSN 6140-01-713-7559)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

The Defense Logistics Agency, through DLA Land and Maritime, has issued solicitation SPE7L7-26-T-5218 as a Request for Quotations for three storage batteries, identified by NSN 6140017137559. This procurement is a total small business set-aside under NAICS 335910, with a response deadline of September 21, 2026. The required hardware must meet the specifications for East Penn Manufacturing Co. part number 18-G75-21EE IST6G08-NAV1 and is designated as a critical application item. The items have a non-extendable shelf life of 12 months and must be delivered to NAVSUP FLC Yokosuka in Japan within 20 days after receipt of order. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with specific labeling requirements for hazardous materials per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. All quotes must be submitted electronically via the DIBBS system. The award process may utilize automated award and incorporates the HUBZone price evaluation preference. Compliance with various FAR and DFARS clauses is required, including those regarding cybersecurity safeguarding, the Berry Amendment, and the Buy American Act. Invoicing and payment must be processed through the Wide Area Workflow system.

Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS