Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

SPONGE, SURGICAL

Active
SPE2DS-26-T-271RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 5 boxes of surgical sponges, each containing 50 units, with the item specified as a 4x4 inch, 4-ply, non-woven, white, highly absorbent sponge made from a rayon/polyester blend, sterile and disposable, and not made with natural rubber latex. These sponges are intended for general surgical use including prepping, wiping, and wound care. Each box constitutes a unit of issue, and the product must have a shelf life of 60 months from manufacture, with no more than nine months elapsed between the date of manufacture and the date of delivery to the government. The item is identified by NSN 6510-01-683-2892 and is under purchase request 7017611430. The solicitation, numbered SPE2DS-26-T-271R, was posted on July 26, 2026, with a response deadline of August 3, 2026, and requires delivery within 20 days of award. The procurement is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF office, with performance location in Annville, Pennsylvania, and the primary point of contact is Seth Tootell. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must conform to DLA standards. Government identification must be removed from any non-accepted supplies, and compliance with these requirements is mandatory for acceptance.

General Info

Procurement of five surgical sponges via DLA solicitation due August 3, 2026, open to all contractors.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

322291 - Sanitary Paper Product ManufacturingView NAICS

Place of Performance

FORT INDIANTOWN GAP FTIG, ANNVILLE, PA, 17003-5003, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DS-26-T-271R Medical Supply Chain

PDFrfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS

Full Description

Show more
SPONGE,SURGICAL
SPONGE, SURGICAL
ALL PURPOSE, VERSALON RAYON/POLYESTER BLEND 4X4"<(>,<)>
4 PLY; HIGHLY ABSORBENT, WHITE, NON-WOVEN, STERILE<(>,<)>
NOT MADE WITH NATURAL RUBBER LATEX, DISPOSABLE<(>,<)>
IDEAL FOR PREPPING, WIPING, WOUND CARE AND MORE.
UNIT OF ISSUE: BOX/50EACH
..
SHALL HAVE A SHELF LIFE OF 60 MONTHS. NOT MORE THAN 9 MONTHS SHALL HAVE
ELAPSED FROM THE DATE OF MANUFACTURE TO THE DATE OF DELIVERY TO THE
GOVERNMENT.
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
ADEQUATE DATA FOR THE NSN/Part Number: 6510-01-683-2892 Quantity: 5 BX Purchase Request: 7017611430QTY: 5 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 322291
New
DIBBS
Hazardous Materials Packaging and PreservationThe contract requires the design and supply of specialized packaging systems compliant with MIL-STD-2073-1E and DLA RP001 standards to preserve frozen human serum controls during international transport, ensuring a guaranteed 24-month shelf life under controlled conditions. The packaging must be engineered to maintain cryogenic integrity throughout shipment, withstand extreme environmental stresses, and meet strict hazardous materials handling protocols for global logistics. The solution must integrate robust thermal insulation, impact-resistant materials, and validated cold chain technologies to prevent degradation of the serum controls from production to final use. Performance is centered on the APO 09227-0000 location with delivery expected to support Department of Defense medical supply chains, specifically under the MEDICAL SUPPLY CHAIN MD SURG FSF. The effort falls under NAICS code 322291, indicating classification as other paper product manufacturing, and is structured as a subcontract opportunity with a narrow response window closing on August 3, 2026. All packaging systems must undergo rigorous validation to prove consistent performance across diverse climate zones and extended transit times, with compliance documentation and testing reports required to demonstrate adherence to military and logistics preservation standards without exception.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 322291
New
DIBBS
ADHESIVE TAPE, SURGICALAdhesive tape, surgical, is prescribed as a latex-free athletic trainer’s tape in white, designed for sports medicine applications with easy tearing and unwinding to the core for rapid application. It features a hospital-grade 100 percent cotton backing with a zinc oxide-based adhesive offering high tensile strength, excellent tackiness, and conformability, while colorfast dyes ensure no bleeding. Each unit is packaged as a set of six, with the unit of issue specified as a package containing six individual tapes. All packaging must comply with commercial standards as outlined in the procurement document, ensuring sealed unit containers protect against damage and breakage, and exterior shipping containers are suitable for safe delivery via common carriers at the lowest cost to the designated point of delivery. Marking must adhere strictly to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The product is governed by specific technical and quality requirements listed in the DLA Master List, with applicable revisions controlled by the solicitation or award date. Government identification must be removed from non-accepted supplies. The NSN is 6510-01-699-4351, with a quantity of two packages required, delivered within 20 days against Purchase Request 7017609530. The solicitation number is SPE2DS-26-T-270B, issued by the Department of Defense’s Medical Supply Chain, with performance to occur at Fort Bragg, North Carolina, and bids must include the source and part number being offered.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 322291
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of AC motors in strict compliance with MIL-STD-2073-1E standards to safeguard against moisture, corrosion, and environmental degradation during transit and long-term storage. This task demands specialized materials and procedures designed for military-grade durability, ensuring that each unit remains fully operational upon retrieval, regardless of exposure to harsh conditions. All packaging methods must meet or exceed federal specification requirements for military logistics, including proper sealing, desiccant use, corrosion inhibitors, and protective wrapping techniques validated under the standard. The solicitation is categorized as a subcontract under NAICS code 322291, indicating it relates to other wood product manufacturing, though the actual scope focuses on industrial packaging systems for electromechanical equipment. The contract was posted on July 23, 2026, with a response deadline of August 3, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. Performance is scheduled to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002. Although no point of contact or set-aside details are provided, bidders must ensure full alignment with military packaging protocols and be prepared to demonstrate compliance, capacity, and quality assurance practices for delivering units that meet defense readiness standards.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 484220
New
DIBBS
Cold Chain Logistics and Specialized TransportationThe contract encompasses the specialized transportation of frozen biological materials requiring strict temperature control between -20°C and -70°C, moving these sensitive payloads from the manufacturer to APO and various locations in Germany. This subcontract mandates the use of certified, temperature-monitored freight services to ensure the integrity and safety of the biological materials throughout transit, with compliance to stringent cold chain protocols being non-negotiable. The logistics operation must guarantee uninterrupted thermal stability, real-time monitoring, and documented evidence of temperature adherence at every stage of the journey. Issued under the NAICS code 484220 for specialized freight transportation, this solicitation is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office. The response deadline is August 3, 2026, with performance centered on the APO ZIP code 09227-0000 as the primary point of delivery, alongside multiple endpoints in Germany. The nature of the cargo demands end-to-end traceability, secure handling procedures, and adherence to federal regulations governing the transport of biohazardous and thermally sensitive medical materials, making this a high-stakes logistics engagement requiring certified expertise in pharmaceutical and biological cold chain distribution.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
Disposable Rebreathing Oxygen Mask ManufacturingThe contract seeks the manufacture and supply of disposable adult rebreathing oxygen masks that meet strict technical specifications outlined by the Defense Logistics Agency, identified by NSN 6515-01-519-6766. These masks must comply with rigorous standards for material safety, biocompatibility, and packaging to ensure clinical effectiveness and patient protection. All products are intended for use in military medical environments and must adhere to performance and quality benchmarks established by the Department of Defense. The place of performance is designated as Fort Stewart, Georgia, with deliveries expected to support ongoing medical supply operations at this location. This is a subcontract opportunity under the NAICS code 339112, which pertains to medical equipment and supplies manufacturing. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, allowing qualified manufacturers a limited window to submit proposals. While the solicitation number is not provided, interested parties can access further details through the official DIBBS portal using the provided link. This procurement is part of the Medical Supply Chain under the Department of Defense, ensuring that frontline medical personnel have reliable, single-use oxygen delivery systems consistent with military health and safety mandates.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details