Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Item Unique Identification (UID) Marking and Data Submission

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires the application of DFARS-compliant two-dimensional data matrix UID markings to control boxes, ensuring each unit is uniquely identified in accordance with Department of Defense standards. The responsible party must also submit all required UID data to the DoD through the WAWF system or an approved equivalent, guaranteeing full traceability and inventory accuracy across the defense supply chain. The work is to be performed at Hill Air Force Base, Utah, with a strict deadline for response submission on August 19, 2026, and the solicitation was posted on August 3, 2026. This is a Small Business Set Aside contract, classified under NAICS code 541330, meaning only eligible small businesses can compete, and it is structured as a subcontract within the broader DoD procurement framework.

General Info

Apply DFARS-compliant UID markings to control boxes at Hill AFB, submit data via WAWF, small business set aside, respond by August 19, 2026.

Agency

Department Of Defense → FA8228 Afsc Ol H PzimView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Hill Air Force Base, UT, 84056, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8228 Afsc Ol H Pzim
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA8228 Afsc Ol H Pzim
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Apply DFARS-compliant 2D data matrix UID markings to control boxes and submit required data to DoD via WAWF or equivalent system.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SLED
Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.
Construction Management

POSTED

about 7 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SLED
Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.
Aviation Facilities & Infrastructure

POSTED

about 7 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
Structural Engineering Design for Marine Davit InstallationThe contract requires comprehensive structural engineering design services for the installation of a Viking Norsafe E-60 Conventional Lifeboat Davit at Pier 7, encompassing all phases from load analysis and foundation evaluation to reinforcement design and final documentation. The engineering deliverables must include stamped drawings and a detailed bill of materials, ensuring compliance with applicable structural and marine safety standards. The scope demands precise analysis of existing pier conditions to confirm structural integrity and determine necessary modifications to safely support the davit system under operational and environmental loads. This is a subcontract opportunity classified under NAICS code 541330 for engineering services, reserved exclusively for small business categories including SBA-certified small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, veteran-owned small businesses, and service-disabled veteran-owned small businesses. The solicitation was posted on August 4, 2026, with a response deadline of August 6, 2026, and is administered by Tongue Point Job Corps, though no physical address or point of contact details are provided. The work is to be performed at Pier 7, with all deliverables subject to approval and alignment with the client’s operational and safety protocols for marine infrastructure.
Tongue Point Job Corps

POSTED

about 12 hours ago

DEADLINE

in 1 day
View Details
NAICS: 541330
New
System Testing, Commissioning, and DocumentationThe contract requires the performance of NFPA 72-compliant testing, commissioning, and detailed documentation for fire alarm and detection systems, ensuring all components meet applicable fire safety standards. A Record of Completion must be submitted as part of the deliverables to certify that all system functions have been properly verified and documented in accordance with regulatory requirements. The work is to be conducted at the Earle C. Clements Job Corps Center, though specific location details are not provided, and the project supports critical life safety infrastructure for the facility. This is a subcontract opportunity reserved exclusively for small business categories under SBA set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The North American Industry Classification System code 541330 indicates the work falls under engineering services, and the response deadline is August 10, 2026, with the solicitation posted on August 4, 2026. The opportunity is accessible via the SBA’s online portal for federal contracting opportunities.
Earle C. Clements Job Corps Center

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541330
New
Testing, Adjusting, and Balancing (TAB) ServicesThe contract requires the performance of Testing, Adjusting, and Balancing (TAB) services on existing hot water circulation pumps to ensure they operate in alignment with the system’s design specifications. This work is critical to optimizing heating efficiency, maintaining proper flow rates, and ensuring system reliability across the facility. The task involves comprehensive diagnostic evaluation, calibration, and fine-tuning of the pumps to meet established performance benchmarks, with adjustments made to accommodate the building’s hydraulic and thermal load requirements. The contract is classified as a subcontract under the SBA’s small business set-aside programs, which include eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. It falls under NAICS code 541330 for Engineering Services and is issued by Serrato Corporation DBA Flint Hills Job Corps. Respondents must submit proposals by the deadline of August 13, 2026, though no specific location for performance is provided in the data, and no point of contact details are available. The posting date indicates this opportunity was made public on August 4, 2026, and the solicitation link directs to a federal opportunity portal for further administrative details.
Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541330
New
Factory-Certified Boiler Start-Up and CommissioningThe contract requires factory-certified start-up and commissioning of boiler control systems, encompassing circulation pumps, sensors, and reset controls, ensuring full operational compliance with manufacturer standards. All work must be performed by certified technicians authorized by the boiler equipment manufacturer to validate system integrity and performance post-installation. This is a subcontract under a small business set-aside designation, open to SBA-recognized categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The NAICS code 541330 categorizes this as professional, scientific, and technical services related to engineering. The solicitation was posted on August 4, 2026, with a response deadline of August 13, 2026, and the performance location is managed by Serrato Corporation DBA Flint Hills Job Corps, though specific site details are not provided.
Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541330
New
SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT
Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water
GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California. The project requires professional services such as engineering, environmental consulting, surveying, geotechnical analysis, permitting, public outreach, and utility location, with a focus on engaging disadvantaged, small, women-owned, minority-owned, and veteran-owned businesses. The solicitation prioritizes participants certified under various set-aside programs including DBE, SBE, WBE, MBE, SDB, WOSB, VOSB, and SDVOSB, aligned with SBA and Department of Transportation guidelines. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents no later than 5 PM PST on August 14, 2026, with final responses due by September 15, 2026. Primary contact is Charlie Brown at charles.brown@ghd.com, and the NAICS code associated with the work is 541330 for architectural and engineering services.
GHD Inc.

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Engineering Design Services
Solicitation # TPJCC Engineering Design Services 26-17
This contract is a fee-for-service solicitation issued by Management & Training Corporation (MTC) on behalf of the Tongue Point Job Corps Center in Astoria, Oregon, for engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7. The scope of work requires a licensed Professional Engineer to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials to support the installation, with deliverables including electronic PDF copies and one full-size printed drawing set. The contract is classified under NAICS code 541330 for Engineering Services with a size standard of $9 million and is set aside exclusively for small business, small disadvantaged business, women-owned small business, HUBZone small business, veteran-owned small business, and service-disabled veteran-owned small business concerns. All subcontractors must self-certify their business category, possess a Unique Entity Identifier (UEI), provide a valid Taxpayer Identification Number, and disclose debarment status if their subcontract exceeds $30,000. The contractor must comply with Service Contract Labor Standards, pay at least the federal contractor minimum wage as mandated by Executive Order 13658, and adhere to Wage Determination SCA WD 2015-5577 Rev. 28. The contract includes stringent data protection obligations requiring compliance with DOL and federal data privacy guidelines, including encryption of personally identifiable information, reporting of any breach to the Department of Labor within one hour of discovery, and a prohibition on retaining or disseminating any deliverables containing Privacy Act or FOIA-exempt data. The contractor is required to submit proposals via email to Elizabeth Williamson at Williamson.elizabeth@jobcorps.org by 2:00 PM PST on August 6, 2024, and must include a completed bid sheet, W-9 form, self-certification form, and acceptance of MTC’s terms and conditions. Invoices must be submitted to MTC’s corporate office in Centerville, Utah, and must contain the purchase order number, dates of service, itemized pricing with extended unit rates and totals, and invoice number and date. Payment is conditioned upon delivery and acceptance of services. The contractor must also indemnify MTC against all claims arising from their performance, negligence, or breach of contract, though insurance is not required for this project. Termination is permitted by either party with thirty days’ written notice, or immediately if funding is withdrawn.
Tongue Point Job Corps

POSTED

about 12 hours ago

DEADLINE

in 1 day
View Details
NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # C2305
Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project involves replacing an existing groundwater production well with a new 24-inch diameter stainless steel Ful-Flo louvered well screen, matching existing vertical turbine equipment and integrating discharge piping into the Corydon Blend station and Malaga blending location, in full compliance with AWWA, SWRCB, DWR, and EVMWD standards. Services encompass structural, geotechnical, architectural, noise, survey, corrosion, and potholing engineering, delivered in two distinct phases: Phase 1 focuses on civil site design, technical specifications, line-bid items for drilling and well abandonment, bid assistance, and full-time on-site construction management oversight; Phase 2 covers detailed architectural, mechanical, electrical, instrumentation, and controls design for equipment, testing, and commissioning. The contract requires submission of a detailed cost proposal broken down by task, with total estimated project costs at $2,260,788 including $2 million in construction costs and a negotiable not-to-exceed professional services fee. Proposals must adhere to strict format requirements, including a cover letter, demonstrable project experience, resumes of primary staff and subconsultants, three references, and a comprehensive scope of work. Key attachments include Exhibit B for the Schedule of Services, Exhibit C for compensation rates, and Attachment 2 which mandates completion of certifications for American Iron and Steel compliance, lobbying, debarment/suspension, SAM information, DBE subconsultant disclosures, Executive Order N-6-22, conflict of interest, insurance acknowledgment, and public works registration. All proposers must be certified DBEs and submit comprehensive data on any DBE subconsultants used, including certification numbers and justifications for non-selection. The evaluation process prioritizes relevant qualifications and experience (25%), followed by understanding of the project and technical approach (25%), scope and schedule (20%), innovation (10%), cost and value (10%), and overall proposal quality (10%), with award based on demonstrated competence rather than lowest cost. Mandatory compliance requirements include adherence to the Build America Buy America Act, prohibition of covered telecommunications equipment from Huawei or ZTE, sanctions compliance under Executive Order N-6-22
Ardurra Group, Inc.

POSTED

about 12 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction
Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0
The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction to replace an existing water well in Lake Elsinore, Riverside County, California. The contract, identified as C2305, is solicited by AKM Consulting Engineers and is classified under NAICS code 541330 for architectural and engineering services. The project emphasizes the involvement of Disadvantaged Business Enterprises as part of a transportation department set-aside, encouraging participation from underrepresented firms. Key deliverables include comprehensive design work, assistance with the procurement and bidding process, and ongoing engineering oversight throughout construction to ensure compliance, quality control, and timely completion. The official response deadline is September 1, 2026, with primary point of contact being Katie Neubauer of AKM Consulting Engineers, reachable via phone or email for inquiries. All project details and opportunities are accessible through the SBA’s opportunity portal.
AKM Consulting Engineers

POSTED

about 12 hours ago

DEADLINE

in 27 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # WO# C2305
The Corydon Well Replacement Project involves the design of a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District (EVMWD) property, with full integration into the existing transmission infrastructure. The project is divided into two phases: Phase 1 focuses on the design of the new well and abandonment of the old one according to Riverside County and California State Water Resources Control Board standards, including technical specifications, civil site design, line-bid items, bidding support, and full-time construction management and hydrogeological oversight during drilling; Phase 2 covers the engineering design for well equipping, including architectural, civil, mechanical, structural, electrical, and instrumentation and controls systems for testing and commissioning, with ongoing engineering support during construction. The well casing must be 24-inch diameter stainless steel Ful-Flo louvered screen matching the existing casing depth, with sanitary seal placement compliant with AWWA standards. All work must adhere to Build America, Buy America Act requirements, including documentation of domestic content for iron, steel, and manufactured products, and compliance with federal procurement rules under 2 CFR Part 184. The project is funded in part by a $400,000 Bureau of Reclamation grant, with the remainder covered by non-federal sources, triggering full compliance with Title 2 CFR Part 200, including debarment and suspension rules, lobbying restrictions under the Byrd Act, Clean Air Act and Clean Water Act subrecipient clauses applicable to subcontracts over $150,000, and procurement of recovered materials when purchases exceed $10,000. The Consultant must provide comprehensive services including hydrogeological analysis, borehole geophysics, geotechnical investigation, water quality sampling, environmental permitting with SWRCB coordination, civil and structural engineering, utility coordination, topographic and boundary surveying, construction inspection, QA/QC, and community outreach. All key personnel must be identified with resumes, professional licenses, and certification details, and the firm must demonstrate experience with municipal groundwater projects and public agency collaboration. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, with a not-to-exceed limit anticipated of $1,000,000. The contract requires monthly invoicing with progress reports, adherence to a 45-day payment term, and records retention for four years post-final payment. The Consultant must comply with the EVMWD
GEI Consultants, Inc.

POSTED

about 12 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541330
New
SLED
Request for Proposals for Professional Engineering Staff Augmentation Services
Solicitation # RFP 130-13479
Grant County PUD is seeking proposals for Professional Engineering Staff Augmentation Services under RFP 130-13479, an open solicitation with a clarification deadline of August 20, 2026, and a submission deadline of August 27, 2026. The estimated contract value is provided for informational purposes only and may be subject to change. The request is for qualified firms to provide engineering personnel to support ongoing projects, with all proposals to be submitted offline. Bidders must register and log in to access bid-related communications and question-response details. The point of contact for inquiries is Justin Heilman, District Representative, reachable at jheilman@gcpud.org, with additional procurement support available from Nicona Myers at Nbutler@gcpud.org. The contract is targeted toward organizations capable of delivering skilled engineering resources in Washington State, and prequalification may be required. The solicitation was posted on August 3, 2026, and remains open for bidding.
Grant County PUD

POSTED

about 17 hours ago

DEADLINE

in 23 days
View Details

More opportunities from Department Of Defense → FA8228 Afsc Ol H Pzim

Same awarding agency

NAICS: 484220
New
Federal
Logistics and Delivery to Hill Air Force BaseThree control boxes must be shipped to Hill Air Force Base in Utah with full compliance to military packaging and labeling standards, including proper DoDAAC F2DCBL identification and coordinated delivery procedures. The contract is a small business set aside under NAICS code 484220, focusing on specialized transportation and logistics services, and is issued by the Department of Defense under the FA8228 AFSC OL H PZIM office. All work must be completed and delivered by the response deadline of August 19, 2026, at 5:30 AM ET to meet operational requirements at the designated installation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 336340
New
Federal
Supply of Cummins Control Boxes (BEAR Engine)The contract entails the procurement and delivery of three new Cummins Control Boxes, part number A034H205, specifically designed for the BEAR Engine, with each unit required to be verified as being in 'A' condition and covered by the manufacturer’s warranty. The solicitation is structured as a subcontract under a Small Business Set Aside classification, ensuring eligibility and preference for small businesses, and falls under the NAICS code 336340 which pertains to aircraft engine and engine parts manufacturing. The response deadline is August 19, 2026, at 5:30 a.m., with the contract posting date set for August 3, 2026. Performance of the contract is obligated at Hill Air Force Base with a zip code of 84056, indicating the designated location for delivery and potential inspection. The awarding agency is the Department of Defense through the office FA8228 Afsc Ol H Pzim, though no specific point of contact details are provided. The contract is accessible via a public SAM.gov link for additional details, and while no set-aside value or maximum award amount is specified, the classification as a total small business set aside implies the entire opportunity is reserved for qualified small business vendors.
Motor Vehicle Brake System Manufacturing

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 335313
New
Federal
Bear Engine Control Boxes
Solicitation # FA822826R0007
The contract seeks the procurement of three Cummins Control Boxes with Part Number A034H205 specifically designed for the BEAR Engine, with all units required to be verified as A condition parts and must include the manufacturer's warranty. The solicitation, titled Bear Engine Control Boxes and identified by number FA822826R0007, was posted on August 3, 2026, with a response deadline of August 19, 2026, at 5:30 a.m. local time. This is a combined solicitation under a Small Business Set Aside, classified under NAICS code 335313, restricting eligibility to small businesses. The contract is managed by the Department of Defense through the office located at Hill Air Force Base in Utah, with the primary point of contact being Nathanial Littlewood and secondary contact Merrick Flygare. All performance will occur at Hill Air Force Base, and interested parties must submit proposals through the SAM.gov portal using the provided link.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 561910
New
Federal
Packaging, Crating, and Marking of Milled Wing SkinsThe contract requires the secure packaging, crating, and palletization of milled wing skins for return shipment, with strict emphasis on reusability and component protection to prevent damage during transit. Each crate must be clearly labeled to ensure aircraft tail numbers remain visibly identifiable at all stages of handling, and all labeling must comply with military and aviation standards to maintain traceability and operational readiness. The work must be performed using durable, reusable materials and methods that support multiple cycles of use without compromising structural integrity or safety. This subcontract is a Small Business Set Aside under NAICS code 561910, exclusively available to small businesses, and is managed by the Department of Defense through the office at Hill Air Force Base with a zip code of 84056. The solicitation was posted on July 29, 2026, with a firm response deadline of August 28, 2026, at 5:30 a.m. The place of performance is designated at Hill Air Force Base, and while no point of contact is listed, proposers are expected to adhere to all DoD packaging specifications and ensure full compliance with federal acquisition standards for defense-related logistics and handling.
Packaging and Labeling Services

POSTED

6 days ago

DEADLINE

in 24 days
View Details
NAICS: 541330
New
Federal
First Article Inspection (FAI) and Quality Assurance SupportThe contract involves comprehensive support for the preparation and execution of First Article Inspection (FAI) specifically for milled wing skins, requiring detailed documentation, precise measurement validation, and timely reporting of any non-conformances in coordination with government engineering teams. The work is critical to ensuring compliance with military aerospace standards, with emphasis on accuracy, traceability, and adherence to technical specifications throughout the inspection process. All activities must be conducted in alignment with established quality assurance protocols and government expectations for manufacturing verification. This subcontract is a Small Business Set Aside under NAICS code 541330, designated for businesses classified as small by the SBA, and is tied to performance at Hill Air Force Base with a zip code of 84056. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026, at 5:30 AM. The contracting activity falls under the Department of Defense, specifically the FA8228 AFSC OL H PZIM office, indicating the work is part of a larger defense production or sustainment effort. Participation requires full compliance with federal subcontracting standards and the ability to interface directly with government engineering personnel to resolve technical findings and ensure airworthiness certifications are met.
Engineering Services

POSTED

6 days ago

DEADLINE

in 24 days
View Details
NAICS: 484220
New
Federal
Transportation and Logistics for Government-Furnished Wing SkinsThe contract involves the secure pickup, transportation, and return delivery of F-16 wing skins between Hill Air Force Base and designated contractor facilities, ensuring the safe handling of Government-Furnished Property throughout the entire logistics process. Work must adhere to strict protocols for safeguarding sensitive aerospace components and maintaining compliance with all applicable defense and transportation regulations. The contractor is required to meet precise delivery timelines and demonstrate proven capability in managing high-value military assets with zero tolerance for delay or damage. This is a Small Business Set Aside subcontract under NAICS code 484220, reserved exclusively for small businesses, and managed by the Department of Defense through FA8228 Afsc Ol H Pzim. Performance is centered at Hill Air Force Base, Utah, with all activities tied to the successful execution of wing skin movements and returns. Responses are due by August 28, 2026, and the contract emphasizes reliability, security, and regulatory adherence as critical performance metrics.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

6 days ago

DEADLINE

in 24 days
View Details
NAICS: 332710
New
Federal
Precision CNC Milling of F-16 Wing SkinsThe contract calls for high-precision CNC milling of F-16 lower wing skins with strict requirements to maintain a uniform Inner Mold Line thickness while ensuring the Outer Mold Line and all critical hole patterns remain untouched and intact. This work is essential for structural integrity and aerodynamic performance, requiring advanced machining capabilities and strict quality control procedures. The task demands expertise in aerospace-grade materials and the ability to meet tight tolerances without compromising part geometry or historical specifications. This is a Small Business Set Aside under NAICS code 332710, specifically designated for total small business participation, and is managed by the Department of Defense under the agency FA8228 Afsc Ol H Pzim. Performance is required at Hill Air Force Base with a zip code of 84056. The solicitation was posted on July 29, 2026, and responses must be submitted by August 28, 2026, by 5:30 a.m. local time, positioning it as a time-critical subcontracting opportunity targeted exclusively at qualified small businesses capable of delivering precision aerospace component manufacturing.
Machine Shops

POSTED

6 days ago

DEADLINE

in 24 days
View Details
NAICS: 332710
New
Federal
F-16 Wing Skin Milling BPA
Solicitation # FA822826R0006
The contract is for a five-year Basic Ordering Agreement to procure F-16 Wing Skin Milling Services in support of the 309th Engineering and Maintenance Group, with the solicitation number FA822826R0006 and a posted date of July 29, 2026. The opportunity is a Small Business Set Aside, meaning only small businesses are eligible to respond, and the NAICS code 332710 identifies it as a precision machining and metal fabrication service. Responses are due by August 28, 2026, at 5:30 a.m. MST, and the work will be performed at Hill Air Force Base in Utah. The contract is issued by the Department of Defense under the Air Force Sustainment Center, with the office located at Hill AFB, UT 84056-5805. Primary point of contact is Michael Checketts, reachable at 801-586-6638 or michael.checketts@us.af.mil, with Merrick Flygare as the secondary contact at 801-775-2223 or merrick.flygare@us.af.mil. The full solicitation can be accessed via the SAM.gov workspace link provided, and the procurement is classified as a combined solicitation under federal acquisition regulations. All potential offerors must meet small business size standards and have the technical capability to perform high-precision milling on F-16 wing skin components to fulfill the government’s maintenance and modernization needs over the contract term.
Machine Shops

POSTED

6 days ago

DEADLINE

in 24 days
View Details
NAICS: 335313
Federal
Supply of Cummins Control Boxes (P/N A034H205)The contract entails the procurement and delivery of three Cummins Control Boxes, part number A034H205, for integration into the BEAR Engine Workload system located at Hill Air Force Base, Utah, with a zip code of 84056. The effort is designated as a total small business set-aside under the SBA program, ensuring exclusive eligibility for small businesses as defined by the Federal Acquisition Regulation. The North American Industry Classification System code 335313 identifies the scope as related to electrical equipment manufacturing, indicating the technical nature of the components involved. This subcontract is part of a Department of Defense initiative under the FA8228 AFSC OL H PZIM office, aimed at enhancing operational capabilities through specialized engine system integration. Delivery and installation are to be performed at the designated military installation, with the work scheduled under a solicitation posted on June 29, 2026, and no alternative funding or set-aside mechanisms are specified aside from the small business designation.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 1 month ago

DEADLINE

N/A
View Details