Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on August 1, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

J--Heavy Metals Based Paint Removal, McNary Lock and Dam

Awarded
W912EF14Q0238Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910
New
Theatre Mold Remediation Scope of Work
Solicitation # AT25-0006
Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was prompted by a sprinkler system failure and requires the removal and remediation of mold throughout the building, including the cleaning or replacement of theater seating cushions and the removal of affected drywall, gypsum wallboard, and acoustical ceiling tiles. All work must be performed in accordance with ANSI/IICRC S520 standards, EPA and OSHA regulations, and the Micro Air Inc. Mold Testing report dated April 11, 2024. The contractor is required to provide a Certified Industrial Hygienist to verify materials and conduct final clearance walkthroughs, as well as a detailed mold remediation plan. This is a single lump sum contract awarded based on best value, with evaluation weights distributed across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Bidders must be licensed contractors in the state of Indiana and provide certification of compliance with Davis Bacon Act wage rates. Required submission documents include a detailed cost breakdown, a timeline for substantial completion, a W9, a vendor questionnaire, and proof of insurance naming Adams and Associates, Inc. as an additional insured. The contractor must start work within 14 days of the Notice to Proceed, and final payment is subject to Net 30 terms upon the submission of certified payroll records, a completed SF 1413, and a release of liens.
Atterbury Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 11 days
NAICS: 562910
New
SLED
MPE Three Classroom Mold Abatement - Rooms 22, 23, 24
Solicitation # 01 (2026-2027)
The Montebello Unified School District is soliciting bids under RFQ No. 01 (2026-2027) for mold abatement services in three classrooms, specifically Rooms 22, 23, and 24 at MPE in Montebello, California. The scope of work includes the abatement process, cleaning of A/C systems, and the movement of furniture before and after the project. Contractors must utilize containment, three-stage decors, and negative air pressure, while maintaining CAL/OSHA safety standards and good housekeeping. All work will be monitored by a third-party consultant, and the contractor is responsible for any necessary re-cleaning if good clearances are not achieved. Regulated disposal must be accompanied by a manifest, and proper mold signage and yellow caution flagging are required on-site. Bids must be submitted by November 2, 2026, at 9:00 a.m. via the designated secure portal. The contract will be awarded to the best value bidder based on price, proven ability to comply with specifications, capability, and credibility, with a preference for local firms in the event of equal low bids. Requirements for submission include a Non-Collusion Affidavit and a Certificate of Workers' Compensation Insurance. The successful vendor must provide a minimum one-year warranty and maintain comprehensive insurance naming the District as an additional insured. Payment is due 30 days after the receipt of a correct invoice or acceptance of goods. The District reserves the right to terminate the agreement with 30 days' written notice or immediately upon failure to perform.
Montebello Unified School District

POSTED

about 13 hours ago

DEADLINE

in 5 days

AI Contract Overview

Show more

The US Army Engineer District Walla Walla is planning a competitive acquisition for a firm-fixed price contract to remove heavy metals based paint, scale, and rust from various metal surfaces at the McNary Lock and Dam. The scope of work includes five Oregon Fish Ladder Rotovalves, six Rotovalve Long Elbows, four Fish Pumphouse Stoplog Guide Slot Covers, and eight Navigation Lock Tainter Valve Bulkheads. Due to the nature of the materials, all removal activities must strictly adhere to safety standards 29 CFR 1910.1025 and 29 CFR 1926.62. This opportunity is scheduled as a 100 percent Small Business set-aside. Interested offerors must be registered in the System for Award Management to be eligible for an award. While the formal solicitation will provide definitive technical specifications and deadlines, quotes are expected to be due approximately 15 days after the solicitation is released. All updates and official documents will be managed electronically via the government's procurement portal.

General Info

Contract Value

$61,775

NAICS

562910 - Remediation Services

Place of Performance

WA, USA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseAwarded
Posted

Presolicitation

Notice updated

Response deadline changed from Jul 24, 2014 to Jul 28, 2014. The notice description changed.

Type Changed

Presolicitation → Solicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → US Army Engineer District Walla Wal
ContactsNo contacts available
OfficeWALLA WALLA, WA, 99362-1876, USA
Office AddressWALLA WALLA, WA, 99362-1876, USA
ContactsNo contact information available

Full Description

Show more
This synopsis is not a request for quotes or proposals. This is a notice that a solicitation for a competitive acquisition for the award of one firm-fixed price contract is scheduled to be released via FedBizOpps (www.fbo.gov) in the near future. The Technical Specifications will be detailed in the solicitation. This announcement is for information and planning purposes only and is not to be construed as a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. Quotes will be due approximately 15 days from the date the solicitation is issued, however, the 15 day time frame is an estimate and subject to change. The definitive quote due date and time will be stated in the solicitation and any associated amendments that may be issued. No CD's or hard copies will be available. Offerors are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the document posted at the referenced website. Summary of Work: The purpose of this contract is remove all paint, scale, and rust from the metal surfaces of Five (5) Oregon Fish Ladder Rotovalves, Six (6) Oregon Fish Ladder Rotovalve Long Elbows, Four (4) Fish Pumphouse Stoplog Guide Slot Covers, and Eight (8) Navigation Lock Tainter Valve Bulkheads. Paint and scale being removed is considered to be heavy metals based with levels above the permissible exposure limits. All paint removal shall conform to 29 CFR 1910.1025 and 29 CFR 1926.62. Site Visit: A site visit is planned for 22 July 2014 at the McNary Lock and Dam. There will be only one site visit offered. Set-aside status: The solicitation is scheduled to be issued 100% Small Business. Conducting Business with the Government: In order for contractors to conduct business with the Department of Defense, the contractor must provide registration information to the System for Award Management (SAM). All Offerors must be SAM registered prior to receiving an award. Registration instructions may be obtained, and online registration may be accomplished, at www.sam.gov. By submission of a quote, a vendor acknowledges the requirement to be registered in the SAM database prior to award, during performance, and through final payment of any contract resulting from the solicitation. If you are not SAM registered, you will need to complete and provide paragraphs (B) through (I) of provision 52.212-3 Alt. I in the solicitation. Contracting Office Address: USACE District, Walla Walla, 201 N. Third Avenue, Walla Walla, WA 99362-1876 Point of Contact(s): Hillary Morgan contact@example.gov

More opportunities from Department Of Defense → US Army Engineer District Walla Wal

Same awarding agency

NAICS: 332812
New
Federal
Dworshak Skeleton Bay Draft Tube Bulkhead Rehabilitation
Solicitation # W912EF27QA0020001
The US Army Corps of Engineers, Walla Walla District, is soliciting offers for the rehabilitation of twelve draft tube bulkheads and associated seal keeper bars at the Dworshak Dam. This small business set-aside project requires the contractor to provide all personnel, materials, equipment, and transportation to move the bulkheads from Dworshak Dam to a repair facility and back. The scope of work includes existing coating removal, weld inspection and repair according to AWS D1./D1.M standards, and the application of new coatings in compliance with SSPC SP 5/NACE No. 1 and Section 09 97 02.00 28 for hydraulic structures. The government provides the bulkheads as government furnished property, with each unit having an estimated value of 850,000 dollars. The project is structured in three phases, with each phase involving two top and two bottom bulkheads. Performance is scheduled between November 23, 2026, and July 5, 2027, with specific pickup and return windows for each phase. Deliveries and retrievals must be coordinated 15 days in advance and occur Monday through Thursday. Key requirements include a one-year warranty on the coating system, the submission of general inspection reports within five business days of each inspection, and the provision of manufacturer safety data sheets and CERL Lab certification for all paint materials. The contractor must also ensure all paint is stored and packaged according to strict safety and stability guidelines to prevent degradation.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 811310
New
Federal
LLA Fish Pump - Motor Rewind
Solicitation # W912EF27QA006
Solicitation W912EF27QA006 is a combined synopsis and request for quotation issued by the US Army Engineer District Walla Walla for motor rewind and asbestos abatement services at the Lower Granite Dam in Pomeroy, Washington. The scope of work involves the rewinding, refurbishing, and addition of eight resistance temperature detectors to three polyphase AC squirrel cage induction motors used for fish pumps. This includes one Hitachi dual winding motor and two Ideal Electric single-winding motors. To ensure operational continuity, the project will be executed by rewinding one motor per year, with a total performance period extending through December 2029. The contract is a firm-fixed-price acquisition and is not set aside for small business concerns, although evaluation preferences are provided for HUBZone small businesses. Key technical requirements include the use of a minimum class F motor insulation system and strict adherence to core loss and hot spot specifications. Deliverables include the refurbished motors, final operation and maintenance manuals, and on-site commissioning support. The government has established a seven-business-day window for the acceptance or rejection of services following delivery. Liquidated damages are specified for delays, with daily rates increasing annually from FY28 through FY30. Offerors must comply with various federal regulations, including the Buy American and Balance of Payments Program, E-Verify personnel screening, and DFARS cybersecurity reporting standards.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

7 days ago

DEADLINE

in 26 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS