Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) & Inspection Services

Active

Federal

Response Deadline10/30/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Non-Destructive Testing and Inspection Services supports prime contractors on US Army Corps of Engineers projects located at Dworshak Dam. The scope of work involves performing 100 percent inspection of welds and coatings, specifically utilizing Visual Testing and Magnetic Particle Testing for welds alongside coating thickness inspections. The contractor is required to provide digital Weld and Coating Inspection Reports for every bulkhead. To qualify, personnel must hold AWS CWI, ASNT CP-189 NDT Level II, and AMPP/NACE CIP Level 2 certifications. This opportunity is designated as a total Small Business Set Aside under NAICS code 541380 and is managed through the US Army Engineer District Walla Walla within the Department of Defense.

General Info

NDT inspection services for Dworshak Dam welds and coatings, requiring specific professional certifications.

Agency

Department Of Defense → US Army Engineer District Walla Wal

NAICS

541380 - Testing Laboratories and Services

Place of Performance

WA

Set-Aside

SBA

Documents

This scope was carved out of W912EF27QA0020001.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Dworshak Skeleton Bay Draft Tube Bulkhead Rehabilitation

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 23

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 09:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → US Army Engineer District Walla Wal

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → US Army Engineer District Walla Wal

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs 100% inspection of welds and coatings for prime contractors on US Army Corps of Engineers projects at Dworshak Dam. Conducts Visual Testing (VT) and Magnetic Particle Testing (MT) of welds and coating thickness inspections. Requires AWS CWI, ASNT CP-189 NDT Level II, and AMPP/NACE CIP Level 2 certifications. Delivers digital Weld and Coating Inspection Reports for each bulkhead.

Similar Contracts

Same NAICS industry code

TEAD - Helium Inspection Services

Solicitation # PANROC26P0000036026

Solicitation PANROC26P0000036026 is a 100% Small Business Set Aside for certified Non-Destructive Testing (NDT) services to perform helium leak inspections on newly fabricated one-metric ton mercury containers. The work is part of the Strategic Mercury Ton Container Assembly and Testing project and will be performed on-site at Building 519 of the Tooele Army Depot in Tooele, Utah. Per Amendment 0001, the requirement consists of 100 standard inspections and a variable retesting CLIN for 10 units. The period of performance is one year, specifically requested from January 1, 2027, to December 31, 2027. This is a Firm Fixed Price commercial order to be awarded to the responsible quoter submitting the lowest total evaluated price conforming to specifications. Technical and past performance factors will not be evaluated. Quotes are due by October 28, 2026, and must include a completed Pricing Matrix. The contractor is responsible for providing all personnel, equipment, and travel, and must ensure all containers are certified as structurally sound and airtight. Payment will be processed electronically via the Wide Area WorkFlow system.

POSTED

about 2 hours ago

DEADLINE

Quality Testing Laboratory – First Article Test (FAT)This subcontract involves providing Quality Testing Laboratory services to perform First Article Testing for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The primary objective is to validate manufacturing processes by verifying material properties and dimensions against Reference Drawing NR 81755 C2989, Revision H. All measurements must be conducted using CMM, calipers, and micrometers calibrated to national standards, and the performing entity must maintain ISO/IEC 17025 certification. The scope of work requires the delivery of a certified sample part and a formal First Article Test Report. Performance will take place at Hill AFB, and the project falls under NAICS code 541380. Interested parties should note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

First Article Test (FAT) ExecutionThis subcontract, titled First Article Test Execution, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The primary objective is to perform First Article Testing for prime contractors to verify that NSN 6605-01-607-1996 complies with Section C quality standards. The scope of work involves conducting technical testing on the first unit using laboratory equipment or specialized testing rigs, documenting all findings, and delivering a certified first article unit along with a formal FAT Report. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the posted date of October 25, 2026, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Specialized Materials Testing LaboratoryThis subcontract opportunity for the Specialized Materials Testing Laboratory supports the DLA Weapons Support Land Supply Chain by providing critical validation testing for prime contractors. The scope of work involves conducting Government Production Lot Testing and managing the delivery of random samples to the Naval Undersea Warfare Center in Keyport, Washington. To ensure compliance, the contractor must utilize specialized laboratory equipment to validate materials against MIL-DTL-117 and ISO 3601-3 standards and maintain the necessary accreditation for naval undersea warfare components. The project requires the delivery of comprehensive test reports and formal validation certifications. Performance will take place in Tracy, California, under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services supports prime contractors on DLA Troop Support material contracts through specialized quality conformance testing. The scope of work involves conducting Production Lot Testing to validate ASTM D2000 rubber specifications, utilizing sampling methods in accordance with MIL-STD-1916 or ASQ H1331. The selected provider will use laboratory equipment to assign verification levels for minor, major, and critical attributes, culminating in the delivery of an approved Production Lot Test Report. Managed by the Department of Defense under DLA DIST SAN JOAQUIN, the performance of this contract is located in Tracy, California. The opportunity falls under NAICS code 541380, with a response deadline set for November 5, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

First Article Testing (FAT) and CertificationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the performance of First Article Testing and Certification for self-locking clinch nuts. The selected contractor will conduct physical and mechanical evaluations on first production units to verify material integrity, dimensions, and locking mechanisms using specialized metrology equipment, hardness testers, and torque/tension rigs. All work must be performed against limited rights data and requires the provider to hold AS9100 or ISO 9001 certification. The scope of work culminates in the delivery of a First Article Test Report and a Certification of Compliance. Performance will take place at Tinker AFB, and the opportunity falls under NAICS code 541380. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Precision Measurement and Testing ServicesThe Precision Measurement and Testing Services subcontract involves the measuring and testing of drive tube assemblies for prime contractors under DLA supply contracts. The selected provider must execute specific test protocols defined in RT001 to verify material integrity and dimensional tolerances using calibrated equipment. Final deliverables include validated components and certified test reports. This effort is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with performance located at Hill AFB. To be eligible, contractors must maintain CMMC Level 2 and DFARS 252.204-7012 compliance. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Critical Application Item Inspection & TestingThis subcontract, titled Critical Application Item Inspection and Testing, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will perform independent quality assurance and inspection services for prime contractors fulfilling DLA supply contracts, with the primary place of performance located at Tinker AFB. The scope of work involves executing sampling plans according to MIL-STD-1916 or ASQ H1331, specifically utilizing zero-based sampling for critical application items. Key technical requirements include validating impeller dimensions against Honeywell specifications using precision measurement tools and delivering comprehensive inspection reports and certifications of conformance.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Production Lot Testing and Quality AssuranceThis subcontract for Production Lot Testing and Quality Assurance supports prime contractors on DLA Weapons Support Maritime Supply Chain projects. The scope of work involves executing performance verification for generators using electrical diagnostic tools and load banks to ensure output stability, while coordinating all mandatory government testing in accordance with Procurement Note E04. The final deliverables include validated samples and certified test reports. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the requirement for technical data access, the contractor must hold CMMC Level 2 and US/Canada Joint Certification Program certifications. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test (PLT) Services involves performing validation testing on power cable assemblies for prime contractors under DLA supply contracts. The selected provider will execute PLT using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, utilizing specialized electrical testing and validation equipment to ensure all assemblies meet strict government standards. A final test report and certification for each production lot are required deliverables. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract requires the provider to maintain ISO 9001:2015 quality system compliance. The work is designated under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports prime contractors on DLA supply contracts through the Department of Defense. The scope of work involves the testing and validation of three units of item 5340/12506036, utilizing aerospace-grade testing rigs and measurement equipment. All sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331 standards, and the final deliverables include three tested units and a completed First Article Test Report. The project will be performed in New Cumberland, Pennsylvania, under NAICS code 541380. Due to the handling of controlled technical data, the contractor is required to maintain CMMC Level 2 certification. Interested parties must respond by November 5, 2026, to the DLA Weapons Support Land Supply Chain agency.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

First Article Test (FAT) for Connector ReceptaclesThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the performance of First Article Testing for connector receptacles associated with NSN 5935011710645. The selected contractor will conduct rigorous testing on initial production samples to ensure full compliance with the technical data package, specifically utilizing laboratory equipment to verify conductivity, fit, and durability. The primary deliverables for this engagement are a comprehensive FAT Report and a formal certification of compliance. The work is categorized under NAICS code 541380 and will be performed in Sioux Falls, South Dakota. Interested parties must adhere to the timeline established by the posting date of October 25, 2026, with a response deadline of November 2, 2026. This effort supports prime contractors in meeting the strict quality and technical standards required for Defense Logistics Agency supply contracts.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → US Army Engineer District Walla Wal

Same awarding agency

Specialized Heavy Haul TransportationThis specialized heavy haul transportation subcontract, issued by the US Army Engineer District Walla Walla under the Department of Defense, involves the transport of twelve oversized draft tube bulkheads. The selected contractor will be responsible for hauling these components from Dworshak Dam to a repair facility and back, utilizing heavy-haul trailers and professional rigging to ensure no damage occurs to structural members or new coatings. The project is designated as a total Small Business Set Aside under NAICS code 484220. The contractor must maintain full DOT compliance for oversized loads to ensure the safe delivery and return of the bulkheads. The solicitation was posted on October 23, 2026, with a response deadline of October 30, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Structural Welding & RepairThis subcontract involves performing structural weld repairs on twelve draft tube bulkheads and seal keeper bars at Dworshak Dam for prime contractors working on US Army Corps of Engineers projects. All work must be executed by certified Welders and Welding Operators using compatible electrodes and filler wire to ensure compliance with AWS D1.1/D1.M standards. Managed under the US Army Engineer District Walla Walla within the Department of Defense, this opportunity is designated as a total Small Business Set Aside under NAICS code 238110. The solicitation was posted on October 23, 2026, with a response deadline of October 30, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Industrial Coating & Surface PreparationThis small business set-aside subcontract involves industrial coating and surface preparation for US Army Corps of Engineers projects at Dworshak Dam. The scope of work requires the removal of existing coatings via sweep blasting according to SSPC SP7 standards and the application of a new protective system consisting of a zinc-rich primer and a final coat with a minimum 7.0 mils dry film thickness. All applications must be performed using spray equipment and verified with magnetic flux thickness gages per ASTM D7091. The project culminates in the delivery of twelve bulkheads with fully inspected coating systems. To qualify for this work, the contractor must hold a Qualified Coating Applicator certification. This opportunity is managed under the Department of Defense through the US Army Engineer District Walla Walla.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Dworshak Skeleton Bay Draft Tube Bulkhead Rehabilitation

Solicitation # W912EF27QA0020001

The US Army Corps of Engineers, Walla Walla District, is soliciting bids for the rehabilitation of twelve draft tube bulkheads and associated seal keeper bars at Dworshak Dam. This total small business set-aside project, under solicitation W912EF27QA0020001, requires the contractor to provide all personnel, materials, and equipment necessary to transport the bulkheads from the dam to their repair facility and return them upon completion. The scope of work includes the removal of existing coatings, performing weld repairs, and applying new coatings. The project is divided into phases with specific pickup and return windows occurring between November 2026 and July 2027. All transportation must be coordinated with the Contracting Officer at least 15 calendar days in advance and conducted Monday through Thursday during specified hours. Technical requirements are stringent, requiring 100 percent inspection of all welds using Visual Testing and Magnetic Particle Testing in accordance with AWS D1./D1.M. Coating applications must meet specific dry film thickness standards, with a minimum average of 7.0 mils for the completed system. The contractor must provide a third-party certified coatings inspector and ensure all paint materials are certified by the CERL Lab. To be considered technically acceptable, bidders must submit specific pre-award documentation, including SSPC QP 3 or AISC Complex Coating Endorsements, paint product datasheets for System 5-E-Z, manufacturer warranties, and qualifications for both weld inspectors and welding operators. Government representatives will conduct internal inspections at the contractor's facility following the removal of existing coatings.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Heavy Equipment Transport (Motors)This subcontract opportunity is for the provision of heavy haul transportation services for large industrial motors supporting prime contractors on US Army Engineer District Walla Walla District projects. The scope of work involves developing comprehensive transportation plans and executing the loading, securing, and hauling of oversized motors between the Lower Granite Dam and designated rewind shops. The selected contractor must utilize heavy-duty flatbeds and specialized rigging equipment to ensure the safe delivery of these components to and from the facility. The project is categorized under NAICS code 484220 and is managed by the Department of Defense. Performance of the contract will take place in Pomeroy, Washington. Interested parties should note that the response deadline for this opportunity is November 23, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Industrial Motor Coating and PaintingThis subcontract opportunity involves providing industrial coating and painting services for refurbished motors supporting prime contractors on US Army Engineer District Walla Walla projects. The scope of work includes performing surface preparation on motor housings, applying industrial-grade paint, and ensuring the safe removal of RCRA metal-based paints in strict compliance with Resource Conservation and Recovery Act standards. The project will be performed in Pomeroy, Washington, under NAICS code 238210. Interested parties must submit their responses by November 23, 2026, to support the Department of Defense in delivering fully painted and coated motor housings.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Industrial Asbestos Abatement (Motor Components)This subcontract for Industrial Asbestos Abatement focuses on the testing and removal of asbestos-containing materials from motor leads and windings for prime contractors working on US Army Engineer District Walla Walla projects. The scope of work involves ensuring motor components are safe for rewind operations by utilizing HEPA vacuum systems and containment barriers in strict accordance with EPA and OSHA standards to deliver certified asbestos-free components. The project is categorized under NAICS code 238210 and will be performed in Pomeroy, Washington. Interested parties should note the response deadline of November 23, 2026, for this Department of Defense requirement.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Heavy Industrial Motor Rewind and RefurbishmentThis subcontract involves the heavy industrial rewind and refurbishment of three 4160V polyphase AC squirrel cage induction motors supporting prime contractors for the US Army Engineer District Walla Walla. The scope of work includes stator burnout, core loss testing, and the implementation of Class F insulation systems. Technical requirements specify the installation of eight RTDs per phase, as well as comprehensive rotor balancing and load run temperature rise tests to ensure operational integrity. The project is managed under the Department of Defense with performance taking place in Pomeroy, Washington. The contractor is responsible for the delivery of three fully refurbished and tested motors. Interested parties should note the response deadline of November 23, 2026, for this specialized electrical refurbishment effort.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

LLA Fish Pump - Motor Rewind

Solicitation # W912EF27QA006

Solicitation W912EF27QA006 is a combined synopsis and request for quotation issued by the US Army Engineer District Walla Walla for motor rewind and asbestos abatement services at the Lower Granite Dam in Pomeroy, Washington. The scope of work involves the rewinding, refurbishing, and addition of eight resistance temperature detectors to three polyphase AC squirrel cage induction motors used for fish pumps. This includes one Hitachi dual winding motor and two Ideal Electric single-winding motors. To ensure operational continuity, the project will be executed by rewinding one motor per year, with a total performance period extending through December 2029. The contract is a firm-fixed-price acquisition and is not set aside for small business concerns, although evaluation preferences are provided for HUBZone small businesses. Key technical requirements include the use of a minimum class F motor insulation system and strict adherence to core loss and hot spot specifications. Deliverables include the refurbished motors, final operation and maintenance manuals, and on-site commissioning support. The government has established a seven-business-day window for the acceptance or rejection of services following delivery. Liquidated damages are specified for delays, with daily rates increasing annually from FY28 through FY30. Offerors must comply with various federal regulations, including the Buy American and Balance of Payments Program, E-Verify personnel screening, and DFARS cybersecurity reporting standards.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Industrial Paint and Abrasive Media SupplyThis subcontract opportunity, issued by the US Army Engineer District Walla Walla under the Department of Defense, seeks a provider for industrial paints, coatings, and abrasive blasting media. The selected vendor will supply materials to prime contractors for rehabilitation projects, ensuring that all coatings adhere to SAE AMS-STD-595A standards and that abrasive media is angular and non-steel shot. To maintain quality control, the contractor must provide all necessary material certifications and manufacturer batch numbers upon delivery to the project site. This procurement is designated as a total set-aside for small businesses under NAICS code 423510. Interested parties must submit their responses by October 30, 2026. The contract focuses on the reliable delivery of specified quantities of industrial materials to support critical infrastructure rehabilitation efforts within the Walla Walla District.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

Bulkhead Transportation and LogisticsThe Bulkhead Transportation and Logistics subcontract, issued by the US Army Engineer District Walla Walla, requires the provision of heavy haul transportation services for prime contractors. The scope of work involves the transport of 12 industrial bulkheads from Dworshak Dam to a designated rehabilitation facility and their subsequent return by specified deadlines. To ensure the safe delivery of these oversize loads, the contractor must utilize heavy-duty flatbed trucks or specialized trailers and provide a detailed transportation plan in full compliance with DOT regulations. This opportunity is designated as a total Small Business Set Aside under NAICS code 484220. Interested parties must submit their responses by October 30, 2026. The primary objective of the contract is the secure and timely logistics management of critical infrastructure components for the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Bulkhead Structural Weld RepairsThis small business set-aside subcontract involves performing structural weld repairs and inspections for prime contractors on US Army Engineer District Walla Walla District projects. The scope of work focuses on executing weld repairs on seal keeper bars and draft tube bulkheads to meet structural steel standards, utilizing compatible consumables and welding machinery to deliver certified, structurally sound results. Qualified contractors must provide welders certified to AWS D1.1/D1.1M Structural Welding Code - Steel as well as Certified Weld Inspectors. This opportunity falls under NAICS code 238120 and is managed by the Department of Defense, with a response deadline set for October 30, 2026.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS