Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

J041--Controls Preventive Maintenance

Open
36C24127Q0079Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Veterans Affairs intends to enter into a sole source, firm-fixed-price procurement with Trane U.S. Inc. to provide preventive maintenance and technical support for Trane Building Control Units at the VA Medical Center in West Roxbury, MA. The scope of work includes basic intelligent services, software updates, licensing, and controls verification for a specific inventory of Tracer SC and Tracer SC+ units. Key services include loop tuning, sequence of operation verification, sensor calibration, and system analysis. The period of performance consists of one base year and two option years, with all routine work performed between 7:30 a.m. and 4:00 p.m. The contractor is required to submit an annual maintenance schedule within 14 days of the notice to proceed and provide detailed written service reports within 10 days of each inspection. Personnel must have a minimum of three years of recent experience and authenticated factory training certificates. The contractor must also maintain a quality control program and provide proof of general and property damage liability insurance of at least $500,000 per occurrence. This requirement is designated as a sole source procurement because the Trane Ensemble system is proprietary, requiring manufacturer-specific access for software, firmware, and configuration support.

General Info

Trane U.S. Inc. will provide maintenance for building control units at VA West Roxbury.

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

ME

Set-Aside

NONE

Documents

1
DOCX, High priority: read this first10 pages · rfq
High

Read the document

Due in 6 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 6 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)
Contacts1 person available
OfficeTOGUS, ME, 04330, USA

Full Description

Show more
The Department of Veterans Affairs, Networking Contracting Office (NCO 01) located in Brockton, MA intends to enter into a sole source procurement, pursuant to the authority of FAR 6.302-1, with TRANE U.S. Inc., for the following requirement: STATEMENT OF WORK SCOPE OF WORK The Contractor shall provide all supervision, personnel, material, parts, equipment, supplies, labor and transportation in performing basic intelligent services on the Trane Building Control Units located at the Department of Veterans Affairs Medical Center, 1400 VFW Parkway, West Roxbury, MA 02132 in accordance with all terms and conditions of this contract. Period of Performance: one base year plus two option years. DEFINITIONS/ACRONYMS A. Contract Discrepancy Report (CDR) : A report that the Government shall complete and issue to the Contractor when service is unsatisfactory and not in compliance with the terms and conditions of the contract. The Contractor is required to complete and return this form to the COR whenever performance is unsatisfactory. The CDR requires the Contractor to explain, in writing, the cause of the unsatisfactory performance, how performance will be returned to acceptable standards, and how reoccurrence of the problem will be prevented in the future.
B. Contracting Officer (CO) : The individual with the authority to enter into, administer, and/or terminate contracts. The CO is the exclusive Government official authorized to execute changes and deviations or variations in the contract. C. Contracting Officer's Technical Representative (COTR) : A Government representative, designated in writing by the Contracting Officer, to be responsible for quality assurance, inspection, surveillance, documentation and acceptance of the Contractor's performance. A copy of the letter of designation will be provided to the Contractor.
D. Preventive Maintenance (PM) : Services which are periodic in nature and are required to maintain the equipment in such condition that it may be operated in accordance with its intended design and functional capacity with minimal incidence of malfunction or inoperative conditions. To clean, lubricate, calibrate, test and replace faulty or worn parts and/or parts which are likely to become faulty, fail or become worn, repair or adjust components, or assemblies of components as necessitated by wear, tear, damage, or failure of parts, returning the equipment and/or instrument to the operating condition defined in the manufacturer s specifications. E. Repair Cost Estimate: The Contractors estimated cost (for parts, labor and freight ) to repair a system according to manufactures' specifications and requirements. F. Time: When hours are given it shall mean clock hours exclusive of Saturdays, Sundays and Holidays unless otherwise specified (i.e., 1:00 P.M. Monday to 1:00 P.M. Tuesday equals 24 hours; 12:00 P.M. Friday to 12:00 P.M. Monday equals 24 hours). If days are indicated it shall mean calendar days including Saturdays, Sundays and Holidays. G.Rework. Any work the Contractor is required to accomplish due to unsatisfactory performance or nonperformance in accordance with the stated quality and level of effort specified in the contract. Rework is performed at no additional cost to the Government.
H. ESR. Vendor Engineering Service Report. A documentation of services rendered for each incidence of work performance under the terms and conditions of the contract. I. Acronyms. Commonly used acronyms are listed below FSE: Field Service Engineer AQL: Acceptable Quality Level IAW: In Accordance With QA: Quality Assurance QC: Quality Control WS: Performance Work Statement VA: VA Medical Center CO: Contracting Officer COTR: Contracting Officer s Technical Representative FES: Facilities and Engineering Service PREVENTIVE MAINTENANCE REQUIREMENTS
Within 14 calendar days of Notice to Proceed, the vendor will submit to the COTR a written schedule of the planned PM visits for the coming year along with a written description of the work to be performed during each visit. Refer to paragraph IV.B. below for schedule and inspection requirements.
Each inspection will be provided in accordance with the system/equipment manufacturers factory recommended procedures. Each inspection shall, at a minimum, include the following as specified for the equipment make, type, and time of seasonal operation. Any additional parts not identified in this document will not be covered by this contract. The vendor will obtain prior approval from the COTR prior to performing any additional repair work and the additional work will be billed separately.
For each PM inspection, the contractor will provide a detailed written report to the COTR that summarizes work performed, problems/deficiencies found, and measurements taken. This report will be submitted within 10 calendar days of the date of PM inspection.
All work will be performed between the hours of 7:30 a.m. and 4:00 p.m. on the prearranged dates.
The contractor shall perform preventive maintenance and technical support services on the equipment identified in the contract's covered equipment schedule in accordance with manufacturer-recommended procedures and the service activities specifically identified in the Statement of Work. Within 14 calendar days of Notice to Proceed, the contractor shall submit a proposed annual maintenance schedule identifying the covered equipment, planned service activities, service frequency, and anticipated dates of performance. The minimum required service frequencies and quantities shall be established in the contract prior to award. Upon completion of each scheduled maintenance activity, the contractor shall provide a written service report documenting the equipment serviced, inspections and tests performed, software or programming adjustments completed, deficiencies identified, and recommendations for corrective action. Routine preventive maintenance, software updates, licensing services, and controls verification specifically identified in the contract shall be included in the established Firm-Fixed-Price. Corrective repairs, equipment replacement, emergency service, and other work not expressly included in the contract shall require separate authorization by the Contracting Officer before performance. The COR may coordinate and review proposed corrective work but does not have authority to obligate additional Government funds or direct out-of-scope services. All inspection work must be coordinated through the COTR
The following is the scope of services to be performed on Covered Equipment.
Equipment Maintenance Procedures:
The following "Covered Equipment" will be serviced at VA Medical Center W Roxbury: Equipment Qty Manufacturer Model Number Serial Number Asset Tag Tracer SC+ 1 Trane X136516950 E20M13318 SC-1 Tracer SC+ 1 Trane X136516950 E22B22087 SC-2 Tracer SC+ 1 Trane X136516950 E22B22088 SC-3 Tracer SC+ 1 Trane X136516950 E22A00251 SC-4 Tracer SC+ 1 Trane X136516950 E23F18569 SC-5 Tracer SC+ 1 Trane X136516950 E22A00814 SC-7 Tracer SC+ 1 Trane X136516950 E21M06737 SC-8 Tracer SC+ 1 Trane X136516950 E22A00815 SC-9 Tracer SC+ 1 Trane X136516950 E22A00242 SC-10 Tracer SC+ 1 Trane X136516950 E22A00241 SC-11 Tracer SC+ 1 Trane X136516950 E22A00827 SC-12 Tracer SC+ 1 Trane X136516950 E22A00837 SC-13 Tracer SC+ 1 Trane X136516950 E22A00835 SC-14 Tracer SC+ 1 Trane X136516950 E22A00252 SC-15 Tracer SC+ 1 Trane X136516950 E22A00836 SC-16 Tracer SC 1 Trane X136516950 E14L83619 SC-18 Tracer SC 1 Trane X136516950 E15B81289 SC-19 Tracer SC+ 1 Trane X136516950 E23L10270 SC-20 Tracer SC 1 Trane X136516950 E16K91711 SC-21 Tracer SC 1 Trane X136516950 E16F88171 SC-22 Tracer SC+ 1 Trane X136516950 E20E01214 SC-23 Tracer SC 1 Trane X136516950 E17F91510 SC-24 Tracer SC+ 1 Trane X136516950 E24M68068 SC-25 Tracer SC+ 1 Trane X136516950 E21H01208 SC-26 Tracer SC+ 1 Trane X136516950 E23F18570 SC-27 Tracer SC+ 1 Trane X136516950 E23F18580 SC-28 Tracer SC+ 1 Trane X136516950 E23F18581 SC-29 Tracer SC+ 1 Trane X136516950 E23F18574 SC-30 Tracer SC+ 1 Trane X136516950 E23F18578 SC-31 Tracer SC+ 1 Trane X136516950 E23F18577 SC-32 Tracer SC+ 1 Trane X136516950 E23F18582 SC-33 Tracer SC+ 1 Trane X136516950 E23F18579 SC-34 Tracer SC+ 1 Trane X136516950 E23F18573 SC-35
The following Customer Service Flows provide additional service description detail for Covered Equipment. Note: There may be differences per the agreement in the work being performed between sites and the equipment on those sites. This section clarifies differences in the work being performed between sites and the equipment on those sites:
Service 1: AHU Controls Support Description Loop Tuning Sequence of Operation Verification
Service 2: Chilled Water System Controls Support Description Loop Tuning Sequence of Operation Verification
Service 3: Condenser Water System Controls Support Description Loop Tuning Sequence of Operation Verification
Service 4: Hot Water System Controls Support Description Loop Tuning Sequence of Operation Verification
Service 5: Miscellaneous I/O Support Description Sequence of Operation Verification
Service 6: RTU Controls Support Description Loop Tuning Sequence of Operation Verification for
Service 7: Software Updates Description Update SC+ SMP License Firmware Update On-Site Ensemble Software Updates Update Ensemble Cloud Subscription
Loop tuning Develop/review list of associated points and associated control loops Review Set point is at appropriate value for application Test control loop by modifying set point and confirming algorithm responds at appropriate speed of response and stability Document Changes
Sequence of operation verification Review sequence of operations for system according to associated documentation Connect to systems controller and confirm baseline programs are functioning Review and document any manual overrides, discuss with operator, and attempt to release override and enable operation as appropriate. Review and document failed sensors and communications errors Review system schedule with system operator, make changes as appropriate. Document changes.
Service 8: Sensor Calibation Description Calibrate Temperature Sensors Calibrate Air Differential Pressure Sensors Calibrate Humidity Sensors Calibrate Duct Sensors Calibrate Airflow Stations
Service 9: System Analysis and Review Description Oparator Workstation Inspection System Controller Inpection Verify Software System Programming System Backup Customer Review 30 Minutes Software Service Pack Update
Service 10: System VAV Front-End Analysis Description VAV Front-End Analysis
$ EMERGENCY SERVICE Emergency repair service is not covered by the contract. However, the contractor will provide a preferred customer response to emergency repair calls that includes labor and parts costs to be billed separately. CONTRACTOR PERSONNEL A. Personnel Experience. All work shall be performed by competent mechanics, experienced and qualified to work on the specific makes and models of equipment listed in this contract. The Contractor shall submit to and for the approval of the Contracting Officer, certification and a list of credentials of the approved mechanics. Personnel shall have a minimum of three (3) years recent experience related to this work. The contractor must provide a list of three (3) reference contacts that have been provided service on similar or identical equipment. The contractor must provide authenticated factory training certificates or credentials (or acceptable substitute as approved by the COTR) for any personnel who are working on any VA equipment. The VA specifically reserves the right to reject any of the contractor s personnel and refuse them permission to work on VA equipment. B. Conduct of Personnel. The Contractor shall ensure that his personnel present a professional appearance at all times and that their conduct shall not reflect discredit upon this facility or the Department of Veterans Affairs. The Contractor shall remove from the job site any employee for reasons of misconduct or security. The removal from the job site of such a person shall not relieve the Contractor of the requirement to provide sufficient personnel to perform adequate and timely service. All employees shall be legal residents of the United States and be able to understand, speak, read and write the English language. C. Identification of Employees. : The Contractor shall within 10 calendar days before beginning performance of work provide the Contracting Officer a list of all employees who will perform under this contract. The list shall include the full name, and work assignment of each employee. The Contractor shall notify the Contracting Officer in writing of any addition, deletion or change in work assignment within 10 days of such change. Each of the Contractor's employees shall conspicuously display on their person a badge provided by the VA West Roxbury Police Office. HOURS OF OPERATION
A. Normal Duty Hours. The Contractor shall have employees available Monday through Friday, except legal public holidays at the times specified to perform routine work and inspections.
B. Federal Holidays. Federal Holidays observed by the VA are: New Years Day; Martin Luther King Day; President s Day; Memorial Day; Independence Day; Labor Day; Columbus Day; Veterans Day; Thanksgiving Day; and Christmas. CONTRACTOR QUALITY CONTROL The Contractor shall establish and maintain a Quality Control Program that ensures that all requirements of the contract are provided as specified. INSPECTION AND ACCEPTANCE
A. Final inspection and acceptance by the Government shall be made at the site of each system. However, final inspection and acceptance do not preclude the Government's right to inspect completed work prior to shipment from the Contractor's shop nor does it waive any rights of the Government.
B. Unsatisfactory service will be reported in writing by the VA CO to the Contractor. C. Telephone Answering Service: The Contractor shall maintain, at his own expense, a dedicated (tie-line) toll-free telephone answering service for the exclusive use in the performance of this contract. This answering service shall be monitored during normal work hours as identified in the specifications. REMOVAL AND/OR DISPOSAL A. Removing Government-Owned Material: All property removed remains the property of the U.S. Government and shall be returned by the Contractor to a place of storage as designated by the CO or COTR. B. Salvage: Items received by the Contractor that are non-repairable because of condition, or declared unfit for economical rehabilitation by the Contractor, shall be returned to the Government. All salvage remaining in the Contractor's shop shall remain Government property and may be used for repair of any Government-owned equipment when released by the CO. The Contractor shall be required to maintain an account record of inventory upon completion of the maintenance contract. C. Inventories shall not be disposed of by the Contractor without inspection and written approval of the CO. Salvaged parts used in the repair of any government owned equipment shall be treated by the Contractor as Government furnished material and reflected as same on Contractor's invoices when submitted for payment. All salvage in the possession of the Contractor, upon expiration of the contract, will be returned to the Government within thirty (30) days after such expiration. FIRE PREVENTION AND PROTECTION The Contractor shall fully acquaint himself and his personnel with the location of fire equipment before work, take all prudent measures to minimize fire hazards that result from work, complies with all ordering agency fire and safety regulations. ENERGY CONSERVATION
The Contractor is required to comply with all energy conservation regulations and instructions that are applicable to Government-owned facilities including but not limited to thermostat settings. CLEANING UP The Contractor shall clean up after work, leaving each area where work is performed, neat and clean. All containers, trash and debris for which he is responsible shall be removed. HAZARDOUS CONDITIONS During the course of performing work under this contract, should the Contractor find serious or hazardous conditions existing with or in any of the equipment the Contractor shall secure the equipment and immediately notify the COTR.
CLEANLINESS The area immediately around the equipment provided for the Contractor s use shall be kept in a clean and orderly condition. Trash and waste material shall not be permitted to accumulate, but shall be removed by the Contractor s employees. SERVICE MANUALS The VA shall not provide service manuals or service diagnostic software to the contractor. The contractor shall obtain, have on file, and make available to its FSEs all operational and technical documentation, (such as: operational and service manuals, schematics, and parts lists), which are necessary to meet the performance requirements of this contract. The location and listing of the service data manuals, by name, and/or the manuals themselves shall be provided to the CO upon request.
INSURANCE
A. Worker compensation and employer s liability. Contractor and any subcontractor covered under this contract are required to comply with applicable Federal and State Worker s Compensation and occupational disease statutes. B. General Liability. Contractor and any subcontractor covered under this contract are required to have Bodily injury liability insurance coverage written on the comprehensive form of policy of at least $500,000 per occurrence. C. Property Damage Liability. Contractor and any subcontractor covered under this contract are to have Property Damage Liability insurance coverage of at least $500,000. D. Contractor shall provide proof of liability insurance within five (5) days after contract award. SMOKING POLICY Smoking is prohibited inside all buildings except in designated areas.
PRICING SUBMITTAL The annual pricing of the contract should be itemized by the bidders to reflect a cost per unit PM per equipment item covered by contract. VENDOR REQUIREMENTS The contractor must employ mechanics and technicians that are trained in the applicable codes, standards, and manufacturer requirements for maintenance and repair of the Trane and McQuay equipment covered by this contract.
The contractor must have at least 5 years experience satisfactorily performing such maintenance on comparable units, equipment, or systems.
The contractor must have access to OEM (original equipment manufacturer)-manufactured parts and materials required for performance of this work.
The contractor must have sufficient supplies, tools, and equipment to perform all requirements of this contract
The NAICS code for this requirement is 238220. Engineering identifies Trane U.S. Inc. as the necessary single source for the specified, integrated manufacturer-supported BAS service requirement. The existing campus Tracer/SC+ and Ensemble architecture is an established Government investment; this acquisition requires servicing that platform, including manufacturer-specific software updates, programming/configuration support, controller firmware, SC+ license management, Ensemble updates and subscription support, backups, and functional controls verification. These requirements are not met merely by furnishing generic BACnet connectivity, routine instrument calibration, or a different manufacturer's controls platform.
The Trane Ensemble system is proprietary as well as the service of its programming, software, and replacement components relied on Trane-specific access. That rationale continues to be applicable to the installed Trane controls architecture; the current acquisition adds expressly identified software subscriptions, supported updates, and a larger inventory of Trane Tracer SC/SC+ controllers. The Government is not acquiring a substitute BAS or soliciting another controls manufacturer's equipment.
On September 25, 2026, the VA awarded Trane U.S. Inc. Order 36C24126F0113, for the Buildings 1 and 2 LON-to-BACnet controls upgrade. This separately awarded work replaces legacy field-level controls with Trane Tracer S500 controllers and related components, integrates them into the existing Trane SC+ architecture, and includes programming, graphics, functional verification, turnover, and one-year warranty obligations. This ongoing integration increases the importance of consistent supported software, configuration, and diagnostics in the associated maintenance requirement.
The scope of the maintenance order is distinct from the modernization contract: it preserves recurring operations and installed-platform support, while the modernization contract covers conversion, commissioning, and warranty work. Maintaining manufacturer accountability for the installed server-connected Tracer/SC+ platform, current software entitlements, and new field-controller integration avoids divided responsibility during configuration changes, troubleshooting, and restoration of critical clinical mechanical controls.
Engineering's sole-source technical recommendation is therefore Trane U.S. Inc. for the full manufacturer-supported service requirement, based on the documented Trane-specific functions and Trane's demonstrated delivery of the current service and modernization work. The prior award and OEM status are supporting facts.
This notice of intent is not a solicitation nor is it a request for proposal. However, interested parties that believe they can satisfy the requirement must clearly identify their capability to do so in writing by November 25, 2026 at 12 pm EST time. Response should be sent to Issa Shawki at Sign up to see this detail. Information submitted in response to this notice will be used solely to determine whether competitive procedures could be used for this acquisition. A determination not to open this requirement to competition based upon responses to this notice is solely within the discretion of the Government.

Similar Contracts

Same NAICS industry code

NAICS: 238220
New
SLED
Install Pier D High Pressure Air System, NSBREM-724-A
Solicitation # N4425527RB003
The Install Pier D High Pressure Air System project (NSBREM-724-A) is a Design-Build effort located at the Puget Sound Naval Shipyard in Bremerton, Washington. The scope of work involves the design, construction, and commissioning of a permanent high pressure air (HPA) system at Pier D, B724A of Naval Base Kitsap. Key requirements include incorporating the existing HPA cross connection into a system supplied by HPA compressors at the south end of Pier D and providing HPA to shore risers at five specific bollard locations (East #11, #59, #101, and West #47, #59). All new piping must be installed under service grates with all valves located topside. The project is estimated to have a construction magnitude between $1,000,000 and $5,000,000, with a period of performance of 538 calendar days from the date of award. This solicitation is a 100% set-aside for 8(a) businesses located within SBA Region X, which includes Alaska, Idaho, Oregon, and Washington. The basis of award is the proposal determined to be most advantageous to the Government, evaluated based on price only with MACC past performance. The contractor is required to adhere to strict safety and design standards, including EM 385-1-1, UFC requirements, and ASME codes. Security is a primary concern, requiring specific base access badges, background checks, and the integration of cybersecurity for facility-related control systems. Liquidated damages for construction delays are set at $500.00 per calendar day.
Bristol Alliance of Companies

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 238220
New
Springdale JCC –Recreation HVAC Repair or Replacement
Solicitation # springdale-jcc-recreation-hvac-repair-or-replacement
The Career Systems Development Corporation is seeking quotes for the repair or replacement of two failed 25-ton AAON rooftop HVAC units (Model RH-25-2-00-222) at the Springdale Job Corps Center's recreation building in Troutdale, Oregon. Bidders must submit two separate, itemized quotes—one for repair and one for replacement—along with a professional recommendation on the most reasonable approach based on cost, unit age, and parts availability. Replacement quotes must be comprehensive, covering all necessary equipment and services including cranes, curb adapters, roof supports, and temporary facilities. The project requires an Oregon CCB contractor's license and specific warranties: one year for parts and workmanship, and five years for the compressor and thermostats. This solicitation is set aside for Small Business (SB), SBA certified Veteran Owned Small Business (VOSB), SBA certified Service-Disabled Veteran Owned Small Business (SDVOSB), SBA certified Women-Owned Small Business (WOSB), and SBA certified HUBZone Small Business (HUBZone SB). Labor is subject to prevailing wage determinations, with replacement work governed by Davis-Bacon (DBA) WD OR20260100, R.1, and repair work governed by Service Contract Act (SCA) WD 2015-5563, R.28. Quotes must remain valid for 90 days from the closing date, and any quote totaling $100,000 or more will require Payment and Performance bonds upon award. The response deadline is December 11, 2026.
Career Systems Development Corporation

POSTED

about 5 hours ago

DEADLINE

in 21 days
View Details
NAICS: 238220
New
Los Angeles Job Corps- Sprinkler Head Repairs
Solicitation # LA JCC Lobby Sprinkler Repairs
Management & Training Corporation is seeking a subcontractor to perform sprinkler head repairs at the Los Angeles Job Corps center located at 1020 South Olive Street, Los Angeles, California. The scope of work involves furnishing and installing one additional fire sprinkler head in the lobby area to extend existing coverage, which includes extending and connecting piping from the existing system above the T-bar ceiling. The contractor must provide all labor, supervision, materials, and safety measures, including the use of a man lift, with rental costs included in the lump sum bid. This opportunity is set aside for Small Business (SB), SBA certified Veteran Owned Small Business (VOSB), SBA certified Service-Disabled Veteran Owned Small Business (SDVOSB), SBA certified Women-Owned Small Business (WOSB), and SBA certified HUBZone Small Business (HUBZone SB). The solicitation is under NAICS code 238220, and the award will be based on best value as determined by MTC. Interested offerors must submit a bid sheet with a lump sum fee, a completed supplier packet including a W-9 and self-certification form, three references for projects of similar scope, and proof of insurance. Subcontractors are required to acquire a Unique Entity Identification number for reporting per FAR 52.204-10. The contract is subject to Service Contract Labor Standards under Wage Determination No. 2015-5613 Rev 31. Invoicing should be submitted to MTC on a weekly or bi-weekly basis and must include the purchase order number and a breakdown of service dates.
Los Angeles Job Corps

POSTED

about 5 hours ago

DEADLINE

in 4 days
View Details
NAICS: 238220
New
MJCC Multiple HVAC Replacement System
Solicitation # mjcc-multiple-hvac-replacement-system
The Montgomery Job Corps Center is seeking quotes for a turnkey replacement of eight HVAC systems across multiple buildings (A, B, E, F, and G) at its facility in Montgomery, Alabama. The scope of work includes the removal of existing equipment and the installation of new units, including a 10-ton system in Building E, a 7.5-ton system in Building B, and various other units ranging from 3.5 to 7.5 tons. Technical requirements for certain units include Energy Star certification, a minimum EER rating of 16, 90% efficiency furnaces, and the use of R-454B refrigerant. The project requires a 5-10 year warranty on equipment parts and a 2-year warranty on workmanship, with final acceptance contingent upon a signed punch list and applicable warranties. This is a subcontracting opportunity with a set-aside status for Small Business (SB), SBA certified Veteran Owned Small Business (VOSB), SBA certified Service-Disabled Veteran Owned Small Business (SDVOSB), SBA certified Women-Owned Small Business (WOSB), and SBA certified HUBZone Small Business (HUBZone SB). Bidders must provide a current SAM.gov UEI and active registration, Alabama licensing, certificates of insurance, and a detailed cost breakdown. The project is subject to the Davis-Bacon Act and the Service Contract Act, and bonding requirements apply based on the project value. Bids must be submitted by November 27, 2026, at 12:00 PM CST.
Montgomery Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238220
New
Joliet Job Corps-Request for Quote HVAC Replacement Female Dormitory
Solicitation # joliet-job-corps-request-quote-hvac-replacement-female-dormitory
Management & Training Corporation (MTC), operator of the Joliet Job Corps Center, is soliciting bids for a subcontract to replace the HVAC system in the female dormitory. This fixed-price, single lump sum project has an estimated value between $250,000 and $500,000. The scope of work includes the removal and disposal of ten existing furnace and air conditioning systems and the installation of ten new Carrier systems, along with the integration of a Pelican Building Automation System (BAS) across eleven units. The project is located at 1101 Mills Road, Joliet, Illinois, and is subject to the Davis-Bacon Act, requiring compliance with specific prevailing wage determinations. This opportunity is set aside for Small Business (SB), SBA certified Veteran Owned Small Business (VOSB), SBA certified Service-Disabled Veteran Owned Small Business (SDVOSB), SBA certified Women-Owned Small Business (WOSB), and SBA certified HUBZone Small Business (HUBZone SB). Bids must be submitted by November 23, 2026, and will be awarded based on overall best value. For bids totaling $25,000 or more, a bid bond of 20% is required, and the awarded contractor must provide performance and payment bonds from an A- rated surety company. Required documentation includes a bid breakout, MTC Supplier Self-Certification, and proof of insurance, including general liability of at least $1,000,000 and worker's compensation with employer's liability limits of $500,000.
Joliet Job Corps

POSTED

about 5 hours ago

DEADLINE

in 4 days
View Details
NAICS: 238220
New
Centennial Dry Sprinkler System & Compressor Replacement Services
Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services
Management & Training Corporation (MTC) is soliciting bids for dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project focuses on eliminating system leaks and replacing failing infrastructure in the Men's Dormitory (Building CM), Women's Dormitory (Building CW), and Recreation building (Building D) to prevent equipment wear and short-cycling. This is a fixed-price, single lump sum contract awarded based on overall best value. Bidders must be licensed fire sprinkler contractors and are required to conduct a physical site visit and sign an attendance roster prior to submitting a bid. The opportunity is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned businesses. Bids are due by December 1, 2026, and must include a detailed cost breakout and proof of insurance. Performance and payment bonds from an A-rated surety are required for bids totaling $25,000 or more. The contract is subject to prevailing wage rates per the Davis-Bacon Act, requiring the submission of weekly certified payroll reports and a fully executed SF 1413 form. Compliance with NFPA 25 (2023 Edition) and original equipment manufacturer installation requirements is mandatory, with final payment contingent upon a successful final inspection and the submission of operation and maintenance manuals.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 238220
New
Dep’t of Labor – Indoor sprinkler system replacement/work
Solicitation # SH26-XXX
The Shriver Job Corps Center is soliciting a single lump sum contract for the replacement and repair of the indoor fire sprinkler system in Building B in Devens, Massachusetts. The project is necessitated by freeze damage caused by water remaining in the pipes during winter months. The scope of work includes replacing the alarm valve, test and drain valve, couplings, and sprinklers, as well as repairing branch lines and performing system integrity tests via air, hydrostatic, and main drain tests. The contractor must provide all labor, materials, and equipment, and the final system must be certified by a Fire Protection Company affidavit. This is a set-aside for Small Business (SB), SBA certified Veteran Owned Small Business (VOSB), SBA certified Service-Disabled Veteran Owned Small Business (SDVOSB), SBA certified Women-Owned Small Business (WOSB), and SBA certified HUBZone Small Business (HUBZone SB). Proposals are due by December 8, 2026, following a mandatory site visit on December 1, 2026. Award will be based on best value, with evaluation weights assigned to price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). The contract is subject to the Davis-Bacon Act and requires compliance with Massachusetts wage rate decisions and OSHA/EPA regulations. Required documentation for bidders includes a valid Massachusetts Contractor's License, a W9, a completed vendor questionnaire, and proof of insurance naming Adams and Associates, Inc. as an additional insured. Upon award, work must commence within 14 days of the Notice to Proceed, and the contractor must provide a one-year guarantee of workmanship.
Shriver Job Corps

POSTED

about 5 hours ago

DEADLINE

in 19 days
View Details
NAICS: 238220
New
Inland Empire Job Corps-Request for Quote HVAC Replacement Cafeteria & OA CTS
Solicitation # inland-empire-job-corps-request-quote-hvac-replacement-cafeteria-oa-cts
This is a subcontracting opportunity with Management & Training Corporation (MTC) for the replacement of HVAC systems at the Inland Empire Job Corps center in San Bernardino, California. The project involves furnishing and installing new packaged HVAC units with gas heating for the Cafeteria and OA/CTS areas, including the recovery of refrigerant per EPA regulations, disposal of old units, and the modification of gas piping and ductwork. This is a fixed-price, single lump sum contract with an estimated value between $25,000 and $100,000. The set-aside status is Small Business (SB), including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Bids are due by November 23, 2026, and will be awarded based on overall best value. Mandatory requirements for award consideration include a physical site visit and the submission of a bid bond guarantee equal to 20% of the base bid for any bid equal to or greater than $25,000. Awarded contractors must also provide performance and payment bonds from a surety company with at least an A- rating. The project is subject to Construction Wage Rate Requirements, requiring compliance with California prevailing wages and fringe benefits. Additionally, contractors must adhere to OSHA safety standards, provide necessary personal protective equipment, and comply with federal and state electrical and environmental codes.
Inland Empire Job Corps

POSTED

about 5 hours ago

DEADLINE

in 4 days
View Details
NAICS: 238220
New
CBP7792 Cafeteria Hot Water Heater Replacement
Solicitation # CBP7792
Management & Training Corporation (MTC) is seeking bids for a subcontracting opportunity to replace the cafeteria hot water heater at the Sierra Nevada Job Corps Center in Reno, Nevada. The project requires a qualified, licensed plumbing contractor to isolate, remove, and dispose of an existing failing commercial natural gas-fired water heater and install a new commercial-grade, 125-gallon natural gas-fired unit. This is a fixed-price, single lump sum contract with an estimated value between $25,000 and $100,000. Bids must be submitted by November 25, 2026, and will be evaluated based on overall best value, considering price and experience with similar construction projects. The contract is designated as a Small Business set-aside. Requirements for bidders include a detailed cost breakout on company letterhead, proof of insurance, and three references. For bids of $25,000 or more, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety company. The contractor is responsible for all required inspections, operational testing of safety controls, and the provision of two sets of operation and maintenance manuals. Compliance with federal labor standards, including the Davis-Bacon Act and specific wage determinations for Washoe County, is mandatory.
Sierra Nevada Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)

Same awarding agency

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS