Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Veterans Affairs was posted on August 7, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

J041--Sources Sought - Ice Machine Cleaning Service - Minneapolis VA Medical Center

Closed
36C26324Q0968Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 1 hour ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Minneapolis VA Medical Center One Veterans Drive, Minneapolis, MN, 55417, USA

Set-Aside

NONE

Documents

1

Sources Sought - Ice Machine Cleaning Service - Minneapolis VA Medical Center

DOCX, Low prioritysources-sought
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → Network Contract Office 23 (36C263)
Contacts1 person available
OfficeSaint Paul, MN, 55101, USA
Office AddressSaint Paul, MN, 55101, USA
Contacts
Alisha MilanderContract Specialist

Full Description

Show more
The Minneapolis VA Medical Center requires ice machine cleaning services for up to 60 ice machines of varying brand names. This is a SOURCES SOUGHT NOTICE only looking for businesses to provide the services listed below for market research purposes. No proposals are being requested or accepted with this notice. THIS IS NOT A SOLICITATION FOR PROPOSALS OR PRICING AND NO CONTRACT SHALL BE AWARDED FROM THIS NOTICE. This notice shall not be construed as a solicitation or as an obligation on the part of the Department of Veterans Affairs. Responses to this notice will be treated only as information for the Government to consider as part of their market research efforts. The information provided will be used by the Government in developing its acquisition strategy regarding possible set aside for Veteran Owned and other socio-economic categories of small business. Interested parties are responsible for adequately marking proprietary, restricted or competition sensitive information contained in their response. The Government does not intend to pay for the information submitted in response to this notice and parties responding will not be entitled to payment for direct or indirect costs incurred in responding to this notice. The North American Industry Classification System (NAICS) code for this requirement is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, with an SBA Small Business Size Standard of $12.5 million. Please identify any of your firm s existing contract vehicles (e.g., GSA federal supply schedules) which provide similar services as those described in the Statement of Work below. Please provide all socio-economic categories of your firm (e.g., SDVOSB, VOSB, WOSB, Large Business, 8a, etc.) as well as your firm s SAM Unique Entity ID number (replaces DUNS number) and Government Contract POC. If you are a vendor capable of providing the requested information and required services described below with competitive pricing, send your information with a description of proof of capability to: contact@example.gov on or before 12:00 PM Central Time on Wednesday, August 14, 2024. See attached draft Statement of Work below for details of the requirement. *If applicable, FAR Provision 52.219-14 Limitations on Subcontracting, will apply to the potential solicitation if set-aside for Small-Businesses.* *If applicable, 852.219-76 VA Notice of Limitations on Subcontracting Certificate of Compliance for Supplies and Products, will apply to the potential solicitation if set-aside for Veteran Owned Small-Businesses.* DISCLAIMER This Sources Sought is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this Sources Sought that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this Sources Sought. The deadline for this information is 12:00 PM Central Time on Wednesday, August 14, 2024. STATEMENT OF WORK Minneapolis Veterans Affairs Medical Center (MPLS VAMC) Ice Machine Cleaning Services Objectives: Establish an ice machine cleaning service contract with an experienced contractor that can provide cleaning and servicing for up to 60 ice machines at the MPLS VAMC of the following brand names: Scotsman, Manitowoc, Hoshizaki, and Follett. Statement of Work: The Contractor shall provide all labor and tools necessary to perform cleaning and servicing on a variety of ice machines. Ice machine cleaner, condensate tablets, water filters, and air filters will be provided by the MPLS VAMC. The Contractor is responsible for all other items needed to perform services. Services will be performed on a semi-annually basis. Ice machines will be cleaned, serviced, and maintained in accordance with manufacturers service manual. At a minimum, the Contractor will follow procedures set forth in the manufacturer s Equipment Installation, Operation, and Maintenance Manual or applicable maintenance and service manual for the unit being serviced. The number of ice machines will fluctuate from year to year. There are currently 52 ice machines in service; however, the contract will leave room for expansion based on the needs of the MPLS VAMC. Semi-Annual Maintenance All machines must be cleaned two times per year with the first cleaning in January and the second in July. All cleanings must be scheduled with the Contracting Officer s Representative/Point of Contact (COR/POC) to ensure that proper documentation of these cleanings can be completed. Display an Out of Service placard or sign on ice machine in plain sight while ice machine is being serviced. Inspect ice machine. Notify COR/POC, or HVAC Shop if ice machine is non-operational or is damaged. Turn off ice machine. Remove all ice from ice storage bin or dispenser and discard. Change the ice machine water filter and pre-flush filter. Apply a sticker and/or mark on the unit or filter with the date of replacement. Date will be visible for random inspections. Inspect and clean air-cooled condenser. Clean or change air filters. Compressed air will not be used to clean air filters or coils. Add Nickel Safe (or equivalent) ice machine cleaner that meets NSF standards and place ice machine in clean cycle. After cleaning cycle is complete, disconnect electrical power to the ice machine and dispenser. Remove scale and residue from drain pan/reservoir. Remove all water and ice distribution tubes and soak them in an ice machine cleaner. Manually clean inside and outside of tubes to remove any contamination (mold, residue, and foreign deposits). Rinse all parts with fresh hot water. Clean exterior and interior side walls, base, evaporator, sensors, plastic parts, bins, reservoirs, and dispenser. Clean and sanitize condensate tubes and storage bin drain. Flush evaporator, water distribution, and ice distribution systems after cleaning with cleaning solutions. Rinse all areas with clean hot water. Restart the machine and run through two cycles of ice making, and then dispose of this ice. Fully sanitize each ice machine after cleaning or service. MPLS VAMC lock out /tag out procedures will be followed if at any time a unit is to be taken out of service for an extended period (examples: waiting on parts, continuation of repair, cleaning the following day, etc.). An Out of Service sign will be placed on the unit, and the service technician shall notify the COR/POC. CONTRACTOR CERTIFICATIONS/REQUIREMENTS: The Contractor shall be a duly licensed and trained HVAC/R Mechanic. The Contractor shall provide such certifications to the COR/POC. All technicians performing service will be EPA 608 certified, either Type I or Universal certification. Certification. Environmental Protection Agency (EPA) regulations (40 CFR Part 82, Subpart F) under Section 608 of the Clean Air Act require that technicians who maintain, service, repair, or dispose of equipment that could release refrigerants into the atmosphere must be certified. Technicians are required to pass an EPA-approved test to earn Section 608 Technician Certification. The tests are specific to the type of equipment the technician seeks to work on. - Tests must be administered by an EPA-approved certifying organization. The Contractor s Service Technician(s) performing the maintenance and repair services shall have at least two (2) years of experience maintaining, cleaning, and repairing ice machines or similar HVAC/R equipment. The selection, assignment, and management of the Contractor s employees is the responsibility of the Contractor. For work under this contract, the Contractor shall not employ any individual identified as a potential threat to the health, safety, security, and general wellbeing, or operation of the MPLS VAMC facilities or personnel. The Contractor is fully responsible for performance and conduct of his/her employees and subcontracted employees. The Contractor shall not allow any employee to perform work under this Contract while under the influence of alcohol, drugs, or any other incapacitating agent. Working hours: Anticipated hours of work will be Monday through Thursday from 7:00 am 5:00 pm. Additional hours must be coordinated through the COR/POC. Work will not be performed on weekends or federal holidays. Observed Federal Holidays: New Year s Day Martin Luther King Birthday Washington s Birthday Memorial Day Juneteenth Independence Day Labor Day Columbus Day Veteran s Day Thanksgiving Day Christmas Day Submittals: EPA Certifications and resumes of technicians performing the service. References: Manufactures Service and Maintenance Manuals of the ice machines Safety: The Contractor is responsible for maintaining a safe working environment for their employees as well as the MPLS VAMC Staff. Work areas will be kept cleaned throughout the day and all trash and demolished materials properly disposed of daily. Appropriate Personnel Protective Equipment will be worn while performing work on the MPLS VAMC Campus. Clean up any spills and post a yellow Wet Floor sign until dry. Notify The MPLS VAMC EMS Section @ +1 (555) 000-0000 if leak or spill cannot be contained. Technicians will not leave tools, parts or other items unattended while performing services. If technicians leave the work area, all items must be secured in a locked container. Security: Contracted personnel will need to obtain a PIV security badge prior to performing services at the MPLS VAMC. The Contractor s employees will work with COR/POC to provide documentation throughout the badging process. The Contractor will also need to complete Rules of Behavior Training to receive a badge. Contracted employees must be willing to provide fingerprints and personal information to obtain their security badge. The Contractor s Technicians are required to check in with the COR/POC upon arrival at the facility to obtain access and any additional instructions, task explanations, and project location information. Daily performance log sheets are required to be submitted to the COR/POC daily. Parking/Storage: Parking is available in parking lots 11, 43A, and 43B for vehicles (automobiles and Pickup trucks). Larger vehicles, equipment, job site trailers, or storage containers must utilize parking lot 43A only. The Contractor s contact information (name and phone number) is required to be displayed on all vehicles, equipment, trailers, or containers that are stored overnight at the MPLS VAMC. Dropping off tools and materials at the loading dock is permitted but no parking is allowed in the loading dock area. Unattended vehicles in unauthorized parking areas will be ticketed by MPLS VAMC Police.

More opportunities from Department Of Veterans Affairs → Network Contract Office 23 (36C263)

Same awarding agency

NAICS: 811310
New
Federal
J039--JLG Boom Lift Hydraulic Leak Repairs - STC (VA-27-00010304)
Solicitation # 36C26327Q0084
The Department of Veterans Affairs, Network Contracting Office 23, is issuing a sources sought notice for market research to identify qualified contractors for hydraulic repairs on a JLG Boom Lift, Model 600S, at the St. Cloud VA Health Care System in Minnesota. Under NAICS code 811310, the required services include replacing all hydraulic hoses through the cat track, replacing the hydraulic line from the pump to the block, replacing hydraulic oils, and updating the basket display decal and operator and ANSI manuals. The selected contractor must be located within a 100-mile radius and will be responsible for the pickup and delivery of the equipment to and from the St. Cloud VA campus. All repairs must be completed within three weeks of the contract award and must meet industry and manufacturer operational standards. This notice is not a formal solicitation and does not obligate the government to award a contract. Interested parties must submit their company information, including DUNS and SAM Unique Entity ID, a capability statement, and their socio-economic size classification to Contract Specialist Evan Beachy by 4:00 PM Central Time on November 04, 2026. Additionally, respondents should specify if the procurement can be handled through GSA, FSS, SEWP, or other existing contract vehicles. Responses are intended solely for planning purposes to help the government make informed acquisition decisions.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 811210
New
Federal
J065--Karl Storz Support Services IDIQ VISN
Solicitation # 36C26327Q0022
The Department of Veterans Affairs Network Contracting Office 23 is soliciting a brand-name only, five-year Indefinite Delivery, Indefinite Quantity (IDIQ) contract for OEM-certified support and service of Karl Storz OR1 Video Integration Systems across the VISN 23 Healthcare System. This requirement, managed under simplified acquisition procedures, covers multiple locations including Minneapolis, St. Cloud, Fargo, Central Iowa, Iowa City, Black Hills, and Sioux Falls. The scope of work includes preventive and corrective maintenance, replacement parts, software and firmware updates, cybersecurity compliance, and technical training for clinical and biomedical staff. The contract has a guaranteed minimum value of 300,000 dollars and a maximum lifetime cost limitation of 5,600,000 dollars. Award will be based on a comparative evaluation of price and technical factors, including vendor qualifications, cybersecurity capabilities, and service level agreement response times. The contractor must adhere to strict OEM standards, NIST calibration requirements, and VA security policies, including the submission of cybersecurity artifacts and a signed Business Associate Agreement for HIPAA compliance. Performance will be monitored via a Quality Assurance Surveillance Plan targeting 98.9 percent operational uptime and 99 percent response time rates. Offers are due by November 11, 2026, and must include a signed SF 1449, completed pricing schedules, and proof of OEM certification for technicians.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 238330
New
Federal
Replace Operating Room 5 Flooring
Solicitation # 36C26327Q0019
Solicitation 36C26327Q0019 is a Service-Disabled Veteran-Owned Small Business set-aside for the Department of Veterans Affairs, Network Contracting Office 23. The project involves providing all labor, materials, tools, and supervision to remove and replace the flooring and subflooring in Operating Room 5 (Room 4211, Building 1W) at the Des Moines VA Medical Center in Iowa. The work must be completed within 120 calendar days following the Notice to Proceed. Award will be granted to the responsible, eligible quoter who submits the lowest-priced acceptable quotation that meets all solicitation requirements, provided the price is determined to be fair and reasonable. Key technical requirements include conducting asbestos survey testing, adhering to the Architectural Design Manual, and utilizing certified installers through INSTALL or a comparable four-year apprenticeship program. The contractor must provide a floor tile mockup of 100 square feet to establish quality standards and comply with strict packaging and marking regulations for asbestos waste and HEPA filters. Administrative requirements include the submission of an Accident Prevention Plan and Site-specific Safety Plan for COR approval, as well as the provision of payment bonds or irrevocable letters of credit for contracts exceeding 35,000 dollars. The contract is subject to the Davis-Bacon Act and Buy American requirements, with specific limitations on subcontracting to ensure a minimum of 15 percent of the work is performed by the prime SDVOSB contractor.
Flooring Contractors

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 238220
New
Federal
J045--Glycol Loop Flushing - NWI
Solicitation # 36C26327Q0060
Solicitation 36C26327Q0060 is a firm fixed price request for quotation issued by the Department of Veterans Affairs Network Contracting Office 23 for the flushing, cleaning, and recharging of two closed-loop glycol heating systems, specifically the Surgery and Microbiology loops, at the Omaha VA Medical Center. The project requires the contractor to provide all labor, materials, equipment, and disposal handling to restore the systems to a stable operating condition using propylene glycol-based heat transfer fluid. The anticipated period of performance runs from November 1, 2026, to October 31, 2027, with the initial service required within 30 calendar days of award and a second identical service performed approximately 12 months later. Work must be conducted during normal business hours when temperatures exceed 40 degrees Fahrenheit and must comply with NFPA-99, ASHRAE 170, CMS, JCAHO, and VA HVAC Design Manual standards. This procurement is a total set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), with strict limitations prohibiting the contractor from paying more than 50 percent of the government-paid amount to non-certified SDVOSB or VOSB firms. Award will be based on a comparative evaluation of price, technical quality, past performance, and veterans involvement. Key deliverables include pre-flush fluid sampling reports, system volume calculations, refractometer readings, and disposal manifests. Following Amendment 0001, the response deadline has been extended to November 10, 2026. Proposals must be submitted electronically to the contracting officer and include separate volumes for administrative documents, technical and past performance narratives, a subcontracting statement, and a labor standards statement confirming compliance with Service Contract Labor Standards.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

6 days ago

DEADLINE

in 12 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS