This Solicitation opportunity from Government of Canada was posted on June 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Keysight N9030B-513 Signal Analyzer and Software

Closed

W8486-270908/A International

Submission Closed06/29/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515

New

Federal

66--METER,SPECIAL SCALE

DLA Land And Maritime

POSTED

DEADLINE

Programmable Optical Processor SupplyThe contract entails the supply of a WaveShaper 4000B Programmable Optical Processor or an approved domestic equivalent, intended for integration into advanced photonics systems supporting research and development initiatives. The requirement specifies the procurement of a high-precision, programmable device capable of manipulating optical signals with fine spectral control, essential for cutting-edge applications in optical telecommunications, quantum technologies, and laser systems. The place of performance is designated as Oak Ridge, Tennessee, with deliverables expected to meet stringent technical specifications aligned with the operational needs of the Department of Energy’s Oak Ridge National Laboratory, managed by UT-Battelle LLC as the DOE contractor. The solicitation is classified as a subcontract, with bids due by July 31, 2026, at 9:00 PM Eastern Time, following the posting date of July 24, 2026. The North American Industry Classification System code 334515 identifies the scope within optical instrument and component manufacturing, underscoring the specialized nature of the procurement. While no set-aside designation is specified, interested parties must be prepared to demonstrate technical compliance, supply chain reliability, and compliance with federal contracting standards. The opportunity is accessible through the SAM.gov platform, and proposers are expected to submit responses that include detailed technical qualifications, delivery timelines, and cost proposals aligned with the program’s objectives.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

EM Research, Inc. Frequency Synthesizer, ZFRThe Naval Air Warfare Center, Weapons Division, China Lake, intends to award a firm fixed price contract on a sole source basis to EM Research, Inc. for the procurement of Part ID ZFR-17000-05, a Frequency Synthesizer, ZFR. This decision is based on the company’s status as the original equipment manufacturer with exclusive capability to produce the part with identical form, fit, and function to those currently in use, ensuring seamless integration and operational continuity. EM Research, Inc. is selected due to its proven ability to deliver on schedule without requiring First Article Testing, thereby avoiding the significant delays associated with qualifying new vendors. This action follows FAR 6.103.1 and does not constitute a competitive solicitation; no RFQ will be issued, and no competitive quotes will be sought. Despite the sole source intent, interested parties may submit a capability statement by July 30, 2026, referencing solicitation number N68936-26-SIMACQ-DB0000M/EB0000M-0536, to demonstrate their ability to meet the requirement without compromising quality, accuracy, reliability, or schedule. Responses must be sent via email to Gwynn Hartkopf and are subject to mandatory SAM.gov registration in an active status prior to any potential award. Contractors must also be certified through the Defense Logistics Information Services’ Joint Certification Program to access Controlled Unclassified Information, with access restricted to a single designated Data Custodian per CAGE code, approved via DD Form 2345. All parties are advised to ensure SAM registration and certification are completed well in advance due to processing timelines.

Naval Air Warfare Center

POSTED

DEADLINE

1EIS Two Network TestersThe U.S. Department of Defense through the office FA5613 700 Cons Pk is seeking sources for two network testers with specific technical characteristics essential for operational use. This presolicitation notice, identified by solicitation number F3N6046161AC01 and published on July 24, 2026, invites qualified companies to respond by the deadline of July 31, 2026. The North American Industry Classification System code 334515 applies to this procurement, indicating a focus on communications equipment manufacturing. There is no set-aside designated for small businesses or other categories, making the opportunity open to all eligible contractors. The required equipment is intended for performance at Ramstein, and all inquiries must be directed to the primary point of contact, Mrs. Svetlana A. Allendorf, at svetlana.allendorf.ru@us.af.mil, with Carleen Clinger available as a secondary contact. The contracting office is located at APO AE 09021-3076, and further details can be accessed via the official SAM.gov link provided.

POSTED

DEADLINE

Coherent Waveshaper 4800B or domestic equivalentThe contract requires the procurement of a WaveShaper 4000B Programmable Optical Processor or a domestic equivalent that meets specific technical criteria: insertion loss must be under 5 dB, maximum power handling must reach 27 dBm, operational wavelength range must cover 1500 to 1600 nm, and the tunable linewidth must be adjustable up to 10 GHz. The equipment must be shipped and fully documented before September 24, 2026, and received no later than September 29, 2026. The solicitation, issued under PR489060 by Oak Ridge National Laboratory under the U.S. Department of Energy, targets suppliers through a federal procurement channel with a response deadline of July 31, 2026. The primary point of contact is Wesley Haden, reachable via email and phone, with the place of performance specified as Oak Ridge, Tennessee, and the NAICS code listed as 334515 for optical instrument manufacturing.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

METER, AUDIO LEVELThis contract is for the procurement of four audio level meters under solicitation SPE7M1-26-T-223Y, with a specified NSN of 6625-00-648-9157 and a delivery deadline of 168 days from contract award. The items must be delivered FOB origin with zero variance in quantity and are subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E using preservation method 41, dry condition, and D3 unit containers, with marking in accordance with MIL-STD-129 and no special marking required. The shipping address is DLA Distribution San Joaquin in Tracy, CA, and transportation guidelines follow DLAD Proc Notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List, including strict prohibitions against intentional introduction of mercury or mercury compounds into the supplied hardware, except for functional applications in specific exempted devices like batteries, fluorescent lamps, and instrument controls, which must contain a secondary containment boundary per NAVSEA 5100-003D. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The item is designated as a critical application with two specific part numbers from Prime Technology LLC. The contract was posted on July 23, 2026, with responses due by August 3, 2026, under NAICS code 334515, and is managed by the Department of Defense’s Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CELL, COLORIMETERThe contract pertains to the procurement of cylindrical glass cuvettes and caps for colorimetry, each with a 10 ml capacity and a marked volume indicator for accuracy. These items are packaged two per package, with the unit of issue designated as PG. The specification incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The items are subject to DLA packaging standards, including commercial packaging compliant with Medical Marking Standard No. 1, which replaces MIL-STD-129. All units must be sealed in containers that protect against damage and be packed in suitable commercial shipping containers to ensure safe delivery at the lowest carrier rate to the FPO destination with ZIP 96616. Labeling and marking must adhere strictly to Medical Marking Standard No. 1, and government identification must be removed from non-accepted supplies. Covered defense information may apply, and the NSN 6630-01-680-9276 is being procured under solicitation SPE2DS-26-T-265R with a response deadline of July 29, 2026, and a delivery requirement of 20 days after award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

WASH SOLUTION, ELECTThe contract solicitation SPE2DH-26-T-5171 seeks the procurement of 4 boxes of WASH SOLUTION, ELECTRODE, a colorless, odorless liquid with a pH range of 4.75 to 7.75 and a boiling point of approximately 100.00 degrees Celsius, supplied in unit quantities of 20 units per box. The material is soluble and must be handled with care to avoid extreme temperatures and direct sunlight due to the risk of releasing irritating gases and vapors upon decomposition. Packaging and marking must comply with commercial standards as defined in MIL-STD-2073-1E, Packaging Level B, and Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each unit must be sealed in a suitable container and packed inside commercial shipping containers to ensure safe delivery via common carrier to the destination point of APO, ZIP 96278-2069 with FOB Destination terms, and delivery is required within 20 days after the award date, targeting an original delivery window of July 16, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the contractor must comply with all applicable federal regulations including the Hazard Communication Standard for labeling and must submit hazard labels and Material Safety Data Sheets before award. The contract incorporates a comprehensive set of Federal Acquisition Regulation clauses addressing cybersecurity, contractor reporting, whistleblower protections, conflict of interest, and supply chain security, including mandatory adherence to NIST SP 800-171 DOD assessment requirements and prohibitions on the use of covered defense telecommunications equipment. Invoicing must be handled electronically through the Wide Area WorkFlow system, with receiving reports and invoices submitted separately or as a combo document per DFARS requirements, and contractors must maintain active registration in the System for Award Management with accurate representations regarding small business status, socioeconomic certifications, and compliance with trafficking and arbitration restrictions. The Government reserves the right to apply the HUBZone price evaluation preference and may process this solicitation as an automated award since it does not include first article test requirements. The point of contact for inquiries is Tina Vu at DLA Troop Support Medical Supply Chain FSH, and proposals must be submitted via the DLA Customer Service website prior to the July 21, 2026 deadline. Contractors must be registered in both SAM and WAWF

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

SENSOR, CURRENTThe contract is for the procurement of four current sensors with NSN/part number 6625-01-586-2217 under solicitation SPE7M1-26-T-227Q, issued by the Department of Defense’s Maritime Supply Chain. The delivery requirement mandates fulfillment within 168 days after order, with the response deadline for offers set for August 3, 2026, and the solicitation posted on July 23, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The contract incorporates DLA packaging requirements and applies Covered Defense Information policies. All offerors must submit a complete data package for both the approved and alternate parts, and government identification must be removed from non-accepted supplies. The place of performance is Tracy, California, 95304-5000, with Michael Reese as the primary point of contact. The NAICS code is 334515, classifying this under other sensing instrument manufacturing.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

LEAD SET, TESTThe contract specifies the procurement of 160 units of a lead set for testing with NSN 6625-01-607-5044 and part number 6481 from Fluke Electronics Corp, under solicitation SPE7M1-26-T-229U. Delivery is required within 141 days after contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The packaging and preservation must comply with MIL-STD-2073-1E, specifically Appendix D for kits, and marking must adhere to MIL-STD-129 with special marking code ZZ indicating unique requirements. The item may contain batteries, and all packaging, marking, and shipping must meet DLA’s hazardous materials guidelines under IP025. The government requires full adherence to its Master List of Technical and Quality Requirements, with revision control dependent on the acquisition type and applicable solicitation dates. Palletization must conform to DLA’s procurement packaging standards, and all units must be delivered to DLA Distribution Cherry Point in North Carolina. The contract prohibits removal of government identification from non-accepted supplies, and the unit of issue is each (EA), with zero variance permitted in quantity. The required delivery date is January 22, 2027, with a needed ship date of December 23, 2026, and the North American Industry Classification System code is 334515.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

DETECTOR, RADIO FREQThe contract is for the procurement of 16 units of a Radio Frequency Detector, identified by NSN 6625012698468 and part number DZM185ABM, under solicitation SPE7M1-26-T-226B. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Delivery is required within 168 days of contract award, with product to be shipped FOB origin and inspected and accepted at the destination. No quantity variance is permitted. Packaging must conform to MIL-STD-2073-1E with unit packaging code U, and all marking shall follow MIL-STD-129 without special marking codes. The item may contain batteries, requiring adherence to hazardous materials packaging and shipping guidelines per IP025 and DLAD Proc Note C19. The delivery destination is the DLA Distribution San Joaquin receiving warehouse at 25600 S Chrisman Road, Tracy, CA 95304-5000, with a required ship date of January 19, 2027. The unit of issue is each, priced at $16.00 per unit, totaling $256.00. The contract is issued by the Department of Defense through the Maritime Supply Chain, with Michael Reese as the point of contact.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

VOLTMETERThe contract mandates the delivery of one voltometer with NSN 6625-01-356-9312 under solicitation SPE7M1-26-T-231L, requiring fulfillment within 20 days of award with delivery FOB destination and no tolerance for quantity variance. Packaging must comply with MIL-STD-2073-1E, using preservation method 41, dry conditioning, and non-cushioning materials, with unit containment EC and intermediate containment DO, and all marking must adhere to MIL-STD-129 with no special identification code applied. The item is destined for the USS SAN ANTONIO LPD 17 at FPO AE 09587, with shipment instructions referencing DLAD PROC NOTES C19 and C20 for transportation logistics. The voltometer falls under the DoD's authorized unit of issue and is subject to all technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions. The contract specifies a required delivery date of July 24, 2026, with the point of contact for inquiries being Michael Reese of the Department of Defense, Maritime Supply Chain, and the procurement is classified under NAICS code 334515 for electrical equipment manufacturing.

MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

The Department of National Defence is seeking the supply and delivery of one Keysight N9030B-513 Signal Analyzer with specific configuration options, along with three associated software applications: Digital Demodulation Analysis Software, Power Suite Measurement Application, and Standard Vector Signal Analysis Software, or equivalent alternatives. Bidding is restricted exclusively to suppliers who already hold an active Supply Arrangement in series E60HN-16ELEC with Public Services and Procurement Canada; no new applicants are permitted to submit proposals. All items must be delivered no later than October 15, 2026. This solicitation is governed by multiple international trade agreements including CFTA, CETA, CPTPP, and others, ensuring compliance with Canada’s procurement obligations under global and bilateral frameworks. The response deadline is June 29, 2026, at 2:00 PM, and the place of performance is Montreal, Canada. The primary point of contact for inquiries is Chao Wang, reachable via email or phone provided in the solicitation.

General Info

Department of National Defence seeks pre-qualified suppliers for Keysight equipment delivery by October 15, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical SignalsView NAICS

Place of Performance

*Montréal, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 10

Solicitation

Response DeadlineJun 29

Deadline has passed

Submission Closed

06/29/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

Contacts

CHAO WANGPoint of Contact

contact@example.gov

+1 (555) 000-0000

Full Description

As a requirement of the Supply Arrangement (SA) this notice is published on CanadaBuys for a period of 15 calendar days. Only pre-qualified Suppliers have been invited to bid. Suppliers that do not already hold a Supply Arrangement in series E60HN-16ELEC with PSPC cannot submit a bid. The Department of National Defence requires the supply and delivery of the following items under solicitation W8486-270908/A: Quantity 1 Keysight Signal Analyzer P/N: N9030B-513, EA3,LNP,MPB,P13,B85,N9030RT1B MMR: N9030B-513,EA3,LNP,MPB,P13,B85,N-:7ZXR5 And Quantity 1 Keysight Digital Demodulation Analysis Software P/N: 89601AYAC MMR: N/A And Quantity 1 Keysight Power Suite Measurement Application P/N: N90EMPSMB MMR: N/A And Quantity 1 Keysight Standard Vector Signal Analysis Software P/N: 89601202C MMR: N/A OR EQUIVALENT Requested delivery date for all the above-mentioned goods is to be no later than October 15, 2026. Trade Agreements CFTA Canadian Free Trade Agreement CCFTA Canada–Chile Free Trade Agreement CPTPP Comprehensive and Progressive Agreement for Trans-Pacific Partnership CCOFTA Canada–Colombia Free Trade Agreement CETA Canada-European Union Comprehensive Economic and Trade Agreement CHFTA Canada–Honduras Free Trade Agreement CKFTA Canada–Korea Free Trade Agreement CPAFTA Canada–Panama Free Trade Agreement CPFTA Canada–Peru Free Trade Agreement CUFTA Canada–Ukraine Free Trade Agreement CUKTCA Canada-United Kingdom Trade Continuity Agreement WTO-GPA World Trade Organization–Agreement on Government Procurement If you wish to find out how you can become a qualified SA Holder for future requirements and/or to obtain additional information regarding this SA program, please contact PSPC at jeremy.racine@tpsgc-pwgsc.gc.ca