Top

KFFO- GERBER WELL BACK-UP GENERATOR

Active

140L4326Q0093Federal

Response Deadline08/07/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of The Interior → Oregon State OfficeView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

Set-Aside

NONE

Documents

(1)

Sol_140L4326Q0093.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedJul 28

Solicitation

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 09:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of The Interior → Oregon State Office

Contacts1 person available

OfficePORTLAND, OR, 97204, USA

Organization / Agency

Department Of The Interior → Oregon State Office

View Agency Profile

Office AddressPORTLAND, OR, 97204, USA

Contacts

Cochran Kevin

contact@example.gov

+1 (555) 000-0000

Full Description

KFFO- GERBER WELL BACK-UP GENERATOR

Similar Contracts

Same NAICS industry code

NAICS: 335312

New

DIBBS

RESOLVER, ELECTRICALThe contract pertains to the procurement of five electrical resolver units with NSN 5990-00-573-4731, under solicitation SPE7M5-26-T-355V, with a delivery requirement of 20 days after award. The supplier must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment. All supplies must adhere to DLA packaging guidelines, and any government identification must be removed from non-accepted items. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Documentation for source approval is mandatory, and the alternate offeror must submit a complete data package covering both the primary and alternate parts. The solicitation closed on August 10, 2026, and is managed by the Department of Defense’s Active Devices Division, with Jeanette Heisey as the primary point of contact.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

MOTOR, ALTERNATING CThe contract pertains to the procurement of three alternating current motors with NSN 6105-01-260-9145 and part number 817025-001 from Armstrong Pumps Inc, under solicitation SPE7M0-26-T-020Y. Delivery is required within five days of award, with delivery terms specified as FOB origin and inspection and acceptance points at the destination. The unit of issue is each, with no variance allowed in quantity. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951; packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. Mercury or mercury-containing compounds are strictly prohibited unless functionally integral to batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, in which case portable devices must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Shipping must occur via the fastest traceable means, excluding parcel post, to the designated government receiving location at Fort Eustis, Virginia. The required delivery date is July 27, 2026, and the contract is subject to government-only use codes and internal tracking identifiers.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CONTACTOR, MAGNETICThe contract is for the procurement of two magnetic contactors with NSN 6110-01-437-9870 under solicitation number SPE7M1-26-T-235G, issued by the Department of Defense through the Maritime Supply Chain organization. Delivery is required within 20 days of award, and responses must be submitted by August 10, 2026, with the solicitation posted on July 28, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The contract requires full data package submission for both the approved and alternate parts, including the removal of government identification from non-accepted supplies in accordance with DLA packaging requirements. Performance is to be delivered to Pearl Harbor, Hawaii with a zip code of 96860-5033. The NAICS code is 335312, and the point of contact is Michael Reese, reachable via email and phone as listed. This is a federal procurement with no set-aside designation.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SYNCHRO, DIFFERENTIAL TThe contract pertains to the procurement of one unit of a Synchro, Differential Transmitter with NSN 5990-00-924-4166, requiring delivery within five days to the U.S. Coast Guard at FPO AP 96681-3904 under FOB Destination terms. The item must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the packaging must conform to MIL-STD-2073-1E and marking requirements per MIL-STD-129 with no special markings. The supplier is prohibited from using any Class I ozone-depleting substances in design, manufacturing, or testing unless explicitly approved in writing by the Contracting Officer, and mercury or mercury-containing compounds are strictly forbidden except in specific exempted applications like batteries, fluorescent lights, sensors, and weapon systems, with additional containment requirements for portable devices. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the part must meet SAE AS20708C Revision C dated June 1, 2019, with part number M20708/36-01D. Full and open competition applies, and the contract explicitly excludes commercial items as defined by FAR 11.001. The item must be shipped using the fastest traceable means, with parcel post prohibited. The contract number is SPE7M0-26-T-020W, with a required delivery date of July 27, 2026, and the primary point of contact is Laurie Wassmuth of DLA.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CONTACTOR, MAGNETICThe contract is for the procurement of one magnetic contactor with NSN 6110016827290 and part number MX52CD from Sensata Technologies, Inc., under solicitation SPE7M0-26-T-020Q. The item must be delivered within five days to the specified address at Camp Ripley, Minnesota, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and unit container codes, with marking conforming to MIL-STD-129 and no special marking required. The contract strictly prohibits intentional addition of mercury or mercury-containing compounds to the product or its contact surfaces, with exceptions limited to approved functional uses such as batteries, fluorescent lights, sensors, weapon systems, or naval chemical reagents, and portable devices containing mercury must include a secondary containment and be shockproof per NAVSEA 5100-003D. The item must be shipped via traceable means, excluding parcel post, and the required delivery date is July 29, 2026, with no need ship date specified. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The contract is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys office, with point of contact Laurie Wassmuth, and falls under NAICS code 335312 for electrical equipment manufacturing.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

EnginesThe contract titled Engines, issued under solicitation number SPMYM326Q4065, is a combined solicitation set aside entirely for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 335312 indicating classification within engine and turbine manufacturing. The opportunity was posted on July 15, 2026, with a firm response deadline of July 28, 2026, at 2:00 PM Eastern Time. The contracting activity is managed by DLA Maritime – Portsmouth, a unit of the Department of Defense, located in Portsmouth, New Hampshire, and the work is to be performed in Kittery, Maine, with a zip code of 03904. Primary point of contact for inquiries is Gary Chandler, reachable via email at gary.d.chandler.civ@us.navy.mil, with secondary support provided by the DLA-KME EMAIL BOX. Interested parties must refer to the full solicitation and associated documents for detailed requirements, specifications, and submission instructions. The official listing for this opportunity can be accessed through the SAM.gov portal.

DLA Maritime - Portsmouth

POSTED

DEADLINE

MOTOR, ALTERNATING CURRENTThe Defense Logistics Agency is conducting market research to identify qualified sources for the acquisition of an alternating current motor, NSN 6105-01-172-7306, Part Number 11463228, destined for the M-D6 weapon system. This requirement falls under NAICS Code 335312 with a size standard of 1,250 employees and is currently designated for set-aside procurement under the Economically Disadvantaged Women-Owned Small Business (EDWOSB) program. The government holds complete technical data rights with no restrictions on engineering, tooling, or manufacturing, enabling full competitive potential for future solicitations. All prospective contractors must be prequalified and meet strict eligibility criteria, including active certification under the United States/Canada Joint Certification Program to access export-controlled technical data governed by the Arms Export Control Act and Export Administration Act. Export of controlled information outside the United States is strictly prohibited without prior government authorization, and offerors must ensure both their own and any supply chain sources possess valid certifications. Contractors interested in competing for future solicitations must be prepared to assume full responsibility for all manufacturing and production costs, including nonrecurring and recurring engineering, supply chain management, long-lead procurement, obsolescence mitigation, logistics, and final delivery. The requirement is not an active solicitation and does not obligate the government to issue a contract, nor is any funding available for response preparation. Responses are voluntary and will not be acknowledged or evaluated for current procurement purposes. Interested parties are directed to the AvMC public website for source approval processes and further information. All inquiries and submissions must be directed to the designated point of contacts at Redstone Arsenal, Alabama, and any participation is solely at the respondent’s own cost and risk.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

Manufacture and Supply of Voltage Regulator SetsThe contract calls for the full lifecycle production, testing, and delivery of 76 units of REGULATOR SET, VOLTA, manufactured to meet rigorous military specifications. This includes all phases from initial fabrication through final quality assurance testing, ensuring each unit complies with required performance, durability, and safety standards. Packaging and labeling must adhere to established military norms for traceability, handling, and storage, with full documentation provided to confirm conformance. The work is governed under a total small business set-aside, reserved exclusively for small business concerns as defined by the SBA under FAR 19.5, and classified under NAICS code 335312 for electrical equipment manufacturing. The solicitation is issued by the Maritime Supply Chain under the Department of Defense, with performance required at Tracy, California, specifically at the zip code 95304-5000. The opportunity was posted on July 27, 2026, with a response deadline of July 30, 2026, indicating a tightly constrained bid window. This is structured as a subcontract opportunity, suggesting the prime contractor will manage the delivery chain and may be sourcing from qualified small business suppliers. All proposals must align strictly with military requirements, and failure to meet technical, packaging, or compliance standards will result in rejection, regardless of pricing or timeline.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MOTOR, ALTERNATING CThe contract pertains to the procurement of three alternating current motors with NSN 6105-01-346-1347 under solicitation SPE7M0-26-T-005Z, issued by the Department of Defense’s Maritime Supply Chain ESOC Buys. Delivery is required within five days after award, with a firm delivery date of July 13, 2026, and FOB origin terms place transportation risk and costs on the contractor until items are loaded at the origin. Items must be delivered to the Portsmouth Naval Shipyard in Kittery, ME, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation method 10 (cooling/drying), wrapping in jute material, medium cushioning, unit container D3, and intermediate container E5, with palletization meeting DLA Packaging Requirements for Procurement (RP001). All items must be marked in accordance with MIL-STD-129 using standard military barcoding for NSN, contract number, and traceability, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except in specific functional applications like batteries, fluorescent lights, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof with a secondary containment boundary as per NAVSEA 5100-003D. Contract clauses incorporate deviations covering equal opportunity for workers with disabilities, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity requirements including NIST SP 800-171 and basic safeguarding of contractor information systems, prohibitions on hexavalent chromium and toxic materials, prohibition of acquisition from communist Chinese military companies, export control, electronic payments via WAWF, acceleration of payments to small business subcontractors, and compliance with the System for Award Management. The contract applies fixed-price supply and service terms, with inspection governed by FAR 52.246-2, and includes provisions for contract modifications, changes, and default. All submissions must be made electronically through DIBBS, with no paper or manual submissions permitted. Offerors must provide a unique entity identifier and CAGE code, certify small business status, and disclose any joint venture partners with their UEIs, particularly if applying under WOSB, EDWOSB, SDVOSB

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

REGULATOR SET, VOLTAThe contract solicitation is for a REGULATOR SET, VOLTA with NSN 6110-15-037-0562 and a quantity of 76 units, under purchase request 7017226532. The requirement is part of a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The solicitation is issued under NAICS code 335312, which corresponds to Electric Lighting and Wiring Equipment Manufacturing, and is managed by the Department of Defense through the Maritime Supply Chain office. No technical data is currently available for the part, and offerors must submit a complete data package covering both the approved and alternate part configurations. The delivery deadline is set at 187 days from award, with performance to occur in Tracy, California, 95304-5000. The solicitation was posted on July 27, 2026, and responses are due by July 30, 2026. The primary point of contact is Michael Reese, reachable via email and phone provided in the contract details.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MOTOR, ALTERNATING CThe contract solicitation SPE7M1-26-T-217K is for one unit of an alternating current motor with NSN 6105-01-282-8829, procured under simplified acquisition procedures by the Department of Defense’s Maritime Supply Chain through DLA Land and Maritime. Delivery is required within 208 days ADO with a firm delivery deadline of September 30, 2026, and shipment must originate from the contractor’s location under FOB Origin terms, though final acceptance occurs at the destination in New Cumberland, Pennsylvania, where the item will be inspected and received by Government personnel. Packaging, preservation, and labeling must strictly adhere to DLA Packaging Requirements for Procurement (RP001) and military standards MIL-STD-2073-1E and MIL-STD-129, including the use of Data Matrix barcodes and Method 41 – Clinging/Dry preservation with no additional preservative material. All hazardous materials must be labeled in compliance with OSHA’s Hazard Communication Standard and DFARS 252.223-7001, with advance disclosure of any alternative labeling required. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material safety, cybersecurity safeguards, subcontracting, inspection at destination, default remedies, and payment acceleration for small business subcontractors. Cybersecurity obligations are robust, requiring compliance with NIST SP 800-171 DOD Assessment Requirements and the safeguarding of covered defense information under DFARS 252.204-7012, with deviation 2026-O0025 applicable. The offeror must provide a complete data package for both approved and alternate parts, disclose unique entity ID and CAGE code, and certify size status and socioeconomic status including WOSB, SDVOSB, HUBZone, or SDB if claiming small business preferences. Affirmative responses regarding covered defense telecommunications equipment trigger mandatory disclosures of OEM and distributor information at any tier. Payment must be processed via WAWF using an Invoice and Receiving Report for this fixed-price supply line item, and no contract value is specified in the solicitation due to absence of a formal pricing section. Proposals must be submitted electronically through DIBBS by July 27, 2026, and all technical and quality requirements are governed by

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MOTOR, ALTERNATING CThe contract pertains to the procurement of one alternating current motor with NSN 6105-01-204-6636, under solicitation SPE7M1-26-T-235A, issued by the Department of Defense’s Maritime Supply Chain. The delivery is required within 403 days after order, with a response deadline of August 7, 2026. The technical and quality requirements governing this acquisition are defined by the DLA Master List of Technical and Quality Requirements, accessible via the DLA eProcurement website, and the applicable revision is determined based on the solicitation or award date depending on the acquisition size. Strict prohibitions are in place against the intentional use of mercury or mercury-containing compounds in or on the supplied hardware, with exceptions limited to specific applications such as batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, and chemical reagents explicitly authorized by NAVSEA. Any portable devices containing mercury must be shockproof and equipped with a secondary containment barrier, in compliance with NAVSEA 5100-003D. The contractor must also ensure the complete removal of government identification from any non-accepted supplies and provide a full data package covering both the approved and alternate parts, as no data is currently available on this item. The place of performance is New Cumberland, PA, and the primary point of contact is Michael Reese, reachable via email and phone provided.

MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days

View Details

More opportunities from Department Of The Interior → Oregon State Office

Same awarding agency

NAICS: 484110

New

Federal

Z--Round Valley Road Rock HaulingThe contract pertains to the acquisition and delivery of approximately 550 tons of 1½-inch minus commercial crushed aggregate for Round Valley Road in the Lakeview District of the Bureau of Land Management (BLM) in Oregon, with work to be performed under a Firm Fixed-Price structure. The scope includes extraction, crushing, transportation, and delivery of material to designated sites near Klamath Falls and Medford, Oregon, with all work subject to strict environmental, safety, and regulatory standards including AASHTO, ASTM, OSHA, MSHA, and 40 CFR Part 112 for spill prevention. Performance is restricted to daylight hours between one-half hour before sunrise and one-half hour after sunset, with no work permitted on weekends or federal holidays unless explicitly authorized. The contractor must comply with environmental suspension protocols triggered by weather, fire danger, or the discovery of endangered species, and is required to immediately halt work and report any archaeological or historical discoveries under Public Law 93-291. Additionally, fire suppression equipment must be maintained and operational within one-eighth mile of state forest protection districts during fire season in accordance with Oregon state statutes. The solicitation is a total small business set-aside under NAICS code 484110 with a size standard of $34 million, requiring all offerors to be registered in SAM.gov and maintain an active UEI. Evaluation is based on a trade-off process prioritizing relevant experience—specifically, demonstrated performance on three similar projects within the past five years and deep familiarity with Oregon’s transportation and weather conditions—followed by fair and reasonable pricing and past performance. Payment will be made via the Invoice Processing Platform (IPP), not WAWF, and contractors must submit electronic invoices itemized by contract line. The contract period runs from the date of award through August 31, 2026, with potential for schedule extensions under unusual weather conditions, though no compensation is provided for routine delays. Special requirements include the submission of a modified SPCC plan, equipment decontamination to prevent invasive weed spread, and adherence to whistleblower protections, anti-trafficking, equal opportunity, and subcontracting compliance clauses. The Contracting Officer is the sole authority to accept nonconforming work, while a designated COR will handle daily oversight, work hour approvals, and technical direction. All bids must be submitted electronically by July 30, 2026, to Christy Webster at the Department of the Interior, with no physical submissions permitted

General Freight Trucking, Local

POSTED

DEADLINE

R--Online management support services for chemical MaThis contract solicitation for online management support services for chemical Material Safety Data Sheets (MSDS) and Safety Data Sheets (SDS) is a Total Small Business Set-Aside under FAR 19.5, targeting sole-source participation by small businesses. The work involves remote, non-personal services to maintain and manage a digital SDS database for Bureau of Land Management facilities in Oregon and Washington, ensuring compliance with OSHA’s Hazard Communication Standard, 29 CFR, 40 CFR, and the Globally Harmonized System (GHS). Key deliverables include an online database with advanced search, mobile and offline access, automated GHS-compliant updates, chemical inventory tracking, QR code and photo upload functionality for identification, hazard placard and secondary container label generation, and monthly progress reports. The contract includes a five-year base period with four optional renewal years, beginning September 22, 2026, and extending through September 21, 2031. All proposals must be submitted electronically via email to the Contracting Officer by 9:00 AM MT on July 31, 2026, organized into three volumes: Price, Technical Approach, and Past Performance. Evaluation prioritizes Technical and Past Performance as significantly more important than Price, with award based on the most advantageous offer using a trade-off process rather than LPTA. Payment must be submitted through the Treasury’s Invoice Processing Platform (IPP), and the contractor is responsible for archival and return of all government-furnished materials. Compliance with numerous FAR clauses is required, including whistleblower protections, anti-trafficking, paid sick leave, small business subcontracting incentives, and electronic funds transfer. The contractor must also implement inspection processes per 52.246-1 and adhere to security representations under deviations for clauses 52.240-90 and 52.240-91. Performance is conducted remotely with all deliverables addressed to the BLM Oregon State Office in Portland, OR.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

J--Front and Rear-end collision repairs for a 2024 FOThis contract solicitation, identified by number 140L4326Q0088, seeks bids for front and rear-end collision repairs on a 2024 Ford F-150 XL Supercab under a Total Small Business Set-Aside, as defined by FAR 19.5. The work requires complete replacement and refinishing of front and rear components including the bumper cover, grille, headlamp, hood, fender, rear bumper assembly, tailgate, and related hardware with strict adherence to OEM repair standards, SAE torque specifications, and corrosion protection protocols such as neoprene tape and inhibiting pastes for dissimilar metal contact. All repairs must be defect-free, clean, and compliant with manufacturer guidance, with welds required to be free of defects and burn-through. Performance must occur at the contractor’s facility located within fifty miles of the BLM Northwest Oregon District Office in Salem, Oregon, with the period of performance running from August 17, 2026, to September 17, 2026. The government will inspect and accept the vehicle at the contractor’s site after corrections to any deficiencies, with final authority resting with the Contracting Officer. The procurement is issued by the Department of the Interior’s Oregon State Office in Portland, with Addison Page listed as the primary point of contact. Offerors must be certified small businesses in SAM and provide a Unique Entity Identifier and CAGE code, along with responses to mandatory representations regarding pending legal actions, debarment, or suspension status. Proposals must be submitted in two volumes—price and technical—via email to the Contracting Officer by 9:00 AM MT on July 31, 2026. Evaluation will prioritize Technical Capability and Past Performance as equally important to Price, allowing for trade-off selections to identify the most advantageous offer. Invoicing must be submitted electronically through the Invoice Processing Platform, and the contract will be awarded using a Firm-Fixed-Price structure based on the most advantageous proposal considering both cost and quality. Numerous FAR clauses are incorporated including those covering whistleblower rights, subcontracting protections, labor standards, equal opportunity, paid sick leave, combating trafficking in persons, and electronic payments. A deviation to clause 52.244-6 is authorized effective February 2025, and an alternate version of 1452.233-2 is in use. No pricing data, packaging requirements, or contract value estimates

Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

DEADLINE

Coating and Containment Materials SupplyThe contract is for the supply of protective coating materials, containment system components such as tarps and scaffolding parts, and associated consumables under a Total Small Business Set-Aside designation, restricted exclusively to small businesses as defined by the SBA. It is classified under NAICS code 325510, corresponding to the paint and coating manufacturing industry, and is structured as a subcontract. The opportunity was publicly posted on July 21, 2026, with a firm deadline for responses on August 22, 2026. The ordering agency is the Oregon State Office within the Department of the Interior, though specific performance locations and point of contact details are not provided. All deliveries and services are expected to support federal operations requiring protective and containment solutions, with full compliance required for small business certification and procurement regulations.

Paint and Coating Manufacturing

POSTED

DEADLINE

Demobilization and Site RestorationThe contract titled Demobilization and Site Restoration pertains to the dismantling of containment systems, removal of equipment, final cleanup, and full restoration of the site to meet specified regulatory and environmental conditions. This effort is intended to return the location to a safe, stable, and compliant state following prior operations, ensuring no residual hazards or disruptions remain. The work must be performed in accordance with applicable standards and timelines, including thorough documentation and verification of site conditions post-restoration. This is a small business set-aside subcontract under NAICS code 238990, reserved exclusively for total small businesses as defined by the SBA. The solicitation was posted on July 21, 2026, with proposals due by August 22, 2026. The contract is managed by the Oregon State Office within the Department of the Interior, though specific location details and point of contact information are not provided. All work is expected to occur at an undesignated site under the jurisdiction of the federal agency, and bidders must be prepared to comply with federal requirements for site remediation and environmental restoration without reliance on pre-established site specifics.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Protective Coating ApplicationThe contract entails the application of a protective coating system including primer, intermediate, and topcoat layers to rehabilitated bridge surfaces, ensuring full compliance with manufacturer specifications and FP-24 standards. The work is focused on surface preparation and coating application to extend the service life and maintain structural integrity of bridge infrastructure, requiring precise adherence to technical guidelines for durability and environmental resistance. This is a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, with the NAICS code 238290 indicating specialty trade contractors engaged in structural steel and metal fabrication and coating. The solicitation was posted on July 21, 2026, and responses are due by August 22, 2026. The contracting agency is the Oregon State Office under the Department of the Interior, though specific performance location and contact details are not provided. All interested parties must meet small business eligibility requirements and be prepared to execute work in accordance with federal and manufacturer-mandated coating protocols.

Other Building Equipment Contractors

POSTED

DEADLINE

Surface Preparation and Abrasive BlastingThe contract titled Surface Preparation and Abrasive Blasting is a small business set-aside opportunity under the SBA program, reserved exclusively for total small business concerns as defined by FAR 19.5. It requires the removal of existing coatings, rust, and contaminants from steel surfaces on bridges using abrasive blasting or other approved methods to achieve proper surface preparation for new coating applications. The work falls under NAICS code 238290 and is being procured by the Oregon State Office of the Department of the Interior, though specific performance location details including city, state, and zip code are not provided in the data. The solicitation was posted on July 21, 2026, with a response deadline set for August 22, 2026, and it is structured as a subcontract, indicating it may be part of a larger project or prime contract. All work must comply with industry standards for surface preparation to ensure the longevity and integrity of future protective coatings.

Other Building Equipment Contractors

POSTED

DEADLINE

Full Containment System Design and InstallationThe contract calls for the design, engineering, and full installation of a containment system specifically mandated to prevent environmental contamination during bridge coating operations. This includes the development of detailed structural calculations and comprehensive working drawings to ensure the system meets all safety and regulatory requirements. The project requires a specialized understanding of environmental protection measures in active construction zones, particularly around waterways or sensitive ecosystems, and demands precision in execution to guarantee no hazardous materials escape during the coating process. This is a total small business set-aside under the SBA program, restricted solely to small business concerns as defined by FAR 19.5, and falls under NAICS code 238910 for site preparation contractors. The opportunity was posted on July 21, 2026, with a response deadline of August 22, 2026, and is issued as a subcontract. The contracting agency is the Oregon State Office under the U.S. Department of the Interior, though specific performance location details are not provided. All work must be completed in compliance with federal environmental guidelines and structural integrity standards to ensure long-term effectiveness and safety.

Site Preparation Contractors

POSTED

DEADLINE

Mobilization and Site SetupThe contract titled Mobilization and Site Setup is a small business set-aside opportunity under the SBA Total Small Business Set-Aside program, classified under NAICS code 238990 for other specialized construction activities. It requires the contractor to perform full site mobilization including preparation of the work area, coordination of logistics, establishment of temporary facilities, installation of traffic control measures, and completion of initial safety and environmental compliance checks to ensure regulatory readiness prior to main construction activities. The solicitation was posted on July 21, 2026, with a response deadline of August 22, 2026, and is issued by the Oregon State Office under the Department of the Interior. Performance location details are not specified, and the opportunity is exclusively available to qualified small businesses as defined by federal standards. The contract does not provide details on monetary value or duration beyond the mobilization scope described.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Green Procurement and Sustainable Products AdvisoryThe contract seeks advisory services to support the sourcing and verification of environmentally preferable products in accordance with established federal guidelines including the EPA Comprehensive Procurement Guidelines, USDA Biobased Product Program, Energy Star, and Federal Energy Management Program standards. The work involves evaluating product life-cycle impacts, ensuring compliance with sustainability criteria, and providing expert recommendations to align procurement decisions with federal environmental mandates. This is a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses, and is classified under NAICS code 541620 for environmental consulting services. The opportunity is issued by the Oregon State Office of the Department of the Interior with a posted date of July 21, 2026 and a response deadline of August 4, 2026. Performance location details are not specified, and no point of contact information is provided in the posting. Interested parties must respond by the deadline to be considered, and eligibility is restricted to small businesses certified under the SBA’s small business set-aside program. The contract aims to enhance the agency’s ability to implement sustainable procurement practices by integrating recognized eco-labels and environmental performance benchmarks into daily operations.

Environmental Consulting Services

POSTED

DEADLINE

Environmental and Regulatory Compliance SupportThis contract provides advisory services to ensure compliance with federal regulations during material handling and delivery operations, specifically addressing requirements under 29 CFR 1910.1001 for asbestos management, the Endangered Species Act, and the National Historic Preservation Act. The scope involves guiding responsible practices to mitigate environmental and cultural risks, ensuring that all activities align with legal standards to prevent harm to protected species, historic properties, and worker safety. The services are critical for maintaining regulatory alignment throughout logistics and construction-related processes in sensitive areas. The contract is structured as a small business set-aside under the SBA program, classified under NAICS code 541620 for environmental consulting, and is issued by the Department of the Interior through the Oregon State Office. It is open for proposals until August 4, 2026, with no specified place of performance or point of contact listed, indicating that work may occur across various locations under federal jurisdiction where material handling takes place. The subcontract nature implies the selected provider will support a larger entity or project requiring strict adherence to federal environmental and occupational regulations.

Environmental Consulting Services

POSTED

DEADLINE

Logistics and Delivery to Vale, OR (FOB Destination)The contract requires the transportation and final delivery of HDPE pipe coils and reels to the specified warehouse located at 102 WAREHOUSE OREGON STREET, VALE, OR 97918, with all responsibilities and risks transferring to the buyer only upon arrival at the destination, consistent with FOB Destination terms. The work is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid, and the North American Industry Classification System code 484220 applies, indicating a focus on truck transportation of freight. The solicitation was posted on July 21, 2026, with responses due by August 4, 2026, at 9:00 PM Eastern Time, and the contracting authority is the Department of the Interior through the Oregon State Office. The delivery location is clearly defined, and no additional performance locations or point of contact details are provided beyond the destination address.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

7 days ago

DEADLINE

in 7 days

View Details