This Solicitation opportunity from Department Of Defense was posted on July 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

KINGPIN, FIFTH WHEEL

Closed

SPE7L3-26-T-123ZFederal

Submission Closed08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336211

New

Federal

Heavy-Duty Commercial Truck Chassis Provider

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

Bus Body Fabrication and Interior Outfitting

POSTED

DEADLINE

Supply and Delivery of One (1) Combination Sewer Cleaner Truck to Aviano Air Base Italy

Solicitation # FA568226QA073

The 31st Contracting Squadron is soliciting a Firm Fixed Price Purchase Order for the supply and delivery of one heavy-duty combination sewer cleaner truck to Aviano Air Base, Italy, or a consolidation point in New Cumberland, Pennsylvania. The vehicle must be mounted on a heavy-duty commercial chassis and feature a Hydro Drive powertrain system, a minimum engine rating of 370 bhp at 2000 rpm, 15 cubic yards of debris capacity, and at least 2,100 gallons of water capacity. Technical requirements include a tandem axle with a pusher axle, a minimum 10-foot boom extension, and strict adherence to European safety and machinery directives, including the CE mark and specific ISO welding standards. The performance period for delivery is 365 calendar days from the date of award. Award selection will be based on an integrated evaluation of technical capability, prior experience involving one to two relevant projects completed within the last five years, past performance via SPRS and CPARS, and total price reasonableness. Offerors must maintain active registration in the System for Award Management and submit their quotes by September 21, 2026, with prices remaining firm until September 30, 2026. Due to the overseas location, no small business set-aside is applicable for this procurement.

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

Solicitation # ELMEF60232

The U.S. Department of Defense via the Office of FA5000 673 Cons Lgc is conducting market research under solicitation number ELMEF60232 to identify capable vendors for the procurement of one 44-passenger bus and three 14-passenger buses to support the Child and Youth Program at Joint Base Elmendorf-Richardson, Alaska. The buses are intended to transport enrolled youth to and from local elementary schools and School Age Centers, with specifications tailored for cold-weather operations in Anchorage. The 14-passenger buses must be based on the 2027 Blue-Bird Gas Vision Ford Micro Bird G5/D-Series platform with a 7.3L Gas V8 engine, dual rear wheels, and standard cold-weather safety features, while the 44-passenger bus must be a conventional school bus platform equipped with the same engine, Freedman Family 3-point seatbelts, and a comprehensive winter package. Although the requirements reference Blue-Bird models, alternatives meeting all functional and performance criteria are acceptable. The North American Industry Classification System code is 336211 with a size standard of 1,000 employees, and responses are requested from small businesses willing to self-certify status and demonstrate proven capability to deliver the specified vehicles. Interested parties must submit their company name, address, Unique Entity Identifier, CAGE Code, business size classification under NAICS 336211, applicable small business designation, and a point of contact with telephone and email. A brief capabilities statement outlining experience and capacity to fulfill the requirement is also required. The sources sought notice was posted on July 8, 2026, with responses due by July 20, 2026. No contract award is anticipated from this market research, and no solicitation is available at this time; submissions are for information gathering only to inform future procurement decisions. All correspondence and inquiries should be directed to the designated point of contact, Jabreann Thigpen or William Johnson.

POSTED

DEADLINE

Adaptive Driver Seat Installation

POSTED

DEADLINE

Custom Van Interior Upfitting (Ultimaster Specification)

Water & Power Department, Power Delivery

POSTED

DEADLINE

Chassis Systems Integration & Powertrain

Equipment Leasing Authority

POSTED

DEADLINE

Structural Vehicular Frame Supplier (NSN 2510016724469)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Structural Vehicular Frames (NSN 2510015686048)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Rear Hub and Drum Assemblies

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacturing and Supply of Vehicular Structural Frame Sections

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-233V

This solicitation from the Department of Defense Land Supplier Operations Vehicle Support is for the procurement of two metal grilles, identified by NSN 2510-01-197-8147. The contract requires delivery within 168 days after the order is placed and is managed under solicitation number SPE7L3-26-T-233V. Performance is designated for Anniston, Alabama. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a Third-Party Assessment Organization and adherence to protocols for Covered Defense Information. Furthermore, the technical data associated with this item is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training and questionnaires.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

The contract is for the procurement of six KINGPIN, FIFTH WHEEL units identified by NSN 2510011097054 under solicitation SPE7L3-26-T-123Z, issued as a total small business set-aside under NAICS code 336211. Delivery is required FOB Origin with a 157-day lead time, and the original delivery date is March 20, 2027, with a need ship date of January 5, 2027. The item is classified as a critical application item governed by CID A-A-52479 Revision D, and all technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting specifications. The item must be packaged in accordance with ASTM D3951, but only if not overridden by the DLA Master List, and all packaging and labeling must strictly comply with MIL-STD-129, including 2D barcode requirements. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Inspection and acceptance occur at origin, with sampling mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in any sample lot, even if referenced standards like MIL-STD-105 allow for limited defects; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized in the specification. The contract incorporates a comprehensive suite of FAR and DFARS clauses, including those related to combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards, and safeguarding covered defense information. Contractors must comply with the requirement to use Wide Area WorkFlow for invoicing and possess current UEI and CAGE codes. The solicitation is awarded based on small business status and technical acceptability, with no price evaluation preference or trade-off methodology specified; prices are not listed in the provided document. All proposals must be submitted electronically via the DLA BSM portal by the August 5, 2026 deadline, and the contract is subject to deviations from standard FAR clauses including 2

General Info

Six KINGPIN FIFTH WHEEL units, $36 total, FOB origin, DLA specs, MIL-STD-129, zero non-conformances, small business set-aside.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

336211 - Motor Vehicle Body ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

(1)

RFQ SPE7L3-26-T-123Z for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 31

Solicitation

Response DeadlineAug 5

Deadline has passed

Submission Closed

08/05/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressUSA

Contacts

Derek Schmitt

contact@example.gov

+1 (555) 000-0000

Full Description

KINGPIN,FIFTH WHEEL
KINGPIN, FIFTH WHEEL.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
THE SPECIFICATION OR STANDARD CITED IS TO BE
USED IN LIEU OF THE DOCUMENT IDENTIFIED WITHIN
THE PARENTHESES.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC CID A-A-52479 REVISION NR DTD 10/21/1993 PART PIECE NUMBER: IN LIEU OF MS53037
SPE7L3-26-T-123Z
SECTION B
PR: 7017439033 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017439033 0001 EA 6.000
NSN/MATERIAL:2510011097054
DELIVERY (IN DAYS):0157
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE7L3-26-T-123Z
SECTION B
PR: 7017439033 PRLI: 0001 CONT’D
Need Ship Date:01/05/2027 Original Required Delivery Date:03/20/2027
SPE7L3-26-T-123Z NSN/Part Number: 2510-01-109-7054 Quantity: 6 EA Purchase Request: 7017439033QTY: 6 Delivery: 157 days ADO